Experimental Investigation of a Method of Wave-drag Reduction for Combinations Employing Quasi-cylindrical Bodies and Swept Wings at Supersonic Speeds
Explore the source record for details and available documents.
Hickey, Daniel P↗
SEARCH · Search NASA
Results for “DRAG REDUCTION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An Initial Flight Investigation of Formation Flight for Drag Reduction on the C-17 Aircraft
Explore the source record for details and available documents.
Joe Pahle↗
Reduction of Base Drag on Launch Vehicles
This report describes the work accomplished during a first-year investigation of base drag reduction for launch vehicles. Interest in this work has arisen due to the large base areas associated with the current generation of launch vehicles. For example, the X-33 and Venture Star configurations all have large base areas because of the aero-spike engines they use. Because of the large base-to-wetted area ratios of these vehicles, the majority of the vehicle drag is due to base drag. Based on previous research, there appears to be a means for reducing the base drag on such vehicles. A clear relationship between viscous fore-body drag and base drag was demonstrated. For subsonic flow conditions, an increase in fore-body drag causes a decrease in base drag. This base-drag reduction is a result of boundary layer effects at the base of the vehicle. The shear layer that develops from the boundary layer separating at the back of the vehicle is the conduit through which momentum is transferred from the high energy free-stream flow to the low-energy fluid in the base area. One way to think of the base drag is that it is the momentum required to accelerate this low-energy fluid. The boundary layer that develops on the fore body acts as an "insulator" between the external flow and the low-energy air at the base. As the viscous fore-body drag is increased, the boundary layer thickness at the aft end of the fore body increases, thereby reducing the rate at which momentum is transferred to the base area. As a result of the lower momentum transfer (or reduced pumping), the base pressure coefficient rises resulting in a reduction of base drag.
Naughton, Jonathan↗
Active Flow Effectors for Noise and Separation Control
New flow effector technology for separation control and enhanced mixing is based upon shape memory alloy hybrid composite (SMAHC) technology. The technology allows for variable shape control of aircraft structures through actively deformable surfaces. The flow effectors are made by embedding shape memory alloy actuator material in a composite structure. When thermally actuated, the flow effector def1ects into or out of the flow in a prescribed manner to enhance mixing or induce separation for a variety of applications, including aeroacoustic noise reduction, drag reduction, and f1ight control. The active flow effectors were developed for noise reduction as an alternative to fixed-configuration effectors, such as static chevrons, that cannot be optimized for airframe installation effects or variable operating conditions and cannot be retracted for off-design or fail-safe conditions. Benefits include: Increased vehicle control, overall efficiency, and reduced noise throughout all f1ight regimes, Reduced flow noise, Reduced drag, Simplicity of design and fabrication, Simplicity of control through direct current stimulation, autonomous re sponse to environmental heating, fast re sponse, and a high degree of geometric stability. The concept involves embedding prestrained SMA actuators on one side of the chevron neutral axis in order to generate a thermal moment and def1ect the structure out of plane when heated. The force developed in the host structure during def1ection and the aerodynamic load is used for returning the structure to the retracted position. The chevron design is highly scalable and versatile, and easily affords active and/or autonomous (environmental) control. The technology offers wide-ranging market applications, including aerospace, automotive, and any application that requires flow separation or noise control.
Turner, Travis L.↗
Aircraft Drag Reduction-A Review
The paper summarizes the state of the art in aeronautical drag reduction across the speed range for the conventional drag components of viscous drag, drag due to lift and wave drag. It also describes several emerging drag-reduction approaches that are either active or reactive/interactive and the drag reduction potentially available from synergistic combinations of advanced configuration aerodynamics, viscous drag-reduction approaches, revolutionary structural concepts and propulsion integration.
