Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Intensive Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Heteroepitaxial film crystal silicon on Al2O3 for solar cells on cube-textured metal foil

Crystal silicon is an excellent photovoltaic (PV) semiconductor: silicon is abundant, environmentally benign, capable of high solar conversion efficiencies, and profits from an unparalleled scientific knowledge base. However, the energy-intensive, inefficient and expensive processes that turn sand into a crystal silicon (c-Si) wafer account for more than half of today s Si PV module costs. Because the peak flux of solar energy on Earth is only about 1 kW/m2, large areas must be covered with inexpensive PV to provide for TW-scale electrical power needs. To circumvent the costly wafer fabrication step, it would be ideal to grow 2-20 micron thick PV-quality silicon absorber layers directly from silane gas onto inexpensive substrates at temperatures below 800 C.

14 SOLAR ENERGY↗

Current Status on the Manufacturing of Nanomaterials for Proton Exchange Membrane Energy Systems by Vapor-Based Processes

Development of novel technologies for catalyst synthesis and membrane electrode assembly (MEA) fabrication is of primary importance for further improvement of the performance and economics of proton exchange membrane fuel cells (PEMFCs) and proton exchange membrane water electrolyzers (PEMWEs). While the traditional manufacturing methods are time-consuming, energy intensive, and require many processing steps, the new vapor-based methods provide many benefits including the development of improved catalysts and catalyst supports, deposition of uniform thin films, reduction of catalyst loading, and minimizing the number of manufacturing steps. Recent publications in the field identified spray pyrolysis, reactive spray deposition technology, chemical vapor deposition, and atomic layer deposition as advanced vapor-based catalyst synthesis and deposition methods used for fabrication of MEAs for PEMFCs and PEMWEs. Here, the MEAs fabricated via vapor-based processes have shown significant performance improvements in comparison to the state-of-the-art MEAs, which are attributed to better catalyst distribution, improved catalyst supports, and controlled, uniform catalyst layer microstructures. This review provides an overview of the vapor-based synthesis and deposition methods currently being used for the development of PEM-based devices. The advantages and disadvantages of these methods are critically compared and discussed while the outlook for future development is provided.

25 ENERGY STORAGE↗

Understanding Variability To Reduce the Energy and GHG Footprints of U.S. Ethylene Production

Recent growth in U.S. ethylene production due to the shale gas boom is affecting the U.S. chemical industry's energy and greenhouse gas (GHG) emissions footprints. To evaluate these effects, a systematic, first-principles model of the cradle-to-gate ethylene production system was developed and applied. The variances associated with estimating the energy consumption and GHG emission intensities of U.S. ethylene production, both from conventional natural gas,and from shale gas, are explicitly analyzed. A sensitivity analysis illustrates that the large variances in energy intensity are due to process parameters (e.g., compressor efficiency), and that large variances in GHG emissions intensity are due to fugitive emissions from upstream natural gas production. On the basis of these results, the opportunities with the greatest leverage for reducing the energy and GHG footprints are presented. The model and analysis provide energy analysts and policy makers with a better understanding of the drivers of energy use and GHG emissions associated with U.S. ethylene production. They also constitute a rich data resource that can be used to evaluate options for managing the industry's footprints moving forward.

