SEARCH · Search NASA

Results for “Data frames”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Control and Non-Payload Communications (CNPC) Prototype Radio Validation Flight Test Report

This report provides an overview and results from the unmanned aircraft (UA) Control and Non-Payload Communications (CNPC) Generation 5 prototype radio validation flight test campaign. The radios used in the test campaign were developed under cooperative agreement NNC11AA01A between the NASA Glenn Research Center and Rockwell Collins, Inc., of Cedar Rapids, Iowa. Measurement results are presented for flight tests over hilly terrain, open water, and urban landscape, utilizing radio sets installed into a NASA aircraft and ground stations. Signal strength and frame loss measurement data are analyzed relative to time and aircraft position, specifically addressing the impact of line-of-sight terrain obstructions on CNPC data flow. Both the radio and flight test system are described.

Shalkhauser, Kurt A.↗

NASA NTRS2019

Rest-Frame UV and Optical Emission Line Diagnostics of Ionized Gas Properties: a Test Case in a Star-Forming Knot of a Lensed Galaxy at Z ∼ 1.7

We examine the diagnostic power of rest-frame ultraviolet (UV) nebular emission lines, and compare them to more commonly used rest-frame optical emission lines, using the test case of a single star-forming knot of the bright lensed galaxy RCSGA 032727–132609 at redshift z ∼ 1.7. This galaxy has complete coverage of all the major rest-frame UV and optical emission lines from Magellan/MagE and Keck/NIRSPEC. Using the full suite of diagnostic lines, we infer the physical properties: nebular electron temperature (T(sub e)), electron density (n(sub e)), oxygen abundance (log (O/H), ionization parameter [log (q), and interstellar medium (ISM) pressure (log (P/k)]. We examine the effectiveness of the different UV, optical, and joint UV–optical spectra in constraining the physical conditions. Using UV lines alone we can reliably estimate log (q), but the same is difficult for log (O/H). UV lines yield a higher (∼1.5 dex) log (P/k) than the optical lines, as the former probes a further inner nebular region than the latter. For this comparison, we extend the existing Bayesian inference code IZI, adding to it the capability to infer ISM pressure simultaneously with metallicity and ionization parameter. This work anticipates future rest-frame UV spectral data sets from the James Webb Space Telescope (JWST) at high redshift and from the Extremely Large Telescope (ELT) at moderate redshift.

Acharyya, Ayan↗

NASA NTRS1987

TDRS Ku band gateway

The Wideband Transport Frame Formatter (WTFF) is the tracking and data relay satellite (TDRS) ku-band return link gateway. The WTFF system is a multiplexing device developed to process and downlink the high rate data generated by a wide variety of users. The WTFF is designed to frame and format high data rate user channels into transport frames and multiplex according to a predefined schedule into two bit streams that are compatible with TDRS Ku I and Q band service. The combined data rate will be 300 Mbps. The WTFF will service up to eight input channels generating data in the range of 10 to 150 Mbps. In addition to these input channels, audio data will be accepted by the WTFF system and inserted in the downlink. A second function of the WTFF is to provide telecommunication coding as assigned to each virtual channel to ensure a given quality of service.

Collins, Cynthia↗

NASA NTRS1975

Anisotropy measurements of nearly 50 KeV solar protons

The Energetic Particles Experiment on IMP-7 measures the angular distribution of 50-200 keV solar protons in 16 sectors. The velocity of 50 keV protons may be less than 5 times that of the solar wind. A generalized nonlinear Compton-Getting point transformation into the co-moving frame that contains no assumptions as to the angular distribution of either the spectrum or intensity is presented. Nearly 50 keV proton data in the spacecraft frame exhibit an anisotropy ratio that is large (not less than 5) and radial throughout the October 29, 1972 event lasting more than 9 days at this energy. This anisotropy argues against impulsive injection and diffusive decay in the inner solar system. Application of the transformation to the data reveals a long lasting residual anisotropy in the co-moving frame with protons streaming from the sun. Differences between the co-moving frame and solar wind frame velocities suggest residual electric fields upstream from the bow shock.

Gold, R. E.↗

NASA NTRS1992

The Martian dust cycle

Martian dust plays a key role in determining the current climate of Mars, and is suspected of having had a major influence on the evolution of the surface and the history of climatic conditions on the planet. From spacecraft and ground-based observations, some understanding has been acquired of the styles and frequency of dust motion in the atmosphere and at the surface, of atmospheric dust loading, dust particle properties, and their variability. Limited constraints have also been derived for the volumes and ages of some potential dust reservoirs on the surface. These data are adequate to frame questions about the seasonal and long-term cycles of dust of Mars. Additional data are needed to place quantitative constraints on components of these cycles, on their possible linkage to one another, and to draw conclusions from the dust budget about the climate history of Mars.

