Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electron Heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Plasma heating by electron cyclotron wave and the temperature effects on lower hybrid current drive on EAST

This paper presents the progress in the long—pulse operation of the electron cyclotron (EC) system and the achievements in high—electron temperature plasmas by the combined EC and lower hybrid (LH) waves heating since the EC system was built in 2015. An electron temperature of up to 12 keV with a duration over 100 s was realized by the simultaneous heating of EC and LH waves at the line-averaged density ${\bar n_{\text{e}}}$ ~1.8 × 10 19 m –3 . The plasma heating effect strongly depends on the location of EC power deposition. H-mode plasmas with solely EC wave auxiliary heating have been obtained on EAST for the first time. These H-mode discharges show an enhanced confinement factor H 98(y,2) around 1.0, which is higher than the previous H-mode using LH power alone (Xu et al 2011 Nucl. Fusion 51 072001). The total heating power is very close to the threshold value for L–H transition according to the international tokamak scaling. In addition to the temperature effects inside the separatrix, higher electron temperature produced by EC wave is found to reduce the LH power loss in the scrape-off layer due to collisional absorption, which is beneficial to further increase the LH current drive efficiency. Ray-tracing/Fokker–Planck modeling results indicate that higher electron temperature can shorten the LH wave propagation on EAST in a multiple-pass regime, thus decreasing the collisional dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1993

Signatures of shock drivers in the solar wind and their dependence on the solar source location

Solar wind and energetic ion observations following 40 interplanetary shocks with well-established solar source locations have been examined in order to determine whether signatures characteristic of the coronal material forming the shock driver are present. The signatures considered include magnetic-field-aligned bidirectional ion flows observed by the ISEE 3 and IMP 8 spacecraft; bidirectional solar wind electron heat fluxes; solar wind plasma proton and electron temperature depressions; low-beta plasma; enhanced, low-variance magnetic fields; and energetic ion depressions. Several shock driver signatures are commonly observed following shocks originating from within about 50 deg of central meridian, and are generally absent for other events. We conclude that shock drivers generally extend up to about 100 deg in longitude, centered on the solar source longitude. Since shocks from central meridian events are not usually associated with all the shock driver signatures examined, the absence of a driver cannot be confirmed from consideration of one of these signatures alone. We also find evidence that a few bidirectional energetic ion and solar wind electron heat flux events following shocks (in particular from far eastern sources) may occur on open field lines outside of shock drivers.

Richardson, I. G.↗
DOE OSTI2023

Real-time estimation of the electron temperature profile in DIII-D by leveraging neural-network surrogate models

Control of both the magnitude and the shape of tokamak profiles will be necessary to achieve stable, high-performance plasmas. In order to reject disturbances in real time, feedback-control algorithms rely on accurate real-time knowledge of the plasma state. When diagnostics alone are insufficient, either because they are limited in number or their measurements are too noisy, observers can be used to combine diagnostic data with a response model to provide a better estimation of different plasma properties. An observer has been developed to estimate the electron temperature profile in real time using both diagnostic data from the Thomson scattering system and a model based on the electron heat transport equation describing the evolution of the electron temperature profile. Here, neural network surrogate models are leveraged to help improve the overall model prediction while staying within computation time constraints for real-time use. The observer algorithm is shown in offline tests to produce smooth profiles that are consistent with both the diagnostic data and the electron heat transport equation. When implemented into the real-time plasma control system, this observer will provide valuable information on the electron temperature profile to many potential feedback-control applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2023

Direct Observation of Electron Temperature Anisotropy Localized to One Separatrix during Electron-Only Magnetic Reconnection in a Laboratory Plasma

Anisotropic electron heating, Te∥/Te⊥ > 1 (relative to the local magnetic field) during electron-only magnetic reconnection with a large guide field is directly measured in a laboratory plasma through multi-dimensional incoherent Thomson scattering measurements of the electron velocity distribution function. The preferentially parallel electron heating is localized to one separatrix in the reconnection plane and anisotropies of 1.5 are observed. The localization of the heating to one separatrix and the anisotropy are reproduced with a 2D particle-in-cell simulation. The characteristics of the anisotropic heating are consistent with predictions for electron energization by the parallel reconnection electric field under strong guide field. The effective electron temperature is found to increase throughout the outflow region, a possible indication of the effects of collisions and the fully 3D nature of magnetic reconnection in the experiment.

