Search NASA⌕ Search

SEARCH · Search NASA

Results for “Finite-difference approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A fast, conservative algorithm for solving the transonic full-potential equation

A fast, fully implicit approximate factorization (AF) algorithm designed to solve the conservative transonic full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., 'rotated differencing'), and thereby greatly enhances the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line overrelaxation algorithms.

Holst, T. L.↗
NASA NTRS1979

Implicit finite-difference simulations of steady and unsteady transonic flows

Implicit methods for several fluid dynamic formulations have been developed and applied to steady-state and low-frequency transonic flows. The basic steps involved in the construction of implicit schemes include: selection of linearly stable accurate implicit difference operators, time-linearization of nonlinear terms, and approximate factorization of the implicit operators into easily solved systems of equations. The proposed schemes are found very efficient for the simpler formulations.

Ballhaus, W. F.↗
NASA NTRS1982

Development of low-frequency kernel-function aerodynamics for comparison with time-dependent finite-difference methods

Finite difference methods for unsteady transonic flow frequency use simplified equations in which certain of the time dependent terms are omitted from the governing equations. Kernel functions are derived for two dimensional subsonic flow, and provide accurate solutions of the linearized potential equation with the same time dependent terms omitted. These solutions make possible a direct evaluation of the finite difference codes for the linear problem. Calculations with two of these low frequency kernel functions verify the accuracy of the LTRAN2 and HYTRAN2 finite difference codes. Comparisons of the low frequency kernel function results with the Possio kernel function solution of the complete linear equations indicate the adequacy of the HYTRAN approximation for frequencies in the range of interest for flutter calculations.

Bland, S. R.↗
NASA NTRS1982

Application of two-point difference schemes to the conservative Euler equations for one-dimensional flows

An implicit finite-difference method is presented for obtaining steady-state solutions to the time-dependent, conservative Euler equations for flows containing shocks. The method uses a two-point central difference scheme with dissipation added at supersonic points via the retarded density concept. Application of the method to the one-dimensional nozzle flow equations for various combinations of subsonic and supersonic boundary conditions show the method to be very efficient. Residuals are typically reduced to machine zero in approximately 35 time steps for 50 mesh points. It is shown that the scheme offers certain advantages over the more widely-used three-point schemes, especially in regard to application of boundary conditions.

Wornom, S. F.↗
NASA NTRS1983

An implicit, transonic, full-potential code for cascade flow on H-grid topology

A transonic, full-potential code is developed for computing the flow through two-dimensional cascades using an H-type grid topology that employs an implicit approximate-factorization scheme. The body-conforming H-grid is generated numerically by solving Poisson's equation. The flow-solution algorithm at the coordinate mapping singularity associated with this grid is investigated using two different types of finite-difference schemes. The grid-geometry effect on these schemes is also studied by noting free-stream capturing properties. It is found that by implementing a consistent spatial differencing scheme, the mapping singularities can be resolved numerically, and the grid-geometry-induced error minimized. The code is verified by computing model cascade flow problems.

Kwak, D.↗
NASA NTRS1984

A two-point difference scheme for computing steady-state solutions to the conservative one-dimensional Euler equations

An implicit finite-difference method is presented for obtaining steady-state solutions to the time-dependent, conservative Euler equations for flows containing shocks. The method uses a two-point central-difference scheme for the flux derivatives with dissipation added at supersonic points via the retarded density concept. Application of the method to 1-dimensional nozzle flow equations for various combinations of subsonic and supersonic boundary conditions show the method to be very efficient. Residuals are typically reduced to machine zero in approximately 35 time steps for 50 mesh points. For 1-dimensional Euler calculations, it is shown that the scheme offers two advantages over the more widely-used three-point schemes. The first is in regard to application of boundary conditions, and the second relates to the fact that the two-point algorithm is well-conditioned for large time steps.

