Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fluid drag”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Arc-driven rail accelerator research

Arc-driven rail accelerator research is analyzed by considering wall ablation and viscous drag in the plasma. Plasma characteristics are evaluated through a simple fluid-mechanical analysis considering only wall ablation. By equating the energy dissipated in the plasma with the radiation heat loss, the average properties of the plasma are determined as a function of time and rate of ablation. Locations of two simultaneously accelerating arcs were determined by optical and magnetic probes and fron streak camera photographs. All three measurements provide consistent results.

Ray, Pradosh K.↗
NASA NTRS1975

An experimental study of jet exhaust simulation

Afterbody drag predictions for jet aircraft are usually made experimentally with the jet exhaust flow simulated. The physical gas properties of the fluid used for the model jet exhaust can affect the accuracy of simulation of the airplane's jet exhaust plume. The effect of the accuracy of this simulation on afterbody drag was investigated by wind-tunnel tests with single engine model. In addition to unheated air as the exhaust gas, the decomposition products of three different concentrations of hydrogen peroxide were utilized. The air jet simulation consistently resulted in higher boattail drag than hydrogen peroxide simulation. The differences in drag for the various exhaust gases are attributed to different plume shapes and entrainment properties of the gases. The largest differences in drag due to exhaust gas properties were obtained for the combination of high transonic Mach numbers and high boattail angles. For these conditions, the current data indicate that the use of air to simulate a nonafterburning turbojet exhaust can result in an increase in afterbody amounting to 20 percent of the nonafterburning turbojet value.

Compton, W. B., III↗
DOE OSTI2020

Analytical model for drag reduction on liquid-infused structured non-wetting surfaces

Liquid-infused structured non-wetting surfaces provide alternating no-slip and partial slip boundary conditions to the fluid flow, resulting in reduced friction at the interface. In this paper, an analytical model is developed for the evaluation of effective slip and, in turn, friction factor and drag reduction on liquid-infused structured non-wetting surfaces. By considering the entire range of anisotropy and heterogeneity of the surface structures as well as the full range of partial slip offered by the infusion liquid, the present model eliminates empirical fitting or correlations that are inherent in previous studies. Based on the effective slip length, drag reduction and skin friction coefficient values for Newtonian flow between two infinite parallel plates and flow in round tubes are presented. Extension of Moody charts for non-wetting surfaces and design maps of surface meso/micro/nano texturing for achieving desired drag reduction are presented for a broad range of engineering applications. The paper further presents independent validation of the model across experimental and computational data from the literature and brings together several previous studies in a unified manner.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Vortical Flows Research Program of the Fluid Dynamics Research Branch

The research interests of the staff of the Fluid Dynamics Research Branch in the general area of vortex flows are summarized. A major factor in the development of enchanced maneuverability and reduced drag by aerodynamic means is the use of effective vortex control devices. The key to control is the use of emerging computational tools for predicting viscous fluid flow in close coordination with fundamental experiments. In fact, the extremely complex flow fields resulting from numerical solutions to boundary value problems based on the Navier-Stokes equations requires an intimate relationship between computation and experiment. The field of vortex flows is important in so many practical areas that a concerted effort in this area is justified. A brief background of the research activity undertaken is presented, including a proposed classification of the research areas. The classification makes a distinction between issues related to vortex formation and structure, and work on vortex interactions and evolution. Examples of current research results are provided, along with references where available. Based upon the current status of research and planning, speculation on future research directions of the group is also given.

Source record↗
DOE OSTI2025

Numerical simulations of liquid jetting with solid inclusions

The dynamics of finite-sized particles in fluids, and their influence on the overall flow, are of great interest across several industrial, environmental, and medical fields. In the context of inkjet printing, the presence of solid inclusions can be either intentional, as in additive manufacturing, or unintentional, as in standard printing processes. These inclusions can strongly impact the jetting process, causing effects such as jet asymmetry, bubble entrapment, and the formation of satellite droplets. Understanding and controlling particle behavior is therefore essential, particularly to predict how and when particles are ejected over multiple jetting cycles. It is therefore critical to develop reliable models that allow for a deeper understanding of the complex interplay between particle and fluid during the whole printing process. To address this, we present a tailored implementation of the Color-Gradient multicomponent Lattice Boltzmann Method for fully resolved three-dimensional (3D) simulations of multicycle liquid jetting with particles. Our method supports realistic parameter settings aligned with industrial inkjet systems, and we provide both qualitative and quantitative validation against experimental data. Additionally, we introduce a simplified model based on the Stokes drag law, in which solid particles are represented as point particles and do not influence the fluid flow. Despite this limitation, the model offers a computationally efficient means to explore the vast parameter space typically encountered in industrial applications, allowing, e.g., identifying critical ejection regions and estimating the number of cycles required for particle release. These qualitative insights are valuable for guiding and complement fully two-way coupled simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Laminar drag reduction in microchannels with liquid infused textured surfaces

