Search NASA⌕ Search

SEARCH · Search NASA

Results for “Glass transition temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Spray coating for washout tooling by binder jet additive manufacturing

We report washout tooling is a process in which a removable mold or fixture is disintegrated using a solvent. Binder Jet (BJ) additive manufacturing holds promise for creating customized washout molds from common materials. BJ-based washout tooling provides an advanced strategy in manufacturing fiber-reinforced composites (FRCs), especially for customized hollow FRCs. However, washout tools formed by BJ require an impermeable barrier between the porous tooling surface and the parts laid up on the surface to prevent the resin from infiltrating the tooling surface and bonding the tool to the FRC. The conventional method for preventing resin migration into the washout mold from the FRC is winding Teflon® tape over the entire surface, which is labor-intensive and very difficult to deploy for specific geometries. Here, we report the development of a polymer spray coating method to seal the tooling surface and prevent resin infiltration without affecting the washout properties needed for sacrificial tooling. Two water-soluble polymers, poly(sodium 4-styrenesulfonate) (PSS–Na) and poly(vinylsulfonic acid, sodium salt) (PVS–Na), were investigated for spray coating. PVS-Na maintained tighter geometric tolerances and provided excellent thermal stability with the onset of decomposition at 320 °C and glass transition temperature of 280 °C. Spray coating with PVS-Na streamlines the process of forming a protective layer for the washout molds by BJ, reduces migration of the resins from the FRC, and significantly improves the production efficiency of complex washout tools.

42 ENGINEERING↗
DOE OSTI2023

Degradation in interfacial shear strength of carbon fiber/ vinyl ester composites due to long-term exposure to seawater using push-out tests

Here, in this study, single fiber (~7-μm diameter) push-out tests are conducted to evaluate hygrothermal effects on the interfacial shear strength (IFSS) of carbon fiber/vinyl ester (CF/VE) composites. Hygrothermal conditioning is achieved by saturating samples in simulated seawater at 40 °C for two years. An investigation has been conducted on the preparation, validity, and interpretation of the push-out test results. First, the authors present a polishing methodology that results in thin films of CF/VE composites in the thickness range of 15–120 μm and produces an average 41.2% drop in IFSS due to long-term hygrothermal exposure. Using scanning electron microscopy (SEM), we show that during the push-out tests, the failure initiates locally at the zone of minimum bond strength at the bottom (away from the indenter), then propagates along the length of the interface. The influence of radial tensile stresses originating due to bending is found to be negligible. Using the SEM imaging of the pushed-out fibers, we validate the failure of the interface to be the primary source of failure. The associated results are found to depend on the thickness of the interface. We then reevaluate the results using the Weibull distribution, knowing that the failure mechanism is analogous to the weakest link theory. The results show a 25.5% drop in the IFSS of the CFVE composite, measured at an infinitesimal scale due to long-term to hygrothermal conditioning at 40 °C. A significant drop in IFSS was observed after reheating above glass transition temperature (T g ) and cooling.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure-performance relationships in lignin-based transesterification vitrimers: The role of lignin structural features

Lignin has been hailed as an ideal renewable alternative for petrochemical-based prepolymers in material synthesis for a sustainable and circular economy, due to its abundant aromatic network and high carbon content. However, the properties and performance of lignin-derived macromolecules are strongly influenced by the lignin itself. While numerous studies have explored the impact of lignin content on the thermomechanical performance of lignin-based vitrimers, literature on how the inherent structural features of lignin affect these properties is scanty. In this study, hardwood organosolv lignin was fractionated in ethyl acetate, ethanol, and acetone to obtain lignin fractions with varying structural characteristics. These fractions were then modified through carboxylation and crosslinked with epoxidized soybean oil (ESO) at a hydroxyl to epoxy group ratio of 1:1 to produce lignin-based transesterification vitrimers (LVs). The thermal properties (i.e. glass transition temperature and thermal stability), tensile strength, storage modulus, and stress relaxation behavior of the LVs were studied and carefully related to the structural features of lignin. The results revealed a positive relationship between strong hydroxyl content in modified lignin and the tensile strength (5.10–9.71 MPa), storage modulus (1099.4 – 1372.8 MPa), crosslinking density, and stress relaxation of the LVs. Additionally, both the storage modulus and tensile strength exhibited a positive relationship with the ratio of rigid linkages in modified lignin, while lignin molecular weight was found to significantly impact the thermal properties of LVs (i.e Tg and thermal stability). This study not only highlights the valorization of lignin in vitrimer synthesis but also provide insights for designing lignin-based materials with tailored properties for specific applications.

