Search NASA⌕ Search

SEARCH · Search NASA

Results for “Epitaxial strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Residual stress and microstructure in IN718-René41 graded superalloy fabricated by laser blown directed energy deposition

Additively printed Ni-based superalloy with a compositionally graded transition from IN718 to René41 was fabricated by laser blown-powder directed energy deposition (DED/LB-M), with the goals of meeting location-specific temperature capability and reducing component cost for hot gas path turbine components. Residual stress distribution in thin wall specimens with three sets of DED build parameters in the as-built and stress-relieved states was measured by neutron diffraction. For calculating residual stress, the calculated d0 method was found to be more appropriate as stress-free reference than using the lattice spacing measured from the stress-relief heat treated specimens. Longer dwell time (lower interpass temperature), higher energy input, smaller layer thickness resulted in a higher magnitude of tensile residual stresses at edges and compressive residual stresses at center of the specimens. The residual stress results did not show a strong dependence on graded compositions, indicating that the residual stress build-up was more geometry and process dependent. Non-destructive neutron imaging based on the attenuation coefficient qualitatively visualized the compositional variation in the bulk and showed good agreement with quantitative Electron Probe Micro-Analysis (EPMA) measurement. Grain structure, texture, and residual plastic strain along the build direction were characterized by Electron Backscatter Diffraction (EBSD). Long columnar grains with (001) preferred grain orientation were dominant along the build direction. Compositional change did not show an obvious effect on the epitaxial growth of dendrites and the continuation of the columnar grains. Residual plastic strain was relatively low in the as-built specimens.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interface-driven magnetic anisotropy in relaxed La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 heterostructures on MgO

We investigate the structural and magnetic properties of La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 (LSMO) heterostructures grown on (001)-oriented MgO by molecular beam epitaxy. Due to the large film-substrate lattice mismatch, strain relaxation is found to occur within the first 2–3 unit cells (uc) of the film as evidenced by reflection high energy electron diffraction and high-resolution synchrotron x-ray reciprocal space mapping. Furthermore, we find that the presence of the LSCO spacer and capping layers leads to ferromagnetism in ultra-thin LSMO layers with thicknesses of the order of 2 uc with the magnetic easy axis oriented in the film plane. Net magnetic moments of 1.4 and 2.4 μ B /Mn are measured for (2 uc LSCO/2 uc LSMO) and (2 uc LSCO/4 uc LSMO) superlattices, respectively, by superconducting quantum interference device magnetometry. The effective magnetic anisotropy of the relaxed (2 uc LSCO/4 uc LSMO) heterostructure is found to be an order of magnitude higher than bulk LSMO highlighting the critical role of interfacial interactions in tuning magnetic anisotropy at complex oxide interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ferroelectricity and superconductivity in strained Eu x Sr 1 – x TiO 3 films

The superconducting transition of SrTiO 3 can be influenced by tuning its ferroelectric transition, but the underlying reasons remain poorly understood. Here, we investigate compressively strained, Sm-doped films of Eu x Sr 1-x TiO 3 that were grown by molecular beam epitaxy to determine the effect of alloying with Eu on both superconductivity and ferroelectricity, both of which are present in strained SrTiO 3 films. Remarkably, superconductivity survives up to x = 0.14. Films at the lowest alloy concentration studied here, x = 0.09, exhibit no suppression of their superconducting transition temperature, but a strong reduction of the upper critical field (H c2 ), compared to non-alloyed, strained SrTiO 3 films. In addition, these films lack the sharp ferroelectric transition that appears in films without Eu in second harmonic generation measurements. Here, we postulate that Eu-alloying causes a crossover from a globally ordered ferroelectric state to one with only short-range polar order. We discuss the connection between the loss of global polar order and the change in the superconducting properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High Velocity, Low‐Voltage Collective In‐Plane Switching in (100) BaTiO 3 Thin Films