Bushnell, D. M.↗
Computational analysis of methods for reduction of induced drag
The purpose of this effort was to perform a computational flow analysis of a design concept centered around induced drag reduction and tip-vortex energy recovery. The flow model solves the unsteady three-dimensional Euler equations, discretized as a finite-volume method, utilizing a high-resolution approximate Riemann solver for cell interface flux definitions. The numerical scheme is an approximately-factored block LU implicit Newton iterative-refinement method. Multiblock domain decomposition is used to partition the field into an ordered arrangement of blocks. Three configurations are analyzed: a baseline fuselage-wing, a fuselage-wing-nacelle, and a fuselage-wing-nacelle-propfan. Aerodynamic force coefficients, propfan performance coefficients, and flowfield maps are used to qualitatively access design efficacy. Where appropriate, comparisons are made with available experimental data.
Janus, J. M.↗
Dividers for reduction of aerodynamic drag of vehicles with open cavities
A drag-reduction concept for vehicles with open cavities includes dividing a cavity into smaller adjacent cavities through installation of one or more vertical dividers. The dividers may extend the full depth of the cavity or only partial depth. In either application, the top of the dividers are typically flush with the top of the bed or cargo bay of the vehicle. The dividers may be of any material, but are strong enough for both wind loads and forces encountered during cargo loading/unloading. For partial depth dividers, a structural angle may be desired to increase strength.
Storms, Bruce L.↗
Aircraft drag prediction and reduction. Addendum 1: Computational drag analyses and minimization; mission impossible?
The Special Course on Aircraft Drag Prediction was sponsored by the AGARD Fluid Dynamics Panel and the von Karman Institute and presented at the von Karman Institute, Rhode-Saint-Genese, Belgium, on 20 to 23 May 1985 and at the NASA Langley Research Center, Hampton, Virginia, USA, 5 to 6 August 1985. The course began with a general review of drag reduction technology. Then the possibility of reduction of skin friction through control of laminar flow and through modification of the structure of the turbulence in the boundary layer were discussed. Methods for predicting and reducing the drag of external stores, of nacelles, of fuselage protuberances, and of fuselage afterbodies were then presented followed by discussion of transonic drag rise. The prediction of viscous and wave drag by a method matching inviscid flow calculations and boundary layer integral calculations, and the reduction of transonic drag through boundary layer control are also discussed. This volume comprises Paper No. 9 Computational Drag Analyses and Minimization: Mission Impossible, which was not included in AGARD Report 723 (main volume).
Slooff, J. W.↗
Reduction of Helicopter Parasite Drag
A reduction in helicopter parasite drag is possible but not profitable except in those cases where high speed and long range are primary requirements . For some of the factors causing drag, reduction in parasite-drag area may result in increased weight whereas, in other cases, it does not. The final design, however, must be a compromise between the reduction of drag and the increase in weight .
Robert D Harrington↗
Study of turbulence structure through numerical simulations: The perspective of drag and reduction
The first part of this note concerns organized structures in the near-wall region of a turbulent boundary layer. A particular emphasis is given to those organized motions believed to be responsible for the turbulence production process in the wall region, and hence, indirectly responsible for the viscous drag. Examples are selected to illustrate how the analyses of numerically generated databases have contributed to improve our understanding of the organized structures of turbulent boundary layers. In the second part, results from an exploratory study based on the direct numerical simulation of the concepts for active control of turbulent boundary layers are presented. A significant drag reduction is achieved when the surface boundary condition is modified such that it could suppress the organized motion in the wall region. This drag reduction is accompanied by a significant reduction in the intensity of the organized structures and in the magnitude of Reynolds stresses throughout the flow.
Kim, J. J.↗
Reduction of hub- and pylon-fairing drag
A wind tunnel test was conducted to obtain data on several drag reduction methods for rotorcraft hubs. The objective of the test was to use small-scale models to develop the technology to substantially reduce hub drag. A helicopter test model, which did not incorporate a rotor, was used to study single-rotor fairing configurations. The rotor shaft assembly was modeled with nonrotating hardware. Drag trend data was obtained for the following fairing configuration changes: hub-fairing camber, hub-fairing thickness ratio, hub-fairing surface curvature, hub-fairing height with respect to the fuselage, inclusion of blade shanks in the hub fairings, hub- and pylon-fairing gaps, pylon-fairing cross-sectional geometry, pylon-fairing thickness ratio and camber. Substantial drag reductions could potentially result from application of the test results to helicopter hub- and pylon-fairing design.