Liquid infused surfaces (LIS) achieve non-wetting properties through asperity structures containing pockets of a lubricating liquid rather than air. Although studies have demonstrated several potential applications of LIS, the effect of liquid infused texture on the flow of liquid in microchannels has not been systematically addressed. The present work focuses on the effect of liquid-infused texture geometry and the infused liquid properties on the flow characteristics of a bulk fluid in rectangular and round microchannel geometries. Considering four different textured geometries of transverse ridges, longitudinal ridges, in-lined square posts and staggered squares, a detailed parametric study is presented to assess the resulting drag reduction and friction factor, expressed in terms of the Poiseuille number, on the flow in microchannels. The effect of geometrical parameters is investigated for different asperity solid fraction (Φ s ), asperity height (h s ) and channel thickness (H) or tube diameter (D), while the effect of the infused fluid is studied in terms of a ratio of its viscosity relative to the viscosity of the flowing bulk fluid. Based on the results of the parametric study an extension of the conventional Moody diagram for non-wetting surfaces is developed. Finally, a design of experiments study is conducted to relate the drag reduction and Poiseuille number to the various governing parameters, using which conditions that maximize drag reduction are identified.

42 ENGINEERING↗
NASA NTRS1991

Preferential concentration of particles by turbulence

Direct numerical simulation of isotropic turbulence was used to investigate the effect of turbulence on the concentration fields of heavy particles. The hydrodynamic field was computed using 64-cubed points, and a statistically stationary flow was obtained by forcing the low-wave-number components of the velocity field. The particles used in the simulations were time advanced according to Stokes drag law and were also assumed to be much more dense than the fluid. Properties of the particle cloud were obtained by following the trajectories of 1,000,000 particles through the simulated flow fields. Three values of the ratio of the particle time constant to large-scale turbulence time scale were used in the simulations: 0.075, 0.15, and 0.52. The simulations show that the particles collect preferentially in regions of low vorticity and high strain rate. This preferential collection was most pronounced for particles with the instantaneous number density as much as 25 times the mean value. The fact that dense particles collect in regions of low vorticity and high strain in turn implies that turbulence may actually inhibit rather than enhance mixing of particles.

Squires, Kyle D.↗
NASA NTRS2002

Adjoint-Based, Three-Dimensional Error Prediction and Grid Adaptation

Engineering computational fluid dynamics (CFD) analysis and design applications focus on output functions (e.g., lift, drag). Errors in these output functions are generally unknown and conservatively accurate solutions may be computed. Computable error estimates can offer the possibility to minimize computational work for a prescribed error tolerance. Such an estimate can be computed by solving the flow equations and the linear adjoint problem for the functional of interest. The computational mesh can be modified to minimize the uncertainty of a computed error estimate. This robust mesh-adaptation procedure automatically terminates when the simulation is within a user specified error tolerance. This procedure for estimating and adapting to error in a functional is demonstrated for three-dimensional Euler problems. An adaptive mesh procedure that links to a Computer Aided Design (CAD) surface representation is demonstrated for wing, wing-body, and extruded high lift airfoil configurations. The error estimation and adaptation procedure yielded corrected functions that are as accurate as functions calculated on uniformly refined grids with ten times as many grid points.

Park, Michael A.↗
NASA NTRS2010

Turbulent Output-Based Anisotropic Adaptation

Controlling discretization error is a remaining challenge for computational fluid dynamics simulation. Grid adaptation is applied to reduce estimated discretization error in drag or pressure integral output functions. To enable application to high O(10(exp 7)) Reynolds number turbulent flows, a hybrid approach is utilized that freezes the near-wall boundary layer grids and adapts the grid away from the no slip boundaries. The hybrid approach is not applicable to problems with under resolved initial boundary layer grids, but is a powerful technique for problems with important off-body anisotropic features. Supersonic nozzle plume, turbulent flat plate, and shock-boundary layer interaction examples are presented with comparisons to experimental measurements of pressure and velocity. Adapted grids are produced that resolve off-body features in locations that are not known a priori.

