Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLOW - CHANNELS, TURBULENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Turbulent-flow separation criteria for overexpanded supersonic nozzles

A comprehensive compilation of available turbulent flow separation data for overexpanded supersonic nozzles is presented with a discussion of correlation techniques, and prediction methods. Data are grouped by nozzle types: conical, contoured, and two dimensional wedge. Correlation of conical nozzle separation is found to be independent of nozzle divergence half-angle above the 9 deg, whereas the contoured nozzle data follow a different correlation curve. Zero pressure gradient prediction techniques are shown to predict adequately the higher divergence angle conical separation data, and an empirical equation is given for the contoured nozzle data correlation. Flow conditions for which the correlations are invalid are discussed and bounded. A nozzle boundary layer transition criterion is presented which can be used to show that much of the noncorrelating data in the literature are concerned with nonturbulent separation and which explains the previously reported external flow effects on nozzle separation.

Morrisette, E. L.↗
NASA NTRS2005

Measurements of Flow Turbulence in the NASA Langley Transonic Dynamics Tunnel

An assessment of the flow turbulence in the NASA Langley Transonic Dynamics Tunnel (TDT) was conducted during calibration activities following the facility conversion from a Freon-12 heavy-gas test medium to an R134a heavy-gas test medium. Total pressure, static pressure, and acoustic pressure levels were measured at several locations on a stingmounted rake. The test measured wall static pressures at several locations although this paper presents only those from one location. The test used two data acquisition systems, one sampling at 1000 Hz and the second sampling at 125 000 Hz, for acquiring time-domain data. This paper presents standard deviations and power spectral densities of the turbulence points throughout the wind tunnel envelope in air and R134a. The objective of this paper is to present the turbulence characteristics for the test section. No attempt is made to assess the causes of the turbulence. The present paper looks at turbulence in terms of pressure fluctuations. Reference 1 looked at tunnel turbulence in terms of velocity fluctuations.

Wiesman, Carol D.↗
NASA NTRS1988

Mathematical models for the numerical study of turbulent flows

This paper presents (1) a brief overview of mathematical models used in the numerical study of turbulent flows; (2) a k-epsilon model of turbulence; and (3) extensions of the k-epsilon model. These account for some of the effects of compressibility, low Reynolds number, streamline curvature, and preferential stress dissipation.

Shih, Tom I-Ping↗
NASA NTRS1979

Turbulent flow and pumping in the cavity of a chemical laser

The kinetic theory of turbulent flow is employed to estimate an upper bound on the production rates of the lasing species in a free turbulent mixing layer. The maximum production rate is found to be about one third to one half of that predicted by a flame-sheet theory. The effects of turbulence scale and energy on the overall reaction rates are discussed and the gross structure of the combustion zone is determined.

Hayday, A. A.↗
NASA NTRS1990

Turbulent flow calculations using unstructured and adaptive meshes

A method of efficiently computing turbulent compressible flow over complex two dimensional configurations is presented. The method makes use of fully unstructured meshes throughout the entire flow-field, thus enabling the treatment of arbitrarily complex geometries and the use of adaptive meshing techniques throughout both viscous and inviscid regions of flow-field. Mesh generation is based on a locally mapped Delaunay technique in order to generate unstructured meshes with highly-stretched elements in the viscous regions. The flow equations are discretized using a finite element Navier-Stokes solver, and rapid convergence to steady-state is achieved using an unstructured multigrid algorithm. Turbulence modeling is performed using an inexpensive algebraic model, implemented for use on unstructured and adaptive meshes. Compressible turbulent flow solutions about multiple-element airfoil geometries are computed and compared with experimental data.

Mavriplis, Dimitri J.↗
NASA NTRS1991

Turbulent flow calculations using unstructured and adaptive meshes

A method of efficiently computing turbulent compressible flow over complex two dimensional configurations is presented. The method makes use of fully unstructured meshes throughout the entire flow field, thus enabling the treatment of arbitrarily complex geometries and the use of adaptive meshing techniques throughout both viscous and inviscid regions of the flow field. Mesh generation is based on a locally mapped Delaunay technique in order to generate unstructured meshes with highly-stretched elements in the viscous regions. The flow equations are discretized using a finite element Navier-Stokes solver, and rapid convergence to steady-state is achieved using an unstructured multigrid algorithm. Turbulence modeling is performed using an inexpensive algebraic model, implemented for use on unstructured and adaptaive meshes. Compressible turbulent flow solutions about multiple-element airfoil geometries are computed and compared with expeirmental data.

