SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This paper describes the detailed design of the voice digitization technique which has been selected for the Space Shuttle Program. Measured performance results are discussed and the projected characteristics of Shuttle flight hardware are described.
Advances in mass spectrometry (MS) and its applications over the past decade are reviewed in depth, with annotated literature references. New instrumentation and techniques surveyed include: modulated-beam MS, chromatographic MS on-line computer techniques, digital computer-compatible quadrupole MS, selected ion monitoring (mass fragmentography), and computer-aided management of MS data and interpretation. Areas of application surveyed include: organic MS and electron impact MS, field ionization kinetics, appearance potentials, translational energy release, studies of metastable species, photoionization, calculations of molecular orbitals, chemical kinetics, field desorption MS, high pressure MS, ion cyclotron resonance, biochemistry, medical/clinical chemistry, pharmacology, and environmental chemistry and pollution studies.
Hot-wire anemometry and digital techniques are used to develop time series for the streamwise and transverse velocity components and for the mass fraction of helium in the low-speed turbulent boundary layer of air involving the slot injection of helium. Profiles are developed at several streamwise stations. In the present contribution the data are presented principally in terms of conventional, unconditioned averages. It is found that the mean velocity and concentration profiles develop in the downstream direction in the expected fashion but that the intensities of the velocity, concentration, and density fluctuations increase sharply downstream of the slot and peak in the region where the mixing region from the splitter plate impinges on the wall. Close to the wall where the helium concentration is relatively high counterfluxes of helium are found.
Several geometric distortions are present in remotely sensed images depending on the type of sensors and the object being observed. It is often desirable to compensate for these distortions and store the images in reference to a standard coordinate system. Digital techniques for correction are versatile and introduce a minimum of radiometric errors. The main problems to be considered in this area are the determination of the corrective transformation, resampling, and the management of the large quantities of data. It is shown that, by a judicious rearrangement of the input data, considerable reductions in the required memory capacity can be achieved. The rearrangement can be accomplished in several stages. The method presented here is amenable to pipeline implementation for processing a continuous stream of images.
Multidate Landsat imagery has been applied for crop identification purposes in Kern County, California. The county's arid climate provides complete sets of cloud-free imagery throughout the crop-growing season. Both manual and digital techniques are used to study the value of the data, and a semiautomated video system is used to extract densitometric data from Landsat transparencies. It is noted that temporal variations in single-date classification performance and increases in multidate performance are caused by the physiological and phenological differences between types of crops. These differences may be used to introduce crop calendar data into satellite crop surveys.
An overview is presented of the evolution of the computer configuration at JPL's Image Processing Laboratory (IPL). The development of techniques for the geometric transformation of digital imagery is discussed and consideration is given to automated and semiautomated image registration, and the registration of imaging and nonimaging data. The increasing complexity of image processing tasks at IPL is illustrated with examples of various applications from the planetary program and earth resources activities. It is noted that the registration of existing geocoded data bases with Landsat imagery will continue to be important if the Landsat data is to be of genuine use to the user community.
Signal is the term used to denote the characteristic in the time or frequency domain of the probing energy of the system. Processing of this signal in diagnostic ultrasound occurs as the signal travels through the ultrasonic and electrical sections of the apparatus. The paper discusses current signal processing methods, postreception processing, display devices, real-time imaging, and quantitative measurements in noninvasive cardiology. The possibility of using deconvolution in a single transducer system is examined, and some future developments using digital techniques are outlined.
Precise time and time interval (PTTI) technology is becoming increasingly significant to Air Force operations as digital techniques find expanded utility in military missions. Timing has a key role in the function as well as in navigation. A survey of the PTTI needs of several Air Force systems is presented. Current technology supporting these needs was reviewed and new requirements are emphasized for systems as they transfer from initial development to final operational deployment.
Values of mean trabecular spacing computed from optical diffraction patterns of 1:1 X-ray micrographs of tibial metaphysis and those obtained by standard image digitization techniques show excellent agreement. Upper limits on values of mean trabecular orientation deduced from diffraction patterns and the images are also in excellent agreement. Values of the ratio of mean trabecular spatial density in a region of 300 micrometers distal to the downwardly directed convexity in the cartilage growth plate to the value adjacent to the plate determined for flight animals sacrificed at recovery were significantly smaller than values for vivarium control animals. No significant differences were found in proximal regions. No significant differences in mean trabecular orientation were detected. Decreased values of trabecular spatial density and of both obsteoblastic activity and trabecular cross-sectional area noted in collateral researches suggest decreased modeling activity under weightlessness.
