Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electronic shell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Gold L-shell emission spectroscopy as a temperature diagnostic in laser-driven experiments

Measurements of plasma conditions within gold hohlraums are challenging but provide important information about hohlraum energy transport. To date, there are no reliable passive diagnostic approaches that produce information about the hohlraum plasma conditions. Gold L-shell emission spectroscopy is a promising method to measure the electron temperature in multi-keV gold hohlraum plasmas. In this study, we compare time-resolved measurements of gold L-shell spectra against a more conventional electron temperature-sensitive diagnostic, K-shell emission from zinc, a mid-Z dopant. The Au L-shell and Zn K-shell spectra are taken simultaneously. The analysis of both sets of data exhibits good agreement with a singular rad-hydro model, suggesting a similar evolution in the mean electron temperature of the hohlraum plasma. These findings support the use of L-shell spectroscopy of gold as a method to study gold plasma conditions.

Emission spectroscopy↗
NASA NTRS1986

Convection electric field effects on outer radiation belt electron precipitation

A model is presented for the possible diurnal modulation of outer radiation belt electron precipitation by considering the effect of the convection electric field on geomagnetically trapped electrons. The modulation flux is the flux due to electrons in the drift loss cone, i.e., those which drift into the bounce loss cone. The electron flux in the drift loss cone is related to the time allowable for diffusion from the stably trapped population to the drift loss cone for precipitation at a specific geographic location. This time, which is termed the maximum L-shell lifetime, is obtained by computing electron trajectories, using a realistic magnetic field model and a simple model for the electric field. The maximum L-shell lifetimes are taken to be the times between successive entries into the bounce loss cone. Conservation of the first two adiabatic invariants, as electrons are slowly energized by the convection electric field, leads to variations in pitch angle, maximum L-shell lifetimes, and, consequently, to changes in the electron flux in the drift loss cone. These results are compared with observations of precipitating electrons made with sounding rocket payloads.

Gelpi, C.↗
NASA NTRS2006

Electron Impact Excitation Cross Section Measurement for n=3 to n=2 Line Emission in Fe(17+) to Fe(23+)

We have measured the electron impact excitation cross sections for the strong iron L-shell 3 --> 2 lines of Fe XVIII to Fe XXIV at the EBIT-I electron beam ion trap using a crystal spectrometer and NASA-Goddard Space Flight Centers 6 x 6 pixel array microcalorimeter. The cross sections were determined by direct normalization to the well established cross section of radiative electron capture through a sophisticated model analysis which results in the excitation cross section for the strong Fe L-shell lines at multiple electron energies. This measurement is part of a laboratory X-ray astrophysics program utilizing the Livermore electron beam ion traps EBIT-I and EBIT-II.

Chen, H.↗
DOE OSTI2020

Attosecond spectroscopy reveals alignment dependent core-hole dynamics in the ICl molecule

The removal of electrons located in the core shells of molecules creates transient states that live between a few femtoseconds to attoseconds. Owing to these short lifetimes, time-resolved studies of these states are challenging and complex molecular dynamics driven solely by electronic correlation are difficult to observe. Here, few-femtosecond core-excited state lifetimes of iodine monochloride are obtained by attosecond transient absorption on iodine 4d-16p transitions around 55 eV. Core-level ligand field splitting allows direct access of excited states aligned along and perpendicular to the ICl molecular axis. Lifetimes of 3.5 fs and 4.3 fs are obtained for core-hole states parallel to the bond and 6.5 fs and 6.9 fs for perpendicular states, while nuclear motion is essentially frozen on this timescale. Theory shows that the dramatic decrease of lifetime for core-vacancies parallel to the covalent bond is a manifestation of non-local interactions with the neighboring Cl atom of ICl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Multi-scale investigation of heterogeneous swift heavy ion tracks in stannate pyrochlore

Er 2 Sn 2 O 7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction (XRD), and neutron total scattering with pair distribution function (PDF) analysis. Each technique probes different aspects and length scales of the transformed material regions. TEM revealed a core–shell ion track structure—an amorphous core surrounded by a disordered, anion-deficient fluorite shell—which was confirmed by XRD. Neutron total scattering, with sensitivity to the oxygen sublattice, provided relative fractions of amorphous and disordered fluorite phases and confirmed the presence of a defective pyrochlore phase, which largely maintains its structural ordering but is clearly distinct from the pristine pyrochlore matrix. This defect-rich pyrochlore phase forms a halo extending radially beyond the well-characterized core–shell track morphology observed in electron micrographs. Despite their differing long-range periodicity, the short-range structures of the amorphous, disordered, and defective pyrochlore phases are all modeled well with a weberite-type configuration. Evolution of the phase fractions with increasing ion fluence was examined to ascertain the phase-to-phase pathways that occur during primary and secondary ion impact. Furthermore, this approach extends knowledge about the multi-scale response of stannate pyrochlores to swift heavy ion irradiation in the electronic energy loss regime and improves existing track-overlap models.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electron and ion spectroscopy of azobenzene in the valence and core shells

