Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC FIELD STRENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electronic and structural properties of RbCe X 2 ( X 2 : O 2 , S 2 , SeS, Se 2 , TeSe, Te 2 )

We report triangular lattice delafossite compounds built from magnetic lanthanide ions are a topic of recent interest due to their frustrated magnetism and realization of quantum disordered magnetic ground states. Here we report the evolution of the structure and electronic ground states of RbCeX 2 compounds, built from a triangular lattice of Ce 3+ ions, upon varying their anion character (X 2 =O 2 , S 2 , SeS, Se 2 , TeSe, Te 2 ). This includes the discovery of a new member of this series, RbCeO 2 , that potentially realizes a quantum disordered ground state analogous to NaYbO 2 . Magnetization and susceptibility measurements reveal that all compounds manifest mean-field antiferromagnetic interactions and, with the exception of the oxide, possess signatures of magnetic correlations onset below 1 K. The crystalline electric field level scheme is explored via neutron scattering and ab initio calculations in order to model the intramultiplet splitting of the J=5/2 multiplet. In addition to the two excited doublets expected within the J=5/2 manifold, we observe one extra local mode present across the sample series. This added mode shifts downward in energy with increasing anion mass and decreasing crystal field strength, suggesting a long-lived anomalous mode endemic to anion motion about the Ce3 + sites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Modeling and Measuring the Stress Distribution in Soft Magnetic Cores due to Epoxy Impregnation and Curing

Understanding the effects of viscoelastic relaxation of stresses is critical in electric motor and inductor applications, where the magnetic material is fully or partially comprised of an amorphous phase and impregnated in an epoxy. Magnetic Amorphous Nanocomposites (MANCs) are a class of recently developed high-frequency magnetic materials that exhibit low magnetic hysteresis, high saturation flux density and very low AC magnetic losses. MANCs are formed as long, thin ribbons, a shape factor that minimizes eddy current-induced self-heating. This feature, in addition to their 1 GPa strength, and makes them attractive candidates for high-speed, high-power density, electric motors. MANCs are used in the form of tape-wound cores (TWCs). During the manufacturing process, the cores are impregnated with liquid epoxy between each layer of ribbon. Validated knowledge of the stresses imposed by the manufacturing process and during operation is necessary to understand motor performance limitations with respect to strength. Magnetostriction, the strain imposed by reversal of the magnetic field, also affects performance. When the epoxy cures, it contracts volumetrically by 8%, imposing radial and circumferential stresses that vary along the radial direction. To date, these stresses have received little attention in the literature. Here, we model the stress distribution throughout a TWC due to epoxy curing. Strain gauge measurements reported here indicate substantially lower tangential strain than model values, which is beneficial and which we attribute to viscoelastic relaxation of the epoxy layers. We will incorporate a constitutive model of this viscoelastic relaxation, and conduct more detailed strain measurements to understand how this takes

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

An Alfvenic reconnecting plasmoid thruster

A new concept for the generation of thrust for space propulsion is introduced. Energetic thrust is generated in the form of plasmoids (confined plasma in closed magnetic loops) when magnetic helicity (linked magnetic field lines) is injected into an annular channel. Using a novel configuration of static electric and magnetic fields, the concept utilizes a current-sheet instability to spontaneously and continuously create plasmoids via magnetic reconnection. Here, the generated low-temperature plasma is simulated in a global annular geometry using the extended magnetohydrodynamic model. Because the system-size plasmoid is an Alfvenic outflow from the reconnection site, its thrust is proportional to the square of the magnetic field strength and does not ideally depend on the mass of the ion species of the plasma. Exhaust velocities in the range of 20 to $500\ \textrm {km}\ \textrm {s}^{-1}$ , controllable by the coil currents, are observed in the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Microstructural Characteristics, Mechanical Properties, and Corrosion Behavior of Field-Assisted Diffusion Welded Alloy 617

