Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRONIC STRUCTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electronic structure of boron and aluminum δ -doped layers in silicon

Recent work on atomic-precision dopant incorporation technologies has led to the creation of both boron and aluminum δ-doped layers in silicon with densities above the solid solubility limit. For this study, we use density functional theory to predict the band structure and effective mass values of such δ layers, first modeling them as ordered supercells. Structural relaxation is found to have a significant impact on the impurity band energies and effective masses of the boron layers, but not the aluminum layers. However, disorder in the δ layers is found to lead to a significant flattening of the bands in both cases. We calculate the local density of states and doping potential for these δ-doped layers, demonstrating that their influence is highly localized with spatial extents at most 4 nm. We conclude that acceptor δ-doped layers exhibit different electronic structure features dependent on both the dopant atom and spatial ordering. This suggests prospects for controlling the electronic properties of these layers if the local details of the incorporation chemistry can be fine-tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Lattice and electronic structure of ScN observed by angle-resolved photoemission spectroscopy measurements

Scandium nitride (ScN) has recently attracted much attention for its potential applications in thermoelectric energy conversion, as a semiconductor in epitaxial metal/semiconductor superlattices, as a substrate for GaN growth, and alloying it with AlN for 5G technology. This study was undertaken to better understand its stoichiometry and electronic structure. ScN (100) single crystals 2 mm thick were grown on a single crystal tungsten (100) substrate by a physical vapor transport method over a temperature range of 1900–2000 °C and a pressure of 20 Torr. The core level spectra of Sc 2p 3/2,1/2 and N 1s were obtained by x-ray photoelectron spectroscopy (XPS). The XPS core levels were shifted by 1.1 eV toward higher values as the [Sc]:[N] ratio varied from 1.4 at 1900 °C to ~1.0 at 2000 °C due to the higher binding energies in stoichiometric ScN. Angle-resolved photoemission spectroscopy measurements confirmed that ScN has an indirect bandgap of ~1.2 eV.

42 ENGINEERING↗
DOE OSTI2020

Electronic structure and small-hole polarons in YTiO 3

As a prototypical Mott insulator with ferromagnetic ordering, YTiO 3 (YTO) is of great interest in the study of strong electron correlation effects and orbital ordering. Here we report the first molecular beam epitaxy (MBE) growth of YTO films, combined with theoretical and experimental characterizations of the electronic structure and charge transport properties. The obstacles of YTO MBE growth are discussed and potential routes to overcome them are proposed. DC transport and Seebeck measurements on thin films and bulk single crystals identify p-type Arrhenius transport behavior with an activation energy of ~0.17 eV in thin films, consistent with the energy barrier for small hole polaron migration from hybrid density functional theory calculations. Hard x-ray photoelectron spectroscopy measurements show the lower Hubbard band at 1.1 eV below the Fermi level, whereas a Mott-Hubbard band gap of ~1.5 eV is determined from photoluminescence measurements. These findings provide critical insight into the electronic band structure of YTO and related materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires

Abstract Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, that is, strong spin‐orbit interaction and large Landé g‐factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, the combination of the II–VI cadmium telluride (CdTe) with the III–V InSb in the form of core–shell (InSb–CdTe) nanowires is investigated and potential applications based on the electronic structure of the InSb–CdTe interface and the epitaxy of CdTe on the InSb nanowires are explored. The electronic structure of the InSb–CdTe interface using density functional theory is determined and a type‐I band alignment is extracted with a small conduction band offset ( ⩽0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of structural quality, it is demonstrated that the lattice‐matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These shells do not introduce disorder to the InSb nanowires as indicated by the comparable field‐effect mobility measured for both uncapped and CdTe‐capped nanowires.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular dopants: Tools to control the electronic structure of metal halide perovskite interfaces

In the standard configurations of metal halide perovskite solar cell, the active layer, or absorber, follows a p-i-n or n-i-p electronic structure that is designed to enhance the separation and extraction of photo-induced charge carriers. The control of the Fermi level position across the film, between electron and hole transport layers, is therefore of paramount importance. Direct localized doping in metal halide perovskites being still elusive, the design of n-i-p and p-i-n structures has so far relied predominantly on surface and interface doping of the perovskite as well as on the control of the work function of the substrate and transport layers on which, or between which, the absorber is being placed. We provide here a short review of that work, emphasizing the fundamental studies of electronic structure performed on systems modified with organic molecular dopants. The review starts with a justification for the effectiveness of interface doping, based on the ability to move the Fermi level across the gap of the perovskite. We then review work done on the deposition of molecular oxidants and reductants on perovskite surfaces, including the mitigation of the surface states, and the impact of these dopants on energy level alignment with substrate and charge transport layers. The second part of the review focuses on the use of molecular dopants to either modify the work function of electron or hole transport layers to establish the boundary conditions for a p-i-n or n-i-p structure, or to enhance the conductivity of these layers in order to facilitate charge carrier extraction. Final considerations are also given on recent work on bulk doping of the perovskite layer with molecular dopants.