Peiyun Shi↗
NASA NTRS2006

Dynamic Theory of Relativistic Electrons Stochastic Heating by Whistler Mode Waves with Application to the Earth Magnetosphere

In the Hamiltonian approach an electron motion in a coherent packet of the whistler mode waves propagating along the direction of an ambient magnetic field is studied. The physical processes by which these particles are accelerated to high energy are established. Equations governing a particle motion by group symmetries of the problem were transformed in to a closed pair of nonlinear difference equations. The solutions of these equations have shown there exists the energetic threshold below that the electron motion is regular, and when the initial energy is above the threshold an electron moves stochastically. It is proved that the upper boundary of particle stochastic heating is conditioned by intrinsic property of the particle chaotic motion. Particle energy spectra and pitch angle electron scattering are described by the Fokker-Planck-Kolmogorov equations. It is shown that significant pitch angle diffusion occurs for the Earth radiation belt electrons with energies from a few keV up to a few MeV.

Khazanov, G. V.↗
NASA NTRS1990

Electron-positron heating and the eclipsing millisecond pulsar PSR 1957 + 20

The companion in the eclipsing millisecond PSR 1957 + 20 appears to be strongly heated by the pulsar and may also be rapidly losing mass due to that heating. A new mechanism is presented by which the heating may be accomplished: diffusion of mildly relativistic electron-positron pairs from the pulsar's relativistic wind through a thermal wind issuing from the companion. Wave-particle scattering regulates the depth at which the pairs deposit their energy; requirements of self-consistency place bounds on the wave spectrum and pair distribution function. If the pairs carry over about 10 percent of the pulsar spin-down luminosity, and the companion's heavy element abundance is subsolar, the heating rate can be adequate to drive a wind with sufficient momentum flux to explain the eclipse geometry. Annihilation photons then heat the companion beneath its photosphere and supply a significant part of the power for the optical luminosity. This model also suggests that the eclipse duration decreases sharply above a critical photon frequency.

Krolik, Julian H.↗
DOE OSTI2020

X-ray heating and electron temperature of laboratory photoionized plasmas

We discuss experimental and modeling results for the x-ray heating and temperature of laboratory photoionized plasmas. A method is used to extract electron temperature based on the analysis of transmission spectroscopy data that is independent of atomic kinetics modeling. Boltzmann kinetic and radiation-hydrodynamics simulations emphasized the critical interplay between atomic physics and heating in photoionized plasmas. They also demonstrated the dramatic impact of photoexcitation on excited state populations, line emissivity, and radiation cooling. Temperature calculations performed with astrophysical codes significantly overestimated the measurement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Perpendicular heating of electrons by upper hybrid waves generated by a ring distribution

Satellite observations of electron conical distributions with enhanced fluxes just outside the loss cone suggest that telectrons have been heated perpendicularly to the magnetic field in the mid-altitude polar magnetosphere. To understand electron conical distributions, plasma simulations are conducted to examine an upper hybrid wave instability of a ring electron distribution perpendicular to the magnetic field in a cold electron background. The simulations indicate that both the cold and ring distributions are heated perpendicularly during the saturation stage. From the plasma data, a ring distribution can be identified as a trapped distribution function with an enhancement near 90-deg pitch angle in the phase space density plot. It is suggested that the ring distribution might provide an additional free energy source for generating upper hybrid waves associated with electron conical events.

Lin, C. S.↗
DOE OSTI2020

Dependence of the impurity transport on the dominant turbulent regime in ELM-y H-mode discharges on the DIII-D tokamak

Laser blow-off injections of aluminum and tungsten have been performed on the DIII-D tokamak to investigate the variation of impurity transport in a set of dedicated ion and electron heating scans with a fixed value of the external torque. The particle transport is quantified via the Bayesian inference method, which, constrained by a combination of a charge exchange recombination spectroscopy, soft X-ray measurements, and VUV spectroscopy provides a detailed uncertainty quantification of transport coefficients. Contrasting discharge phases with a dominant electron and ion heating reveal 3-fold drop in the impurity confinement time and order of magnitude increase in midradius impurity diffusion, when additional electron heating is applied. Further, the calculated stationary aluminum density profiles reverse from peaked in electron heated to hollow in the ion heated case, following a similar trend as electron and carbon density. Comparable values of a core diffusion have been observed for W and Al ions, while differences in the propagation dynamics of these impurities are attributed to pedestal and edge transport. Modeling of the core transport with non-linear gyrokinetics code CGYRO, significantly underpredicts the magnitude of the variation in Al transport. Diffusion increases 3-times steeper with additional electron heat flux and 10-times lower diffusion is observed in ion heated case than predicted by the modeling. Here, the CGYRO model quantitatively matches the increase of the Al diffusion when approaching the linear threshold for the transition from the ion temperature gradient (ITG) to trapped electron mode (TEM).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electron hopping heat transport in molecules