Abstract Ferroelectrics are being increasingly called upon for electronic devices in extreme environments. Device performance and energy efficiency is highly correlated to clock frequency, operational voltage, and resistive loss. To increase performance it is common to engineer ferroelectric domain structure with highly‐correlated electrical and elastic coupling that elicit fast and efficient collective switching. Designing domain structures with advantageous properties is difficult because the mechanisms involved in collective switching are poorly understood and difficult to investigate. Collective switching is a hierarchical process where the nano‐ and mesoscale responses control the macroscopic properties. Using chemical solution synthesis, epitaxially nearly‐relaxed (100) BaTiO 3 films are synthesized. Thermal strain induces a strongly‐correlated domain structure with alternating domains of polarization along the [010] and [001] in‐plane axes and 90° domain walls along the [011] or [01] directions. Simultaneous capacitance–voltage measurements and band‐excitation piezoresponse force microscopy revealed strong collective switching behavior. Using a deep convolutional autoencoder, hierarchical switching is automatically tracked and the switching pathway is identified. The collective switching velocities are calculated to be ≈500 cm s −1 at 5 V (7 kV cm −1 ), orders‐of‐magnitude faster than expected. These combinations of properties are promising for high‐speed tunable dielectrics and low‐voltage ferroelectric memories and logic.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optical and electronic functionality arising from controlled defect formation in nanoscale complex oxide lateral epitaxy

Epitaxial crystallization of complex oxides provides the means to create materials with precisely selected composition, strain, and orientation, thereby controlling their functionalities. Extending this control to nanoscale three-dimensional geometries can be accomplished via a three-dimensional analog of oxide solid-phase epitaxy, lateral epitaxial crystallization. The orientation of crystals within laterally crystallized SrTiO 3 systematically changes from the orientation of the SrTiO 3 substrate. This evolution occurs as a function of lateral crystallization distance, with a rate of approximately 50° μm -1 . The mechanism of the rotation is consistent with a steady-state stress of tens of megapascal over a 100–nanometer scale region near the moving amorphous/crystalline interface arising from the amorphous-crystalline density difference. Second harmonic generation and piezoelectric force microscopy reveal that the laterally crystallized SrTiO 3 is noncentrosymmetric and develops a switchable piezoelectric response at room temperature, illustrating the potential to use lateral crystallization to control the functionality of complex oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synthesis of epitaxial TaO$_2$ thin films on Al$_2$O$_3$ by suboxide molecular-beam epitaxy and thermal laser epitaxy

Tantalum dioxide (TaO2) is a metastable tantalum compound. Here, we report the epitaxial stabilization of TaO2 on Al2O3 (1-102) (r-plane sapphire) substrates using suboxide molecular-beam epitaxy (MBE) and thermal laser epitaxy (TLE), demonstrating single-oriented, monodomain growth of anisotropically strained thin films. Microstructural investigation is performed using synchrotron X-ray diffraction and scanning transmission electron microscopy. The tetravalent oxidation state of tantalum is confirmed using X-ray absorption and photoemission spectroscopy as well as electron energy-loss spectroscopy. Optical properties are investigated via spectroscopic ellipsometry and reveal a 0.3 eV Mott gap of the tantalum 5d electrons. Density-functional theory and group theoretical arguments are used to evaluate the limited stability of the rutile phase and reveal the potential to unlock a hidden metal-insulator transition concomitant with a structural phase transition to a distorted rutile phase, akin to NbO2. Our work expands the understanding of tantalum oxides and paves the way for their integration into next-generation electronic and photonic devices.