Azobenzene is a prototype and a building block of a class of molecules of extreme technological interest as molecular photo-switches. We present a joint experimental and theoretical study of its response to irradiation with light across the UV to x-ray spectrum. The study of valence and inner shell photo-ionization and excitation processes combined with measurement of valence photoelectron-photoion coincidence and mass spectra across the core thresholds provides a detailed insight into the site- and state-selected photo-induced processes. Photo-ionization and excitation measurements are interpreted via the multi-configurational restricted active space self-consistent field method corrected by second order perturbation theory. Using static modeling, we demonstrate that the carbon and nitrogen K edges of azobenzene are suitable candidates for exploring its photoinduced dynamics thanks to the transient signals appearing in background-free regions of the NEXAFS and XPS.

Chemistry↗
NASA NTRS2016

K-Shell Photoabsorption and Photoionisation of Trace Elements I. Isoelectronic Sequences With Electron Number 3< or = N < or = 11

Context. With the recent launching of the Hitomi X-ray space observatory, K lines and edges of chemical elements with low cosmic abundances, namely F, Na, P, Cl, K, Sc, Ti, V, Cr, Mn, Co, Cu and Zn, can be resolved and used to determine important properties of supernova remnants, galaxy clusters and accreting black holes and neutron stars.Aims. The second stage of the present ongoing project involves the computation of the accurate photoabsorption and photoionisation cross sections required to interpret the X-ray spectra of such trace elements.Methods. Depending on target complexity and computer tractability, ground-state cross sections are computed either with the close-coupling Breit-Pauli R-matrix method or with the autostructure atomic structure code in the isolated-resonance approximation. The intermediate-coupling scheme is used whenever possible. In order to determine a realistic K-edge behaviour for each species, both radiative and Auger dampings are taken into account, the latter being included in the R-matrix formalism by means of an optical potential.Results. Photoabsorption and total and partial photoionisation cross sections are reported for isoelectronic sequences with electron numbers 3< or = N< or = 11. The Na sequence (N=11) is used to estimate the contributions from configurations with a 2s hole (i.e. [2s]) and those containing 3d orbitals, which will be crucial when considering sequences with N 11.Conclusions. It is found that the [2s/u] configurations must be included in the target representations of species with N> 11 as they contribute significantly to the monotonic background of the cross section between the L and K edges. Configurations with 3d orbitals are important in rendering an accurate L edge, but they can be practically neglected in the K-edge region.

atomic data / X-rays: general↗
NASA NTRS2019

Measurements of L-shell X-ray Emission lines of Neonlike Europium on an Electron Beam Ion Trap

We report a measurement of the two X-ray transitions that proceed from the (1s22s22p51∕23d3∕2)J=1 and (1s22s1/22p63p1/2)J =1 upper levels to the (1s22s22p6)J =0 ground level in neonlike Eu53+ (Z = 63), that is, near the previously documented avoided crossing of the two upper levels at Z = 68. The measurement was carried out using the calorimeter spectrometer on the Livermore EBIT-I electron beam ion trap. It affirms the trends set by the neighboring neonlike ions both in terms of the relative intensity of the two lines and in terms of the magnitude of disagreement with theoretical energy level predictions.

Peter Beiersdorfer↗
DOE OSTI2022

How transient effects can change the inferred plasma temperatures when using K-shell sulfur line ratios in a time dependent iron sulfide plasma

This paper describes how the steady state atomic kinetics approximation can underestimate the electron temperature determined from K-shell lines in ps-time-scale transient plasmas. In particular, we model the temperature determination of solid FeS targets used in opacity experiments at the Orion laser facility from the ratio of sulfur He-α to Ly-α lines. Such experiments use short-pulse lasers to heat a thin microdot of FeS buried in a plastic target to temperatures of more than 1 keV and densities of approximately 1–2 g/cm 3 . Using atomic kinetics calculations based on a temperature history from a radiation hydrodynamic simulation of the target evolution, the peak temperature inferred from the sulfur line ratios is 1.29 keV at 3.1 ps as compared with the input peak temperature of 1.41 keV at 2.0 ps. There is a time lag of 1.2 ps at the peak, and an overall 0.5 ps time lag in the temporal history of the temperature as the plasma cools over the next 10 ps.

