Search NASA⌕ Search

SEARCH · Search NASA

Results for “GROUND STATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

PREDICTS

PREDICTS is a computer program that predicts the frequencies, as functions of time, of signals to be received by a radio science receiver in this case, a special-purpose digital receiver dedicated to analysis of signals received by an antenna in NASA s Deep Space Network (DSN). Unlike other software used in the DSN, PREDICTS does not use interpolation early in the calculations; as a consequence, PREDICTS is more precise and more stable. The precision afforded by the other DSN software is sufficient for telemetry; the greater precision afforded by PREDICTS is needed for radio-science experiments. In addition to frequencies as a function of time, PREDICTS yields the rates of change and interpolation coefficients for the frequencies and the beginning and ending times of reception, transmission, and occultation. PREDICTS is applicable to S-, X-, and Ka-band signals and can accommodate the following link configurations: (1) one-way (spacecraft to ground), (2) two-way (from a ground station to a spacecraft to the same ground station), and (3) three-way (from a ground transmitting station to a spacecraft to a different ground receiving station).

Zhou, Hanying↗

Propagation mechanism of daytime Pc 3-4 pulsations observed at synchronous orbit and multiple ground-based stations

Observational data obtained during the last two decades show that the amplitude of daytime Pc 3-4 magnetic pulsations is controlled by the solar wind conditions. The high degree of correlation between the solar wind parameters and Pc 3-4 pulsations in the dayside magnetosphere suggests that the ultimate cause of the daytime Pc 3-4 pulsations must be the interaction of the solar wind with the earth's magnetosphere. The present paper is concerned with details regarding the control of the properties of the Pc 3-4 pulsations by the solar wind parameters, taking into account observations made at multiple ground-based stations. It is attempted to establish the relation between the daytime Pc 3-4 pulsations at the ground stations and the compressional Pc 3-4 waves in the magnetosphere. Attention is given to the most probable propagation mechanism of the daytime Pc 3-4 pulsations in the magnetosphere.

Yumoto, K.↗

A guide to onboard checkout. Volume 7: RF communications

The radio frequency communications subsystem for a space station is considered, with respect to onboard checkout requirements. The subsystem comprises all equipment necessary for transmitting and receiving, tracking and ranging, command, multiple voice and television information, and broadband experiment data. The communications subsystem provides a radio frequency interface between the space station and ground stations, either directly or indirectly, through a data relay satellite system, independent free-flying experiment modules, and logistics vehicles. Reliability, maintenance, and failure analyses are discussed, and computer programming techniques are presented.

Source record↗

Future exploration of Mars

Scientific study of Mars after Viking will focus on the following areas: planetary formation from the solar nebula, internal development, interaction with its atmosphere and with the interplanetary medium, and biological history (if any). Four basic measurement modes are outlined to pursue these areas of investigation. They are: orbital, especially polar orbits with wide area surface, atmospheric, and magnetospheric studies; in situ, which include bio-, geo-, and meteorological surface ground stations; network, using separated ground stations and, possibly, RPV aircraft; and sample-return. Various vehicle concepts for the different study modes are described.

Minear, J.↗

Measuring Highly Elliptical Orbits Using The GPS

Report discusses precise determination of highly elliptical orbits of spacecraft around Earth, by use of one of following techniques: (1) conventional two-way Doppler tracking of spacecraft from ground stations, (2) conventional two-way Doppler tracking from ground stations augmented by tropospheric-delay calibrations obtained at ground stations by simultaneous tracking of navigation satellites of Global Positioning System (GPS), or (3) method of item 2 augmented further by GPS tracking from GPS flight instrument aboard spacecraft. Analysis applies especially to scientific satellites carrying radio telescopes.

Lichten, Stephen M.↗

International data transfer for space very long baseline interferometry

Space very long baseline interferometry (SVLBI) experiments using a TDRSS satellite have successfully demonstrated the capability of using spacecraft to extend the effective baseline length of VLBI observations beyond the diameter of the Earth, thereby improving the resolution for imaging of active galactic nuclei at centimeter wavelengths. As a result, two spacecraft dedicated to SVLBI, VSOP (Japan) and RadioAstron (Russia), are scheduled to be launched into high Earth orbit in 1996 and 1997. The success of these missions depends on the cooperation of the international community in providing support from ground tracking stations, ground radio telescopes, and correlation facilities. The timely exchange and monitoring of data among the participants requires a well-designed and automated international data transfer system. In this paper, we will discuss the design requirements, data types and flows, and the operational responsibilities associated with the SVLBI data transfer system.

