Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

The relationships between residual stress relaxation and texture development in AZ31 Mg alloys via the vibratory stress relief technique

A systematic study of residual stress relaxation and the texture evolution of cold-rolled AZ31 Mg alloys using the vibratory stress relief technique with a simple cantilever beam vibration system was performed using a high-resolution X-ray diffractometer and a portable X-ray residual stress analyzer. The effects of vibrational stress excitation on the surface residual stress distribution and on the texture of pole figures (0002) occurring during the vibratory stress relief were examined. Compared with the effects corresponding to the same alloy under non-vibration condition, it can be observed that the uniform surface residual stress distribution and relaxation of the compressive residual stress in the stress concentration zone were observed rather than all of the residual stresses being eliminated. Furthermore, with an increase in the vibrational aging time, the compressive residual stress, texture density, and (0002) preferred orientation increased first and then decreased. It should be underlined that the vibratory stress relief process for the vibrational aging time of more than 10 min is able to weaken the strong basal textures of AZ31 Mg alloys, which is valuable for enhancement of their formability and is responsible for an almost perfect 3D-Debye–Scherrer ring. - Highlights: • 3D-Debye ring about VSR technique is not discussed in the existing literature. • A newly developed VSR method is suitable for small or thin workpieces. • The cosα method accurately and effectively determines the residual stresses. • The VSR technique is valuable for enhancement of their formability. • The texture and preferred orientation change with the vibrational aging time.

36 MATERIALS SCIENCE↗

Microstructural evolution of nanocrystalline Fe–Zr alloys upon annealing treatment

Nanocrystalline Fe–Zr alloys exhibit an extraordinary thermal stability at elevated temperatures, which enables their potential applications in various fields. However, there remain concerns regarding the controlling stabilization mechanisms responsible for their thermal stability. In this work, two nanocrystalline Fe–Zr alloys containing 1 at.% Zr and 5 at.% Zr were annealed at various temperatures (T{sub ann}) up to 900 °C. Microstructural evolution of the alloys upon annealing was investigated by means of an X-ray diffractometer equipped with a 2-dimensional detector and transmission electron microscopy. Below 600 °C, microstructures of the two alloys consist of single nanocrystalline ferrite whose grain size is rather stable upon annealing treatments. Above 600 °C, accompanying the precipitation of Fe{sub 3}Zr phase, an apparent grain coarsening of ferrite is observed, whereas the thermal stability of the alloys is still considerably higher than that of nanocrystalline pure Fe. Based on the experimental results, it was claimed that stabilization of the nanocrystalline Fe–Zr alloys should not be totally ascribed to the thermodynamic stabilization mechanism due to the reduction in grain boundary energy as suggested in earlier investigations [K.A. Darling et al., Scr. Mater. 59 (2008) 530 and K.A. Darling et al., Mater. Sci. Eng. A527 (2010) 3572]; when T{sub ann} is higher than 600 °C, along with the precipitation of Fe{sub 3}Zr, the effect of thermodynamic stabilization is weakened, the kinetic effect arising from Zener pinning of Fe{sub 3}Zr precipitates turns to be an important mechanism contributing to the stabilization of the nanoscale grain size. - Highlights: • We show clear evidence of precipitation of Fe{sub 3}Zr phase above 600 °C. • Stabilization of nanostructure is not solely controlled by thermodynamic mechanism. • Above 600 °C, Zener pinning plays an important role in stabilizing nanostructure.

