Search NASA⌕ Search

SEARCH · Search NASA

Results for “Epitaxial strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High Efficiency Inverted GaAs and GaInP/GaAs Solar Cells With Strain-Balanced GaInAs/GaAsP Quantum Wells

High-efficiency solar cells are essential for high-density terrestrial applications, as well as space and potentially vehicle applications. The optimum bandgap for the terrestrial spectrum lies beyond the absorption range of a traditional dual junction GaInP/GaAs cell, with the bottom GaAs cell having higher bandgap energy than necessary. Lower energy bandgaps can be achieved with multiple quantum wells (QWs), but such a pathway requires advanced management of the epitaxial growth conditions in order to be useful. Strain-balanced GaAsP/GaInAs QWs are incorporated into a single junction GaAs solar cell and a dual junction GaInP/GaAs solar cell, leading to 27.2% efficiency in the single junction device and a one-sun record 32.9% efficiency in the tandem device. Good carrier collection and low non-radiative recombination are observed in the cells with up to 80 QWs. The GaAs cells employ a rear-heterojunction architecture to boost the open-circuit voltage to over 1.04 V in the quantum well device, despite the large number of QWs.

14 SOLAR ENERGY↗
DOE OSTI2021

Asymmetric ferroelectricity by design in atomic-layer superlattices with broken inversion symmetry

In atomic-layer superlattices constructed using three constituent phases, CaTiO 3 , SrTiO 3 , and BaTiO 3 , the stacking sequence of the atomic layers is found to control the symmetry of the high-temperature dielectric response. In such a superlattice when a nanostructured asymmetric strain is programmed into the lattice via the stacking order, the natural symmetry at high temperatures is removed and a polarized sample is obtained in which the polarization increases as the temperature is lowered. Here, in contrast to a ferroelectric characterized by a bistable ground state with two equal and opposite electronic polarizations, our experiments show evidence of asymmetric ferroelectric correlations that set in when such a sample becomes hysteretic below a temperature T x , with two unequal polarization states. We further show that both the magnitude and direction of this ferroelectric asymmetry can be controlled by the engineered atomic-layer stacking order and periodicity of the superlattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Study of InGaAs-based modulation doped field effect transistor structures using variable-angle spectroscopic ellipsometry

Variable-angle spectroscopic ellipsometry was used to estimate the thicknesses of all layers within the optical penetration depth of InGaAs-based modulation doped field effect transistor structures. Strained and unstrained InGaAs channels were made by molecular beam epitaxy (MBE) on InP substrates and by metal organic chemical vapor deposition on GaAs substrates. In most cases, ellipsometrically determined thicknesses were within 10 percent of the growth-calibration results. The MBE-made InGaAs strained layers showed large strain effects, indicating a probable shift in the critical point of their dielectric function toward the InP lattice-matched concentration.

Alterovitz, Samuel A.↗
NASA NTRS1991

Study of InGaAs-based modulation doped field effect transistor structures using variable-angle spectroscopic ellipsometry

Variable-angle spectroscopic ellipsometry was used to estimate the thicknesses of all layers within the optical penetration depth of InGaAs-based modulation doped field effect transistor structures. Strained and unstrained InGaAs channels were made by molecular beam epitaxy (MBE) on InP substrates and by metal-organic chemical vapor deposition on GaAs substrates. In most cases, ellipsometrically determined thicknesses were within 10% of the growth-calibration results. The MBE-made InGaAs strained layers showed large strain effects, indicating a probable shift in the critical points of their dielectric function toward the InP lattice-matched concentration.

Alterovitz, S. A.↗
DOE OSTI2022

DEVELOPMENT OF HIGH QUANTUM EFFICIENCY STRAINED SUPERLATTICE SPIN POLARIZED PHOTOCATHODES VIA METAL ORGANIC CHEMICAL VAPOR DEPOSITION

Spin polarized photocathodes are necessary to examine parity violations and other fundamental phenomena in the field of high energy physics. To create these devices, expensive and complicated growth processes are necessary. While integral to accelerator physics, spin polarized electrons could have other exciting applications in materials science and other fields of physics. In order to explore these other applications feasibly, the relative supply of spin polarized photocathodes with a high rate of both polarization and photoemission needs to be increased. One such way to increase this supply is to develop the means to grow them faster and at a larger scale. Because most photocathodes are grown in slow, small-scale processes like Molecular Beam Epitaxy, an alternative needed to be found. In the following work, strained superlattice photocathodes were fabricated using metal organic vapor phase epitaxy. Using this growth process, we demonstrated that it is possible to create high quality photocathodes at a higher rate while maintaining a high quality of polarization and quantum efficiency, thus allowing for the exploration of other applications for these devices.