Rilloraza, Francisco↗
NASA NTRS1972

Artificial perturbations of the radiation belts

A review is given of the properties of the radiation belts which have been produced by high-altitude nuclear detonations. The low-yield, Argus devices, 1, 2, and 3, and the Soviet test of 1 November 1962 injected intense electron fluxes in narrow L-shell intervals, with peaks at L = 1.72, 2.11, 2.17, and 1.77, respectively. The energy spectra of the electrons were indistinguishable from the equilibrium fission beta spectrum, and the fluxes initially decayed at rates approximately proportional to (time) sup -1.1. The high-yield devices, Starfish and the Soviet tests of 22 October and 28 October 1962, injected electrons over wide ranges. At L values near the lower boundary, the electron spectra appeared to be softer at the higher L values.

Cladis, J. B.↗
DOE OSTI2024

Electronic structure analysis and DFT benchmarking of Rydberg-type alkali-metal-crown ether, -cryptand, and -adamanzane complexes

Density functional theory (DFT) and electron propagator theory (EPT) calculations were performed to study ground and excited electronic structures of alkali-metal (M) coordinated 9-crown-3, 24-crown-8, [2.1.1]cryptand, o-Me 2 -1.1.1, and 3 6 Adamanzane complexes. Each complex bears an expanded electron in the periphery and occupies diffuse 1p-, 1d-, 1f-type molecular orbitals (or superatomic 1P, 1D, 1F orbitals) in excited electronic states. The calculated superatomic shell model of the M(9-crown-3) 2 is 1S, 1P, 1D, 1F, 2S, 2P, 2D, 1G and it is held by all other complexes up to the studied 1F level. Due to the highly diffuse nature of the electron, the ionization energies of these complexes are significantly lower (1.6–2.0 eV) and hence these complexes belong to the superalkali category. Further, the ab initio EPT ionization energy and the excitation energies of the Li(9-crown-3) 2 were used to evaluate DFT errors associated with a series of exchange correlation functionals that span multiple rungs of Jacob's ladder (i.e., GGA, meta-GGA, global GGA hybrid, meta-GGA hybrid, range-separated hybrid, double-hybrid). Among these, the best performing functional is the range-separated hybrid CAM-B3LYP and the errors are within 6% of high-level ab initio EPT results. The accuracy of CAM-B3LYP is indeed transferable to similar complexes and hence the findings are expected to accelerate the progression of studies of Rydberg-type systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ab Initio Multiplet-Plus-Cumulant Approach for Correlation Effects in X-Ray Photoelectron Spectroscopy

The treatment of electronic correlations in open-shell systems is among the most challenging problems of condensed matter theory. Current approximations are only partly successful. Ligand-field multiplet theory has been widely successful in describing intra-atomic correlation effects in x-ray spectra, but typically ignores itinerant states. The cumulant expansion for the one-electron Green’s function has been successful in describing shake-up effects but ignores atomic multiplets. More complete methods, such as dynamic mean-field theory can be computationally demanding. Here, we show that separating the dynamic Coulomb interactions into local and longer-range parts with ab initio parameters yields a combined multiplet-plus-cumulant approach that accounts for both local atomic multiplets and satellite excitations. The approach is illustrated in transition metal oxides and explains the multiplet peaks, charge-transfer satellites, and distributed background features observed in XPS experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomic-scale in situ observation of electron beam and heat induced crystallization of Ge nanoparticles and transformation of Ag@Ge core-shell nanocrystals