54 ENVIRONMENTAL SCIENCES↗

Manufacturing a 9-Meter Thermoplastic Composite Wind Turbine Blade: Preprint

Currently, wind turbine blades are manufactured from a combination of glass and/or carbon fiber composite materials with a thermoset resin such as epoxy, which requires energy-intensive and expensive heating processes to cure. Newly developed in-situ polymerizing thermoplastic resin systems for composite wind turbine blades polymerize at room temperature, eliminating the heating process and significantly reducing the blade manufacturing cycle time and embodied energy, which in turn reduces costs. Thermoplastic materials can also be thermally welded, eliminating the need for adhesive bonds between blade components and increasing the overall strength and reliability of the blades. As well, thermoplastic materials enable end-of-life blade recycling by reheating and decomposing the materials, which is a limitation of existing blade technology. This paper presents a manufacturing demonstration for a 9-m-long thermoplastic composite wind turbine blade. This blade was constructed in the Composites Manufacturing Education and Technology facility at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) using a vacuum-assisted resin transfer molding process. Johns Manville fiberglass and an Arkema thermoplastic resin called Elium were used. Additional materials included Armacell-recycled polyethylene terephthalate foam from Creative Foam and low-cost carbon- fiber pultruded spar caps (manufactured in collaboration with NREL, Oak Ridge National Laboratory, Huntsman, Strongwell, and Chomarat). This paper highlights the development of the thermoplastic resin formulations, including an additive designed to control the peak exothermic temperatures. Infusion and cure times of less than 3 hours are also demonstrated, highlighting the efficiency and energy savings associated with manufacturing thermoplastic composite blades.

17 WIND ENERGY↗

Monte Carlo Simulations Probing the Adsorptive Separation of Hydrogen Sulfide/Methane Mixtures Using All-Silica Zeolites

Selective removal of hydrogen sulfide (H 2 S) from sour natural gas mixtures is one of the key challenges facing the natural gas industry. Adsorption and pervaporation processes utilizing nanoporous materials, such as zeolites, can be alternatives to highly energy-intensive amine-based absorption processes. The adsorption behavior of binary mixtures containing H 2 S and methane (CH 4 ) in seven different all-silica zeolite frameworks (CHA, DDR, FER, IFR, MFI, MOR, and MWW) is investigated using Gibbs ensemble Monte Carlo simulations at two temperatures (298 and 343 K) and pressures ranging from 1 to 50 bar. The simulations demonstrate high selectivities that, with the exception of MOR, increase with increasing H 2 S concentration due to favorable sorbate–sorbate interactions. The simulations indicate significant inaccuracies of predictions using unary adsorption data and ideal adsorbed solution theory. In addition, the adsorption of binary H 2 S/H 2 O mixtures in MFI is considered to probe whether the presence of H 2 S induces coadsorption and reduces the hydrophobic character of all-silica zeolites. The simulations show preferential adsorption of H 2 S from moist gases with a selectivity of about 18 over H 2 O.

03 NATURAL GAS↗

Surface modification of cathode material enhances electrochemical performance in dry-processed Li-ion battery electrodes

The transition to electric vehicles (EVs) is pivotal for achieving energy security and integrating grid stability, with lithium-ion batteries (LIBs) playing a central role in this transformation. However, the conventional wet electrode manufacturing relying on N-methyl-2-pyrrolidone (NMP) solvent is energy intensive and costly. Dry processing (DP) has emerged as a promising alternative, eliminating solvents and using polytetrafluoroethylene (PTFE) binder for electrode fabrications. Despite its advantages, DP faces a critical challenge: poor interfacial adhesion between the hydrophobic PTFE binder and the hydrophilic cathode active material (CAM), particularly LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), which undermines electrode performance. Here, to address this, we introduced a novel vapor-phase trimethoxymethylsilane (TMMS) coating to hydrophobize the CAM surface, enhancing compatibility with PTFE. This surface modification significantly enhances binder – CAM interactions, enabling uniform mixing and robust electrode integrity without damaging the CAM particles. Our findings advance the feasibility of environmentally sustainable and cost-effective dry processing, representing a significant step toward sustainable battery manufacturing.

Choi, Junbin [Oak Ridge National Laboratory (ORNL)↗

Advanced Manufacturing for Thermal and Environmental Control Systems: Achieving National Energy Goals