Park, Michael A.↗
NASA NTRSDate not supplied

Numerical Implementation of Source Terms to Evaluate Active Porosity Control using a Transpiration Cooled Thermal Protection System

Transpiration cooling has renewed interest of study as a renewable system of thermal protection for atmospheric entry systems. The presence of coolant within the void space of a porous material changes its effective porosity and theorized to lend the external heatshield as a potential means of porous surface control. Effective porosity is explored in two forms: saturation of void space where exiting coolant creates ‘blowing’ over the surface, and partial evacuation of the void space where withdrawal of the coolant creates ‘suction’ on the surface. Thus this study evaluates using transpiration cooling as a as means of active aerodynamic control. The feasibility of the system is evaluated numerically using Reynolds-averaged Navier Stokes based computational fluid dynamics for the aerodynamic assessments by coding source terms of transpiration cooling products at a heat shield surface boundary at the wind side shoulder, creating an asymmetric scheme. Study results show induced moments about the pitch axis incurred following the source terms of a cooling fluid at a near-shoulder location on the heat shield. Lift and drag saw increasing modulation with increase in mass flux rate. Pitch moment was altered a total of 388 N-m between lowest and highest ‘suction’ rates and changed 194 N-m maximum between ‘blowing’ rates.

transpiration cooling↗
NASA NTRS1990

Microgravity and its effects on residual motions in fluids

The primary reason for conducting many materials science experiments in space is to minimize or eliminate undesirable effects that might result owing to convective motions in fluids that are driven by buoyancy effects. Of particular concern are the low frequency accelerations caused by the Earth's gravity gradient field, spacecraft attitude motions, and atmospheric drag. In order to gain a limited understanding of the effects of these accelerations, researchers calculated the Stokes' motion of a spherical particle in a fluid for various types of spacecraft attitudes. Researchers assessed the effect of slowly rotating the experimental system relative to the spacecraft in order to reduce the rate at which the particles accumulate against the container wall.

Alexander, J. Iwan D.↗
NASA NTRS2010

Summary of the Fourth AIAA CFD Drag Prediction Workshop

Results from the Fourth AIAA Drag Prediction Workshop (DPW-IV) are summarized. The workshop focused on the prediction of both absolute and differential drag levels for wing-body and wing-body-horizontal-tail configurations that are representative of transonic transport air- craft. Numerical calculations are performed using industry-relevant test cases that include lift- specific flight conditions, trimmed drag polars, downwash variations, dragrises and Reynolds- number effects. Drag, lift and pitching moment predictions from numerous Reynolds-Averaged Navier-Stokes computational fluid dynamics methods are presented. Solutions are performed on structured, unstructured and hybrid grid systems. The structured-grid sets include point- matched multi-block meshes and over-set grid systems. The unstructured and hybrid grid sets are comprised of tetrahedral, pyramid, prismatic, and hexahedral elements. Effort is made to provide a high-quality and parametrically consistent family of grids for each grid type about each configuration under study. The wing-body-horizontal families are comprised of a coarse, medium and fine grid; an optional extra-fine grid augments several of the grid families. These mesh sequences are utilized to determine asymptotic grid-convergence characteristics of the solution sets, and to estimate grid-converged absolute drag levels of the wing-body-horizontal configuration using Richardson extrapolation.

Vassberg, John C.↗
NASA NTRS2007

Summary of the Third AIAA CFD Drag Prediction Workshop

The workshop focused on the prediction of both absolute and differential drag levels for wing-body and wing-al;one configurations of that are representative of transonic transport aircraft. The baseline DLR-F6 wing-body geometry, previously utilized in DPW-II, is also augmented with a side-body fairing to help reduce the complexity of the flow physics in the wing-body juncture region. In addition, two new wing-alone geometries have been developed for the DPW-II. Numerical calculations are performed using industry-relevant test cases that include lift-specific and fixed-alpha flight conditions, as well as full drag polars. Drag, lift, and pitching moment predictions from previous Reynolds-Averaged Navier-Stokes computational fluid Dynamics Methods are presented, focused on fully-turbulent flows. Solutions are performed on structured, unstructured, and hybrid grid systems. The structured grid sets include point-matched multi-block meshes and over-set grid systems. The unstructured and hybrid grid sets are comprised of tetrahedral, pyramid, and prismatic elements. Effort was made to provide a high-quality and parametrically consistent family of grids for each grid type about each configuration under study. The wing-body families are comprised of a coarse, medium, and fine grid, while the wing-alone families also include an extra-fine mesh. These mesh sequences are utilized to help determine how the provided flow solutions fair with respect to asymptotic grid convergence, and are used to estimate an absolute drag of each configuration.