Young, Larry A.↗
Elastically Shaped Wing Optimization and Aircraft Concept for Improved Cruise Efficiency
This paper presents the findings of a study conducted tn 2010 by the NASA Innovation Fund Award project entitled "Elastically Shaped Future Air Vehicle Concept". The study presents three themes in support of meeting national and global aviation challenges of reducing fuel burn for present and future aviation systems. The first theme addresses the drag reduction goal through innovative vehicle configurations via non-planar wing optimization. Two wing candidate concepts have been identified from the wing optimization: a drooped wing shape and an inflected wing shape. The drooped wing shape is a truly biologically inspired wing concept that mimics a seagull wing and could achieve about 5% to 6% drag reduction, which is aerodynamically significant. From a practical perspective, this concept would require new radical changes to the current aircraft development capabilities for new vehicles with futuristic-looking wings such as this concept. The inflected wing concepts could achieve between 3% to 4% drag reduction. While the drag reduction benefit may be less, the inflected-wing concept could have a near-term impact since this concept could be developed within the current aircraft development capabilities. The second theme addresses the drag reduction goal through a new concept of elastic wing shaping control. By aeroelastically tailoring the wing shape with active control to maintain optimal aerodynamics, a significant drag reduction benefit could be realized. A significant reduction in fuel burn for long-range cruise from elastic wing shaping control could be realized. To realize the potential of the elastic wing shaping control concept, the third theme emerges that addresses the drag reduction goal through a new aerodynamic control effector called a variable camber continuous trailing edge flap. Conventional aerodynamic control surfaces are discrete independent surfaces that cause geometric discontinuities at the trailing edge region. These discontinuities promote vorticities which result in drag rises as well as noise sources. The variable camber trailing edge flap concept could provide a substantial drag reduction benefit over a conventional discrete flap system. Aerodynamic simulations show a drag reduction of over 50% could be achieved with the flap concept over a conventional discrete flap system.
Nguyen, Nhan↗
Turbulent drag characteristic of small amplitude rigid surface waves
The paper discusses an experimental and theoretical investigation of low speed turbulent flow over transverse rigid wavy surfaces having a wavelength on the order of the boundary layer thickness. In addition the results of theoretical investigations of laminar flow over short wavelength waves and turbulent flow over long wavelength (wavelength much greater than the boundary layer thickness) wavy walls are presented. Surface pressure and net drag measurements obtained for the short wavelength symmetric and asymmetric waves in a turbulent flow agreed with the results obtained with a Navier-Stokes spectral code and indicated no significant drag reduction. Several asymmetric wave configurations did significantly reduce the pressure drag compared to sine wave geometries, but these waves still did not produce a net drag reduction. The Navier-Stokes calculations for laminar flow indicated a drag reduction of up to 17 percent for certain short wavelength waves. Boundary layer calculations for turbulent flow over long wavelength surface waves indicated that net drag reductions on the order of 10 percent may be possible for large-radius waisted bodies.