This project was part of a regional initiative in the five counties of Central New York (CNY) that received funding from the U.S. Department of Energy (DOE) and four other federal agencies through the 2012 Advanced Manufacturing Jobs and Innovation Accelerator Challenge (AMJIAC). The CNY initiative was focused on cultivating the emergent regional cluster in “Advanced Manufacturing for Thermal and Environmental Control (AM-TEC).” As one component of the CNY AM-TEC initiative, the DOE-funded project supported five research & development seed projects that strategically targeted: 1) needs and opportunities of CNY AM-TEC companies, and 2) the goal of DOE’s Advanced Manufacturing Office (AMO) to reduce energy consumption by 50% across product life-cycles over 10 years. The project also sought to fulfill the AMO mission of developing and demonstrating new, energy-efficient processing and materials technologies at a scale adequate to prove their value to manufacturers and spur investment. The five seed projects demonstrated technologies and processes that can reduce energy intensity and improve production as well as use less energy throughout their lifecycles. The project was conducted over three years in two 18-month budget periods. During the first budget period, two projects proposed in the original AMJAIC application were successfully completed: Seed Project 1 focused on saving energy in heat transfer processes via development of nano structured surfaces to significantly increase heat flux; Seed Project 2 addressed saving energy in data centers via subzero cooling of the computing processors. Also during the first budget period, a process was developed and executed to select a second round of seed projects via a competitive request for proposals from regional companies and university collaborators. Applicants were encouraged to form industry-academic partnerships to leverage experience and resources of public and private sectors in the CNY region. Proposals were evaluated by a national panel of experts. Three projects were selected for awards and were completed successfully during the second budget period: Seed Project 3 focused on enabling self-powered furnaces to permit residents to shelter in place during power outages; Seed Project 4 addressed development of a novel method of controlling air conditioning systems that could enable flexible load matching in market segments not possible with existing technologies; and Seed Project 5 focused on the creation of smarter occupancy sensors to enable effective highly localized demand based ventilation.

30 DIRECT ENERGY CONVERSION↗

Editorial: Future perspectives on separation technologies

Sustainable separation process development is crucial in promoting economic and environmental sustainability. Separation processes can be energy-intensive, and early-stage or emerging separation technologies can also be costly. For instance, separations in biomass-based fuels and chemicals production can account for up to 50% of the production cost, while industrial separations can consume up to 15% of the total energy used in the United States. Separations are essential to many industrial processes and play a crucial role in helping industry achieve several United Nations sustainable development goals (SDG), such as clean energy, responsible production, and climate change mitigation. Therefore, it is imperative to have a comprehensive discussion within the scientific community to identify innovative approaches for sustainable separation processes. This editorial highlights the key insights and research findings presented in this research topic titled "Future Perspectives on Separation Technologies."

42 ENGINEERING↗

Alternative Fuel Source Study-An Energy Efficient and Environmentally Friendly Approach (Final Technical Report)

The objective of this project is to conduct research to determine the feasibility of using alternate fuel sources for the production of cement. Successful completion of this project will also be beneficial to other commercial processes that are highly energy intensive. During this report period, we have completed all the subtasks in the preliminary survey. Literature searches focused on the types of alternative fuels currently used in the cement industry around the world. Information was obtained on the effects of particular alternative fuels on the clinker/cement product and on cement plant emissions. Federal regulations involving use of waste fuels were examined. Information was also obtained about the trace elements likely to be found in alternative fuels, coal, and raw feeds, as well as the effects of various trace elements introduced into system at the feed or fuel stage on the kiln process, the clinker/cement product, and concrete made from the cement. The experimental part of this project involves the feasibility of a variety of alternative materials mainly commercial wastes to substitute for coal in an industrial cement kiln in Lafarge NA and validation of the experimental results with energy conversion consideration.