Bio-based polymer↗
DOE OSTI2020

Ionic complexation of endblock-sulfonated thermoplastic elastomers and their physical gels for improved thermomechanical performance

Thermoplastic elastomers (TPEs) composed of nonpolar triblock copolymers constitute a broadly important class of (re)processable network-forming macromolecules employed in ubiquitous commercial applications. Physical gelation of these materials in the presence of a low-volatility oil that is midblock-selective yields tunably soft TPE gels (TPEGs) that are suitable for emergent technologies ranging from electroactive, phase-change and shape-memory responsive media to patternable soft substrates for flexible electronics and microfluidics. Many of the high-volume TPEs used for these purposes possess styrenic endblocks that are inherently limited by a relatively low glass transition temperature. To mitigate this shortcoming, we sulfonate and subsequently complex (and physically crosslink) the endblocks with trivalent Al3+ ions. Doing so reduces the effective hydrophilicity of the sulfonated endblocks, as evidenced by water uptake measurements, while concurrently enhancing the thermomechanical stability of the corresponding TPEGs. Chemical modification results, as well as morphological and property development, are investigated as functions of the degree of sulfonation, complexation and TPEG composition. (C) 2020 Published by Elsevier Inc.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Wood-reinforced composites by stereolithography with the stress whitening behavior

In this study, poplar wood flour at various concentrations (1–10 wt%) is incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using stereolithography apparatus (SLA) 3D printing. Differential scanning calorimetry (DSC) along with Fourier transform infrared spectroscopy (FTIR) analysis shows the presence of a small amount of residual monomer in the printed samples. For the printed composites, the glass transition temperature (T g ) from dynamic mechanical analysis (DMA) decreases as more wood flour is incorporated, which indicates an increase in free volume occupied by polymer chains. The tensile strength is improved up to 17.3% from 21.1 MPa (no wood flour) to 24.7 MPa (1.0 wt% wood flour). The highest Young’s modulus reaches 323.8 MPa (2.0 wt% wood flour), which is 1.9-fold of that of the sample without wood flour. Moreover, the composites show “stress whitening” with the addition of wood flour during the uniaxial drawing. Morphology analysis of the tested samples show that the formation of microcraze and microvoids likely causing the stress whitening. This is the first study that demonstrates wood flour can be utilized in SLA 3D printed wood plastic composites (WPC) which can reinforce the printed products with a modest loading amount.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exploring pressure-dependent inelastic deformation and failure in bonded granular composites: An energetic materials perspective

In polymer-filled granular composites, damage may develop in mechanical loading prior to material failure. Damage mechanisms such as microcracking or plastic deformation in the binder phase can substantially alter the material’s mesostructure. For energetic materials, such as solid propellants and plastic bonded explosives, these mesostructural changes can have far reaching effects including degraded mechanical properties, potentially increased sensitivity to further insults, and changes in expected performance. Unfortunately, predicting damage is nontrivial due to the complex nature of these composites and the entangled interactions between inelastic mechanisms. In this work, we assess the current literature of experimental knowledge, focusing on the pressure-dependent shear response, and propose a simple simulation framework of bonded particles to study four limiting-case material formulations at both meso- and macro-scales. Further, to construct the four cases, we systematically vary the relative interfacial strength between the polymer binder and granular filler phase and also vary the polymer’s glass transition temperature relative to operating temperature which determines how much the binder can plastically deform. These simulations identify key trends in global mechanical response, such as the emergence of strain hardening or softening regimes with increasing pressure which qualitatively resemble experimental results. By quantifying the activation of different inelastic mechanisms, such as bonds breaking and plastically straining, we identify when each mechanism becomes relevant and provide insight into potential origins for changes in mechanical responses. The locations of broken bonds are also used to define larger, mesoscopic cracks to test various metrics of damage. We primarily focus on triaxial compression, but also test the opposite case of triaxial extension to highlight the impact of Lode angle on mechanical behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gas transport characteristics of supramolecular networks of metal-coordinated highly branched Poly(ethylene oxide)