36 MATERIALS SCIENCE↗

Crystallization kinetics of Mg–Cu–Yb–Ca–Ag metallic glasses

The paper presents research into a Mg–Cu–Yb system based metallic glassy alloys. Metallic glasses were prepared using induction melting and further injection on a spinning copper wheel. The effect of alloying by Ag and Ca on the glass forming ability and the kinetics of crystallization of Mg–Cu–Yb system based alloys were studied. The differential scanning calorimeter and X-ray diffractometer were used to investigate the kinetics of crystallization and the phase composition of the samples. An indicator of glass forming ability, effective activation energy of crystallization, and enthalpy of mixing were calculated. An increase of the Ca and Ag content has a positive effect on the glass forming ability, the effective activation energy of crystallization, and the enthalpy of mixing. The highest indicators of the glass forming ability and the thermal stability were found for alloys that contain both alloying elements. The Ag addition suppresses precipitation of the Mg{sub 2}Cu phase during crystallization. A dual-phase glassy-nanocrystalline Mg structure was obtained in Mg{sub 65}Cu{sub 25}Yb{sub 10} and Mg{sub 59.5}Cu{sub 22.9}Yb{sub 11}Ag{sub 6.6} alloys after annealing. Bulk samples with a composite glassy-crystalline structure were obtained in Mg{sub 59.5}Cu{sub 22.9}Yb{sub 11}Ag{sub 6.6} and Mg{sub 64}Cu{sub 21}Yb{sub 9.5}Ag{sub 5.5} alloys. A thermodynamic database for the Mg–Cu–Yb–Ca–Ag system was created to compare the process of crystallization of alloys with polythermal sections of the Mg–Cu–Yb–Ca–Ag phase diagram. - Highlights: • New alloy compositions based on Mg–Cu–Yb system were developed and investigated. • Increasing content of Ag and Ca leads to improving GFA. • Bulk samples with a composite glassy-crystalline structure were obtained. • Thermodynamic database for Mg–Cu–Yb–Ca–Ag system was created.

36 MATERIALS SCIENCE↗

Growth and magnetoelectric properties of (00l)-oriented La{sub 0.67}Sr{sub 0.33}MnO{sub 3}/PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} heterostructure films

C-axis oriented La{sub 0.67}Sr{sub 0.33}MnO{sub 3}(LSMO)/PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}(PZT) films are fabricated successfully by sol-gel method on LaAlO{sub 3} (00l) substrates. The structure, composition and morphology of the films are investigated by X-ray diffractometer (XRD, θ-2θ scan, ω-scan and ϕ-scan), X-ray photoelectron spectroscope (XPS), field emission scanning electron microscope (FESEM) and high resolution transmission electron microscope (HRTEM). The electric and magnetic properties of randomly and c-axis oriented LSMO/PZT films are studied comparably using ferroelectric testing apparatus and physical property measurement system (PPMS). It is found that the epitaxial LSMO/PZT composite films show well controlled growth along c-axis, and much better magnetoelectric properties than the randomly oriented ones. The ME voltage coefficient increases from 23 mV cm{sup −1} Oe{sup −1} for the randomly oriented LSMO/PZT composite films to 52 mV cm{sup −1} Oe{sup −1} for c-axis oriented ones prepared using the low cost sol-gel method presented in this study, which shows high potential in promising applications. - Highlights: •Epitaxial LSMO/PZT films were fabricated successfully by sol-gel method on LAO (00l) substrate. •The prepared films exhibit well-defined multiferroic properties for the epitaxial LSMO/PZT films. •Epitaxial LSMO/PZT films show superior magnetoelectric properties to the randomly oriented ones.

36 MATERIALS SCIENCE↗

Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles

Highlights: • Zn has a negligible influence on the final recrystallization microstructure and texture of Al-Mg-Si-Cu alloys. • By adding Fe-rich phase particles to refine the recrystallization grain sizes could control the texture. • The deep drawability of Al-Mg-Si-Cu alloys could be affected by solute Zn atom besides the microstructure and texture. - Abstract: The effect of Zn on the microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles was investigated using tensile testing machine, optical microscopy (OM), scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffractometer (XRD) in the present study. The results show that Zn addition has a significant influence on the final mechanical properties, but a slight effect on microstructure and final recrystallization texture. Zn addition is favorable to increase yield strength, ultimate tensile strength and elongation, however it is detrimental to improve r value and reduce Δr value. During the thermomechanical processing, the microstructure almost has nothing to do with Zn addition. However, Zn could prevent the secondary phase particles from precipitating during intermediate annealing. In contrast to the alloy sheet without Zn, the alloy sheet with 1.0 wt% Zn always has weaker textures before final cold rolling, but a stronger texture after experiencing final cold rolling. After solution treatment, they almost possess the same recrystallization texture. Finally, the effect of Zn addition on the recrystallization texture was discussed. Their similar recrystallization texture can be attributed to the similar microstructure, which was caused by the medium number of Fe-rich phase particles.