09 BIOMASS FUELS↗

Wide-Area Thermal Processing of Light-Emitting Materials

Silicon carbide based materials and devices have been successfully exploited for diverse electronic applications. However, they have not achieved the same success as Si technologies due to higher material cost and higher processing temperatures required for device development. Traditionally, SiC is not considered for optoelectronic applications because it has an indirect bandgap. However, AppliCote Associates, LLC has developed a laser-based doping process which enables light emission in SiC through the creation of embedded p-n junctions. AppliCote laser irradiation of silicon carbide allows two different interaction mechanisms: (1) Laser conversion or induced phase transformation which creates carbon rich regions that have conductive properties. These conductive regions are required for interconnection to the light emitting semiconducting region. (2) Laser doping which injects external dopant atoms into the substrate that introduces deep level transition states that emit light when electrically excited. The current collaboration with AppliCote has focused on the evaluation of ORNL's unique Pulse Thermal Processing (PTP) technique as a replacement for laser processing. Compared to laser processing, Pulse Thermal Processing can deliver similar energy intensities (20-50 kW/cm2) over a much larger area (up to 1,000 cm2) at a lower cost and much higher throughput. The main findings of our investigation; which are significant for the realization of SiC based optoelectronic devices, are as follows: (1) The PTP technique is effective in low thermal budget activation of dopants in SiC similar to the laser technique. The surface electrical conductivity of the SiC samples improved by about three orders of magnitude as a result of PTP processing which is significant for charge injection in the devices; (2) The surface composition of the SiC film can be modified by the PTP technique to create a carbon-rich surface (increased local C:Si ratio from 1:1 to 2.9:1). This is significant as higher thermal and electrical conductivities of the surface layer are critical for a successful development of integrated optoelectronic devices; and (3) PTP provides low thermal budget dopant activation with a controlled depth profile, which can be exploited for high performance device development with selective patterning of the substrate. This project has successfully demonstrated that a low thermal budget annealing technique, such as PTP, is critical to defining the path for low cost electronic devices integrated on glass or polymeric substrates. This project is complimentary to the goals of the Solid State Lighting Program within DOE. It involves new manufacturing techniques for light emitting materials that are potentially much lower cost and energy efficient than existing products. Significant opportunity exists for further exploration of AppliCote's material and device technology in combination with ORNL's PTP technique, modeling, and characterization capabilities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Catalytic Graphitization of Biocarbon for Lithium‐Ion Anodes: A Minireview

Abstract The demand for electrochemical energy storage is increasing rapidly due to a combination of decreasing costs in renewable electricity, governmental policies promoting electrification, and a desire by the public to decrease CO 2 emissions. Lithium‐ion batteries are the leading form of electrochemical energy storage for electric vehicles and the electrical grid. Lithium‐ion cell anodes are mostly made of graphite, which is derived from geographically constrained, non‐renewable resources using energy‐intensive and highly polluting processes. Thus, there is a desire to innovate technologies that utilize abundant, affordable, and renewable carbonaceous materials for the sustainable production of graphite anodes under relatively mild process conditions. This review highlights novel attempts to realize the aforementioned benefits through innovative technologies that convert biocarbon resources, including lignocellulose, into high quality graphite for use in lithium‐ion anodes.

25 ENERGY STORAGE↗

Elementary kinetics of nitrogen electroreduction on Fe surfaces

Electrochemical ammonia synthesis could provide a sustainable and efficient alternative to the energy intensive Haber-Bosch process. Development of an active and selective N 2 electroreduction catalyst requires mechanism determination to aid in connecting catalyst composition and structure to performance. Density functional theory calculations are used to examine the elementary step energetics of associative N 2 reduction mechanisms on two low index Fe surfaces. Interfacial water molecules in the Heyrovsky-like mechanism help lower some of the elementary activation barriers. Electrode potential dependent barriers show that cathodic potentials below -1.5 V-RHE are necessary to give a significant rate of N 2 electroreduction. DFT barriers suggest a larger overpotential than expected based on elementary reaction free energies. Linear Brønsted-Evans-Polanyi relationships do not hold across N–H formation steps on these surfaces, further confirming that explicit barriers should be considered in DFT studies of the nitrogen reduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioethanol enrichment using zeolite membranes: Molecular modeling, conceptual process design and techno-economic analysis