Vassberg, John C.↗
NASA NTRS2017

Statistical Analysis of CFD Solutions from the 6th AIAA CFD Drag Prediction Workshop

A graphical framework is used for statistical analysis of the results from an extensive N-version test of a collection of Reynolds-averaged Navier-Stokes computational fluid dynamics codes. The solutions were obtained by code developers and users from North America, Europe, Asia, and South America using both common and custom grid sequences as well as multiple turbulence models for the June 2016 6th AIAA CFD Drag Prediction Workshop sponsored by the AIAA Applied Aerodynamics Technical Committee. The aerodynamic configuration for this workshop was the Common Research Model subsonic transport wing-body previously used for both the 4th and 5th Drag Prediction Workshops. This work continues the statistical analysis begun in the earlier workshops and compares the results from the grid convergence study of the most recent workshop with previous workshops.

Statistical analysis↗
NASA NTRS1978

Multipurpose miniature drag-force anemometer

Simple, rugged, accurate probe measures steady-state and dynamic flow angle, and turbulence intensity in flowing fluids at subsonic velocity. Probe is simpler in design and calibration, and more durable, than hot-wire and hot-film anemometers and is not affected by flow contamination. It is less expensive and complex than laser anemometers. Associated electronics are as simple as those of strain-gage pressure transducers.

Fralick, G. C.↗
NASA NTRS1990

Modeling the dust size distribution in comets with dust fragmentation

A hydrodynamic model was developed of a spherically symmetric dusty gas flow in a cometary atmosphere assuming a single fluid, inviscid, perfect gas. The hydrodynamics for gas and dust, which involves the gas drag force (momentum transfer), heat exchange between gas and dust, photodissociation energy for H2O gas, and radiative heating and cooling terms for dust particles, are solved using the Gear method for stiff, coupled differential equations. Calculations were done with a dust size distribution for radii alpha = 0.01 micron to 10 cm with densities variable with the size. A nucleus size of 4.0 km radius with a density of 0.5 g/cu cm and a total dust-to-gas mass ratio chi = 1 was adopted. There are indications from in situ observations that dust particle fragment into smaller ones. Fragmentation of dust particles was incorporated into the model. This is done by adding source and sink terms in the continuity equations for the dust. Lifetimes for the decay of dust particles were assumed as a function of particle size. It is also assumed that dust particles always fragment only into the next smaller size.

Konno, Ichishiro↗
NASA NTRS2008

Spectral Attenuation of Sound in Dilute Suspensions with Nonlinear Particle Relaxation

Previous studies on the sound attenuation in particle-laden flows under Stokesian drag and conduction-controlled heat transfer have been extended to accommodate the nonlinear drag and heat transfer. It has been shown that for large particle-to-fluid density ratio, the particle Reynolds number bears a cubic relationship with (omega(tau))(sub d) (where omega is the circular frequency and (tau)(sub d) the Stokesian particle relaxation time). This dependence leads to the existence of a peak value in the linear absorption coefficient occurring at a finite value of(omega(tau))(sub d). Comparison of the predictions with the test data for the spectral attenuation of sound with water injection in a perfectly expanded supersonic air jet shows a satisfactory trend of the theory accounting for nonlinear particle relaxation processes.

Kandula, Max↗
NASA NTRS2008

Spectral Attenuation of Sound in Dilute Suspensions with Nonlinear Particle Relaxation

Theoretical studies on the dissipation and dispersion of sound in two-phase suspensions have been briefly reviewed. Previous studies on the sound attenuation in particle-laden flows under Stokesian drag and conduction-controlled heat transfer have been extended to accommodate the nonlinear drag and heat transfer. It has been shown that for large particle-to-fluid density ratio, the particle Reynolds number bears a cubic relationship with Omega Tau(sub d) (where Omega is the circular frequency and Tau(sub d) the Stokesian particle relaxation time). This dependence leads to the existence of a peak value in the linear absorption coefficient occurring at a finite value Omega Tau (sub d). Comparison of the predictions with the test data for the spectral attenuation of sound with water injection in a perfectly expanded supersonic air jet shows a satisfactory trend of the theory accounting for nonlinear particle relaxation processes.

Kandula, M.↗