Model systems are developed and investigated to better understand the effect of polyether-metal ion interactions on gas separation characteristics. These systems help answer current questions raised by the substantial body of research on metal-organic frameworks (MOFs) dispersed in polyethers to improve gas separation performance, where favorable interactions between the metal centers and polyethers are preferred to improve interfacial compatibility. Specifically, we investigate CO 2 /gas transport properties of supramolecular networks comprising cross-linked poly(ethylene oxide) (XLPEO) and dissociable salts, including LiClO 4 , Ni(BF 4 ) 2 , and Cu(BF 4 ) 2 . Increasing the salt content increases the glass transition temperature (T g ) and generally decreases gas diffusivity and permeability, which can be successfully described using a T g -integrated free volume model with an expression similar to the Vogel-Tammann-Fulcher (VTF) equation. Surprisingly, low loadings of LiClO 4 and Cu(BF 4 ) 2 (2 mass% or less) can increase gas permeability by 30%–70% without affecting the CO 2 /gas selectivity. This increase correlates with polyether-metal ion dynamics as measured by dielectric spectroscopy. Understanding how interaction-mediated dynamics affect gas transport will be instrumental to designing MOF-based mixed matrix materials for gas separations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Superior CO 2 /N 2 separation performance of highly branched Poly(1,3 dioxolane) plasticized by polyethylene glycol

With its high content of CO 2 -philic ether oxygen groups, poly(1,3-dioxolane) (PDXLA) has emerged as an attractive platform to achieve excellent CO 2 /N 2 separation properties for post-combustion carbon capture. Herein we demonstrate that the separation properties of PDXLA can be further enhanced by plasticizing with miscible polyethylene glycol (PEG)-based additives using an integrated experimentation and modeling approach. The effects of the chain end groups and loading level of the additives on the physical properties of the blends are thoroughly investigated, including glass transition temperature (T g ), fractional free volume, and gas transport properties, and the effects can be satisfactorily described using models available for homogeneous blends. Notably, a T g -integrated free volume model is adapted to successfully interpret the unified effect of the blend composition and temperature on gas diffusivity and permeability. A sample containing 45 mass% PEG dimethyl ether (PEGDME with a molecular mass of 240 g/mol) displays stable mixed-gas CO 2 permeability of 1540 Barrer and CO 2 /N 2 selectivity of 40 when challenged with a model flue gas at 60 °C, outperforming Robeson's 2008 upper bound. Elucidating how small plasticizers impact gas transport in homogeneous blends may unravel a facile way to design high-performance membranes for gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Machine learning-guided discovery of polymer membranes for CO 2 separation with genetic algorithm

Designing polymer membranes with high gas permeability and selectivity is a difficult multi-task constrained problem due to the trade-off between these two properties. In this work, we present a machine learning (ML) driven genetic algorithm to tackle the design problem of polymer membranes for CO 2 separation from N 2 and O 2 . Using literature data of permeability for three gases, we constructed multiple ML models with different fingerprinting featurization schemes to predict gas permeabilities. Then, we employed a genetic algorithm to design new polymers and evaluated their performance using our ML models. We were able to identify new polymer membranes that are promising for both CO 2 /N 2 and CO 2 /O 2 separations. Further, the top discovered polymers are predicted to have high glass transition temperatures. Similarly, the pyridine functionality was found in ≈20% of the predicted polymers. This framework can be used to design polymers for any application involving constrained optimization. Finally, we outlined the challenges and opportunities with using ML guided data-driven inverse design of polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Highly thermally stable copolymers of epoxy and trifunctional polybenzoxazine