36 MATERIALS SCIENCE↗

Microstructure detection of Mg-Zi-Ti-Si amorphous composite coating prepared by SMAT

Highlights: • The Mg-Zn-Ti-Si amorphous composite coating was prepared on Mg alloy via SMAT. • Except for amorphous portion, the phases of coating include Zn, Mg{sub 7}Zn{sub 3}, and Si. • The coating was thick and rough but it was well combined with the matrix. • During SMAT, the matrix surface was also strengthened because of solid-solution and grain refinement. - Abstract: The Mg-Zn-Ti-Si coating was prepared on Mg alloy through surface mechanical attrition treatment (SMAT) which was simple and low-cost. The microstructure and phase composition of coating were detected through a scanning electron microscope (SEM), an X-ray diffractometer (XRD) and a high resolution transmission electron microscope (HRTEM). The results demonstrated that the layer thickness, which depended on the rotation speed, was 20–80 μm. Although the coating was rough, it was well combined with the matrix. The XRD pattern and HRTEM image analysis demonstrated that the coating contained both amorphous and crystalline phases (Zn, Mg{sub 7}Zn{sub 3} and Si). The process also led to matrix surface strengthening; the mechanisms are solid solution and grain refinement.

36 MATERIALS SCIENCE↗

Nanocrystallization kinetics of amorphous Fe{sub 81}B{sub 13.5}Si{sub 3.5}C{sub 2} magnetic ribbons

The kinetics of the nanocrystallization of amorphous Fe{sub 81}B{sub 13.5}Si{sub 3.5}C{sub 2} ribbon is studied. The changes in the microstructures and magnetic properties of ribbons annealed at 425 and 495 deg. C for 0.5-10 h were investigated using an X-ray diffractometer (XRD), Moessbauer spectroscopy (MS), differential scanning calorimeter (DSC) and vibrating sample magnetometer (VSM). The changes in the surface morphology were observed by a changed atomic force microscope (AFM). The XRD patterns and the Moessbauer spectrums show the formation of nanocrystallites of {alpha}-Fe(Si), Fe-B, Fe{sub 3}C and Fe{sub 3}Si of different grain sizes when annealed at different temperatures. The nanocrystallization kinetics of the Fe{sub 81}B{sub 13.5}Si{sub 3.5}C{sub 2} ribbon are described by an Avrami growth curve with an exponent values of 1.34 and 1.01 for the isothermal annealing at 425 and 495 deg. C, respectively. AFM topography pictures and surface image show that the density of the microstructure and the size of the grain increase as higher annealing temperatures are used.

36 MATERIALS SCIENCE↗

Optical, structural and microhardness properties of KDP crystals grown from urea-doped solutions

Potassium dihydrophosphate single crystals were grown from aqueous solutions onto a point seed using temperature reduction method by doping with different molar values of urea. The characterization of the grown crystals was made by visible and Fourier transform infrared spectroscopy, Vicker's hardness studies, X-ray powder diffraction, non-linear optical and laser damage threshold measurements. By comparing these crystals with the ones grown from the pure solution, it is shown that 0.2-2.0 M of the urea additive enhances the laser damage threshold and the second harmonic efficiency more than by 25 and 20%, respectively. By means of the Bond method using a multipurpose three-crystal X-ray diffractometer it is shown that the presence of urea additive increases the crystal lattice parameter c of the grown crystals, whereas the lattice parameter a is by an order less sensitive to the changing urea concentration in the solution. The Vicker's hardness studies at room temperature carried out on (1 0 0) and (0 0 1) crystallographic planes show an increased hardness of the doped crystals (grown in the presence of urea additive) on the plane (0 0 1) in comparison with that of pure potassium dihydrophosphate crystal.

36 MATERIALS SCIENCE↗

Thermal expansion studies of Gd{sub 2}Mo{sub 3}O{sub 12} and Gd{sub 2}W{sub 3}O{sub 12}

Simultaneous thermogravimetric/differential thermal analysis of Gd{sub 2}Mo{sub 3}O{sub 12} showed an irreversible phase transition at 1178 K where as Gd{sub 2}W{sub 3}O{sub 12} showed reversible phase transition at 1433 K, which were confirmed by powder X-ray diffraction. The thermal expansion behavior of {alpha}-Gd{sub 2}Mo{sub 3}O{sub 12} (room temperature phase), {beta}-Gd{sub 2}Mo{sub 3}O{sub 12} (phase obtained by heating Gd{sub 2}Mo{sub 3}O{sub 12} at 1223 K) and Gd{sub 2}W{sub 3}O{sub 12} have been investigated using high temperature X-ray diffractometer. The cell volume of {alpha}-Gd{sub 2}Mo{sub 3}O{sub 12}, {beta}-Gd{sub 2}Mo{sub 3}O{sub 12} and Gd{sub 2}W{sub 3}O{sub 12}, fit into polynomial expression with respect to temperature, showed positive thermal expansion up to 1073, 1173 and 1173 K, respectively. The average volume expansion coefficients for {alpha}-Gd{sub 2}Mo{sub 3}O{sub 12}, {beta}-Gd{sub 2}Mo{sub 3}O{sub 12} and Gd{sub 2}W{sub 3}O{sub 12} are 39.52 x 10{sup -6}, 21.23 x 10{sup -6} and 37.96 x 10{sup -6} K{sup -1}, respectively.

