Search NASA⌕ Search

SEARCH · Search NASA

Results for “Development Plan”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Space Station battery system design and development

The Space Station Electric Power System will rely on nickel-hydrogen batteries in its photovoltaic power subsystem for energy storage to support eclipse and contingency operations. These 81-Ah batteries will be designed for a 5-year life capability and are configured as orbital replaceable units (ORUs), permitting replacement of worn-out batteries over the anticipated 30-year Station life. This paper describes the baseline design and the development plans for the battery assemblies, the battery ORUs and the battery system. Key elements reviewed are the cells, mechanical and thermal design of the assembly, the ORU approach and interfaces, and the electrical design of the battery system. The anticipated operational approach is discussed, covering expected performance as well as the processor-controlled charge management and discharge load allocation techniques. Development plans cover verification of materials, cells, assemblies and ORUs, as well as system-level test and analyses.

Haas, R. J.↗
NASA NTRSDate not supplied

Crew Health and Performance (CHP) Technology Roadmaps

The Environmental Control and Life Support System (ECLSS) – Crew Health and Performance (CHP) Systems Capability Leadership Team (SCLT) is a community of practice (not a funded program) sponsored by Headquarters to develop, retain, and infuse the ECLSS and CHP capabilities necessary to enable the human exploration of the Moon and Mars through the integration and empowerment of experts across NASA, other government agencies, commercial industry, and academia. The goals of the SCLT are as follows: Use the Architecture Definition Document use cases and functions to identify gaps in NASA’s current technological capabilities to meet Agency objectives and develop strategies and roadmaps for closing such gaps Make technical/strategic recommendations on ECLSS and CHP technology development efforts and investments for PPBE, acquisition strategies, and leveraging NASA’s critical capabilities Establish key performance parameters and participate in key program and project reviews Maintain cognizance of relevant ECLSS and CHP national and international technology activities in government, industry, and academia, specifically, emerging innovations and technologies, trends, and opportunities Coordinate with commercial and international partners to identify areas of mutual interest and cooperation Support future mission and system architecture studies for human exploration This document is intended to be a comprehensive overview of the strategic development plans, or Roadmaps, of key technologies and capabilities identified by the SCLT. Each Roadmap is organized by Capability Gap as the gap name and number appears in STARPort, follows a fiscal year timeline, and displays any additional information on milestones, decision points, or important details on the right-hand side of the page. The Roadmaps should be used to facilitate discussion, decision making, and planning for programs and development projects, but are not expected to accurately depict the details and statuses of the projects and tasks appearing within the plans.

Human Health and Performance↗
NASA NTRS2023

Wildfire Adaptation in the Russian Arctic: A Systematic Policy Review

A scientific consensus acknowledges that climate change has increased wildfire activity in the Russian Arctic, a trend projected to continue in response to further warming. Regional governments across Russia have started to design and develop adaptation policies and plans (i.e. outputs) to this end. Our comprehensive understanding on the state of wildfire adaptation in policy is limited. In this article we systematically review policies and plans developed to adapt to wildfires in the Russian Arctic. Using systematic approaches, we identify 12 wildfire adaptation outputs adopted between 2008 and 2020. Our findings indicate that wildfire adaptation outputs are aimed at reducing the risk of wildfires and improve wildland fire response, implemented through legislative and regulatory mechanisms, developed at the regional level, adopted in response to national mandates, and mainstreamed into existing forest management policies. Although there is evidence of wildfire adaptation planning occurring in the Russian Arctic, we find that the nature and extent of wildfire adaptation outputs are not sufficient to address the seriousness and severity of climate change, with key shortcomings found in relation to the scientific, human, and management characteristics. We argue that expanding the profile of climate change research in the Russian Arctic and improving the dialogue among researchers, local and Indigenous peoples, and decision-makers are critical for providing useful recommendations for policy makers to accelerate wildfire adaptation in the Russian Arctic.

Wildfire↗
NASA NTRS1992

Design and analysis issues of integrated control systems for high-speed civil transports

A study was conducted to identify, rank, and define development plans for the critical guidance and control design and analysis issues as related to economically viable and environmentally acceptable high-speed civil transport. The issues were identified in a multistep process. First, pertinent literature on supersonic cruise aircraft was reviewed, and experts were consulted to establish the fundamental characteristics and problems inherent to supersonic cruise aircraft. Next, the advanced technologies and strategies being pursued for the high-speed civil transport were considered to determine any additional unique control problems the transport may have. Finally, existing technologies and methods were examined to determine their capabilities for the design and analysis of high-speed civil transport control systems and to identify the shortcomings and issues. Three priority levels - mandatory, highly beneficial, and desirable - were established. Within each of these levels, the issues were further ranked. Technology development plans for each issue were defined. Each plan contains a task breakdown and schedule.

Mccarty, Craig A.↗
NASA NTRS1987

Design techniques for developing a computerized instrumentation test plan

The development of a computerized instrumentation test plan (ITP) for the NASA/Ames Research Center National Full Scale Aerodynamics Complex (NFAC) is discussed. The objective of the ITP program was to aid the instrumentation engineer in documenting the configuration and calibration of data acquisition systems for a given test at any of four low speed wind tunnel facilities (Outdoor Aerodynamic Research Facility, 7 x 10, 40 x 80, and 80 x 120) at the NFAC. It is noted that automation of the ITP has decreased errors, engineering hours, and setup time while adding a higher level of consistency and traceability.