Belfore, Benjamin↗
DOE OSTI2024

Origins of enhanced oxygen reduction activity of transition metal nitrides

Transition metal nitride (TMN-) based materials have recently emerged as promising non-precious-metal-containing electrocatalysts for the oxygen reduction reaction (ORR) in alkaline media. However, the lack of fundamental understanding of the oxide surface has limited insights into structure–(re)activity relationships and rational catalyst design. Here, in this work, we demonstrate how a well-defined TMN can dictate/control the as-formed oxide surface and the resulting ORR electrocatalytic activity. Structural characterization of MnN nanocuboids revealed that an electrocatalytically active Mn 3 O 4 shell grew epitaxially on the MnN core, with an expansive strain along the [010] direction to the surface Mn 3 O 4 . The strained Mn 3 O 4 shell on the MnN core exhibited an intrinsic activity that was over 300% higher than that of pure Mn 3 O 4 . A combined electrochemical and computational investigation indicated/suggested that the enhancement probably originates from a more hydroxylated oxide surface resulting from the expansive strain. This work establishes a clear and definitive atomistic picture of the nitride/oxide interface and provides a comprehensive mechanistic understanding of the structure–reactivity relationship in TMNs, critical for other catalytic interfaces for different electrochemical processes.

electrocatalysis↗
DOE OSTI2021

Symmetry mismatch controlled ferroelastic domain ordering and the functional properties of manganite films on cubic miscut substrates

We have studied the magnetotransport properties and strain release mechanisms in ferroelastic La 0.9 Sr 0.1 MnO 3 (LSMO) epitaxial thin films on SrTiO 3 (STO)(001) substrates with different miscut angles. The substrate miscut angle plays a critical role in releasing shear strain and has a huge impact on the properties of the films. The strain relaxes by monoclinic distortion for films on low miscut substrates and for higher miscut substrates, the strain relaxation causes the formation of periodic twin domains with larger periodicities. Furthermore, we observe that the Curie temperature (T C ) decreases systematically, and magnetoresistance (MR) increases with increasing the miscut angle. Such changes in the magnetic and transport properties could be due to the increased density of phase boundaries (PBs) with the increase of miscut angle. This work provides a way to tailor film microstructures and subsequent functional properties of other complex oxide films on miscut substrates with symmetry mismatch.

36 MATERIALS SCIENCE↗
DOE OSTI2023

GaAs-based superlattice photocathodes manufactured using MOCVD provide spin polarization > 90% and quantum efficiency > 1%

Spin-polarized electron beams are important for nuclear physics research performed at electron accelerators. Over many years, beam polarization has increased significantly, from 35% provided by unstrained bulk GaAs, to ~ 75% using single strained-layer GaAs, to ~ 90% using strained-superlattice GaAs photocathodes grown using molecular beam epitaxy (MBE). Commercial vendors once provided high-polarization photocathodes but today there is little interest in supporting this small market. Here, we report successful results fabricating high polarization GaAs/GaAsP superlattice photocathodes using metal organic chemical vapor deposition (MOCVD), a method dismissed by some as not providing sufficient control of layer thickness and uniformity. The best samples provide spin polarization greater than 90% and quantum efficiency (QE) exceeding 2%, with QE enhanced using a distributed Bragg reflector (DBR) incorporated into the structure. Together, these quantities represent some of the best results ever reported for high polarization photocathodes. Enhanced QE via DRB is very important for future work at CEBAF/Jefferson Lab because it will simplify the production of polarized electron beams at milliampere current needed for a polarized positron source.

Poelker, Matt↗
NASA NTRS1988

Extremely low resistance nonalloyed ohmic contacts on GaAs using InAs/InGaAs and InAs/GaAs strained-layer superlattices

Employing a structure consisting of n(+)-InAs/InGaAs and InAs/GaAs strained-layer superlattices (SLSs) grown by molecular beam epitaxy on GaAs films, nonalloyed contact resistances less than 8.5 x 10 to the -8th ohm sq cm have been obtained. Self-consistent simulations show that these extremely small nonalloyed contact resistances are due to the suppression of the depletion depth in the GaAs channel and tunneling through the SLS layer. Similar structures on InGaAs channels have led to nonalloyed specific contact resistances of about 1.5 x 10 to the -8th ohm sq cm. These results represent the smallest figures reported for these important material systems.