36 MATERIALS SCIENCE↗

Controllable synthesis of self-assembled Cu{sub 2}S nanostructures through a template-free polyol process for the degradation of organic pollutant under visible light

Cu{sub 2}S nanostructures were fabricated by polyol method and then characterized by X-ray diffractometer, scanning electron microscopy, transmission electron microscopy (TEM) and high resolution TEM. The morphologically different Cu{sub 2}S nanostructures such as vertically nanorod arrays, nanoflowers assembled by nanorod arrays, nanoparticles and nanowires, can be successfully synthesized under different experimental conditions. The growth mechanism for the different nanostructures is proposed. The photocatalytic activity of the prepared samples was evaluated based on the degradation of organic pollutant, active brilliant red X-3B (X-3B), under visible light. Among the Cu{sub 2}S nanostructures, self-assembled nanoflowers have the highest photocatalytic activity. In addition, the prepared Cu{sub 2}S nanostructures are found to be able to decolorize X-3B with iron ions for the formation of Fenton reagent. This study provides a more choice to prepare self-assembled nanostructures for the application of environmental pollution control.

36 MATERIALS SCIENCE↗

Synthesis, characterization and properties of carbon nanotubes microspheres from pyrolysis of polypropylene and maleated polypropylene

Microspheres assembled from carbon nanotubes (MCNTs), with the diameters ranging from 5.5 to 7.5 {mu}m, were synthesized by means of pyrolysis of polypropylene and maleated polypropylene in an autoclave. The characterization of structure and morphology was carried out by X-ray diffractometer (XRD), field-emission scanning electron microscopy (FESEM), (high resolution) transmission electron microscope [(HR)TEM)], selected-area electron diffraction (SAED) and Raman spectrum. As a typical morphology, the possible growth process of MCNTs was also investigated and discussed. The results of nitrogen adsorption-desorption indicate that the Brunauer-Emett-Teller (BET) surface area (140.6 m{sup 2}/g) of the MCNTs obtained at 600 {sup o}C is about twice as that (74.5 m{sup 2}/g) of carbon nanotubes obtained at 700 {sup o}C. The results of catalytic experiment show that MCNTs based catalyst has higher catalytic activity than the carbon nanotubes based catalyst for the preparation of methanol and dimethoxy-ethane by oxidation of dimethyl ether.

36 MATERIALS SCIENCE↗

Fine particle Sr{sub 2}SiO{sub 4}:Tb phosphor for the plasma display panel prepared by a combined approach

Sol-gel with microwave heating was employed to prepare fine particles Sr{sub 2}SiO{sub 4}:Tb phosphor. X-ray diffractometer was used to characterize the structural of the samples. The Scanning Electron Microscope image shows that the particle size is about 300 nm. The phosphor particles have several advantages in the morphology, such as excellent surface quality, spherical shape, and narrow size distribution with no aggregation. The VUV luminescence measurements indicate that the phosphor presents an intense excitation band at 173 nm. Because the wavelength of excitation source in PDP is mainly at 147 and 172 nm, it makes Sr{sub 2}SiO{sub 4}:Tb a potential candidate for green emitting phosphor for plasma display panel (PDP) application. Photoluminescence (PL) measurements indicate that the Sr{sub 2}SiO{sub 4}:Tb particles present excellent green emission at 542 and 547 nm excitated at 236 and 172 nm, respectively.