This study investigated the microstructural characteristics, mechanical response, and corrosion resistance of Alloy 617 diffusion welded by electric field-assisted sintering (EFAS). The microstructure exhibited good grain boundary (GB) migration across the interface and flat interface in the samples bonded at different conditions. Graded grain size was observed, with grain coarsening being more significant near sample surface due to EFAS-induced temperature gradient. Tensile testing revealed that the specimens fractured in the matrix away from the interface. The peak strength of 807 MPa was obtained in the samples welded at 1000°C. The materials obtained at 1100°C exhibited reduced tensile strength but improved ductility. Strain maps revealed by digital image correlation showed the flat interfaces were less ductile compared to the matrix. The hardness reduced near sample surfaces due to enlarged grains induced by temperature gradient. The interfaces with GB migration exhibited improved corrosion resistance in molten salt compared to the flat interfaces.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Off-state magnetoresistance in long-channel germanium Schottky-barrier MOSFETs

An increasing magnetic field perpendicular to an undoped semiconductor surface at low temperature is known to strengthen the binding of localized electrons to stationary ions, as the wavefunction's tails evolve from exponential to Gaussian. It is also known that application of a high bias voltage to a depleted semiconductor can liberate bound charge and induce a large drop in electrical resistance. We connect these established results to experimental electrical transport measurements on off-state germanium Schottky-barrier metal–oxide–semiconductor field-effect transistor (MOSFETs) with an aluminum oxide insulating dielectric and platinum germanide contacts. We make measurements at the three distinct orientations of the magnetic field with respect to the substrate and the current. At 6 K, we observe sharp attenuation of current by more than 2 orders of magnitude, within 60 mT, at a crossover magnetic field perpendicular to the substrate. A 1 T magnetic field attenuates the current by more than 4 orders of magnitude. The strength of the attenuation and the value of the crossover field are controlled by both the gate–source and drain–source voltages. The attenuation is much weaker when the magnetic field is parallel to the current. Finally, we orient the magnetic field parallel to the substrate, but perpendicular to the current, allowing us to distinguish charge hopping at the oxide interface from charge hopping in the bulk. In conclusion, this large off-state magnetoresistance can be exploited for cryogenic magnetic- and photo-detection, and for high-bias, low-leakage MOSFETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Multifunctional Silk Fibroin Hydrogels with Strong Adhesion for Tissue Sealing and Wearable Electronic Sensors

Multifunctional hydrogels with excellent adhesion, biodegradability, and conductivity are essential for overcoming the obstacles of postoperative secondary injury, flexible sensing instability, and so on. Herein, we develop a multifunctional silk fibroin (SF) hydrogel modified with poly(acrylic acid). Owing to the stable chemical cross-linking network and the abundant carboxylic acid groups of the SF network, the SF hydrogel exhibits a high tensile strength of 74.34 kPa due to sufficient cohesion and interfacial interactions. Additionally, the tensile strain reaches a maximum of 414.6%, the compressive strength is 0.9 MPa, and the shear adhesive strength for pig skin tissues is as high as 64 kPa. Compared with most hydrogels, our multifunctional SF hydrogel with a low swelling ratio provides excellent adhesion, biodegradation, and conductivity, which shows advantages in terms of invasive tissue sealing. Furthermore, the use of self-adhesive SF hydrogels as conductive hydrogels in flexible sensors also benefits the collection of physiological electricity and human motion signals in the field of wearable and implantable electronic devices.

adhesive↗
DOE OSTI2022

A computational pipeline to generate a synthetic dataset of metal ion sorption to oxides for AI/ML exploration