Crystallization of amorphous materials by thermal annealing has been investigated for numerous applications in the fields of nanotechnology, such as thin-film transistors and thermoelectric devices. The phase transition and shape evolution of amorphous germanium (Ge) and Ag@Ge core–shell nanoparticles with average diameters of 10 and 12 nm, respectively, were investigated by high-energy electron beam irradiation and in situ heating within a transmission electron microscope. The transition of a single Ge amorphous nanoparticle to the crystalline diamond cubic structure at the atomic scale was clearly demonstrated. Depending on the heating temperature, a hollow Ge structure can be maintained or transformed into a solid Ge nanocrystal through a diffusive process during the amorphous to crystalline phase transition. Selected area diffraction patterns were obtained to confirm the crystallization process. In addition, the thermal stability of Ag@Ge core–shell nanoparticles with an average core of 7.4 and a 2.1 nm Ge shell was studied by applying the same beam conditions and temperatures. The results show that at a moderate temperature (e.g., 385 °C), the amorphous Ge shell can completely crystallize while maintaining the well-defined core–shell structure, while at a high temperature (e.g., 545 °C), the high thermal energy enables a freely diffusive process of both Ag and Ge atoms on the carbon support film and leads to transformation into a phase segregated Ag–Ge Janus nanoparticle with a clear interface between the Ag and Ge domains. In conclusion, this study provides a protocol as well as insight into the thermal stability and strain relief mechanism of complex nanostructures at the single nanoparticle level with atomic resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bioresorbable Primary Battery Anodes Built on Core–Double-Shell Zinc Microparticle Networks

Bioresorbable implantable electronics require power sources that are also bioresorbable with controllable electrical output and lifetime. In this paper, we report a bioresorbable zinc primary battery anode filament based on a zinc microparticle (MP) network coated with chitosan and Al 2 O 3 double shells. When discharged in 0.9% NaCl saline, a Zn MP filament with a 0.17 × 2 mm 2 cross-sectional area exhibited a stable voltage output of 0.55 V at a current of 0.01 mA. Covered by chitosan and Al 2 O 3 double shells, the zinc MP filament exhibited a directional dissolution behavior with a tunable lifetime approximately linear to its length. A stable 200 h discharging time was achieved with a 15 mm Zn MP filament. The maximum output power was found to be 12 μW at 0.03 mA for one filament. The linearity relationship between the current output and the filament cross-sectional area suggested a facile strategy to raise the power output at constant discharging voltage. The filaments could also be connected in series and in parallel to boost its overall voltage and current output, demonstrating their excellent integration capability. Furthermore, this work presents a promising pathway toward bioresorbable transient batteries with controllable lifetime and power output, demonstrating a great potential for powering transient implantable biomedical devices.

25 ENERGY STORAGE↗
NASA NTRS1994

Energy deposition and K-shell ionization of supernovae

We present explicit evaluation of K-shell ionization caused by photoelectric absorption, by Compton scattering, and by electron collisions in supernovae envelopes. Each process derives from the radioactivity that dominates the bolometric luminosity of the model supernovae. We include the ionization by bremsstrahlung. We find that electron-collision ionization with decelerating Compton electrons is the dominant process of K-shell ionization for light elements (lighter than Si) whereas photoelectric K-shell absorption of Comptonized gammas is the dominant process of K-shell ionization for heavy elements (like Fe). The relative importance of the ionization processes also depends upon composition and upon time, as well as upon supernova type. For Type Ia all four ionization sources are of importance. We present fitting formulas for the deposition of radioactive power in each class of models studied. The energy deposition of all mechanisms decreases with time, including the rate of K-shell ionizations of all elements throughout the supernovae model evaluated herein. We compare the relative contributions to the energy deposition and confirm with greater numerical detail results already established.

The, Lih-Sin↗
DOE OSTI2025

Long-Range Resonant Charge Transport through Open-Shell Donor–Acceptor Macromolecules

A grand challenge in molecular electronics is the development of molecular materials that can facilitate efficient longrange charge transport. Research spanning more than two decades has been fueled by the prospects of creating a new generation of miniaturized electronic technologies based on molecules whose synthetic tunability offers tailored electronic properties and functions unattainable with conventional electronic materials. However, current design paradigms produce molecules that exhibit off-resonant transport under low bias, which limits the conductance of molecular materials to unsatisfactorily low levels several orders of magnitude below the conductance quantum 1 G 0 and often results in an exponential decay in conductance with length. Here, we demonstrate a chemically robust, air-stable, and highly tunable molecular wire platform comprised of open-shell donor−acceptor macromolecules that exhibit remarkably high conductance close to 1 G 0 over a length surpassing 20 nm under low bias, with no discernible decay with length. Single-molecule transport measurements and ab initio calculations show that the ultralong-range resonant transport arises from extended π-conjugation, a narrow bandgap, and diradical character, which synergistically enables excellent alignment of frontier molecular orbitals with the electrode Fermi energy. The implementation of this long-sought-after transport regime within molecular materials offers new opportunities for the integration of manifold properties within emerging nanoelectronic technologies.

36 MATERIALS SCIENCE↗