36 MATERIALS SCIENCE↗

Structural, morphological, and electrical characteristics of the electrodeposited cobalt oxide electrode for supercapacitor applications

Cobalt oxide (Co{sub 3}O{sub 4}) thin films were prepared through electrodeposition on copper substrates using an ammonia-complexed cobalt chloride solution. The structural and morphological properties of the film were studied using an X-ray diffractometer and scanning electron microscopy, and the results showed that the electrodeposited cobalt oxide film had a nanocrystalline and porous structure. The electrochemical behavior of the electrodeposited cobalt oxide electrode was evaluated in a KOH solution using cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge-discharge tests. The electrodeposited cobalt oxide electrode exhibited a specific capacitance of 235 F/g at a scan rate of 20 mV/s. The specific energy and the specific power of the electrode were 4.0 Wh/kg and 1.33 kW/kg, respectively.

36 MATERIALS SCIENCE↗

CuBi{sub 2}O{sub 4} single crystal nanorods prepared by hydrothermal method: Growth mechanism and optical properties

Highlights: {yields} CuBi{sub 2}O{sub 4} nanorods with single crystal structure by hydrothermal method are firstly synthesized. {yields} They are evolved from particles with oriented attachment-dissolution-splitting process. {yields} The optical properties of the samples are explored. -- Abstract: The synthesis of copper bismuth oxide (CuBi{sub 2}O{sub 4}) nanorods with single crystal structure by hydrothermal method is first reported here. The prepared CuBi{sub 2}O{sub 4} nanorods are characterized by X-ray diffractometer, scanning electron microscopy, transmission electron microscopy (TEM) and high resolution TEM. It is found that the concentration of reagent cupric acetate has strong effect on the purity and microstructure of the prepared samples. The growth process is investigated in detail. It is proposed that the nanorods are evolved from spherical particles with oriented attachment mechanism followed by dissolution-splitting process. The optical properties of the samples are detected by UV-vis spectrometer and photoluminescence spectrometer and exhibit strong dependence on surface defect states and microstructure feature, which is mainly determined by preparation conditions.

36 MATERIALS SCIENCE↗

Synthesis of Pt/PEI-MWCNT composite materials on polyethyleneimine-functionalized MWNTs as supports

Graphical abstract: Schematic diagram for (a) the preparation of Pt/MWCNT functionalized with PEI and (b) TEM of Pt/PEI-MWCNT. Highlights: Black-Right-Pointing-Pointer We prepared Pt/PEI/MWCNT where MWCNT was first functionalized by PEI (polyethyleneimine) followed by Pt deposit onto it. Black-Right-Pointing-Pointer PEI functionalization provided high density homogeneous functional groups on MWCNT's sidewall. Black-Right-Pointing-Pointer Cationic PEI leads to homogeneous dispersion in solutions such as water and organic solvents. Black-Right-Pointing-Pointer Pt/PEI/MWCNT catalyst exhibits excellent electrocatalytic activity compared to that of Pt/MWCNT catalyst obtained with polyvinylpyrrolidine (PVP). -- Abstract: Composite materials with highly dispersed platinum (Pt) nanoparticles on multiwalled carbon nanotubes (MWCNTs), functionalized with polyethyleneimine (PEI) by a noncovalent method were prepared. The PEI-functionalization provided high density homogeneous functional groups on the MWCNTs' sidewalls for binding Pt nanoparticles. Cationic PEI leads to homogeneous dispersion in solutions such as water and organic solvents. The effects of a reducing agent on the Pt nanoparticles that form on the surfaces of the MWCNT were studied by varying the molar ratio of NaOH to H{sub 2}PtCl{sub 6}. These composite materials were characterized with transmission electron micrograph (TEM), X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS). The Pt/PEI-MWCNT catalyst exhibits excellent electrocatalytic activity and compared with Pt/PVP-MWCNT catalysts obtained with polyvinylpyrrolidone (PVP). Finally, the cyclic voltammogram of methanol electrooxidation for Pt/PEI-MWCNT shows better tolerance to CO and methanol oxidation to CO{sub 2} than of Pt/PVP-MWCNT.

36 MATERIALS SCIENCE↗

Preparation of magnetic photocatalyst nanoparticles—TiO{sub 2}/SiO{sub 2}/Mn–Zn ferrite—and its photocatalytic activity influenced by silica interlayer