Mavriplis, Dimitri J.↗
NASA NTRS1986

Numerical prediction of cold turbulent flow in combustor configurations with different centerbody flame holders

A numerical study of cold turbulent flow in a combustor containing a centerbody flame holder is presented. The axisymmetric Navier-Stokes equations incorporating a k-epsilon turbulence model were solved in a nonorthogonal curvilinear coordinate system. The finite volume method, applied to a staggered grid system, was used to discretize the differential equations. These finite differenced equations were then solved iteratively utilizing the SIMPLE algorithm described by Patankar (1980). Solutions were obtained for two combustor duct geometries with various centerbody flame holders which included a disk, a cone, and a sphere. The extent of mixing due to these bodies was evaluated. A comparison with previously obtained experimental data yielded moderately good agreement.

Yung, C. N.↗
NASA NTRS1991

Combustion wave instabilities in turbulent flows

Navier-Stokes solutions are used to calculate oscillatory components of pressure, velocity, and density, which in turn provide necessary data to compute energy growth factors to determine combustion instability. It is shown that wave instabilities are associated with changes in entropy and the space and time averages of oscillatory components of pressure, velocity and density, together with the mean flow field in the energy equation. Compressible laminar and turbulent flows and reacting flows with hydrogen/oxygen combustion are considered in this paper. The space shuttle main engine combustion/thrust chamber is used for illustration of the theory. The analysis shows that the increase of mean pressure and disturbances consistently results in the increase in instability. It is shown that adequate combustion instability analysis requires at least third order nonlinearity in energy growth or decay.

Yoon, W. S.↗
NASA NTRS2008

On Identifying the Sound Sources in a Turbulent Flow

A space-time filtering approach is used to divide an unbounded turbulent flow into its radiating and non-radiating components. The result is then used to clarify a number of issues including the possibility of identifying the sources of the sound in such flows. It is also used to investigate the efficacy of some of the more recent computational approaches.

Goldstein, M. E.↗
DOE OSTI2022

Clustering of inertial particles in turbulent flow through a porous unit cell

We report direct numerical simulation is used to investigate effects of turbulent flow in the confined geometry of a face-centred cubic porous unit cell on the transport, clustering and deposition of fine particles at different Stokes numbers (St = 0.01, 0.1, 0.5, 1, 2) and at a pore Reynolds number of 500. Particles are advanced using one-way coupling and the collision of particles with pore walls is modelled as perfectly elastic with specular reflection. Tools for studying inertial particle dynamics and clustering developed for homogeneous flows are adapted to take into account the embedded, curved geometry of the pore walls. The pattern and dynamics of clustering are investigated using the volume change of Voronoi tesselation in time to analyse the divergence and convergence of the particles. Similar to the case of homogeneous, isotropic turbulence, the cluster formation is present at large volumes, while cluster destruction is prominent at small volumes and these effects are amplified with the Stokes number. However, unlike homogeneous, isotropic turbulence, the formation of a large number of very small volumes was observed at all Stokes numbers and attributed to the collision of particles with the pore wall. Multiscale wavelet analysis of the particle number density indicates that the peak of the energy density spectrum, representative of enhanced particle clustering, shifts towards larger scales with an increase in the Stokes number. Scale-dependent skewness and flatness quantify the intermittent void and cluster distribution, with cluster formation observed at small scales for all Stokes numbers, and void regions at large scales for large Stokes numbers.

42 ENGINEERING↗
NASA NTRS1987

On the interaction of small and large eddies in two dimensional turbulent flows

Some results concerning the interaction of small and large eddies to two dimensional turbulent flows are presented. It is shown that the amplitude of small structures decays exponentially to a small value, and from this is inferred a simplified interaction law of small and large eddies. Beside their intrinsic interest for the understanding of the physics of turbulence, these results lead to new numerical schemes to be studied in a separate work.

Foias, C.↗
NASA NTRS1979

Evaluation of subgrid-scale models using an accurately simulated turbulent flow

A calculation of periodic homogeneous isotropic turbulence is used to simulate the experimental decay of grid turbulence. The calculation is found to match the experiment in a number of important aspects and the computed flow field is then treated as a realization of a physical turbulent flow. From this flow, a calculation is conducted of the large eddy field and the various averages of the subgrid-scale turbulence that occur in the large eddy simulation equations. These quantities are compared with the predictions of the models that are usually applied in large eddy simulation. The results show that the terms which involve the large-scale field are accurately modeled but the subgrid-scale Reynolds stresses are only moderately well modeled. It is also possible to use the method to predict the constants of the models without reference to experiment. Attempts to find improved models have not met with success.