Peng, C. K.↗
NASA NTRS1992

Raman scattering of InGaAs/InP grown by uniform radial flow epitaxy

Uniform radial flow epitaxy, a novel growth technique, has been used to grown InGaAs films on InP. Epitaxial layers above and below the critical thickness for the onset of slip were grown. Raman spectroscopy was used to characterize the quality of epitaxial layers, determine alloy composition, and measure the strain. Raman spectra from both pseudomorphic (strained) and relaxed (unstrained) InGaAs films were obtained at 300 and 80 K. The difference in the frequencies of their GaAs-like longitudinal optical phonons was used to calculate stress for the strained InGaAs/InP, leading to a direct formula for the evaluation of the layer stress.

Feng, Z. C.↗
DOE OSTI2021

Molecular beam epitaxy of PdO on MgO (001)

PdO, widely used in catalysis in powder form for decades, has been predicted recently to be a Dirac semimetal. Synthesis of high-quality single crystals of this material is thus of great interest. Here, by using ozone-assisted molecular beam epitaxy, PdO thin films were grown on a MgO (001) substrate. X-ray diffraction and transmission electron microscopy indicate the film is a / b axis oriented, with the c axis lying in plane. Fully oxygenated PdO films have a low density of holelike carriers, and are insulating at the lowest temperatures. Our density functional theory calculations using the Heyd-Scuseria-Ernzerhof exchange-correlation functional suggest a ~1.0 eV band gap at the M point, where the gap can be reduced by tensile strain along the c axis and the bands begin to invert when the tensile strain is as high as 18%. Although tensile strain of this magnitude is experimentally not viable using epitaxy, electrons can be doped by oxygen reduction. Finally, our results emphasize the need for careful consideration of electron correlation effects and stoichiometry in ab initio modeling of topological semimetals involving transition metal oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Beyond Substrates: Strain Engineering of Ferroelectric Membranes

Strain engineering in perovskite oxides provides for dramatic control over material structure, phase, and properties, but is restricted by the discrete strain states produced by available high-quality substrates. Here, using the ferroelectric BaTiO3, production of precisely strain-engineered, substrate-released nanoscale membranes is demonstrated via an epitaxial lift-off process that allows the high crystalline quality of films grown on substrates to be replicated. In turn, fine structural tuning is achieved using interlayer stress in symmetric trilayer oxide-metal/ferroelectric/oxide-metal structures fabricated from the released membranes. Additionally, in devices integrated on silicon, the interlayer stress provides deterministic control of ordering temperature (from 75 to 425 °C) and releasing the substrate clamping is shown to dramatically impact ferroelectric switching and domain dynamics (including reducing coercive fields to <10 kV cm-1 and improving switching times to <5 ns for a 20 µm diameter capacitor in a 100-nm-thick film). In devices integrated on flexible polymers, enhanced room-temperature dielectric permittivity with large mechanical tunability (a 90% change upon ±0.1% strain application) is demonstrated. This approach paves the way toward the fabrication of ultrafast CMOS-compatible ferroelectric memories and ultrasensitive flexible nanosensor devices, and it may also be leveraged for the stabilization of novel phases and functionalities not achievable via direct epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Strain Recovery and Defect Characterization in Mg‐Implanted Homoepitaxial GaN on High‐Quality GaN Substrates

The evolution of defects due to high‐pressure annealing of magnesium ion‐implanted epitaxial GaN grown on high‐quality GaN substrates is investigated. Changes in the implant‐induced strain are quantified as a function of annealing temperature and time. After annealing at 1300 °C for 10 min, the implant‐induced strain is fully relieved and accompanied by the presence of extended defects such as basal plane stacking faults and prismatic loops. Approximately one‐third of the original implant‐induced strain remains after annealing at 700 °C, and 5% of the original strain remains at 1000 °C for 100 min. In all cases, nearly all of the recovered strain occurs within first few minutes of annealing. A prominent increase in the asymmetric (104) triple axis X‐ray rocking curve full width at 0.01 maximum (FW0.01M) is observed after annealing at 1300 °C for 10 min. After annealing at 1300 °C for 100 min, a subsequent decrease in FW0.01M is correlated with a reduction of the extended defect density from 4 × 10 8 to 3 × 10 7 cm −2 , determined through transmission electron microscope (TEM) measurements. Further reduction in the density of the extended defects by optimizing annealing temperature and time is expected to improve the performance of GaN‐based vertical power devices.