14 SOLAR ENERGY↗
DOE OSTI2025

Electronic Structural Optimization of the Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells via IIIA Cation Doping

Reversible protonic ceramic electrochemical cells (R-PCECs) have emerged as a novel technology for clean and efficient energy generation and storage. Improving the oxygen and proton conduction characteristics and stability of air electrodes at intermediate temperatures is crucial for achieving a high performance. Herein, we optimize the electronic structure of a state-of-the-art PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) air electrode via doping IIIA cations (Al 3+ , Ga 3+ , and In 3+ ). Also, it is shown that PrBa 0.8 Ca 0.2 Co 1.9 Ga 0.10 O 5+δ (PBCCGa 0.10 ) exhibits improved oxygen reaction activity and hydration capability. Density functional theory calculations confirm that Ga doping provides the most favorable electronic structure. An R-PCEC with PBCCGa 0.10 achieves a peak power density of 2.21 W cm -2 and a current density of −4.64 A cm -2 at 1.3 V at 650 °C. Additionally, the PBCCGa 0.10 electrode performs good operational stability in FC mode (for about 100 h), EC mode (for about 100 h), and reversible cyclic testing (over 200 h) at 600 °C.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Monolayer Superconductivity and Tunable Topological Electronic Structure at the Fe(Te,Se)/Bi 2 Te 3 Interface

The interface between 2D topological Dirac states and an s-wave superconductor is expected to support Majorana-bound states (MBS) that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum-locked topological interface states (TIS) which are simultaneously superconducting. While signatures of MBS have been observed in the magnetic vortex cores of bulk FeTe 0.55 Se 0.45 , inhomogeneity and disorder from doping make these signatures unclear and inconsistent between vortices. In this work, superconductivity is reported in monolayer (ML) FeTe 1–y Se y (Fe(Te,Se)) grown on Bi 2 Te 3 by molecular beam epitaxy (MBE). Spin and angle-resolved photoemission spectroscopy (SARPES) directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi 2 Te 3 heterostructures. For y = 0.25, the Fe(Te,Se) electronic structure is found to overlap with the Bi 2 Te 3 TIS and the desired spin-momentum locking is not observed. In contrast, for y = 0.1, reduced inhomogeneity measured by scanning tunneling microscopy (STM) and a smaller Fe(Te,Se) Fermi surface with clear spin-momentum locking in the topological states are found. Hence, it is demonstrated that the Fe(Te,Se)/Bi 2 Te 3 system is a highly tunable platform for realizing MBS where reduced doping can improve characteristics important for Majorana interrogation and potential applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Trends in actinide electronic structure revealed from asymmetric, isostructural transuranic metallocenes

The study of actinide electronic structure and bonding within rigorously controlled environments is fundamental to advancing nuclear applications. Here, we report a new set of isostructural actinide organometallics; An(COT big ) 2 , (An = Th, U, Np, and Pu), where COT big is the bulky 1,4-bis(triphenylsilyl)-substituted cyclooctatetraenyl dianion (1,4-(Ph 3 Si) 2 C 8 H 6 ) 2 -. The actinide(IV) metallocene sandwiches have a clam-shell structure, offering a new molecular symmetry to explore f-orbital contributions in bonding. Combined experimental and computational studies reveal that An(COT big ) 2 complexes strongly differ from the previously published coplanar An(COT) 2 sandwiches due to the bent geometry and electron-withdrawing nature of the substituents. While COT big displays comparatively weaker electron donation, the low-energy f-f transitions in An(COT big ) 2 have increased molar absorptivity consistent with the removal of the parity selection rule and better energetic matching between ligand and actinide 5f orbitals as the series is traversed. For Pu(COT big ) 2 , covalent mixing of donor 5f metal orbitals and the ligand-π orbitals is especially strong.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Finding the order in complexity: The electronic structure of 14-1-11 zintl compounds