FOS: Physical sciences↗
DOE OSTI2025

Strain-induced lead-free morphotropic phase boundary

Enhanced susceptibilities in ferroelectrics often arise near phase boundaries between competing ground states. While chemically-induced phase boundaries have enabled ultrahigh electrical and electromechanical responses in lead-based ferroelectrics, precise chemical tuning in lead-free alternatives, such as (K,Na)NbO 3 thin films, remains challenging due to the high volatility of alkali metals. Here, we demonstrate strain-induced morphotropic phase boundary-like polymorphic nanodomain structures in chemically simple, lead-free, epitaxial NaNbO 3 thin films. Combining ab initio simulations, thin-film epitaxy, scanning probe microscopy, synchrotron X-ray diffraction, and electron ptychography, we reveal a labyrinthine structure comprising coexisting monoclinic and bridging triclinic phases near a strain-induced phase boundary. The coexistence of energetically competing phases facilitates field-driven polarization rotation and phase transitions, giving rise to a multi-state polarization switching pathway and large enhancements in dielectric susceptibility and tunability across a broad frequency range. Our results open new possibilities for engineering lead-free thin films with enhanced functionalities for next-generation applications.

Electronic properties and materials↗
DOE OSTI2020

Giant anisotropic magnetoresistance in oxygen-vacancy-ordered epitaxial La 0.5 Sr 0.5 CoO 3–δ films

Recent advances in complex oxide heterostructures have realized extraordinary control over oxygen vacancies ($V_\text{O}$), including strain-tuned $V_\text{O}$ order, and electric-field-controlled transformations between perovskite and $V_\text{O}$-ordered structures. Perovskite cobaltites such as La 1– x Sr x CoO 3–δ provide a prime example, recent work demonstrating that strain engineering of $V_\text{O}$ ordering induces large (~10 7 erg/cm 3 ) perpendicular magnetic anisotropy. Here we show that $V_\text{O}$-ordered epitaxial La 0.5 Sr 0.5 CoO 3–δ films exhibit not only strong magnetic anisotropy, but also a giant form of anisotropic magnetoresistance (AMR). This has magnetic field, temperature, and angular dependencies in quantitative accord with conventional AMR, but with AMR ratios up to an extraordinary 40.3%, 20 times enhanced over bulk cobaltites, and ~10–100 times larger than typical transition metals. This giant AMR has no strong dependence on heteroepitaxial strain (between –2.1% and +1.8%) or thickness, and is instead ascribed to symmetry lowering associated with $V_\text{O}$ ordering. The AMR ratios thus obtained in this work are among the largest reported in the over 160-year history of this phenomenon, despite the absence of heavy elements.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cold Seeded Epitaxy and Flexomagnetism in GdAuGe Membranes Exfoliated From Graphene/Ge(111)

Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do not wet the graphene surface. We develop a cold seed approach for synthesizing smooth intermetallic films on graphene that can be exfoliated to form few nanometer thick single crystalline membranes. Our seeded GdAuGe films have narrow X-ray rocking curve widths of 9–24 arc seconds, which is 2 orders of magnitude lower than their counterparts grown by typical high temperature methods, and have atomically sharp interfaces observed by transmission electron microscopy. Upon exfoliation and rippling, strain gradients in GdAuGe membranes induce an antiferromagnetic to ferri/ferromagnetic transition. Finally, our smooth, ultrathin membranes provide a clean platform for discovering new flexomagnetic effects in quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗
DOE OSTI2023

Evidence of hexagonal germanium grains on annealed monolayer MoS 2

Growing three-dimensional (3D) materials on two-dimensional (2D) van der Waals surface has shown its effectiveness in overcoming materials incompatibility for stacking transferrable membranes toward advanced device manufacturing. Herein, we demonstrate that the nucleation of hexagonal germanium (Ge) grains within a continuous crystalline film, which has been unfeasible through traditional epitaxy techniques, is realized by chemical vapor deposition on top of n-type monolayer molybdenum disulfide (MoS 2 ) substrates. Suggested by quantum molecular dynamics calculation, the hexagonal Ge nucleation is thermodynamically preferable to cubic Ge when growing on monolayer MoS 2 with sulfur vacancies. The strained hexagonal Ge grains have been confirmed by transmission electron microscopy analyses from both real space and reciprocal space. Scanning probe microscopy shows that the hexagonal Ge film possesses higher reflectivity in infrared spectral range, implying a higher carrier concentration resulted from the narrower band gap, as compared to cubic Ge.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Graphene-assisted spontaneous relaxation towards dislocation-free heteroepitaxy