Wornom, S. F.↗
NASA NTRS1985

A first-order time-domain Green's function approach to supersonic unsteady flow

A time-domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. The Green's function method is employed in order to convert the potential-flow differential equation into an integral one. This integral equation is then discretized, in space through standard finite-element technique, and in time through finite-difference, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. Consistent with the spatial linear (first-order) finite-element approximations, the potential and co-normalwash are assumed to vary linearly in time. The long range goal of our research is to develop a comprehensive theory for unsteady supersonic potential aerodynamics which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

Freedman, M. I.↗
NASA NTRS1986

An implicit flux-difference splitting scheme for three-dimensional, incompressible Navier-Stokes solutions to leading edge vortex flows

A new, implicit finite-difference scheme designed to solve the conservative, flux-difference split Navier-Stokes equations is used to compute incompressible vortex flows around delta wings. The completely vectorizable hybrid algorithm is constructed in delta form for steady state solutions independent of the time-step sizes. The scheme combines approximate factorization in crossflow planes with a symmetric planar Gauss-Seidel relaxation in the remaining spatial direction. The governing equations are solved in curvilinear, body-fitted coordinates for treating complex geometries. The computed flow field results are compared with other theoretical and experimental data.

Hartwich, P.-M.↗
NASA NTRS1987

A three-dimensional dual potential procedure with applications to wind tunnel inlets and interacting boundary layers

A dual potential decomposition of the velocity field into a scalar and a vector potential function is extended to three dimensions and used in the finite-difference simulation of steady three-dimensional inviscid rotational flows and viscous flow. The finite-difference procedure was used to simulate the flow through the 80 by 120 ft wind tunnel at NASA Ames Research Center. Rotational flow produced by the stagnation pressure drop across vanes and screens which are located at the entrance of the inlet is modeled using actuator disk theory. Results are presented for two different inlet vane and screen configurations. The numerical predictions are in good agreement with experimental data. The dual potential procedure was also applied to calculate the viscous flow along two and three dimensional troughs. Viscous effects are simulated by injecting vorticity which is computed from a boundary layer algorithm. For attached flow over a three dimensional trough, the present calculations are in good agreement with other numerical predictions. For separated flow, it is shown from a two dimensional analysis that the boundary layer approximation provides an accurate measure of the vorticity in regions close to the wall; whereas further away from the wall, caution has to be exercised in using the boundary-layer equations to supply vorticity to the dual potential formulation.

Rao, K. V.↗
NASA NTRS1987

Incompressible Navier-Stokes solutions for a sharp-edged double-delta wing

An implicit finite-difference scheme is used to compute the incompressible laminar vortical flow around a double-delta wing with an aspect ratio of 2.06. By adding a time derivative of the pressure to the continuity equation, the unsteady incompressible Navier-Stokes equations can be integrated like a conventional parabolic time-dependent system of equations. The flux-difference split scheme combines approximate factorization in crossflow planes with a symmetric planar Gauss-Seidel relaxation in the remaining spatial direction. The trajectory of the vortical core is well predicted in comparison with experimental data.

Hsu, Chung-Hao↗
NASA NTRS1989

Explicit and implicit calculations of turbulent cavity flows with and without yaw angle

Computations were performed to simulate turbulent supersonic flows past three-dimensional deep cavities with and without yaw. Simulation of these self-sustained oscillatory flows were generated through time accurate solutions of the Reynolds averaged complete Navier-Stokes equations using two different schemes: (1) MacCormack, finite-difference; and (2) implicit, upwind, finite-volume schemes. The second scheme, which is approximately 30 percent faster, is found to produce better time accurate results. The Reynolds stresses were modeled, using the Baldwin-Lomax algebraic turbulence model with certain modifications. The computational results include instantaneous and time averaged flow properties everywhere in the computational domain. Time series analyses were performed for the instantaneous pressure values on the cavity floor. The time averaged computational results show good agreement with the experimental data along the cavity floor and walls. When the yaw angle is nonzero, there is no longer a single length scale (length-to-depth ratio) for the flow, as is the case for zero yaw angle flow. The dominant directions and inclinations of the vortices are dramatically different for this nonsymmetric flow. The vortex shedding from the cavity into the mainstream flow is captured computationally. This phenomenon, which is due to the oscillation of the shear layer, is confirmed by the solutions of both schemes.

Yen, Guan-Wei↗
NASA NTRS1990

Integral solution of unsteady full-potential equation for a transonic pitching airfoil

The unsteady full-potential equation formulation in a moving frame of reference has been has been developed and used to solve unsteady transonic flow problems. An unsteady integral-equation shock-capturing (IE-SC) scheme has been developed. The resulting unsteady IE-SC scheme is applied to a NACA 0012 airfoil undergoing a pitching oscillation. The numerical results are compared with those of an implicit, approximately factored, finite-volume Euler scheme. The present scheme is efficient in terms of the number of iterations as compared to the other existing schemes, which use finite-difference or finite-volume methods.