Yb 14 MnSb 11 and Yb 14 MgSb 11 have rapidly risen to prominence as high-performing p-type thermoelectric materials. However, the fairly complex crystal structure of A 14 MX 11 Zintl compounds renders the interpretation of the electronic band structure obscure, making it difficult to chemically guide band engineering and optimization efforts. In this work, we delineate the valence-balanced Zintl chemistry of A 14 MX 11 compounds using the molecular orbital theory. By analyzing the electronic band structures of Yb 14 MgSb 11 and Yb 14 AlSb 11 , we show that the conduction band minimum is composed of either an antibonding molecular orbital originating from the (Sb 3 ) 7– trimer or a mix of atomic orbitals of A, M, and X. The singly degenerate valence band is comprised of non-bonding Sb pz orbitals primarily from the Sb atoms in the (MSb 4 ) m– tetrahedra and of isolated Sb atoms distributed throughout the unit cell. Such a chemical understanding of the electronic structure enables strategies to engineer electronic properties (e.g., the bandgap) of A 14 MX 11 compounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Mapping resonant inelastic x-ray scattering onto electronic structure of iridium compounds

Resonant inelastic X-ray scattering (RIXS) is an indispensable tool that can selectively probe the electronic structure of active sites in energy conversion systems, for example, iridium oxides. However, decoding the RIXS spectra remains challenging due to its inherently complex many-body interactions. Here, we analyze Ir L 3 edge RIXS spectra of Ir, IrCl 3 , and IrO 2 , employing the joint density of states (JDOS) calculated directly from electronic band-structure calculations. The overall energy-loss features in the RIXS spectra are well reproduced by the JDOS, reaffirming the close correspondence between electron–hole excitations and RIXS spectra observed in prior studies. Intriguingly, the RIXS spectra above ∼4 eV in metallic Ir and IrO 2 follow a power-law behavior, 𝐼 RIXS ~Δ −𝑝 , where Δ is the energy loss and p is the associated power-law exponent. This is consistent with edge-singularity behavior commonly found in resonant X-ray scattering from metallic samples. Furthermore, orbital-projected JDOS enables a decomposition of the IrO 2 spectrum into specific dd transitions, providing a clear interpretation of orbital excitations and an efficient strategy for decoding RIXS spectra in iridium-based energy conversion systems.

5d↗
DOE OSTI2022

Sampling electronic structure quadratic unconstrained binary optimization problems (QUBOs) with Ocean and Mukai solvers

The most advanced D-Wave Advantage quantum annealer has 5000+ qubits, however, every qubit is connected to a small number of neighbors. As such, implementation of a fully-connected graph results in an order of magnitude reduction in qubit count. To compensate for the reduced number of qubits, one has to rely on special heuristic software such as qbsolv, the purpose of which is to decompose a large quadratic unconstrained binary optimization (QUBO) problem into smaller pieces that fit onto a quantum annealer. In this work, we compare the performance of the open-source qbsolv which is a part of the D-Wave Ocean tools and a new Mukai QUBO solver from Quantum Computing Inc. (QCI). The comparison is done for solving the electronic structure problem and is implemented in a classical mode (Tabu search techniques). The Quantum Annealer Eigensolver is used to map the electronic structure eigenvalue-eigenvector equation to a QUBO problem, solvable on a D-Wave annealer. We find that the Mukai QUBO solver outperforms the Ocean qbsolv with one to two orders of magnitude more accurate energies for all calculations done in the present work, both the ground and excited state calculations. This work stimulates the further development of software to assist in the utilization of modern quantum annealers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Hole–hole Tamm–Dancoff-approximated density functional theory: A highly efficient electronic structure method incorporating dynamic and static correlation