Here, in this work, we report the copolymerization of a triamine-based benzoxazine and a commercial difunctional epoxy resin, and investigate their synergistic effect on improved thermal properties using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Results showed that a glass transition temperature increase of up to 268 °C was obtained for the copolymer with as low as 25 wt% epoxy. A higher thermal performance was also achieved with an onset degradation of nearly 400 °C and char yield of 39 wt% at 800 °C for the copolymer with 52 wt% epoxy. The behavior was compared to previously reported benzoxazine/epoxy combinations and was found to be advantageous. The curing behavior of different copolymer compositions was also investigated via DSC and a methodology for matching each peak with its corresponding reaction was developed. Results showed that the alternating favorability of the reactions was dependent on the benzoxazine/epoxy ratio. Overall, the prepared PBZ/epoxy copolymers displayed higher thermal stability than their individual components, indicating suitability for a number of potential extended uses including utility in higher temperature applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

On electron beam-induced degradation of vinyl ester thermosets

We have demonstrated that electron beam radiolysis induces scissions of the C-O-C bonds along the backbone of the chains of unsaturated polyester thermosets of different compositions based on dicyclopentadiene, isophthalic acid, epoxy vinyl ester, and terephthalic acid. The radiolysis is imminent irrespective of the degree of crosslinking in the thermosets both in neat resins and in the presence of solvents. Electron Paramagnetic Resonance (EPR) results show the formation of the alkoxyl radicals and C-centered radicals as the primary intermediate products of the C-O-C scissions. While the alkoxyl radicals of these resins exhibit very good stability even six months after the irradiation, the C-centered radicals decay very rapidly via their reactions with oxygen that is available either as adsorbed in the resins, dissolved in solvents or from the environment. The radiolytically produced •OH radicals in the unsaturated-ester aqueous solutions play a major role in inducing scissions on the backbone of the polymer chains. The solvated electrons (e s ) from organic solvents, such as dimethyl sulfoxide and isopropyl alcohol, also induce direct scission of the C-O-C bonds, giving rise to the formation of alkoxyl radicals and C-centered radicals. However, a considerable fraction of es is scavenged by the dissolved O 2 to produce O 2 - . Despite the radiation-induced scissions, irradiation of the resins at a dose level of 1000 kGy results in an increase of the glass transition temperature, Tg. This is due to the simultaneous radiation-induced polymerization of the vinyl monomers, toluene, and styrene that are present in the resins. The increase in Tg is observed in all the resins except for the terephthalic polyester resin in aqueous solution, in which the absence of these monomers results in Tg decreasing sharply with irradiation. This work demonstrates that ionizing radiation triggers continuous free radical-chain reactions that lead to the formation of recyclable oligomers.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Thermo-mechanical deterioration and molecular degradation of 3D-printed methacrylate-based polymer in various chemical environments

The advancement of additive manufacturing (AM) has accelerated the development of stereolithographic (SLA) photo-curable resins, particularly methacrylate-based polymers, due to the ability to their high-resolution, robust mechanical properties, and suitability. However, their long-term performance in chemical environments remains poorly understood. This study investigates the extent and mechanisms of degradation on an SLA-printed methacrylate-based polymer subjected to various chemicals, including polar and non-polar solvents, as well as strongly acidic aqueous solutions over a 12-week accelerated aging period. A comprehensive analytical approach incorporating swelling kinetics, surface morphology, tensile and dynamic mechanical analysis (DMA), Fourier-transform infrared (FTIR) spectroscopy, and mass spectrometry (MS) was employed to characterize chemical absorption, structural integrity, and leached products. Results reveal that degradation severity is governed by both the polarity and reactivity of the chemical environment. Notably, exposure to 6 mol L -1 HNO₃ induced the most severe deterioration, with over threefold higher swelling compared to other media, and significant reductions in tensile strength, tensile modulus, and glass transition temperature (T g ). In contrast, specimens aged in non-polar solvents (xylene and dodecane) exhibited negligible chemical interaction and retained mechanical performance. FTIR and MS analyses identified acid-catalyzed hydrolysis of ester groups as prominent degradation pathways in acidic media, while diffusion-controlled plasticization prevailed in polar solvents. Furthermore, this study provides valuable insights into the chemical stability of SLA-printed polymers and develops predictive degradation profiles that are crucial for designing durable polymer systems for advanced industrial use.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Free volume manipulation of a 6FDA-HAB polyimide using a solid-state protection/deprotection strategy