Burnett, S. Kay↗
NASA NTRS1974

Development and planning and design of equipment pumping generator of semiconductor lasers

The schematic of a multidimensional current pulse generator is studied. A MTKh-90 cold cathode thyratron is used as the current commutator. In the autooscillation mode on a frequency of 380 hertz the generator creates a current to 100 amps per pulse in a control resistance of 1 ohm. The pulse duration is regulated within the limits from 0.1 to 3.0 microseconds.

Popkov, A. V.↗
NASA NTRS1978

Satellite Power Systems (SPS) concept definition study (exhibit C)

A coplanar satellite conceptual approach was defined. This effort included several trade studies related to satellite design and also construction approaches for this satellite. A transportation system, consistent with this concept, was also studied, including an electric orbit transfer vehicle and a parallel-burn heavy lift launch vehicle. Work on a solid state microwave concept continued and several alternative approaches were evaluated. Computer determination of an optimized transistor and circuit design was also continued. Experiment/verification planning resulted in the development of a total solar array and microwave technology development plan, as well as definition of near-term research to evaluate key technology issues.

Hanley, G. M.↗
NASA NTRS1989

Integrated multidisciplinary optimization of rotorcraft: A plan for development

This paper describes a joint NASA/Army initiative at the Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for important interactions among the disciplines. The paper describes the optimization formulation in terms of the objective function, design variables, and constraints. Additionally, some of the analysis aspects are discussed, validation strategies are described, and an initial attempt at defining the interdisciplinary couplings is summarized. At this writing, significant progress has been made, principally in the areas of single discipline optimization. Accomplishments are described in areas of rotor aerodynamic performance optimization for minimum hover horsepower, rotor dynamic optimization for vibration reduction, and rotor structural optimization for minimum weight.

Adelman, Howard M.↗
NASA NTRS1992

Develop research plan for use of atlas data

This contract study is devoted to performing atmospheric photochemical modeling research in conjunction with the ATLAS missions. The purpose of the work was to provide scientific understanding of the stratospheric chemical measurements performed by the suite of ATLAS instruments. Photochemical model studies of the stratosphere were performed. SAGE and Dobson Umkehr ozone measurements were studied.

Newchurch, Michael↗
NASA NTRS2001

Improving System Engineering Excellence at NASA's Marshall Space Flight Center

NASA's Marshall Space Flight Center (MSFC) management feels that sound system engineering practices are essential for successful project management, NASA studies have concluded that recent project failures could be attributed in part to inadequate systems engineering. A recent survey of MSFC project managers and system engineers' resulted in the recognition of a need for training in Systems Engineering Practices, particularly as they relate to MSFC projects. In response to this survey, an internal pilot short-course was developed to reinforce accepted practices for system engineering at MSFC. The desire of the MSFC management is to begin with in-house training and offer additional educational opportunities to reinforce sound system engineering principles to the more than 800 professionals who are involved with system engineering and project management. A Systems Engineering Development Plan (SEDP) has been developed to address the longer-term systems engineering development needs of MSFC. This paper describes the survey conducted and the training course that was developed in response to that survey.

Takada, Pamela Wallace↗
NASA NTRS2001

Outline Of A Twenty-Five Year Plan For Development And Deployment Of a Catapult For a Third Generation Space Shuttle

This report reviews the rationale for catapult assist in the launching of a third generation space shuttle. It then furnishes lists of early design decisions, questions whose answers are prerequisite to later design decisions, preliminary inventories of carriage levitation and carriage propulsion concepts, phases of the project and major milestones, and some sources of expertise to support the project.

Russell, John M.↗
NASA NTRS2002

Outline of a Twenty-Five Year Plan for Development and Deployment of A Catapult for A Third Generation Space Shuttle

This report reviews the rationale for catapult assist in the launching a third generation space shuttle. It then furnishes lists of early design decisions, questions whose answers are prerequisite to later design decisions, preliminary inventories of carriage levitation and carriage propulsion concepts, phases of the project and major milestones, and some sources of expertise to support the project.

Russell, John M.↗
NASA NTRS2018

NASA’s Plans for Development of Standards for Additive Manufactured Components

There are currently no NASA standards providing specific design and construction requirements for certification of additively manufactured parts. Several international standards organizations are developing standards for additive manufacturing; however, NASA mission schedules preclude the Agency from relying on these organizations to develop standards that are both timely and applicable. NASA and its program partners in manned spaceflight (the Commercial Crew Program, the Space Launch System and the Orion Multi-purpose Crew Vehicle) are actively developing additively manufactured parts for flight as early as 2018. To bridge this gap, NASA Marshall Space Flight Center (MSFC) has authored a center-level standard (MSFC-STD-3716)1 to establish standard practices for the Laser Powder Bed Fusion (L-PBF) process. In its draft form, the MSFC standard has been used as a basis for L-PBF process implementation for each of the manned space flight programs. The development of an Agency-level standard is proposed, which based upon the principles of MSFC-STD-3716, would have application to multiple additive manufacturing processes and be readily adaptable to all NASA programs.

Russell, Richard W.↗
NASA NTRS2019

Nasa's Plans for Development of a Standard for Additively Manufactured Components

The current version of NASA standards for manned spaceflight hardware do not contain sufficient detail for the certification of additively manufactured components. The development of additively manufactured standards is currently in work by several standards organizations. However, NASA cannot wait on these organizations to develop such standards. NASA and its program partners in manned spaceflight (Commercial Crew, Space Launch System and the Orion Multi-Purpose Crew Vehicle) are actively developing additively manufactured components for flight as early as 2019.

Russell, Richard W.↗