Highlights: ► TiO{sub 2}/SiO{sub 2}/Mn–Zn ferrite acts as magnetic photocatalyst nanoparticle. ► SiO{sub 2} interlayer is used to prevent electron migration between photocatalyst and magnetic core. ► TiO{sub 2}/Mn–Zn ferrite without SiO{sub 2} interlayer shows poor magnetic and photocatalytic property. -- Abstract: A magnetic photocatalyst, TiO{sub 2}/SiO{sub 2}/Mn–Zn ferrite, was prepared by stepwise synthesis involving the co-precipitation of Mn–Zn ferrite as a magnetic core, followed by a coating of silica as the interlayer, and titania as the top layer. The particle size and distribution of magnetic nanoparticles were found to depend on the addition rate of reagent and dispersing rate of reaction. The X-ray diffractometer and transmission electron microscope were used to examine the crystal structures and the morphologies of the prepared composites. Vibrating sample magnetometer was also used to reveal their superparamagnetic property. The UV–Vis spectrophotometer was employed to monitor the decomposition of methylene blue in the photocatalytic efficient study. It was found that at least a minimum thickness of the silica interlayer around 20 nm was necessary for the inhibition of electron transference initiated by TiO{sub 2} and Mn–Zn ferrite.

36 MATERIALS SCIENCE↗

Investigation on growth, structural, optical, thermal, dielectric and mechanical properties of organic L-prolinium trichloroacetate single crystals

Graphical abstract: L-Prolinium trichloroacetate is an organic nonlinear optical crystal has been grown from the aqueous solution by slow evaporation solution growth technique. Single crystal X-ray diffraction analysis reveals that L-PTCA crystallizes in trigonal crystal system. The optical band gab is found to be 4.26 eV. Second harmonic conversion efficiency of L-PTCA has been found to be half that of KDP. Highlights: ► It deals with the synthesis, growth and characterization of L-PTCA an organic NLO crystal. ► Wide optical transparency window between 260 nm and 1100 nm. ► Thermal study reveals that the grown crystal is stable up to 127 °C. ► L-PTCA crystal exhibits the second order nonlinear optical properties. -- Abstract: A new organic nonlinear optical material L-prolinium trichloroacetate (L-PTCA) single crystal has been synthesized and grown by slow solvent evaporation technique at room temperature using water as solvent. Single-crystal X-ray diffractometer was utilized to measure unit cell parameters and to confirm lattice parameter. The powder X-ray diffraction pattern of the grown L-PTCA has been indexed. The modes of vibration of different molecular groups present in the sample were identified by the FTIR spectral analysis. The optical transmittance window and the lower cutoff wavelength of the L-PTCA have been identified by UV–vis–NIR studies. Thermal stability of the L-prolinium trichloroacetate was determined by TGA/DTA measurements. Dielectric measurements were carried out at various temperatures at frequency range 10–1 MHz. The mechanical properties of the grown crystals have been analyzed by Vickers microhardness method. The chemical etching studies were carried out on the grown crystals. Its SHG efficiency has been tested by Kurtz powder method.

36 MATERIALS SCIENCE↗

Synthesis of fibrous reticulate nanocrystalline n-type MoBi{sub 2}(Se{sub 1−x}Te{sub x}){sub 5} thin films: Thermocooling applications

Graphical abstract: Ostwald ripening: If small nucleus is close to a larger crystal, ions formed by particle dissolution of smaller crystal incorporated into larger crystal, and film formation takes place by ion by ion condensation. Display Omitted Highlights: ► Arrested Precipitation Technique is applied to deposit MoBi{sub 2}(Se{sub 1−x}Te{sub x}){sub 5}. ► X-ray diffraction confirms the proper phase formation of material. ► MoBi{sub 2}(Se{sub 1−x}Te{sub x}){sub 5} exhibits an n-type semiconducting behavior. ► Good thermoelectric performance suggests future fantasy. -- Abstract: In the present investigation n-type MoBi{sub 2}(Se{sub 1−x}Te{sub x}){sub 5} nanocrystalline thin films with various compositions of Se and Te were successfully deposited on ultrasonically cleaned glass substrates using recently developed Arrested Precipitation Technique (APT). The effect of composition on optical, morphological, structural, electrical and thermocooling properties of MoBi{sub 2}(Se{sub 1−x}Te{sub x}){sub 5} were investigated using UV–vis–NIR Spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffractometer, thermoelectric power and thermocooling measurements. Thermoelectric properties including electrical conductivity (σ), Seeback coefficient (S) and figure of merit (ZT) were measured at 300 K. Our aim is to investigate thermocooling behavior in respect of variation in composition of Se and Te in MoBi{sub 2}(Se{sub 1−x}Te{sub x}){sub 5} thin films along with optostructural and optoelectric properties.

36 MATERIALS SCIENCE↗