Kandil, Osama A.↗
NASA NTRS1991

Radiative interactions in chemically reacting supersonic internal flows

The two-dimensional, elliptic Navier-Stokes equations are used to investigate supersonic flows with finite-rate chemistry and radiation for hydrogen-air systems. The chemistry source terms in the species equation is treated implicitly to alleviate the stiffness associated with fast reactions. The explicit, unsplit MacCormack finite-difference scheme is used to advance the governing equations in time, until convergence is achieved. The specific problem considered is the premixed flow in a channel with a ten-degree compression ramp. Three different chemistry models are used, accounting for increasing number of reactions and participating species. Two chemistry models assure nitrogen as inert, while the third model accounts for nitrogen reactions and NO(x) formation. The tangent slab approximation is used in the radiative flux formulation. A pseudo-gray model is used to represent the absorption-emission characteristics of the participating species. Results obtained for specific conditions indicate that the radiative interactions vary substantially, depending on reactions involving HO2 and NO species and that this can have a significant influence on the flowfield.

Tiwari, S. N.↗
NASA NTRS1991

Radiative interactions in a hydrogen-fueled supersonic combustor

The two-dimensional, elliptic Navier-Stokes equations are used to investigate supersonic flows with finite-rate chemistry and radiation, for hydrogen-air systems. The chemistry source term in the species equation is treated implicitly to alleviate the stiffness associated with fast reactions. The explicit, unsplit MacCormack finite-difference scheme is used to advance the governing equations in time, until convergence is achieved. The specific problem considered is the premixed flow in a channel with a 10-deg compression ramp. Three different chemistry models are used, accounting for increasing number of reactions and participating species. Two chemistry models assume nitrogen as inert, while the third model accounts for nitrogen reactions and NO(x) formation. The tangent slab approximation is used in the radiative flux formulation. A pseudogray model is used to represent the absorption-emission characteristics of the participating species. Results otained for specific conditions indicate that the radiative interactions vary substantially, depending on reactions involving HO2 and NO species, and that this can have a significant influence on the flowfield.

Chandrasekhar, R.↗
NASA NTRS1993

High-order cyclo-difference techniques: An alternative to finite differences

The summation-by-parts energy norm is used to establish a new class of high-order finite-difference techniques referred to here as 'cyclo-difference' techniques. These techniques are constructed cyclically from stable subelements, and require no numerical boundary conditions; when coupled with the simultaneous approximation term (SAT) boundary treatment, they are time asymptotically stable for an arbitrary hyperbolic system. These techniques are similar to spectral element techniques and are ideally suited for parallel implementation, but do not require special collocation points or orthogonal basis functions. The principal focus is on methods of sixth-order formal accuracy or less; however, these methods could be extended in principle to any arbitrary order of accuracy.

Carpenter, Mark H.↗
NASA NTRS1993

Flux-difference split parabolized Navier-Stokes algorithm for non-equilibrium chemically reacting flows

A flux-difference split explicit finite-difference algorithm is presented for solving the parabolized form of the equations governing three-dimensional nonequilibrium chemically reacting flows. The algorithm is based on an explicit noniterative, upwind space-marching scheme developed by Korte, but differs in that the unsteady Riemann problem, rather than the steady Riemann problem, is solved. The algorithm allows either a second or an approximately third-order accurate upwind treatment of the convection terms by employing the unsteady approximate Riemann solver of Roe. The source terms of the species transport equations are treated in either an explicit or implicit manner, and the species diffusion terms are modeled with either a Fickian or a multicomponent model. A validation of the algorithm is performed by comparing computational results with the 2-D Mach 14, 15 degree compression-corner data of Holden. The three-dimensional capability of the algorithm is demonstrated by computing Mach 2.7 flow over a swept wedge scramjet fuel injector, and three-dimensional reacting flow capability is demonstrated by a computing a shock-jet interaction concept for mixing and combustion enhancement.

White, J. A.↗
NASA NTRS1980

Fast, Conservative Algorithm for Solving the Transonic Full-Potential Equation

A fast, fully implicit approximate factorization algorithm designed to solve the conservative, transonic, full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., rotated differencing), thereby greatly enhancing the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted, finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line over-relaxation algorithms.

Holst, Terry L.↗