Lignocellulosic biomass-derived ethanol offers a potential alternative to fossil-derived fuels. However, the energy-intensive nature of its recovery process, i.e., a sequence of two distillation columns – beer and rectification columns - enriching from 5 to 37, and 37–93 wt%, respectively, limits its environmental and economic benefits. Here, in this paper, we assess the potential of using zeolite membranes for bioethanol recovery. Atomistic-level and molecular dynamic simulations are performed to determine adsorption and diffusion properties of the ethanol-water mixture in zeolite membranes. These properties are modeled using the real adsorption solution theory and the Maxwell-Stefan equations to describe permeation through the zeolite membranes. A comparison of steady state permeance and selectivity predicted by the model with the values from experiments suggests that the simulated membranes are more permeable and selective than the real membranes. This is attributed to the presence of structural non-idealities and hydrophilic defects in real membranes, while the adsorption and diffusion properties obtained using molecular simulations reflect the behavior in ideal crystals. Thus, a reduced diffusivity model with an empirical relation for enhanced water adsorption is used to capture similar performance as that obtained by real membranes. This model is further used in developing conceptual process designs to assess the viability of zeolite membranes for bioethanol enrichment in industry. Both hydrophobic and hydrophilic zeolite membranes are considered. Hydrophobic zeolite membranes show potential for energy savings but lack in separation performance. On the other hand, hydrophilic zeolite membranes can achieve the separation target but result in no energy savings. Thus, a configuration that uses a combination of hydrophobic and hydrophilic membranes is proposed. It can achieve the separation target and results in 15% energy savings over distillation. Techno-economic analysis suggests that ~ 10-fold improvements in permeation or equivalent cost reductions are required for economic viability of this scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interconnected nanoconfining pore networks enhance catalyst CO 2 interaction in electrified reactive capture

Systems that sequentially capture and upgrade CO 2 from air to fuels/fuel-intermediates, such as syngas and ethylene, rely on an energy-intensive CO 2 release process. Electrified reactive capture systems transform CO 2 obtained directly from carbonate capture liquid into products. Previous reactive capture systems show a decline in Faradaic efficiencies (FE) at current densities above 200 mA/cm 2 . Here we show the chemical origins of this problem, finding that prior electrocatalyst designs failed to arrest, activate, and reduce in situ-generated CO 2 (i-CO 2 ) before it traversed the catalyst layer and entered the tailgas stream. We develop a templated synthesis to define pore structures and the sites of Ni single atoms, and find that carbon-nitrogen-based nanopores are effective in accumulating i-CO 2 via short-range, non-electrostatic interactions between CO 2 molecules and the nanochannel walls. These interactions confine and enrich i-CO 2 within the pores, enhancing its binding and activation. We report as a result carbonate electrolysis at 300 mA/cm 2 with FE to CO of 50% ± 3%, and with <1% CO 2 in the tailgas outlet stream. This corresponds to a projected energy efficiency (EE) to 2:1 syngas of 46% at 300 mA/cm 2 when H 2 is added using a water electrolyzer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing Nitrogen Activation in Electrochemical Reduction: The Role of Rare Earth Oxide Surface Configurations

The pursuit of sustainable ammonia synthesis has prompted the exploration of ambient electrochemical nitrogen reduction reaction (e-NRR) as an alternative to the energy-intensive Haber-Bosch process. Here, this study conducted a theoretical investigation into the use of rare earth oxide materials, specifically dysprosium oxide (Dy 2 O 3 ), as potential electrocatalysts for NRR. Utilizing spin-polarized density functional theory calculations, we explored the interaction between Dy 2 O 3 surfaces and nitrogen (N 2 ) molecules, examining the capability of Dy 2 O 3 to adsorb and activate N 2 under ambient conditions. The results indicate that Dy 2 O 3 surfaces exhibit diverse configurations and bonding environments, providing a variety of reactive sites that display different behaviors in N 2 adsorption and activation. The distinctive electronic structure and surface chemistry of a particular Dy 2 O 3 surface configuration were found to significantly enhance the activation of N 2 by promoting charge transfer, which facilitates the NRR process. This research provides deep insights into the mechanistic pathways of N 2 reduction over Dy 2 O 3 , highlighting the surface properties as pivotal in catalysis. These theoretical insights serve as a foundation for the development of novel rare earth-based electrocatalytic materials for efficient ambient e-NRR, potentially transforming ammonia production into a greener and more energy-efficient process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Intrinsically Conductive {pi}‑d Conjugated Layers with Co–N4 Active Sites for Efficient Nitrate Electrocatalysis and Zinc-Nitrate Batteries