The charged mineral/electrolyte interfaces are ubiquitous in the surface and subsurface–including the surroundings of the geological disposal sites for radioactive waste. Therefore, understanding how ions interact with charged surfaces is critically important for predicting radionuclide mobility in the case of waste leakage. At present, the Surface Complexation Models (SCMs) are the most successful thermodynamic frameworks to describe ion retention by mineral surfaces. SCMs are interfacial speciation models that account for the effect of the electric field generated by charged surfaces on sorption equilibria. These models have been successfully used to analyze and interpret a broad range of experimental observations including potentiometric and electrokinetic titrations or spectroscopy. Unfortunately, many of the current procedures to solve and fit SCM to experimental data are not optimal, which leads to a non-transferable or non-unique description of interfacial electrostatics and consequently of the strength and extent of ion retention by mineral surfaces. Recent developments in Artificial Intelligence (AI) offer a new avenue to replace SCM solvers and fitting algorithms with trained AI surrogates. Unfortunately, there is a lack of a standardized dataset covering a wide range of SCM parameter values available for AI exploration and training–a gap filled by this study. Here, we described the computational pipeline to generate synthetic SCM data and discussed approaches to transform this dataset into AI-learnable input. First, we used this pipeline to generate a synthetic dataset of electrostatic properties for a broad range of the prototypical oxide/electrolyte interfaces. The next step is to extend this dataset to include complex radionuclide sorption and complexation, and finally, to provide trained AI architectures able to infer SCMs parameter values rapidly from experimental data. Here, we illustrated the AI-surrogate development using the ensemble learning algorithms, such as Random Forest and Gradient Boosting. These surrogate models allow a rapid prediction of the SCM model parameters, do not rely on an initial guess, and guarantee convergence in all cases.

Li, Chunhui↗
DOE OSTI2022

Charge Transport in Twisted Organic Semiconductor Crystals of Modulated Pitch

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. In this paper, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Final CRADA Report – NFE-21-08693

TAE Technologies is developing a magnetic fusion energy concept known as the beam-driven field-reversed configuration (FRC) with the ultimate goal of developing a reactor for commercial electricity production capable of burning aneutronic pB11 fuel. To achieve the high plasma temperatures this requires, auxiliary radiofrequency (RF) heating will likely be needed. High Harmonic Fast Wave (HHFW) heating has been identified as a candidate RF heating scheme to overcome the unique challenges posed to RF heating by the FRC, including the large distance from the plasma edge to the last closed flux surface and a magnetic field profile with strength decreasing from edge to core and reversing sign at a null point inside the plasma. The purpose of this project was to develop the experimental capabilities to test HHFW on TAE’s C-2W device through the design of a phased array antenna and accompanying matching network. The design was performed by ORNL and informed by experiments with a prototype four-strap phased antenna-array that was manufactured and installed on the LArge Plasma Device (LAPD) at UCLA and simulations conducted with the Petra-M code under the purview of a previous INFUSE grant. The ORNL team completed the conceptual design of the antenna and matching network which was then handed off to the TAE Mechanical Design team. The design was then iterated on to ensure changes to the mechanical design did not interfere with the RF performance. This process is now complete, and, with mechanical design in hand, TAE is proceeding with plans for final integration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Wireless Underground Sensor Network Field Pilot for Agriculture and Ecology: Soil Moisture Mapping Using Signal Attenuation

Wireless Underground Sensor Networks (WUSNs) that collect geospatial in situ sensor data are a backbone of internet-of-things (IoT) applications for agriculture and terrestrial ecology. In this paper, we first show how WUSNs can operate reliably under field conditions year-round and at the same time be used for determining and mapping soil conditions from the buried sensor nodes. We demonstrate the design and deployment of a 23-node WUSN installed at an agricultural field site that covers an area with a 530 m radius. The WUSN has continuously operated since September 2019, enabling real-time monitoring of soil volumetric water content (VWC), soil temperature (ST), and soil electrical conductivity. Secondly, we present data collected over a nine-month period across three seasons. We evaluate the performance of a deep learning algorithm in predicting soil VWC using various combinations of the received signal strength (RSSI) from each buried wireless node, above-ground pathloss, the distance between wireless node and receive antenna (D), ST, air temperature (AT), relative humidity (RH), and precipitation as input parameters to the model. The AT, RH, and precipitation were obtained from a nearby weather station. We find that a model with RSSI, D, AT, ST, and RH as inputs was able to predict soil VWC with an R 2 of 0.82 for test datasets, with a Root Mean Square Error of ±0.012 (m 3 /m 3 ). Hence, a combination of deep learning and other easily available soil and climatic parameters can be a viable candidate for replacing expensive soil VWC sensors in WUSNs.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Theoretical assessment of the transition between electron emission mechanisms in a collisional crossed-field gap