Wiercigroch, Alexandria B.↗

NanoSat constellation mission design

The NanoSat constellation concept mission proposes simultaneous operation of multiple swarms of as many as 22 identical 10 kg spacecraft per swarm. The various orbits in a NanoSat swarm vary from 3x5 to 3x42 R(sub e) in geometry. In this report the unique flight dynamics issues of this constellation satellite mission design are addressed. Studies include orbit design, orbit determination, and error analysis. A preliminary survey determined the orbital parameters that would yield a 100 minute shadow condition maximum while providing adequate ground station access for three ground stations.

Concha, Marco↗

NanoSat Constellation Mission Design

The NanoSat constellation concept mission proposes simultaneous operation of multiple swarms of as many as 22 identical 10 kg spacecraft per swarm. The various orbits in a NanoSat swarm vary from 3x12 to 3x42 R(sub e) in geometry. In this report the unique flight dynamics issues of this constellation satellite mission design are addressed. Studies include orbit design, orbit determination, and error analysis. A preliminary survey determined the orbital parameters that would limit the maximum shadow condition while providing adequate ground station access for three ground stations.

Concha, Marco↗

Mars Constellation Design

In this study, several different Mars constellation designs were evaluated. Various figures of merit were used to examine constellation configurations in order to optimize the performance of Mars Network. Plots were also obtained in order to make a clear comparison of the various figures of merit. In the following analysis, six figures of merit were used in the comparison (average time to achieve a 1 meter fix, maximum time to achieve a 1 meter fix, maximum wait time between satellite sightings, percent of time a satellite is in view, percent of cases to achieve a 1 meter fix in 10 minutes, and percent of cases to achieve a 1 meter fix in 1 hour). For the communication figures of merit (maximum wait time between satellite sightings and percent of time a satellite is in view), an initial run over a period of 10 days was used to produce the data. For the remaining figures of merit, the simulation was first restarted at least 100 times over a period of 1000 Earth days. Each time the simulation was continued until a 1 meter fix was achieved at all stations. The ground station grid was spaced 20 deg in longitude and 5 deg in latitude. In order to obtain the following graphs the values were first averaged over longitude and then an average of the positive and negative latitude values was made (i.e., -90 deg lat and 90 deg lat were averaged). In each case, the resulting figures of merit are shown. For some cases, the difference between the given case and the 'Eagles 2 Satellites' case is also given.

Source record↗

Towards Sheaf Theoretic Analyses for Delay Tolerant Networking

The goal of Delay Tolerant Networking (DTN) is to take a collection of heterogeneous, disparate connections between satellites, space assets, ground stations, and ground infrastructure and bring it together into a cohesive, functioning overlay network. Depending on the systems being considered, one can find links with a one-way light time exceeding minutes (and hours),periodic links which can sometimes be predicted by orbital mechanics, and restrictions based on the variety of capabilities built into these systems. These characteristics preclude traditional network models and routing techniques and have classically led to either rigid routing tables or purely probabilistic models. As the deeper underlying structures remain unknown, development of more DTN-optimized algorithms has lacked the necessary foundation. In a continuation of previous work, the goal of this paper is to identify and study these fundamental structures that exist in delay tolerant networks (DTN), with a focus on space networks. The current routing methodology has been to use contact graph routing (CGR) algorithms. CGR models a series of known contacts as a static graph. For CGR to work, this graph must be globally consistent and must have an accurate picture of the network. Because this is a globally controlled structure, there is little room for flexibility in the event of changes to the network which would naturally occur as the network grows. As a response to the desire for flexibility as the network changes, we introduced the mathematical structure known as sheaves to DTNs last year. The tag-line for sheaves is that they are a mathematically precise way of gluing local data together into unique global data. Thus, sheaves lend extra power to traditional models(and routing algorithms) by taking additional information and merging it, in as consistent a manner as possible, with the representation itself. The clearest example of how Earth-bound networks exhibit behavior that is “sheafy” is link state routers, which build a local-to-global picture of their network by gluing local information together into a global network, exactly as a sheaf would do. For routing within delay tolerant networks to truly exploit this structure, a deeper structure than a graph is required. In this paper, we develop sheaves that can work over directed graphs such as temporal flow networks, we construct a sheaf representation for Dijkstra’s algorithm, and we outline a construction for routing sheaves capable of modeling multicast scenarios. Finally, there is a section of future work suggesting follow-on research.

