Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLOW STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

The inviscid stability of supersonic flow past a sharp cone

The effects of lateral curvature on the development of supersonic laminar inviscid boundary-layer flow on a sharp cone with adiabatic wall conditions are investigated analytically, with a focus on the linear temporal inviscid stability properties. The derivation of the governing equations and of a 'triply generalized' inflexion condition is outlined, and numerical results for freestream Mach number 3.8 are presented in extensive graphs and characterized in detail. A third instability mode related to the viscous mode observed by Duck and Hall (1990) using triple-deck theory is detected and shown to be more unstable and to have larger growth rates than the second mode in some cases. It is found that the 'sonic' neutral mode is affected by the lateral curvature and becomes a supersonic neutral mode.

Duck, Peter W.↗
NASA NTRS1983

Stability and Interaction of Coherent Structure in Supersonic Reactive Wakes

A theoretical formulation and analysis is presented for a study of the stability and interaction of coherent structure in reacting free shear layers. The physical problem under investigation is a premixed hydrogen-oxygen reacting shear layer in the wake of a thin flat plate. The coherent structure is modeled as a periodic disturbance and its stability is determined by the application of linearized hydrodynamic stability theory which results in a generalized eigenvalue problem for reactive flows. Detailed stability analysis of the reactive wake for neutral, symmetrical and antisymmetrical disturbance is presented. Reactive stability criteria is shown to be quite different from classical non-reactive stability. The interaction between the mean flow, coherent structure and fine-scale turbulence is theoretically formulated using the von-Kaman integral technique. Both time-averaging and conditional phase averaging are necessary to separate the three types of motion. The resulting integro-differential equations can then be solved subject to initial conditions with appropriate shape functions. In the laminar flow transition region of interest, the spatial interaction between the mean motion and coherent structure is calculated for both non-reactive and reactive conditions and compared with experimental data wherever available. The fine-scale turbulent motion determined by the application of integral analysis to the fluctuation equations. Since at present this turbulence model is still untested, turbulence is modeled in the interaction problem by a simple algebraic eddy viscosity model. The applicability of the integral turbulence model formulated here is studied parametrically by integrating these equations for the simple case of self-similar mean motion with assumed shape functions. The effect of the motion of the coherent structure is studied and very good agreement is obtained with previous experimental and theoretical works for non-reactive flow. For the reactive case, lack of experimental data made direct comparison difficult. It was determined that the growth rate of the disturbance amplitude is lower for reactive case. The results indicate that the reactive flow stability is in qualitative agreement with experimental observation.

Menon, Suresh↗
NASA NTRS1981

Instability and transition in rotating disk flow

The stability of three dimensional rotating disk flow and the effects of Coriolis forces and streamline curvature were investigated. It was shown that this analysis gives better growth rates than Orr-Sommerfeld equation. Results support the numerical prediction that the number of stationary vortices varies directly with the Reynolds number.

Malik, M. R.↗
NASA NTRS1985

Chaotic behaviour of high Mach number flows

The stability of the super-Alfvenic flow of a two-fluid plasma model with respect to the Mach number and the angle between the flow direction and the magnetic field is investigated. It is found that, in general, a large scale chaotic region develops around the initial equilibrium of the laminar flow when the Mach number exceeds a certain threshold value. After reaching a maximum the size of this region begins shrinking and goes to zero as the Mach number tends to infinity. As a result high Mach number flows in time independent astrophysical plasmas may lead to the formation of 'quasi-shocks' in the presence of little or no dissipation.

Varvoglis, H.↗
NASA NTRS1988

Transition prediction in external flows via linear stability theory

Linear stability theory results are presented for flight and low-disturbance wind tunnels, at low and high speeds, and for T-S, Gortler, and cross-flow modes. Results show that, in the absence of Morkovin 'bypasses', transition at low background disturbance levels corresponds to N-factors of the order of 9 to 11, provided that phenomena such as curvature effects are included. The results point to a wider range of applicability for the e exp N method than previously conjectured, and suggest that the e exp N method can be used to parametrize transition predictions as a function of parameters which affect the mean flow profiles for such purposes as LFC and minimum drag design.

Bushnell, D. M.↗
NASA NTRS1981

Instability and transition in rotating disk flow

The stability of three-dimensional rotating disk flow is investigated, including the effects of Coriolis forces and streamline curvature. The numerical results show that the critical Reynolds number for establishment of stationary vortex flow is 287. These vortices spiral outward at an angle of about 11.2 deg, and transition to turbulence occurs when their total amplification is about e to the 11th. New experimental results are also reported on the spatial growth rates of the stationary vortices. It is shown that the analysis gives growth rates that compare much better with the experimental results than do results obtained using the Orr-Sommerfeld equation. The experimental results tend to support the numerical prediction that the number of stationary vortices varies directly with the Reynolds number. The calculations also indicate the existence of weakly unstable propagating (type II) modes at low Reynolds numbers (Critical Reynolds Number being approximately equal to 49).