We report tert-butoxycarbonyl (t-BOC) is a thermally labile moiety that can be used to protect hydroxyl groups on polymers. In this study, t-BOC was appended onto a polyimide consisting of 2,2'-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3'-dihydroxy-4,4'-diamino-biphenyl (HAB), after which the polymer was formed into self-standing films. Solid-state thermal treatments were performed to systematically remove t-BOC moieties to alter the physical packing structure and concomitant gas transport properties of the polymer. Despite performing deprotection reactions well below the glass transition temperature of 6FDA-HAB (~300 °C), this free volume manipulation (FVM) approach produced only subtle differences in polymer density, fractional free volume, average free volume element size, and gas transport properties relative to the unprotected polymer. While these findings suggest that thermally removing covalently bound functional groups from polymer films can be used to manipulate free volume and gas transport performance for glassy polymers, more robust polymer systems than linear polyimides are required to preserve the nascent free volume architecture generated from this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Aqueous buffer solution-induced crystallization competes with enzymatic depolymerization of pre-treated post-consumer poly (ethylene terephthalate) waste

In this paper, the complex relationship between kinetics and substrate morphology during enzymatic depolymerization of melt processed poly(ethylene terephthalate) (PET) is explored and the effects of competing transformations are analyzed. Extruded PET substrates from post-consumer recycled PET (RPET) bottles flakes subjected to enzymatic depolymerization are examined to reveal increases in crystallinity from ~10% post-extrusion to >30% after 3 days of depolymerization as well as increases in glass transition temperature (T g ) from ~66°C to > 80°C. Further investigation into this behavior shows that post-extrusion RPET substrates do not exhibit changes in crystallinity when subjected to dry annealing at 65°C in an oven over 7 days, but they do experience annealing in depolymerization buffer solution with no enzymes at 65°C within 3 days. This difference may be attributed to plasticization of PET in the presence of water, also known as solvent induced crystallization. The impact of this plasticized annealing behavior is demonstrated by subjecting RPET substrates to increasing enzyme-to-substrate loads. As enzyme load increases, overall conversion of substrates increases despite crystallinity also increasing to similar levels regardless of the initial enzyme loading. The competition between depolymerization and crystallization suggests that the rate at which PET substrates are depolymerized at the operational temperature is integral to achieving high conversion to monomeric product. This, in turn, also suggests that savings from lowered enzyme loadings may be more detrimental than helpful in pursuing the most cost-effective recycling systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Isomerization kinetics of azobenzene crosslinked to a liquid crystal polymer network

Azobenzene is an important chromophore having numerous applications that are a direct implication of its ability to change shape upon irradiation with a suitable wavelength. Here, in this study, photoisomerization kinetics of a diacrylate azobenzene molecule (A3MA) cross-linked to a liquid crystal polymer network (LCN) is investigated. Isomerization experiments were conducted on planar LCN thin films with varying cross-linking densities for a fixed azobenzene concentration. The experiments were conducted at approximately 26 °C, which is significantly below each film’s glass transition temperature. The forward trans-cis and reverse cis-trans isomerization slows down in crosslinked azobenzene liquid crystal polymer networks (ALCNs) as compared to a solution and an uncrosslinked polymer mixture. The observed slowdown is due to the reduction in the free volume and increased steric hindrances with an increase in crosslinking. A single-term first-order kinetics rate equation is known to describe the isomerization kinetics in solutions or uncrosslinked mixtures while the same form fails to represent the reaction kinetics in moderate to highly cross-linked ALCNs. Our results for the first time indicate that a two-term first-order reaction rate is an accurate way to describe the forward trans-cis and reverse thermal cis-trans isomerization in crosslinked azobenzene liquid crystal polymer networks. In addition, the effect of film thickness and incident intensities on the reaction kinetics is investigated. Finally, the two-term isomerization kinetics is incorporated into a finite element photo-chemo-mechanical model to reveal the consequent slowdown in the actuation response of ALCN films. The current findings will be of particular interest to theoreticians and experimentalists alike, for it will help predict and understand accurately the responses of azobenzene-based coatings, and actuators and may have potential applications in underwater soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