While conventional homoepitaxy forms high-quality epitaxial layers, the limited set of material systems for commercially available wafers restricts the range of materials that can be grown homoepitaxially. At the same time, conventional heteroepitaxy of lattice-mismatched systems produces dislocations above a critical strain energy to release the accumulated strain energy as the film thickness increases. The formation of dislocations, which severely degrade electronic/photonic device performances, is fundamentally unavoidable in highly lattice-mismatched epitaxy. Herein, we introduce a unique mechanism of relaxing misfit strain in heteroepitaxial films that can enable effective lattice engineering. We have observed that heteroepitaxy on graphene-coated substrates allows for spontaneous relaxation of misfit strain owing to the slippery graphene surface while achieving single-crystalline films by reading the atomic potential from the substrate. This spontaneous relaxation technique could transform the monolithic integration of largely lattice-mismatched systems by covering a wide range of the misfit spectrum to enhance and broaden the functionality of semiconductor devices for advanced electronics and photonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Quantification of Oxygen Vacancies in SrFe0.5Cr0.5O3−δ Thin Films: Correlating Lattice Expansion with Oxidation State Variability

Oxygen vacancies (VO), even in the dilute regime, can significantly impact the physical and chemical properties of complex oxides. It is however challenging to reliably detect and adequately quantify such defects in thin film samples where the VO concentration and distribution may further vary in response to interfacial strain. Here, we present a method to quantify VO concentrations in SrFe0.5Cr0.5O3−δ (SFCO) epitaxial thin films. Through coherent Bragg rod analysis, X-ray absorption spectroscopy, and theoretical modeling, we systematically correlate the c-axis lattice expansion detected in SFCO films with a VO concentration gradient. Our results reveal a nearly linear relationship between oxygen off-stoichiometry and out-of-plane lattice expansion in coherently strained SFCO films, with δ increasing from 0.32 to 0.52 and the lattice expanding by ∼1.0%. Moreover, a significant decrease in Cr oxidation state (from Cr5+ to Cr3+) is observed as the VO concentration increases, while the Fe oxidation state remains fixed at Fe3+. Our findings provide a reliable way to quantify oxygen stoichiometry in complex oxides, offering a pathway to design materials with precisely tailored structure–property relationships.

Hossain, Mohammad Delower↗
DOE OSTI2026

Interplay of Quantum Size Effect and Tensile Strain on Surface Morphology of β-Sn(100) Islands

The quantum size effect (QSE) and strain effect are two key factors influencing the surface morphology of thin films, which can increase film surface roughness through QSE-induced thickness oscillation and strain-induced island formation, respectively. Surface roughness usually manifests in the early stages of film growth and diminishes beyond a critical thickness. In this work, we employ molecular beam epitaxy (MBE) to grow β-Sn(100) islands with varying thickness N on bilayer graphene-terminated 6H-SiC(0001) substrates. Scanning tunneling microscopy and spectroscopy measurements reveal an inverse surface roughness effect that highlights the interplay of QSE and misfit strain in shaping the surface morphology of β-Sn(100) islands. For N ≤ 10, the islands exhibit flat surfaces, while for N ≥ 26, the island surfaces become corrugated and patterned. For the intermediate range, i.e., 12 ≤ N ≤ 24, both flat and patterned surfaces coexist, with the percentage coverage of the patterned surface oscillating as a function of N. By performing density functional theory calculations, we demonstrate that the unusual surface pattern evolution in our MBE-grown β-Sn(100) islands is a result of the interplay between QSE-induced surface roughing and tensile strain-induced smoothening effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Strain Engineering: A Pathway for Tunable Functionalities of Perovskite Metal Oxide Films