Kahn, R. A.↗

NASA NTRS1978

Measurements of unsteady vortex flow fields

A combined surface hot film and laser velocimeter measurement technique, used to obtain new information on the mean, constant phase-averaged and turbulent structure of time-dependent flow fields, is described. Data obtained in a cylinder wake are presented, and its structure in both the Eulerian and Lagrangian frames is discussed. Turbulence data obtained by conventional and conditional averaging of the velocity fluctuations are also presented. These data provide details of the small- and large-scale contributions to the total turbulent field.

Owen, F. K.↗

NASA NTRS2020

TESS Data Release Notes: Sector 21 DR 29

These Data Release Notes provide information on the processing and export of data from the Transiting Exoplanet Survey Satellite (TESS). The data products included in this data release are full frame images (FFIs), target pixel les, light curve les, collateral pixel les, cotrending basis vectors (CBVs), and Data Validation (DV) reports, time series, and associated xml les. These data products were generated by the TESS Science Processing Operations Center (SPOC, Jenkins et al., 2016) at NASA Ames Research Center from data collected by the TESS instrument, which is managed by the TESS Payload Operations Center (POC) at Massachusetts Institute of Technology (MIT). The format and content of these data products are documented in the Science Data Products Description Document (SDPDD)1. The SPOC science algorithms are based heavily on those of the Kepler Mission science pipeline, and are described in the Kepler Data Processing Handbook (Jenkins, 2017).2 The Data Validation algorithms are documented in Twicken et al. (2018) and Li et al. (2019). The TESS Instrument Handbook (Vanderspek et al., 2018) contains more information about the TESS instrument design, detector layout, data properties, and mission operations. The TESS Mission is funded by NASA's Science Mission Directorate.

Michael M. Fausnaugh↗

NASA NTRS2022

TESS Data Release Notes: Sector 47, DR67

TESS↗

NASA NTRS2022

TESS Data Release Notes:Sector 48, DR70

TESS↗

NASA NTRS2022

TESS Data Release Notes: Sector 49, DR71

TESS↗

NASA NTRS2022

TESS Data Release Notes: Sector 57, DR82

TESS↗

NASA NTRS2006

The Development of New Solar Indices for use in Thermospheric Density Modeling

New solar indices have been developed to improve thermospheric density modeling for research and operational purposes. Out of 11 new and 4 legacy indices and proxies, we have selected three (F10.7, S10.7, and M10.7) for use in the new JB2006 empirical thermospheric density model. In this work, we report on the development of these solar irradiance indices. The rationale for their use, their definitions, and their characteristics, including the ISO 21348 spectral category and sub-category, wavelength range, solar source temperature region, solar source feature, altitude region of terrestrial atmosphere absorption at unit optical depth, and terrestrial atmosphere thermal processes in the region of maximum energy absorption, are described. We also summarize for each solar index, the facility and instrument(s) used to observe the solar emission, the time frame over which the data exist, the measurement cadence, the data latency, and the research as well as operational availability. The new solar indices are provided in forecast (http://SpaceWx.com) as well as real-time and historical (http://sol.spacenvironment.net/~jb2006/) time frames. We describe the forecast methodology, compare results with actual data for active and quiet solar conditions, and compare improvements in F10.7 forecasting with legacy High Accuracy Satellite Drag Model (HASDM) and NOAA SEC forecasts.

Tobiska, W. Kent↗

NASA NTRS2001

Biogeochemical Response to Mesoscale Physical Forcing in the California Current System

In the first part of the project, we investigated the local response of the coastal ocean ecosystems (changes in chlorophyll, concentration and chlorophyll, fluorescence quantum yield) to physical forcing by developing and deploying Autonomous Drifting Ocean Stations (ADOS) within several mesoscale features along the U.S. west coast. Also, we compared the temporal and spatial variability registered by sensors mounted in the drifters to that registered by the sensors mounted in the satellites in order to assess the scales of variability that are not resolved by the ocean color satellite. The second part of the project used the existing WOCE SVP Surface Lagrangian drifters to track individual water parcels through time. The individual drifter tracks were used to generate multivariate time series by interpolating/extracting the biological and physical data fields retrieved by remote sensors (ocean color, SST, wind speed and direction, wind stress curl, and sea level topography). The individual time series of the physical data (AVHRR, TOPEX, NCEP) were analyzed against the ocean color (SeaWiFS) time-series to determine the time scale of biological response to the physical forcing. The results from this part of the research is being used to compare the decorrelation scales of chlorophyll from a Lagrangian and Eulerian framework. The results from both parts of this research augmented the necessary time series data needed to investigate the interactions between the ocean mesoscale features, wind, and the biogeochemical processes. Using the historical Lagrangian data sets, we have completed a comparison of the decorrelation scales in both the Eulerian and Lagrangian reference frame for the SeaWiFS data set. We are continuing to investigate how these results might be used in objective mapping efforts.