Clark, R. A.↗
NASA NTRS1990

Toward the large-eddy simulation of compressible turbulent flows

New subgrid-scale models for the large-eddy simulation of compressible turbulent flows are developed and tested based on the Favre-filtered equations of motion for an ideal gas. A compressible generalization of the linear combination of the Smagorinsky model and scale-similarity model, in terms of Favre-filtered fields, is obtained for the subgrid-scale stress tensor. An analogous thermal linear combination model is also developed for the subgrid-scale heat flux vector. The two dimensionless constants associated with these subgrid-scale models are obtained by correlating with the results of direct numerical simulations of compressible isotropic turbulence performed on a 96(exp 3) grid using Fourier collocation methods. Extensive comparisons between the direct and modeled subgrid-scale fields are provided in order to validate the models. A large-eddy simulation of the decay of compressible isotropic turbulence (conducted on a coarse 32(exp 3) grid) is shown to yield results that are in excellent agreement with the fine grid direct simulation. Future applications of these compressible subgrid-scale models to the large-eddy simulation of more complex supersonic flows are discussed briefly.

Erlebacher, G.↗
NASA NTRS1992

Toward the large-eddy simulation of compressible turbulent flows

New subgrid-scale models for the large-eddy simulation of compressible turbulent flows are developed and tested based on the Favre-filtered equations of motion for an ideal gas. A compressible generalization of the linear combination of the Smagorinsky model and scale-similarity model, in terms of Favre-filtered fields, is obtained for the subgrid-scale stress tensor. An analogous thermal linear combination model is also developed for the subgrid-scale heat flux vector. The two dimensionless constants associated with these subgrid-scale models are obtained by correlating with the results of direct numerical simulations of compressible isotropic turbulence performed on a 96 (exp 3) grid using Fourier collocation methods. Extensive comparisons between the direct and modeled subgrid-scale fields are provided in order to validate the models. A large-eddy simulation of the decay of compressible isotropic turbulence (conducted on a coarse 32(exp 3) grid) is shown to yield results that are in excellent agreement with the fine-grid direct simulation. Future applications of these compressible subgrid-scale models to the large-eddy simulation of more complex supersonic flows are discussed briefly.

Erlebacher, G.↗
NASA NTRS1987

Toward the large-eddy simulations of compressible turbulent flows

New subgrid-scale models for the large-eddy simulation of compressible turbulent flows are developed based on the Favre-filtered equations of motion for an ideal gas. A compressible generalization of the linear combination of the Smagorinsky model and scale-similarity model (in terms of Favre-filtered fields) is obtained for the subgrid-scale stress tensor. An analogous thermal linear combination model is also developed for the subgrid-scale heat flux vector. The three dimensionless constants associated with these subgrid-scale models are obtained by correlating with the results of direct numerical simulations of compressible isotropic turbulence performed on a 96 to the third power grid using Fourier collocation methods. Extensive comparisons between the direct and modeled subgrid-scale fields are provided in order to validate the models. Future applications of these compressible subgrid-scale models to the large-eddy simulation of supersonic aerodynamic flows are discussed briefly.

Erlebacher, G.↗
NASA NTRS1989

Noise produced by turbulent flow into a rotor: Users manual for noise calculation

A users manual for a computer program for the calculation of noise produced by turbulent flow into a helicopter rotor is presented. These inputs to the program are obtained from the atmospheric turbulence model and mean flow distortion calculation, described in another volume of this set of reports. Descriptions of the various program modules and subroutines, their function, programming structure, and the required input and output variables are included. This routine is incorporated as one module of NASA's ROTONET helicopter noise prediction program.

Amiet, R. K.↗
NASA NTRS1975

Computation of separated transonic turbulent flows

The two-dimensional Reynolds-averaged compressible Navier-Stokes equations are solved using MacCormack's second-order-accurate explicit finite difference method to simulate the separated transonic turbulent flow field over an airfoil. Four different algebraic eddy viscosity models are tested for viability to achieve turbulence closure for the class of flows considered. These models range from an unmodified boundary-layer mixing-length model to a relaxation model incorporating special considerations for the separation bubble region. Results of this study indicate the necessity for special attention to the separated flow region and suggest limits of applicability of algebraic turbulence models to these separated flow fields.

Deiwert, G. S.↗
NASA NTRS1971

An experimental facility for the visual study of turbulent flows.

An experimental technique which allows visual observations of the wall area in turbulent pipe flow is described in detail. It requires neither the introduction of any injection or measuring device into the flow nor the presence of a two-phase flow or of a non-Newtonian fluid. The technique involves suspending solid MgO particles of colloidal size in trichloroethylene and photographing their motions near the wall with a high speed movie camera moving with the flow. Trichloroethylene was chosen in order to eliminate the index of refraction problem in a curved wall. Evaluation of the technique including a discussion of limitations is included. Also the technique is compared with previous methods of visual observations of turbulent flow.

Brodkey, R. S.↗