Perovskite offers a framework that boasts various functionalities and physical properties of interest such as ferroelectricity, magnetic orderings, multiferroicity, superconductivity, semiconductor, and optoelectronic properties owing to their rich compositional diversity. These properties are also uniquely tied to their crystal distortion which is directly affected by lattice strain. Therefore, many important properties of perovskite can be further tuned through strain engineering which can be accomplished by chemical doping or simply element substitution, interface engineering in epitaxial thin films, and special architectures such as nanocomposites. In this review, we focus on and highlight the structure–property relationships of perovskite metal oxide films and elucidate the principles to manipulate the functionalities through different modalities of strain engineering approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First- and second-order magnetic anisotropy and damping of europium iron garnet under high strain

Understanding and tailoring static and dynamic properties of magnetic insulator thin films is important for spintronic device applications. Here, we grow atomically flat epitaxial europium iron garnet (EuIG) thin films by pulsed laser deposition on (111)-oriented garnet substrates with a range of lattice parameters. By controlling the lattice mismatch between EuIG and the substrates, we tune the strain in EuIG films from the compressive to the tensile regime, which is characterized by x-ray diffraction. Using ferromagnetic resonance (FMR), we find that, in addition to the first-order perpendicular magnetic anisotropy which depends linearly on the strain, there is a significant second-order one that has a quadratic strain dependence. Inhomogeneous linewidth of the FMR increases notably with increasing strain, while the Gilbert damping parameter remains nearly constant (≈ 2 × 10 –2 ). Finally, these results provide valuable insight into the spin dynamics in ferrimagnetic insulators and useful guidance for material synthesis and engineering of next-generation spintronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of buffer termination on intermixing and conductivity in LaTiO 3 /SrTiO 3 heterostructures integrated on Si(100)

Here, the control of chemical exchange across heterointerfaces formed between ultrathin functional transition-metal oxide layers provides an effective route to manipulate the electronic properties of these systems. By determining the layer-resolved structural profile across the interface between the Mott insulator, LaTiO 3 (LTO) grown epitaxially on SrTiO 3 (STO)-buffered silicon by molecular beam epitaxy, we find that interfacial cationic exchange depends on the surface termination of the strained STO buffer. Using a combination of temperature-dependent transport and synchrotron x-ray crystal truncation rods and reciprocal space mapping, an enhanced conductivity in STO/LTO/SrO-terminated STO buffers compared to heterostructures with TiO 2 -terminated STO buffers is correlated with La/Sr exchange and the formation of metallic La 1-x Sr x TiO 3 . La/Sr exchange effectively reduces the strain energy of the system due to the large lattice mismatch between the nominal oxide layers and the Si substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Persistent structural distortion for anticipated improper ferroelectricity in ultrathin h-Lu 1− x Ca x MnO 3 films

Improper ferroelectricity in hexagonal rare-earth manganites (h-RMnO 3 , R = Ho–Lu, Y, Sc) arises from a geometric distortion as the primary order parameter, resilient to depolarizing fields and promising for ultrathin ferroelectric devices. However, the substrate-induced interface clamping effect, which suppresses the geometric distortion in the sub-nanometer regime, has thus far hindered the realization of two-dimensional improper ferroelectrics. This study demonstrates that doping with calcium can enhance ferroelectric structural distortion in h-LuMnO 3 thin films. Compressively strained h-Lu 1−x Ca x MnO 3 (x = 0.1, 0.2, 0.3, 0.4, 0.5) epitaxial thin films were stabilized on sapphire substrates using an h-ScFeO 3 buffer layer. We have found that the interface clamping effect is entirely overcome when the doping concentration reaches x ⩾ 0.2, establishing a potential quasi-2D ferroelectric system with a remarkably high estimated structural transition temperature of larger than 1200 K inferred indirectly from temperature-resolved reflection high-energy electron diffraction. This finding suggests a general strain engineering strategy to enhance improper ferroelectricity in hexagonal manganites.

hexagonal manganites↗