Wang, Yekan↗
DOE OSTI2024

Control of Quantized Spontaneous Emission from Single GaAs Quantum Dots Embedded in Huygens’ Metasurfaces

Advancements in photonic quantum information systems (QIS) have driven the development of high-brightness, on-demand, and indistinguishable semiconductor epitaxial quantum dots (QDs) as single photon sources. Strain-free, monodisperse, and spatially sparse local-droplet-etched (LDE) QDs have recently been demonstrated as a superior alternative to traditional Stranski–Krastanov QDs. However, integration of LDE QDs into nanophotonic architectures with the ability to scale to many interacting QDs is yet to be demonstrated. Here, we present a potential solution by embedding isolated LDE GaAs QDs within an Al 0.4 Ga 0.6 As Huygens’ metasurface with spectrally overlapping fundamental electric and magnetic dipolar resonances. We demonstrate for the first time a position- and size-independent, 1 order of magnitude increase in the collection efficiency and emission lifetime control for single-photon emission from LDE QDs embedded within the Huygens’ metasurfaces. Our results represent a significant step toward leveraging the advantages of LDE QDs within nanophotonic architectures to meet the scalability demands of photonic QIS.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Toward AlGaN channel HEMTs on AlN: Polarization-induced 2DEGs in AlN/AlGaN/AlN heterostructures

Due to its high breakdown electric field, the ultra-wide bandgap semiconductor AlGaN has garnered much attention recently as a promising channel material for next-generation high electron mobility transistors (HEMTs). A comprehensive experimental study of the effects of Al composition x on the transport and structural properties is lacking. We report the charge control and transport properties of polarization-induced 2D electron gases (2DEGs) in strained AlGaN quantum well channels in molecular-beam-epitaxy-grown AlN/Al x Ga 1-x N/AlN double heterostructures by systematically varying the Al content from x = 0 (GaN) to x = 0.74, spanning energy bandgaps of the conducting HEMT channels from 3.49 to 4.9 eV measured by photoluminescence. This results in a tunable 2DEG density from 0 to 3.7 × 10 13 cm 2 . The room temperature mobilities of x ≥ 0.25 AlGaN channel HEMTs were limited by alloy disorder scattering to below 50 cm 2 /(V.s) for these 2DEG densities, leaving ample room for further heterostructure design improvements to boost mobilities. A characteristic alloy fluctuation energy of ≥1.8 eV for electron scattering in AlGaN alloy is estimated based on the temperature dependent electron transport experiments.

36 MATERIALS SCIENCE↗
NASA NTRS2015

Nanowire Photovoltaic Devices

Firefly Technologies, in collaboration with the Rochester Institute of Technology and the University of Wisconsin-Madison, developed synthesis methods for highly strained nanowires. Two synthesis routes resulted in successful nanowire epitaxy: direct nucleation and growth on the substrate and a novel selective-epitaxy route based on nanolithography using diblock copolymers. The indium-arsenide (InAs) nanowires are implemented in situ within the epitaxy environment-a significant innovation relative to conventional semiconductor nanowire generation using ex situ gold nanoparticles. The introduction of these nanoscale features may enable an intermediate band solar cell while simultaneously increasing the effective absorption volume that can otherwise limit short-circuit current generated by thin quantized layers. The use of nanowires for photovoltaics decouples the absorption process from the current extraction process by virtue of the high aspect ratio. While no functional solar cells resulted from this effort, considerable fundamental understanding of the nanowire epitaxy kinetics and nanopatterning process was developed. This approach could, in principle, be an enabling technology for heterointegration of dissimilar materials. The technology also is applicable to virtual substrates. Incorporating nanowires onto a recrystallized germanium/metal foil substrate would potentially solve the problem of grain boundary shunting of generated carriers by restricting the cross-sectional area of the nanowire (tens of nanometers in diameter) to sizes smaller than the recrystallized grains (0.5 to 1 micron(exp 2).

Forbes, David↗
DOE OSTI2020

Unusual electrical conductivity driven by localized stoichiometry modification at vertical epitaxial interfaces

Precise control of lattice mismatch accommodation and interfacial cation diffusion is critical to modulate correlated functionalities in epitaxial heterostructures, particularly when the interface composition is positioned near a compositional phase transition boundary. Here we select La 1-x Sr x MnO 3 (LSMO) as a prototype phase transition oxide and establish vertical epitaxial interfaces with NiO for exploring the strong interplay between strain accommodation, stoichiometry modification, and localized electron transport across the interface. It is found that localized stoichiometry modification overcomes the dead layer problem plaguing LSMO and leads to strongly directional conductivity, as manifested by a more than three orders of magnitude difference between out-of-plane and in-plane conductivity. Comprehensive atomic scale structural characterization and transport measurements reveal that this emerging behavior is created by a compositional change produced by preferential cation diffusion that pushes the LSMO phase transition from insulating into metallic within an ultrathin interface region. This study explores the nature of unusual electrical conductivity at vertical epitaxial interfaces and highlights the beneficial role of controllable cation diffusion that enables emerging functionalities for a broad range of potential applications such as memristors, spintronic devices, and novel nanoelectronic devices using strongly correlated materials.

36 MATERIALS SCIENCE↗