The realization of single-molecule thermal conductance measurements has driven the need for theoretical tools to describe conduction processes that occur over atomistic length scales. In macroscale systems, the principle that is typically used to understand thermal conductivity is Fourier’s law. At molecular length scales, however, deviations from Fourier’s law are common in part because microscale thermal transport properties typically depend on the complex interplay between multiple heat conduction mechanisms. Here, the thermal transport properties that arise from electron transfer across a thermal gradient in a molecular conduction junction are examined theoretically. We illustrate how transport in a model junction is affected by varying the electronic structure and length of the molecular bridge in the junction as well as the strength of the coupling between the bridge and its surrounding environment. Three findings are of note: First, the transport properties can vary significantly depending on the characteristics of the molecular bridge and its environment; second, the system’s thermal conductance commonly deviates from Fourier’s law; and third, in properly engineered systems, the magnitude of electron hopping thermal conductance is similar to what has been measured in single-molecule devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

A study of selected radiation and propagation problems related to antennas and probes in magneto-ionic media

Research consisted of computations toward the solution of the problem of the current distribution on a cylindrical antenna in a magnetoplasma. The case of an antenna parallel to the applied magnetic field was investigated. A systematic method of asymptotic expansion was found which simplifies the solution in the general case by giving the field of a dipole even at relatively short range. Some useful properties of the dispersion surfaces in a lossy medium have also been found. A laboratory experiment was directed toward evaluating nonlinear effects, such as those due to power level, bias voltage and electron heating. The problem of reflection and transmission of waves in an electron heated plasma was treated theoretically. The profile inversion problem has been pursued. Some results are very encouraging, however, the general question of stability of the solution remains unsolved.

Source record↗
NASA NTRS2007

Dynamic Theory of Relativistic Electrons Stochastic Heating by Whistler Mode Waves with Application to the Earth Magnetosphere

In the Hamiltonian approach an electron motion in a coherent packet of the whistler mode waves propagating along the direction of an ambient magnetic field is studied. The physical processes by which these particles are accelerated to high energy are established. Equations governing a particle motion were transformed in to a closed pair of nonlinear difference equations. The solutions of these equations have shown there exists the energetic threshold below that the electron motion is regular, and when the initial energy is above the threshold an electron moves stochastically. Particle energy spectra and pitch angle electron scattering are described by the Fokker-Planck-Kolmogorov equations. Calculating the stochastic diffusion of electrons due to a spectrum of whistler modes is presented. The parametric dependence of the diffusion coefficients on the plasma particle density, magnitude of wave field, and the strength of magnetic field is studies. It is shown that significant pitch angle diffusion occurs for the Earth radiation belt electrons with energies from a few keV up to a few MeV.

Khazanov, G. V.↗
NASA NTRS1983

Chromospheric heating by electron and proton bombardment in the solar flare of June 7, 1980

Using observations of both hard X rays and gamma rays in the large solar flare on June 7, 1980, the amount of chromospheric heating due to bombardment both by nonthermal electrons and by protons, respectively, are inferred. If a thick-target model for the X ray bremsstrahlung is adopted, then proton heating is shown to be important only in the lower chromosphere: however, if the hard X rays are substantially thermal in origin, then proton heating may play an important or indeed dominant role in determining the structure of the entire flaring chromosphere.

Emslie, A. G.↗
DOE OSTI2024

Modeling electron temperature profiles in the pedestal with simple formulas for ETG transport

Abstract This paper reports on the refinement (building on (Hatch D.R. et al 2022 Phys. Plasmas 29 062501)) and application of simple formulas for electron heat transport from electron temperature gradient (ETG) driven turbulence in the pedestal. The formulas are improved by (1) improving the parameterization for certain key parameters and (2) carefully accounting for the impact of geometry and shaping in the underlying gyrokinetic simulation database. Comparisons with nonlinear gyrokinetic simulations of ETG transport in the MAST pedestal demonstrate the model’s applicability to spherical tokamaks in addition to standard aspect ratio tokamaks. We identify bounds for model applicability: the model is accurate in the steep gradient region, where the ETG turbulence is largely slab-like, but accuracy decreases as the temperature gradient becomes weaker in the pedestal top. We use the formula to model the electron temperature profile in the pedestal for four experimental scenarios while extensively varying input parameters to represent uncertainties. In all cases, the predicted electron temperature profile exhibits extreme sensitivity to separatrix temperature and density, which has implications for core-edge integration. The model reproduces the electron temperature profile for high η e = L n e / L T e scenarios but not for low η e scenarios in which microtearing modes (MTMs) have been identified. We develop a proof-of-concept model for MTM transport and explore the relative roles of ETG and MTM in setting the electron temperature profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