Understanding the transition to the limiting current under vacuum and collisional conditions for thermal-field emission in a crossed-field gap is critical for characterizing the operating regime for numerous applications, such as high-power microwaves and Hall thrusters. By deriving the exact solution for the current density as a function of cathode temperature (and, by extension, initial velocity), cathode electric field, applied voltage, collision frequency, and magnetic field, we determine the transition from the canonical current source (thermal-field emission) to the vacuum and collisional limiting currents under different operating conditions. Here, we further show that the exact solution recovers the asymptotic solutions for the canonical and limiting currents for vacuum and collisional crossed-field gaps under appropriate limits. The exact solution demonstrates that the critical current decreases with both increasing magnetic field strength and increasing collisionality. Nexus phase space plots constructed by matching the individual asymptotic solutions provide the conditions for the transitions between mechanisms, elucidating when a single mechanistic equation would suffice and when theories combining multiple mechanisms are necessary.

Breen, Lorin I. [Purdue Univ., West Lafayette, IN ↗
DOE OSTI2022

High Performance Equilibrium Solvers for Integrated Magnetic Fusion Simulations

With the funding provided by this award, we developed numerical codes for the study of magnetically confined plasmas for fusion applications. Accordingly, our work can be divided into two separate categories: 1) the design and analysis of novel numerical methods providing high accuracy and high efficiency; 2) the study of the equilibrium and stability of magnetically confined plasmas with some of these numerical codes, as well as the study of the nature of the turbulent behavior which may arise in the presence of instabilities. We first developed new numerical schemes based on integral equation methods for the computation of steady-state magnetic configurations in fusion experiments, providing high accuracy for the magnetic field and its derivatives, which are required for stability and turbulence calculations. We employed different integral formulations depending on the application of interest: axisymmetric or non-axisymmetric equilibria, force-free or magnetohydrodynamic equilibria, fixed-boundary equilibria or free-boundary equilibria. While efficient, these methods do not yet apply to plasma boundaries which are not smooth, a situation which is fairly common in magnetic confinement experiments. To address this temporary weakness, we also constructed a new steady-state solver based on the Hybridizable Discontinuous Galerkin (HDG) method, which provides full geometric flexibility. In addition to these numerical tools focused on steady-states, we also contributed to the improvement of the speed and accuracy of codes simulating the plasma dynamics of fusion plasmas, by developing a novel velocity space representation for the efficient solution of kinetic equations, which most accurately describe the time evolution of hot plasmas in fusion experiments. Using the tools discussed above, we studied several questions pertaining to the equilibrium and stability of magnetically confined plasmas. In particular, we derived a new simple model for axisymmetric devices called tokamaks, to predict how elongated a fusion plasma can be before it becomes unstable and collapses. We also looked at the effect of the shape of the outer plasma surface on key properties of the steady-state magnetic configurations, and how these properties impact turbulence in fusion plasmas, and the corresponding transport of momentum. Likewise, we studied the role of large localized flows on the steady-state magnetic configurations, and how they may influence plasma stability and turbulence. Non-axisymmetric steady-state magnetic configurations are inherently more complex than axisymmetric steady-state configurations, and the subject of ongoing controversies regarding the regularity of the equations determining such steady-states, and their solutions. Implementing an existing NYU code in a new geometry, we studied the nature of the singularity of the solutions observed in the code, and methods to eliminate them. Our main conclusion is that by appropriately tailoring the plasma boundary, it is possible to eliminate the singularities otherwise appearing in our simulations, and to obtain steady-states which appear to be smooth. To gain further insights on incompletely understood turbulence phenomena, we proposed a new reduced model capturing most of these phenomena, which is simple enough to not require expensive numerical simulations on massive supercomputers to investigate them. We demonstrated the strong similarity between our simulations and published results obtained from computationally expensive simulations, and plan to rely on our reduced model to identify the key mechanisms determining the evolution and strength turbulent driven transport in fusion plasmas. Finally, we proposed a new framework for tokamak reactor design studies, enabling us to consider the relative merits of steady-state versus pulsed fusion reactors. We found that pulsed fusion reactors may benefit most from recent advances in magnet technology, and the availability of very high field magnets. As such, they may become more desirable than steady-state tokamak reactors for cost efficient electricity generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Ferroelectricity in Si-Doped Hafnia: Probing Challenges in Absence of Screening Charges