The study of photochemical reaction dynamics requires accurate as well as computationally efficient electronic structure methods for the ground and excited states. While time-dependent density functional theory (TDDFT) is not able to capture static correlation, complete active space self-consistent field methods neglect much of the dynamic correlation. Hence, inexpensive methods that encompass both static and dynamic electron correlation effects are of high interest. Here, we revisit hole–hole Tamm–Dancoff approximated (hh-TDA) density functional theory for this purpose. The hh-TDA method is the hole–hole counterpart to the more established particle–particle TDA (pp-TDA) method, both of which are derived from the particle–particle random phase approximation (pp-RPA). In hh-TDA, the N-electron electronic states are obtained through double annihilations starting from a doubly anionic (N+2 electron) reference state. In this way, hh-TDA treats ground and excited states on equal footing, thus allowing for conical intersections to be correctly described. Furthermore, the treatment of dynamic correlation is introduced through the use of commonly employed density functional approximations to the exchange-correlation potential. Additionally, we show that hh-TDA is a promising candidate to efficiently treat the photochemistry of organic and biochemical systems that involve several low-lying excited states—particularly those with both low-lying ππ* and nπ* states where inclusion of dynamic correlation is essential to describe the relative energetics. In contrast to the existing literature on pp-TDA and pp-RPA, we employ a functional-dependent choice for the response kernel in pp- and hh-TDA, which closely resembles the response kernels occurring in linear response and collinear spin-flip TDDFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic characterization of electronic structures of ultra-thin single crystal La0.7Sr0.3MnO3

Abstract We have successfully fabricated high quality single crystalline La 0.7 Sr 0.3 MnO 3 (LSMO) film in the freestanding form that can be transferred onto silicon wafer and copper mesh support. Using soft x-ray absorption (XAS) and resonant inelastic x-ray scattering (RIXS) spectroscopy in transmission and reflection geometries, we demonstrate that the x-ray emission from Mn 3 s -2 p core-to-core transition (3 s PFY) seen in the RIXS maps can represent the bulk-like absorption signal with minimal self-absorption effect around the Mn L 3 -edge. Similar measurements were also performed on a reference LSMO film grown on the SrTiO 3 substrate and the agreement between measurements substantiates the claim that the bulk electronic structures can be preserved even after the freestanding treatment process. The 3 s PFY spectrum obtained from analyzing the RIXS maps offers a powerful way to probe the bulk electronic structures in thin films and heterostructures when recording the XAS spectra in the transmission mode is not available.

36 MATERIALS SCIENCE↗
DOE OSTI2024

First-principles calculation of lattice distortion, electronic structure, and bonding properties of GeTe-based and PbSe-based high-entropy chalcogenides

The massive amount of wasted heat energy from industry has pushed the development of thermoelectric (TE) materials that directly convert heat into electricity to a new level of concern. Recently, multicomponent alloys such as GeTe-based and PbSe-based high-entropy (HE) chalcogenides have attracted a great deal of attention due to their potential application as TE materials. The nature of the interatomic bonding, lattice distortion (LD), and the electronic structure in this class of materials is not fully understood. Herein, we report a comprehensive computational investigation of nine GeTe-based HE alloys with eight metallic elements (Ag, Pb, Sb, Bi, Cu, Cd, Mn, and Sn) with large supercells of 1080 atoms each; seven PbSe-based HE solid solutions: Pb0.99−ySb0.012SnySe1−2xTexSx (x = 0.1, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, with y = 0) with supercells of 1000 atoms each; and five Pb0.99−ySb0.012SnySe1−2xTexSx (y = 0.05, 0.1, 0.15, 0.2, 0.25 with x = 0.25) solid solutions with supercells of 1000 atoms each. All these HE models are theoretically investigated for the first time. The electronic structure, interatomic bonding, charge transfer, and lattice distortion (LD) are investigated by first-principles calculations based on density functional theory. Multicomponent HE alloys can cause a significant LD, which affects their mechanical, thermal, and TE properties. The calculations for the GeTe-based HE chalcogenides showed that they are semiconductors with a narrow bandgap, except for m8, which has a semi-metallic characteristic, and this makes them good candidates for TE applications. For most of these models, the Fermi level shifts upward and locates deeply in the conduction bands, resulting in the enhancement of the electrical conductivity (σ). The bonding properties showed that most bonds in m5 are more dispersed, indicating highest LD and lower lattice thermal conductivity. For PbSe-based HE solid solutions, the LD calculations showed that the models Pb0.99Sb0.012Se0.5Te0.25S0.25 and Pb0.89Sb0.012Sn0.1Se0.5Te0.25S0.25 have the higher LD, and thus a lower lattice thermal conductivity. Such investigations are in high demand since it enables us to design new HE chalcogenides for TE applications. We use the novel concept of total bond order density as a single quantum mechanical metric to characterize the internal cohesion of these HE alloys and correlate with calculated properties, especially the mechanical properties. This work provides a solid database for HE chalcogenides and a road map for many potential applications. Moreover, the computational procedure we developed can be used to design new HE chalcogenides for specific TE applications.