Malik, M. R.↗
NASA NTRS1990

Travelling disturbances in rotating-disk flow

The stability curves for traveling disturbances in rotating-disk flow are computed using the sixth-order system of incompressible linear stability equations. The neutral curve has two minima for disturbances with positive frequencies as found earlier by Malik (1986) for stationary disturbances. The upper branch minimum occurs at omega = -2.9, R = 283.6 while the lower branch minimum occurs at omega = 7.9, R = 64.46, where R is Reynolds number. There exists a critical angle of approximately -35.34 deg below which all the waves are linearly damped.

Balakumar, P.↗
NASA NTRS2019

Adjoint-Based Anisotropic Mesh Adaptation for a Stabilized Finite-Element Flow Solver

An adjoint solver is implemented in the FUN3D stabilized finite-element flow solver. The adjoint solution is used to generate anisotropic, adapted meshes to control error in scalar out- put functionals, such as lift or drag coefficient. The inviscid and turbulent adjoints are verified with a finite-difference derivative approximation and can be used in design optimization in addition to mesh adaptation. The adjoint capability represents an extension of previous research using the FUN3D stabilized finite-element capability with metric-based mesh adaptation and interpolation-based error estimates to generate highly anisotropic adapted meshes for turbulent flows. In the present work, a metric-based approach is again utilized, where the adjoint and the primal solutions both contribute to the generation of a metric tensor field that is subsequently used to produce the required anisotropic mesh for each adaptation cycle. Adaptive results are then shown for an inviscid supersonic flow over a diamond airfoil, inviscid transonic flow over the ONERA M6 wing, and viscous laminar flow over the NACA 0012 airfoil, all using drag force as the output functional. Adjoint-based adaptation is compared with a multiscale solution-based approach that controls the L norm of Mach number interpolation error to demonstrate the effectiveness and effciency of the adjoint-based adaptive mesh technology.

Balan, Aravind↗
NASA NTRS1974

Canonical fluid thermodynamics

The space-time integral of the thermodynamic pressure plays in a certain sense the role of the thermodynamic potential for compressible adiabatic flow. The stability criterion can be converted into a variational minimum principle by requiring the molar free-enthalpy and temperature to be generalized velocities. In the fluid context, the definition of proper-time differentiation involves the fluid velocity expressed in terms of three particle identity parameters. The pressure function is then converted into a functional which is the Lagrangian density of the variational principle. Being also a minimum principle, the variational principle provides a means for comparing the relative stability of different flows. For boundary conditions with a high degree of symmetry, as in the case of a uniformly expanding spherical gas box, the most stable flow is a rectilinear flow for which the world-trajectory of each particle is a straight line. Since the behavior of the interior of a freely expanding cosmic cloud may be expected to be similar to that of the fluid in the spherical box of gas, this suggests that the cosmic principle is a consequence of the laws of thermodynamics, rather than just an ad hoc postulate.

Schmid, L. A.↗
NASA NTRS1980

Soliton solutions and their stability for the flow of relativistic fluids through channels

The flow of a perfect relativistic fluid through channels of various cross-sections is considered with reference to models of radio galaxies. Soliton-like solutions are found and their topologies are discussed. The calculations show that these solutions are unstable. It is suggested that under realistic astrophysical conditions the growth rate of the instabilities is so slow that soliton-type blobs may persist for a significant time.

Lerche, I.↗
NASA NTRS1980

Self-similar solutions and their stability for the flow of relativistic fluids through channels

The paper analyzes the flow of a perfect relativistic fluid in a circular confining channel of variable cross-section, a situation which is currently thought to be relevant for models of beams protruding from radio galaxies. Families of self-similar solutions are found, and some of their topological characteristics are illustrated. However, a perturbative investigation of the solutions indicates that all such self-similar modes are unstable and would eventually evolve into some non-self-similar form.

Lerche, I.↗
NASA NTRS1982

Thermocapillary flows and their stability: Effects of surface layers and contamination

The fluid mechanics and heat transfer of motions driven by surface tension gradients (Marangoni convection) were analyzed theoretically to obtain an understanding of the convection accompanying the process of growing high quality single crystals from the melt in a mu-g environment. The geometries considered include two dimensional liquid filled slots and axisymmetric float zone configurations.

Davis, S. H.↗
NASA NTRS1984

Thermocapillary flows and their stability: Effects of surface layers and combination

The theoretical analysis of the fluid mechanics and heat transfer of motions driven by surface tension gradients (Marangoni convection) was researched. Convection accompanying the process of growing high quality single crystals from the melt in a micro-g environment was examined. The geometries considered include two dimensional liquid filled slots and axisymmetric float-zone configurations.

Davis, S. H.↗
NASA NTRS1989

Role of circumferential flow in the stability of fluid-handling machine rotors

The recent studies of the dynamic stiffness properties of fluid lubricated bearing and seals by the authors have yielded most of the generalized characteristics discussed and used in this paper. They include bearing and seal nonlinear fluid film properties associated with stiffness, damping, and fluid average circumferential velocity ratio. Analytical relationships yield the rotor system's dynamic stiffness characteristics. This paper shows the combination of these data to provide the fluid-induced rotor stability equations.

Bently, D. E.↗