The ability to develop ferroelectric materials using binary oxides is critical to enable novel low-power, high-density non-volatile memory and fast switching logic. The discovery of ferroelectricity in hafnia-based thin films, has focused the hopes of the community on this class of materials to overcome the existing problems of perovskite-based integrated ferroelectrics. However, both the control of ferroelectricity in doped-HfO2 and the direct characterization at the nanoscale of ferroelectric phenomena, are increasingly difficult to achieve. The main limitations are imposed by the inherent intertwining of ferroelectric and dielectric properties, the role of strain, interfaces and electric field-mediated phase, and polarization changes. In this work, using Si-doped HfO2 as a material system, we performed a correlative study with four scanning probe techniques for the local sensing of intrinsic ferroelectricity on the oxide surface. Putting each technique in perspective, we demonstrated that different origins of spatially resolved contrast can be obtained, thus highlighting possible crosstalk not originated by a genuine ferroelectric response. By leveraging the strength of each method, we showed how intrinsic processes in ultrathin dielectrics, i.e., electronic leakage, existence and generation of energy states, charge trapping (de-trapping) phenomena, and electrochemical effects, can influence the sensed response. We then proceeded to initiate hysteresis loops by means of tip-induced spectroscopic cycling (i.e., “wake-up”), thus observing the onset of oxide degradation processes associated with this step. Finally, direct piezoelectric effects were studied using the high pressure resulting from the probe’s confinement, noticing the absence of a net time-invariant piezo-generated charge. Our results are critical in providing a general framework of interpretation for multiple nanoscale processes impacting ferroelectricity in doped-hafnia and strategies for sensing it.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of Surface Treatments on the Outgassing of 3D-Printed 316L Stainless Steel.

Fermi National Accelerator Laboratory (Fermilab) is a world leader in designing and operating particle accelerators for nuclear and particle physics research. These accelerators rely on electric fields to propel particle beams, which are then directed and focused using magnetic fields. To ensure these beams travel without interference, they must move through an ultra-high vacuum environment, typically around 10⁻⁹ torr. Maintaining such a vacuum requires materials with exceptionally low outgassing rates. 316L stainless steel is a common material choice for vacuum systems due to its low outgassing rates, excellent corrosion resistance, non-magnetic properties, and high mechanical strength. When manufactured using traditional methods like machining, extrusion, and casting, the vacuum properties of 316L stainless steel are well understood. However, the behavior of 316L stainless steel produced through additive manufacturing, such as Direct Metal Laser Sintering (DMLS), is not as well documented. This study aims to determine the outgassing rate of 316L stainless steel fabricated using DMLS. The investigation focuses on measuring the outgassing rates of 1.5 2 vacuum reducers and evaluating the effects of surface preparation techniques, such as mechanical polishing and electropolishing, on the outgassing performance. Understanding the outgassing performance of 3D-printed 316L stainless steel could enable Fermilab engineers to adopt this fabrication method for producing complex parts designed for ultra-high vacuum environments. These advancements have the potential to benefit projects, such as the Long-Baseline Neutrino Facility (LBNF) and the Proton Improvement Plan-II (PIP-II), by improving design flexibility and fostering innovation in accelerator development.