Lin, J. C.↗
Improving Marine Energy Production Through Commercialization of a Low Cost, Drag-Reducing Slippery Coating (CRADA 679 Abstract)
Marine energy capture systems offer great promise for providing clean energy, but they operate in a challenging and dynamic environment and must be optimized to the highest extent possible. Computational studies predict that drag reduction on marine energy and blue economy systems will result in meaningful improvements in energy efficiency. Based on extensive coating experience, PNNL is proposing to bring to market a new drag-reducing coating called Superhydrophobic Lubricant-Infused Drag-Efficient Coating – SLIDE-Coat. PNNL has a deep knowledge base regarding this class of slippery coatings, and we have a group of enthusiastic industry partners who have committed to partnering, conducting field testing, and providing well over 50% cost share. In addition to validating the technology, the team will create a commercialization roadmap to ensure the commercial success of the technology after the government-sponsored two-year program is complete. The main technical goal is to design, manufacture, and experimentally validate a new coating that can reduce hydrodynamic skin friction drag by 20%. The main commercialization goal is to develop a roadmap that identifies activities needed to complete SLIDE-Coat’s development after the conclusion of this project. Year 1 will focus on adaptation and modification of the existing SLIC coating system to optimize drag reduction and assessment and quantification of drag reduction on relevant materials in a laboratory setting. Year 2 will focus on optimizing and demonstrating drag reduction with preferred coatings. The manufacturability, ease of application, adhesion to relevant surfaces, and consistency will be assessed. Quantification of drag reduction on prototype materials in a relevant marine field setting will be executed.
16 TIDAL AND WAVE POWER↗
Investigation of the vortex flap concept on a 75-deg sweep delta wing at supersonic speeds
An experimental investigation of the aerodynamic performance of vortex flaps on a 75-deg sweep delta wing has been conducted in the NASA Langley Unitary Plan Wind Tunnel at Mach numbers from 1.7 to 2.8. The sharp leading edge vortex flaps consisted of the outboard 30 percent of the local wing semispan. Flap deflections of 0, 5, 10, and 15 deg were investigated, for both a wing-alone and a wing-body configuration. The flaps were effective in reducing the drag across the lift-coefficient range. Integration of the upper surface pressure distributions showed that the suction pressures induced by the vortex on the flap were responsible for the drag reductions. At some lift conditions, the minimum drag condition permitted hinge line separation or vortex migration inboard of the hinge line. This result is in contrast to subsonic results, where optimum conditions call for no hinge line separation. The magnitude of the drag reduction due to flap deflection generally decreased as Mach number increased. The effect of a cylindrical forebody on the drag reduction due to flap deflection was minimal.
Covell, Peter F.↗
Direct Numerical Simulations of High-Speed Turbulent Boundary Layers over Riblets
Direct numerical simulations (DNS) of spatially developing turbulent boundary layers over riblets with a broad range of riblet spacings are conducted to investigate the effects of riblets on skin friction at high speeds. Zero-pressure gradient boundary layers under two flow conditions (Mach 2:5 with T(sub w)/T(sub r) = 1 and Mach 7:2 with T(sub w)/T(sub r) = 0:5) are considered. The DNS results show that the drag-reduction curve (delta C(sub f)/C(sub f) vs l(sup +)(sub g )) at both supersonic speeds follows the trend of low-speed data and consists of a `viscous' regime for small riblet size, a `breakdown' regime with optimal drag reduction, and a `drag-increasing' regime for larger riblet sizes. At l l(sup +)(sub g) approx. 10 (corresponding to s+ approx 20 for the current triangular riblets), drag reduction of approximately 7% is achieved at both Mach numbers, and con rms the observations of the few existing experiments under supersonic conditions. The Mach- number dependence of the drag-reduction curve occurs for riblet sizes that are larger than the optimal size, with smaller slopes of (delta C(sub f)/C(sub f) for larger freestream Mach numbers. The Reynolds analogy holds with 2(C(sub h)=C(sub f) approximately equal to that of at plates for both drag-reducing and drag-increasing configurations.
Duan, Lian↗
Goals for a future SST
The paper attempts to define a desirable and reachable goal for a second generation SST. Justifications for the need of an SST are considered as is the ecological impact of a second generation SST project. Required technology advances to reach the range of 6500 nautical miles are examined along with structural weight reduction and drag reduction. Possible performance improvements due to design modifications are discussed, and environmental problems are discussed in detail with emphasis on sonic booms.
Ferri, A.↗