Electrostatic waves and anomalous transport in the solar wind

In situ measurements of fluctuation spectra and particle distribution functions have now been carried out throughout interplanetary space. The link between these observations is established by theories of wave particle interaction. Linear instability analysis for the actual nonMaxwellian particle distribution functions and an examination of the velocity dependence of microscopic diffusion coefficients form the basis of such an investigation. It is described in more detail for the short wavelength, ion acoustic like turbulence which is found by linear instability analysis to correspond to the observed electrostatic fluctuations. Of the transport processes associated with these fluctuations, electron heat conduction and electron ion energy transfer are of particular importance for macroscopic solar wind expansion. These effects are studied with the aid of an anomalous transport theory. This theory (Dum, 1978 a,b) is based on the dominance of elastic scattering of electrons by fluctuations, similar to (enhanced) electron ion collisions. It has a much wider range of applicability than classical transport theory, which assumes dominance of Coulomb collisions for elastic and inelastic scattering.

Dum, C. T.↗
NASA NTRS1984

Observational evidence for chromospheric footpoint penetration of nonthermal electrons during two well-observed flares

Recent advances have enabled simultaneous H-alpha and X-ray observations with substantially improved spatial, spectral, and temporal resolution. In this paper a study is conducted of two events observed as part of a coordinated observing program between the Solar Maximum Mission and Sacramento Peak Observatory: the flares of 1456 UT, 7 May 1980 and 1522 UT, 24 June 1980. Using recently developed physical models of static flare chromospheres, and corresponding theoretical H-alpha line profiles, effects of intense nonthermal electron heating can be distinguished from those of high conduction and pressure from the overlying flare corona. Both flares show the signature of intense chromospheric heating by fast electrons, temporally correlated with X-ray light curves at E greater than 27keV, and spatially associated with X-ray emission sites at E greater than 16 keV. Interpreting the H-alpha line profile observations using the theoretical H-alpha line profiles, values of the thick-target input power contained in nonthermal electrons that are observationally indistinguishable (within a factor of 2-3) from those inferred from the X-ray data are inferred. Although these events are small, the energy flux values are large: of order 10 to the 11th ergs per sq cm per s above 20 keV.

Canfield, R. C.↗
NASA NTRS1986

The evolution of the spatial structure of thick-target hard X-ray emission in solar flares

The spatial distribution of hard X-ray bremsstrahlung emission from an electron-heated target is examined, using a self-consistent calculation of the hydrodynamic response of the atmosphere to heating by the electrons to compute the density-height structure of the target atmosphere at various times. In this way the temporal evolution of the hard X-ray spatial structure at various photon energies is predicted. These results are compared with existing observations from the SMM Hard X-Ray Imaging Spectrometer to give a prognosis for the type of structure to be expected at the subarcsec resolution planned for future instrumentation.

Emslie, A. G.↗
DOE OSTI2024

In-situ heating-and-electron tomography for materials research: from 3D ( In-situ 2D) to 4D ( In-situ 3D)

In-situ observation has expanded the application of transmission electron microscopy (TEM) and has made a significant contribution to materials research and development for energy, biomedical, quantum, etc. Recent technological developments related to in-situ TEM have empowered the incorporation of three-dimensional observation, which was previously considered incompatible. In this review article, we take up heating as the most commonly used external stimulus for in-situ TEM observation and overview recent in-situ TEM studies. Then, we focus on the electron tomography (ET) and in-situ heating combined observation by introducing the authors’ recent research as an example. Assuming that in-situ heating observation is expanded from two dimensions to three dimensions using a conventional TEM apparatus and a commercially available in-situ heating specimen holder, the following in-situ heating-and-ET observation procedure is proposed: (i) use a rapid heating-and-cooling function of a micro-electro-mechanical system holder; (ii) heat and cool the specimen intermittently and (iii) acquire a tilt-series dataset when the specimen heating is stopped. This procedure is not too technically challenging and can have a wide range of applications. Essential technical points for a successful 4D (space and time) observation will be discussed through reviewing the authors’ example application.

36 MATERIALS SCIENCE↗