Electrochemical synthesis of ammonia from nitrate has been extensively investigated as a potential alternative to the energy-intensive Haber-Bosch process. This approach not only operates under ambient conditions but also simultaneously removes nitrate contaminants while producing ammonia as a value-added product. However, the ongoing quest lies in designing an efficient electrocatalyst that achieves a high ammonia yield rate, high selectivity, and long-term stability. Herein, we report the outstanding performance of a Co–N4 coordinated π-d layered Co3(HITP)2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) in nitrate electrocatalysis. The unique combination of abundant Co–N4 active sites and superior electrical conductivity enables significant electrocatalytic activity, delivering a maximum ammonia yield rate of 56.8 mg cm–2 h–1 at −0.8 V vs RHE and a Faradaic efficiency of ∼91% at −0.4 V vs RHE. Mechanistic analysis reveals that alkaline conditions accelerate water dissociation to generate adsorbed hydrogen intermediates (H*), which are utilized by Co–N4 sites to drive the stepwise hydrogenation of nitrate to ammonia while suppressing competing hydrogen evolution reaction (HER) pathways. Furthermore, integration of this catalyst into a zinc-nitrate battery resulted in a maximum power density of 5.3 mW cm–2 and an open-circuit potential of ∼1.45 V. These results highlight the potential of π-d conjugated Co–N4 materials as an efficient catalyst for both environmental remediation and energy conversion.

Namvar, shahrirar↗

Generalizable Porous Aromatic Framework‐Included Polymer Membranes for Diffusion‐Enhanced Gas Separations

Industrial separation processes account for 10-15% of global energy consumption. Membrane-based processes are less energy-intensive than traditional gas separation technologies; however, enhanced material separation performance and stability for numerous gas mixtures are needed for widespread industrial adoption. This work presents a generalizable strategy for preparing mixed-matrix gas separation membranes exceeding the performance upper bounds of existing polymer membranes for a wide variety of industrial gases. By incorporating robust porous aromatic framework (PAF) particles into various dense commercial polymer matrices, gas diffusivity and solubility can be enhanced. For diverse gas mixtures (e.g., CO2/N2, O2/N2, He/CH4, H2/N2, and C2H4/C2H6), the resulting composite membranes exhibit enhanced gas permeabilities-by as much as 520%-and largely unchanged selectivities even after 6 years of aging under simulated flue gas conditions. These improvements arise from the ultrahigh porosity, excellent chemical compatibility, and unique physicochemical properties of the embedded PAF particles. Functionalizing the PAFs with polyamines also enables composite membranes that achieve among the highest reported performances against plasticization, a common obstacle in commercializing gas separation membranes. Significantly, the PAF-1 particles are readily dispersible in various common membrane casting solvents, suggesting their broader utility as a filler for designing high-performance membranes for many industrial gas separations.

Uliana, Adam A↗

Identifying Optimal Zeolitic Sorbents for Sweetening of Highly Sour Natural Gas

Abstract Raw natural gas is a complex mixture comprising methane, ethane, other hydrocarbons, hydrogen sulfide, carbon dioxide, nitrogen, and water. For sour gas fields, selective and energy‐efficient removal of H 2 S is one of the crucial challenges facing the natural‐gas industry. Separation using nanoporous materials, such as zeolites, can be an alternative to energy‐intensive amine‐based absorption processes. Herein, the adsorption of binary H 2 S/CH 4 and H 2 S/C 2 H 6 mixtures in the all‐silica forms of 386 zeolitic frameworks is investigated using Monte Carlo simulations. Adsorption of a five‐component mixture is utilized to evaluate the performance of the 16 most promising materials under close‐to‐real conditions. It is found that depending on the fractions of CH 4 , C 2 H 6 , and CO 2 , different sorbents allow for optimal H 2 S removal and hydrocarbon recovery.

Shah, Mansi S.↗