The ability of two widely dissimilar spaceborne imaging sensors to detect surface oil accumulations in the marine environment has been evaluated using broadly different techniques. Digital Landsat multispectral scanner (MSS) data consisting of two visible and two near infrared channels has been processed to enhance contrast between areas of known oil coverage and background clean surface water. These enhanced images have then been compared to surface verification data gathered by aerial reconnaissance during the October 15, 1975, Landsat overpass. A similar evaluation of oil slick imaging potential has been made for digitally enhanced Seasat-A synthetic aperture radar (SAR) data from July 18, 1979. Due to the premature failure of this satellite, however, no concurrent surface verification data were collected. As a substitute, oil slick configuration information has been generated for the comparison using meteorological and oceanographic data. The test site utilized in both studies was the extensive area of natural seepage located off Coal Oil Point, adjacent to the University of California, Santa Barbara.
Future requirements for Shuttle Orbiter downlink communication may include transmission of digital video which, in addition to black and white, may also be either field-sequential or NTSC color format. The use of digitized video could provide for picture privacy at the expense of additional onboard hardware, together with an increased bandwidth due to the digitization process. A general objective for the Space Shuttle application is to develop a digitization technique that is compatible with data rates in the 20-30 Mbps range but still provides good quality pictures. This paper describes a tri-state delta modulation/demodulation (TSDM) technique which is a good compromise between implementation complexity and performance. The unique feature of TSDM is that it provides for efficient run-length encoding of constant-intensity segments of a TV picture. Axiomatix has developed a hardware implementation of a high-speed TSDM transmitter and receiver for black-and-white TV and field-sequential color. The hardware complexity of this TSDM implementation is summarized in the paper.
An analysis is presented of a digital technique for the coherent demodulation of a residual carrier signal with a biphase modulated square wave subcarrier. The processing technique employs the concept of intermediate frequencies IF sampling. An optimum Costas loop is used for subcarrier demodulation and data-aided carrier tracking, i.e., combined Costas and residual carrier tracking. It is shown that the loops perform essentially the same as the corresponding analog loops in terms of signal-to-noise ratio and loop bandwidth. The sampling does not introduce biases or other significant effects on the loops, provided that the loop bandwidth is very small compared to the symbol rate, and that the number of samples per symbol is large compared to inverse loop bandwidth.
Systems for making automatic noise figure measurements of millimeter wave mixers have been developed using both analog and digital techniques. The effect of IF mismatch on the measured noise figures is also determined with these methods (Forsythe, 1982). The measurement systems are versatile enough to be used to measure the noise figure of receivers anywhere from 30 to 300 GHz.
An all-digital technique for the Baud Integrators of the Radar High-Speed Data Acquisition system, a technique that avoids the inherent problems associated with analog systems such as the need for calibration and adjustment is described. The integration period of this system is selectable in 100-ns steps from 100 ns to 3276700 ns.
Abstract- Digital techniques for separation of luminance and chrominance components from composite NTSC broadcast television signals are explored. First, comb filters are introduced. Secondly, filters based on linear regression are developed. Finally, a third filtering form, the allpass filter is considered. Techniques are compared based on mean squared error criteria and subjective testing. It is demonstrated that the allpass filtering technique is superior to both the comb filtering as well as the regression filtering.
Discovery of a large thermal anomaly in the western Arabian highlands on Landsat TM imagery is reported. The anomaly, 15 C warmer than surroundings, forms a 2-km-wide arc around the southern flank of Jebel Chada, a volcano active in 1256 AD. It is recorded by AVHRR imagery as well, despite the 1.1-km spatial resolution of this sensor. Air photos and geologic maps show no bedrock unit that corresponds to the anomaly. Digital techniques were applied to the TM and AVHRR data, including contrast enhancement, density slicing, principal components analysis, and construction of multiband composite images. It is concluded that the anomaly results from a thin cover of volcanic ash or cinder that is optically indistinguishable from underlying basalt, rather than from internal (volcanic or hydrologic) heat sources.
This conference discusses health management systems for liquid rocket engines, signal processing of spectroscopic data for engine diagnostic applications, real-time diagnostics of the reusable rocket engine using on-line system identification, and nonlinear parameter estimation for rocket engine health monitoring. Plume diagnostics are considered including discussion on preliminary plume diagnostics on the SSME using video digitization techniques and baseline plume emmissions. The development of a Fabry-Perot Interferometer for rocket engine plumes is also considered. The topic of computational modeling is also discussed, addressing such topics as probabalistic dynamics of material loss in the SSME turbomachinery, state-variable modelling of fluid-dynamics processes, and a model for the SSME high pressure oxidizer turbopump shaft seal system. A discussion of sensor development includes the topics of sensor development for the rocket engine condition monitoring system and the heat flux measurements in SSME turbine blade tester.
Video digitization techniques have been developed to analyze the exhaust plume of the Space Shuttle Main Engine. Temporal averaging and a frame-by-frame analysis provide data used to evaluate the capabilities of image processing techniques for use as measurement tools. Capabilities include the determination of the necessary time requirement for the Mach disk to obtain a fully-developed state. Other results show the Mach disk tracks the nozzle for short time intervals, and that dominate frequencies exist for the nozzle and Mach disk movement.