Cloud, Jaiden [Central State University]↗
DOE OSTI2023

Electric charge and strangeness-dependent directed flow splitting of produced quarks in Au+Au collisions

We report directed flow (v 1 ) of multistrange baryons (Ξ and Ω) and improved v1 data for $K¯$, $\bar{p}$, $\bar{Λ}$ and φ in Au+Au collisions at $\sqrt{s_{NN}} =27$ and 200 GeV from the STAR at the Relativistic Heavy Ion Collider (RHIC). We focus on particles whose constituent quarks are not transported from beam rapidity rather produced in the collisions. In midcentral collisions, we observe a coalescence sum rule for hadron combinations with identical quark content and a difference (“splitting”) in the slope of v 1 vs. rapidity for combinations having nonidentical quark content. The splitting strength appears to increase with the electric charge difference and strangeness content difference of the constituent quarks in the combinations, consistent with an electromagnetic effect. The peripheral collision statistics are insufficient to draw firm conclusions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Quantum computation of phase transition in the massive Schwinger model

Abstract As pointed out by Coleman, physical quantities in the Schwinger model depend on a parameter θ that determines the background electric field. There is a phase transition for θ = π only. We develop a momentum space formalism on a lattice and use it to perform a quantum computation of the critical point of this phase transition on the NISQ device IMB Q Lima. After error mitigation, our results give strong indication of the existence of a critical point at m / e ≃ 0.32, where m is the bare fermion mass and e is the coupling strength, in good agreement with the classical numerical result m / e ≃ 0.3335.

Physics↗
DOE OSTI2020

Ultrahigh capacitive energy density in ion-bombarded relaxor ferroelectric films

Dielectric capacitors can store and release electric energy at ultrafast rates and are extensively studied for applications in electronics and electric power systems. Among various candidates, thin films based on relaxor ferroelectrics, a special kind of ferroelectric with nanometer-sized domains, have attracted special attention because of their high energy densities and efficiencies. We show that high-energy ion bombardment improves the energy storage performance of relaxor ferroelectric thin films. Intrinsic point defects created by ion bombardment reduce leakage, delay low-field polarization saturation, enhance high-field polarizability, and improve breakdown strength. We demonstrate energy storage densities as high as ~133 joules per cubic centimeter with efficiencies exceeding 75%. Deterministic control of defects by means of postsynthesis processing methods such as ion bombardment can be used to overcome the trade-off between high polarizability and breakdown strength.

Kim, Jieun↗
DOE OSTI2025

An Additively Manufactured Fe-3Si Stator for a High-Performance Electrical Motor

Additive manufacturing (AM) has the potential to produce novel high-performance electrical machines, enabling the direct printing of complex shapes and the simultaneous processing of multiple feedstocks in a single build. We examined the properties and functional performance of Fe-3 wt.% Si materials that were printed via selective laser melting, machined down to thin laminates, and stacked to form a stator core of a prototype brushless permanent-magnet electrical motor. Big Area Additive Manufacturing of Nd2Fe14B (NdFeB)–polyphenylene sulfide (PPS) bonded magnets was performed, with them then being magnetized and used for the rotor. The magnetic, mechanical, and electrical properties of the as-printed and various heat-treated thin laminates and the back electromotive force (EMF) of the electrical motors at different rotational speeds were measured. The thin laminates exhibit a maximum relative permeability of 7494 at an applied field of 0.8 Oe and a core loss of about 20 W/lb at 60 Hz with the maximum induction of 15 kg. In addition to the demonstration of AM printing, motor assembly, and complete characterization of printed Fe-3 wt.% Si, this report highlights the areas of improvement needed in printing technologies to achieve AM built electrical motors and the need for isotropic microstructure refinements to make the laminates appropriate for high-mechanical-strength and low-loss rotational electrical devices.

36 MATERIALS SCIENCE↗