Niiler, Pearn P.↗

NASA NTRSDate not supplied

Deep Learning Vetting of TESS FFI Data: Results and Comparison with 2-Min Data

We present the results of vetting TCEs from the TESS SPOC full-frame images (FFI) Year 5 data using our deep learning model, and we compare the performance in this dataset against the results obtained for the TESS SPOC 2-min data. The 200-second cadence FFI data expands the search to a list of targets that not only includes 2-minute targets, but also potentially high-value targets within 100 parsecs or with H-magnitude <10, and field targets with TESS magnitude <13.5. This work aims to explore this rich dataset and increase the efficiency and throughput of the vetting process by helping unearth more high-quality planet candidates from the TESS mission.

tess spoc↗

NASA NTRS1989

Robotic Target-Tracking Subsystem

Position and orientation of target measured in six degrees of freedom. Robotic vision subsystem measures relative position and orientation of specially designed target. Uses standard image-processing algorithms implemented directly in circuitry instead of computer programs. This feature makes it possible to extract complete sets of target-tracking data from successive image frames at rate of 30 frames per second. Five bright circles of target positioned in such way that video images of them processed into data on position and orientation of target relative to camera. Subsystem useful in industrial assembly operation requiring automatic joining of parts initially oriented and moving randomly.

Shawaga, Lawrence M.↗

NASA NTRS2002

Evaluation of GEOSAT Follow-On Precise Orbit Ephemeris

The GEOSAT Follow-On spacecraft (GFO-l), launched in 1998, began continuous radar altimeter coverage of the oceans in 2000, and after an extensive series of calibration campaigns in 1999 and 2000 was finally accepted by the US Navy on November 29, 2000. By providing high quality altimeter data, GFO can supplement TOPEX/POSEIDON(T/P), ERS-1, and ERS-2 data, providing a different synoptic sampling of the oceans with its 17-day ground track repeat cycle. Altimeter analysis suggests GFO is capable of POSEIDON class altimetry, with orbit error the largest contributor to the GFO altimeter error budget. Satellite laser ranging (SLR), especially in combination with altimeter crossover data, offer the only means of determining high-quality precise orbits. SLR tracking is also augmented by Doppler (Tranet style) beacons. These data were used to tune the gravity field and macromodel (3D representation of the spacecraft geometry and surface properties). Beginning with January 2000 GSFC has produced a 2.5 year span of the Precision Orbit Ephemeris (POE) intended for use on the GFO GDR and for the Pathfinder Project. Using GFO GDR and IGDR altimeter data from NOAA, a two year span of POE orbits are evaluated with respect to the TOPEX orbits by adjusting the GFO data into the TOPEX frame with the help of TOPEX/GFO altimeter crossovers. A 2.5 year span of orbits are also evaluated using tracking data residual analysis, GFO altimeter crossover residual analysis, and direct orbit comparison. In an effort to improve the current POE orbit several ideas are considered, including using recent gravity models which include CHAMP data, the reduced-dynamic approach, and including TOPEX/GFO altimeter crossover data in the orbit solution.

Lemoine, Frank G.↗

NASA NTRS2010

Interference-free ultrasound imaging during HIFU therapy, using software tools

Disclosed herein is a method for obtaining a composite interference-free ultrasound image when non-imaging ultrasound waves would otherwise interfere with ultrasound imaging. A conventional ultrasound imaging system is used to collect frames of ultrasound image data in the presence of non-imaging ultrasound waves, such as high-intensity focused ultrasound (HIFU). The frames are directed to a processor that analyzes the frames to identify portions of the frame that are interference-free. Interference-free portions of a plurality of different ultrasound image frames are combined to generate a single composite interference-free ultrasound image that is displayed to a user. In this approach, a frequency of the non-imaging ultrasound waves is offset relative to a frequency of the ultrasound imaging waves, such that the interference introduced by the non-imaging ultrasound waves appears in a different portion of the frames.

Vaezy, Shahram↗

NASA NTRS2020

TESS Data Release Notes: Sector 24, DR35

These Data Release Notes provide information on the processing and export of data from the Transiting Exoplanet Survey Satellite (TESS). The data products included in this data release are full frame images (FFIs), target pixel fi les, light curve fi les, collateral pixel fi les, cotrending basis vectors (CBVs), and Data Validation (DV) reports, time series, and associated xml fi les. These data products were generated by the TESS Science Processing Operations Center (SPOC, Jenkins et al., 2016) at NASA Ames Research Center from data collected by the TESS instrument, which is managed by the TESS Payload Operations Center (POC) at Massachusetts Institute of Technology (MIT). The format and content of these data products are documented in the Science Data Products Description Document (SDPDD). The SPOC science algorithms are based heavily on those of the Kepler Mission science pipeline, and are described in the Kepler Data Processing Handbook (Jenkins, 2019).2 The Data Validation algorithms are documented in Twicken et al. (2018) and Li et al. (2019). The TESS Instrument Handbook (Vanderspek et al., 2018) contains more information about the TESS instrument design, detector layout, data properties, and mission operations. The TESS Mission is funded by NASA's Science Mission Directorate.

TESS↗