3D printing of a recycled copolyester of terephthalic acid, cyclohexanedimethanol and tetramethylcyclobutanediol

2,2,4,4-Tetramethyl-1,3-cyclobutanediol (TMCD) is a diol monomer for terephthalic acid (TPA) class of copolyesters that can increase the glass transition temperature and mechanical strength in comparison to conventional TPA polyesters. TMCD-modified poly (1,4-cyclohexylenedimethylene terephthalate) (PCTT) has been used to manufacture consumer products with good toughness, heat resistance and clarity. However, the suitability of PCTT in 3D printing had not been evaluated. Therefore, consumer plasticware was used as the starting material to investigate the suitability of this copolyester for fused deposition modeling (FDM). Here, chemical structure, mechanical properties, thermal behavior and viscoelastic properties of this copolyester were studied. NMR spectroscopy found that the copolyester had cyclohexanedimethanol (CHDM) and TMCD contents at 76.5 mol% and 20 mol% of total diol, respectively. 280 °C printing temperature and 110 °C bed temperature were suitable conditions for printing. T g of PCTT was 103 °C (25 °C higher than PETG). Young's modulus and impact strength of printed PCTT were at least 100% and 65% higher than printed PETG, respectively. The ease of printing, superior mechanical properties and T g (103 °C) make the PCTT random copolyester highly applicable in additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing physicochemical, bioactive, and nutritional properties of sweet potatoes: Ultrasonic contact drying with slot jet nozzles compared to hot-air drying and freeze drying

Sweet potatoes are a rich source of nutrients and bioactive compounds, but their quality can be impacted by the drying process. This study investigates the impact of slot jet reattachment (SJR) nozzle and ultrasound (US) combined drying (SJR + US) on sweet potato quality, compared to freeze-drying (FD), SJR drying, and hot air drying (HAD). SJR + US drying at 50 °C closely resembled FD in enhancing quality attributes and outperformed HAD and SJR in key areas such as rehydration, shrinkage ratios, and nutritional composition. Notably, SJR + US at 50 °C produced the highest total starch (36.84 g/100 g), total dietary fiber (8.48 g/100 g), total phenolic content (158.19 mg GAE/100 g), total flavonoid content (119.08 mg QE/g), DPPH antioxidant activity (6.44 μmol TE/g), β-carotene (31.98 mg/100 g), and vitamin C (5.27 mg/100 g). It also exhibited higher glass transition temperatures (Tg: 14.49 °C), indicating better stability at room temperature. The hardness values for SJR + US samples were similar to FD, while HAD samples had the highest hardness. SJR + US at 50 °C resulted in the lowest total color changes (ΔE), indicating minimal impact on appearance. Additionally, FTIR analysis revealed that peaks in specific spectral regions indicated superior preservation of bioactive compounds in SJR + US samples compared to other methods, which was also confirmed by principal component analysis (PCA) and heatmap visualization. Overall, these findings suggest that SJR + US is an effective alternative to conventional drying techniques, significantly improving the quality of dried sweet potatoes.

Color↗
DOE OSTI2022

Production of β-ketoadipic acid from glucose in Pseudomonas putida KT2440 for use in performance-advantaged nylons

Biomass-derived chemicals can offer unique chemical functionality relative to petroleum-derived building blocks. To this end, here we report that β-ketoadipic acid (βKA), a C6 diacid with a β-ketone group, can be used as a performance-advantaged replacement for adipic acid in a nylon-6,6 analog. Building on our previous efforts to produce shikimate-derived products from carbohydrates, Pseudomonas putida KT2440 is engineered to produce βKA from glucose, achieving a 26 g/L titer. Following purification, βKA imparts an increase of 69 degrees C above the nylon-6,6 glass transition temperature and 20% reduced water permeability, equivalent to nylon-6,10. Molecular simulations predict that the enhanced thermal properties result from rigidity introduced by the β-ketone. Process analysis predicts that βKA can be produced for US$1.94/kg from sugars, requiring 63% less energy and emitting 43% less greenhouse gases than fossil-based adipic acid. Overall, this study illustrates the potential for βKA to serve as a useful building block for bio-based polymers.

09 BIOMASS FUELS↗