Robert Short↗

A Comparison of TOMS Version 8 Total Column Ozone Data with Data from Groundstations

The Nimbus-7 and Earth Probe Total Ozone Mapping Spectrometer (TOMS) data have been reprocessed with a new retrieval algorithm, (Version 8) and an updated calibration procedure. These data have been systematically compared to total ozone data from Brewer and Dobson spectrophotometers for 73 individual ground stations. The comparisons were made as a function of latitude, solar zenith angle, reflectivity and total ozone. Results show that the accuracy of the TOMS retrieval'is much improved when aerosols are present in the atmosphere, when snow/ice and sea glint are present, and when ozone in the northern hemisphere is extremely low. TOMS overpass data are derived from the single TOMS best match measurement, almost always located within one degree of the ground station and usually made within an hour of local noon. The version 8 Earth Probe TOMS ozone values have decreased by an average of about 1% due to a much better understanding of the calibration of the instrument. The remaining differences between TOMS and ground stations suggest that there are still small errors in the TOMS retrievals. But if TOMS is used as a transfer standard to compare ground stations, the large station-to-station differences suggest the possibility of significant instrument errors at some ground stations.

Labow, G. J.↗

Interferometric locating system

A system is described for determining the position of a vehicle or other target that emits radio waves and which is of the type that senses the difference in time of arrival at spaced ground stations of signals from the vehicle to locate the vehicle on a set of intersecting hyperbolas. A network of four ground stations detects the radio emissions from the vehicle and by means of cross correlation derives the relative signal delay at the ground stations from which the vehicle position is deduced. Because the signal detection is by cross correlation, no knowledge of the emission is needed, which makes even unintentional radio noise emissions usable as a locator beacon. By positioning one of the four ground stations at an elevation significantly above the plane of the other three stations, a three dimensional fix on the vehicle is possible.

Macdoran, P. F.↗

ERTS operations and data processing

The overall communications and data flow between the ERTS spacecraft and the ground stations and processing centers are generally described. Data from the multispectral scanner and the return beam vidicon are telemetered to a primary ground station where they are demodulated, processed, and recorded. The tapes are then transferred to the NASA Data Processing Facility (NDPF) at Goddard. Housekeeping data are relayed from the prime ground stations to the Operations Control Center at Goddard. Tracking data are processed at the ground stations, and the calculated parameters are transmitted by teletype to the orbit determination group at Goddard. The ERTS orbit has been designed so that the same swaths of the ground coverage pattern viewed during one 18-day coverage cycle are repeated by the swaths viewed on all subsequent cycles. The Operations Control Center is the focal point for all communications with the spacecraft. NDPF is a job-oriented facility which processes and stores all sensor data, and which disseminates large quantities of these data to users in the form of films, computer-compatible tapes, and data collection system data.

Gonzales, L.↗

Remote sensing of severe convective storms

The Tibet Plateau significantly affects the initiation and development of heavy rainfall and severe storms in China, just as the Rocky Mountains influence local severe storms in the United States. The study shows that the heavy rainfall in the Plateau area is usually preceded by a high growth rate of the convective clouds, followed by a rapid collapse of the cloud top. The study also shows that the tops of the convective clouds associated with heavy rainfall over the Plateau usually lie between the altitude of the two tropopauses which exist over the Plateau. There is good agreement between the collapsing of the cloud as observed from the satellite imagery, and the beginning of the rainfall observed by the ground stations and also between the dissipation of the cloud observed from the satellite infrared imagery, and the ending of the rainfall, observed by the ground stations. Comparison of the volumetric dissipation of clouds per unit area over the location of the ground station with the rainfall recorded at that station shows a linear relationship for rainfall mounts exceeding 8 mm. The ratio of observed rainfall at the ground station over the satellite observed cloud volume dissipation per unit area was also computed. The result shows that the ratio is almost constant with the value of 9.55 mm/(pixel . km/pixel) for rainfall amounts exceeding 15 mm; and the variation is less then 10 percent for rainfall mounts between 8 and 15 mm. Needless to say, further investigation is required to verify this ratio.