Physics↗
DOE OSTI2025

Electronic structure theory with molecular point group symmetries on quantum annealers

Quantum computation has the potential to revolutionize quantum chemistry through major speedups in computation times and an exponential reduction in computational resources. Here, we combine the symmetry-adapted Jordan–Wigner encoding based on the full Boolean symmetry group $\mathbb{Z}$$^{k}_{2}$ with our new implementation of the Xia–Bian–Kais (XBK) method for improving the efficiency of electronic structure theory calculations on quantum annealers, particularly by reducing the number of qubits needed to achieve the same accuracy. By providing a more extensive symmetry-adapted encoding (SAE) than previous work, we are able to simulate molecules larger than those previously reported that have been studied using methods developed for quantum annealers and without using an active space. We calculated the potential energy surfaces of H 2 , LiH, He 2 , H 2 O, O 2 , N 2 , Li 2 , F 2 , CO, BH 3 , NH 3 , and CH 4 , with the largest molecule in the STO-6G basis set requiring 16 qubits with our SAE, and compared them with full configuration interaction results. The application of SAE to the XBK method provides an exponential reduction in the size of the Hilbert space and scales well with the size of the problem. It does not introduce significant additional errors for even or large values of a key variational parameter that determines the number of ancilla qubits used in the XBK method’s Hamiltonian embedding, or for certain molecules such as He 2 and H 2 O. Here, we provide an explanation for this behavior and a recommendation on the usage of our method. In addition, we briefly discuss the potential of extracting electronic excited states from our method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Electronic structure analysis and DFT benchmarking of Rydberg-type alkali-metal-crown ether, -cryptand, and -adamanzane complexes

Density functional theory (DFT) and electron propagator theory (EPT) calculations were performed to study ground and excited electronic structures of alkali-metal (M) coordinated 9-crown-3, 24-crown-8, [2.1.1]cryptand, o-Me 2 -1.1.1, and 3 6 Adamanzane complexes. Each complex bears an expanded electron in the periphery and occupies diffuse 1p-, 1d-, 1f-type molecular orbitals (or superatomic 1P, 1D, 1F orbitals) in excited electronic states. The calculated superatomic shell model of the M(9-crown-3) 2 is 1S, 1P, 1D, 1F, 2S, 2P, 2D, 1G and it is held by all other complexes up to the studied 1F level. Due to the highly diffuse nature of the electron, the ionization energies of these complexes are significantly lower (1.6–2.0 eV) and hence these complexes belong to the superalkali category. Further, the ab initio EPT ionization energy and the excitation energies of the Li(9-crown-3) 2 were used to evaluate DFT errors associated with a series of exchange correlation functionals that span multiple rungs of Jacob's ladder (i.e., GGA, meta-GGA, global GGA hybrid, meta-GGA hybrid, range-separated hybrid, double-hybrid). Among these, the best performing functional is the range-separated hybrid CAM-B3LYP and the errors are within 6% of high-level ab initio EPT results. The accuracy of CAM-B3LYP is indeed transferable to similar complexes and hence the findings are expected to accelerate the progression of studies of Rydberg-type systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Strain induced electronic structure, and magnetic and structural properties in quaternary Heusler alloys ZrRhTiZ (Z = Al, In)

In this work, electronic structure, and magnetic and structural properties of quaternary Heusler alloys ZrRhTiZ (Z = Al, In) have been analyzed from first principles calculations. The ferromagnetic ground state and thermodynamical stability of these compounds are supported by relative total energies, and by derived formation and cohesive energies, respectively. The investigated Curie temperatures of the compounds exceed room temperature indicating that these compounds are promising candidates for beyond room temperature spintronics and magneto-electronics applications. Both compounds follow the Slater-Pauling 18 electron rule and exhibit half-metallic ferromagnetic behavior with magnetic moments of 2 μB with 100% spin polarization in one spin channel at the Fermi-level. The effect of uniform strain on half-metallicity of these compounds inverts the band gap from one spin channel to another spin channel with a mixed spin (magnetic moment) regime that can be mapped to an exchange bias like effect observed in some of the magnetic Heusler compounds. The half metallic ferromagnetic behavior is retained within –2 to 2% strain contrasting with the anomalous spin flip in –1% and 1% strain in ZrRhTiZ (Z = Al, In).

36 MATERIALS SCIENCE↗