Hung, R. J.↗

Commanding Constellations (Pipeline Architecture)

Providing ground command software for constellations of spacecraft is a challenging problem. Reliable command delivery requires a feedback loop; for a constellation there will likely be an independent feedback loop for each constellation member. Each command must be sent via the proper Ground Station, which may change from one contact to the next (and may be different for different members). Dynamic configuration of the ground command software is usually required (e.g. directives to configure each member's feedback loop and assign the appropriate Ground Station). For testing purposes, there must be a way to insert command data at any level in the protocol stack. The Pipeline architecture described in this paper can support all these capabilities with a sequence of software modules (the pipeline), and a single self-identifying message format (for all types of command data and configuration directives). The Pipeline architecture is quite simple, yet it can solve some complex problems. The resulting solutions are conceptually simple, and therefore, reliable. They are also modular, and therefore, easy to distribute and extend. We first used the Pipeline architecture to design a CCSDS (Consultative Committee for Space Data Systems) Ground Telecommand system (to command one spacecraft at a time with a fixed Ground Station interface). This pipeline was later extended to include gateways to any of several Ground Stations. The resulting pipeline was then extended to handle a small constellation of spacecraft. The use of the Pipeline architecture allowed us to easily handle the increasing complexity. This paper will describe the Pipeline architecture, show how it was used to solve each of the above commanding situations, and how it can easily be extended to handle larger constellations.

Tim Ray↗

Eye Glance Behaviors of Ground Control Station Operators in a Simulated Urban Air Mobility Environment

Research into concepts such as advanced air mobility (AAM) and urban air mobility (UAM) offers an opportunity for successfully and safely adding new classes of vehicles into the National Airspace System. However, a need exists for research into the human factors associated with these concepts. In this paper, we evaluate the gaze behaviors of three remote ground control station operators (GCSOs) conducting simulated UAM operations. The participants monitored and controlled an unmanned aircraft system (UAS) from pre-flight to landing using ground control station (GCS) software across nine scenarios within a remote UAS operations center at NASA Langley Research Center (LaRC). As this work was exploratory, descriptive statistics were calculated to provide some initial insight into GCSO gaze patterns associated with the GCS display. Scenarios that required the operator to directly interact with an airspace scheduling system off-screen resulted in fewer on-screen glances than scenarios that did not include direct interactions with the off-screen system. After investigating several areas of interest (AOIs) within the GCS display, participants primarily viewed three AOIs: the map, vehicle status, and operations checklist. The results yielded several GCS design and operational improvement recommendations to include: (a) adding altitude information to the vehicle icon, (b) adding additional traffic information, and (c) including additional GCS training, to reduce the need to scan an operations checklist, which would allow allocation of visual attention towards other AOIs.

Urban Air Mobility↗

LANDSAT D: X-band analysis study

The effects of the use of an X-band carrier frequency on the transmission link margins and on the affected ground station equipment are investigated. The specific effects of the X-band carrier frequency allocation on the link margin are detailed. This includes an examination of a Local User Terminal's (LUT) coverage circle radius requirements, detailed elements of the link calculation, and specific spacecraft and ground configurations that would satisfy the link requirements. The requirements that spacecraft signal acquisition and tracking place on the front-end of the ground station equipment are also examined. The availability of the required ground station equipment and representative costs for these items are included. The costs considered shall be both for procurement of a new ground station (front-end only) and for modification of an existing S-band station to X-band.

Alexander, L.↗

Use of satellites to determine optimum locations for solar power stations

Ground measurements of solar radiation are too sparse to determine important mesoscale differences that can be of major significance in solar power station locations. Cloud images in the visual spectrum from the SMS/GOES geostationary satellites are used to determine the hourly distribution of sunshine on a mesoscale in the continental United States excluding Alaska. Cloud coverage and density as a function of time of day and season are considered through the use of digital data processing techniques. Low density cirrus clouds are less detrimental to solar energy collection than other types; and clouds in the morning and evening are less detrimental than those during midday hours of maximum insolation. The seasonal geographic distributions of sunshine are converted to Langleys of solar radiation received at the earth's surface through the use of transform equations developed from long-term measurements of these two parameters at 18 widely distributed stations. The high correlation between measurements of sunshine and radiation makes this possible. The output product will be maps showing the geographic distribution of total solar radiation on the mesoscale which is received at the earth's surface during each season.

Hiser, H. W.↗