Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite R&D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The properties of novel bisimide amine cured epoxy/Celion 6000 graphite fiber composites

The study is concerned with the further development of bisimide amine cured epoxy resins first reported by Serafini et al. (1979). Attention is given to properties of the neat resins and composites made with these novel epoxy resins and Celion 6000 graphite fibers. The use of bisimide amine hardeners to cure epoxy resins causes a significant improvement in the char-forming characteristics of the cured resin. Compared to epoxy resins cured with a conventional amine, such as 4,4'-diaminodiphenylsulfone, the bisimide cured epoxies exhibit about a twofold improvement in the aerobic char yield at 800 C. The levels of moisture absorption exhibited by the bisimide amine cured epoxies were found to be considerably lower than those exhibited by state-of-the-art epoxies (0.5 wt.% versus 2.0%).

Scola, D. A.↗
NASA NTRS1995

Operating capability and current status of the reactivated NASA Lewis Research Center Hypersonic Tunnel Facility

The NASA Lewis Research Center's Hypersonic Tunnel Facility (HTF) is a free-jet, blowdown propulsion test facility that can simulate up to Mach-7 flight conditions with true air composition. Mach-5, -6, and -7 nozzles, each with a 42 inch exit diameter, are available. Previously obtained calibration data indicate that the test flow uniformity of the HTF is good. The facility, without modifications, can accommodate models approximately 10 feet long. The test gas is heated using a graphite core induction heater that generates a nonvitiated flow. The combination of clean-air, large-scale, and Mach-7 capabilities is unique to the HTF and enables an accurate propulsion performance determination. The reactivation of the HTF, in progress since 1990, includes refurbishing the graphite heater, the steam generation plant, the gaseous oxygen system, and all control systems. All systems were checked out and recertified, and environmental systems were upgraded to meet current standards. The data systems were also upgraded to current standards and a communication link with NASA-wide computers was added. In May 1994, the reactivation was complete, and an integrated systems test was conducted to verify facility operability. This paper describes the reactivation, the facility status, the operating capabilities, and specific applications of the HTF.

Thomas, Scott R.↗
NASA NTRS2009

Carbon Raman Spectroscopy of 36 Inter-Planetary Dust Particles

Carbon Raman spectroscopy is a useful tool to determine the degree of order of organic material (OM) in extra-terrestrial matter. As shown for meteoritic OM [e.g., 2], peak parameters of D and G bands are a measure of thermal alteration, causing graphitization (order), and amorphization, e.g. during protoplanetary irradiation, causing disorder. Th e most pristine interplanetary dust particles (IDPs) may come from comets. However, their exact provenance is unknown. IDP collection during Earth?s passage through comet Grigg-Skjellerup?s dust stream ("GSC" collectors) may increase the probability of collecting fresh IDPs from a known, cometary source. We used Raman spectroscopy to compare 21 GSC-IDPs with 15 IDPs collected at different periods, and found that the variation among GSC-IDPs is larger than among non-GSC IDPs, with the most primitive IDPs being mostly GSC-IDPs.

Busemann, H.↗
DOE OSTI1989

Nuclear Safety [Vol. 30, No. 3, July-September 1989]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 325 Safety of Framatome Advanced Nuclear Steam Supply Systems Designs by J. A. Charles and D. Lange, 333 Book Review of Nuclear Accidents: Intervention Levels for the Protection of the Public by H. B. Piper; ACCIDENT ANALYSIS: 335 Living PRA Computer Systems by S. C. Dinsmore and H.-P. Balfanz, 343 Summary of ICAP Assessments of RELAP5/MOD2 by W. E. Driskell and R. G. Hanson; CONTROL AND INSTRUMENTATION: 352 Thermal Performance Monitoring System at Maanshan Nuclear Power Plant by H.-J. Chao, Y.-P. Lin, G.-H. Jou, L.-Y. Liao, and Y.-B. Chen; DESIGN FEATURES: 358 Warning Systems for Nuclear Power Plant Emergencies by J. H. Sorensen and D. S. Mileti; WASTE AND SPENT FUEL MANAGEMENT: 371 Activities Related to Waste Management Compiled by E G. Silver; OPERATING EXPERIENCES: 382 Steam Generator Tube Performance: Experience with Water-Cooled Nuclear Power Reactors During 1985 by O. S. Tatone and R. L. Tapping, 400 Systems Interaction Analyses: Concepts and Techniques (Part II) by M. D. Muhlheim and G. A. Murphy, 413 Reactor Shutdown Experience Compiled by J. W. Cletcher, 416 Operating U.S. Power Reactors Compiled by E G. Silver; RECENT DEVELOPMENTS: 440 General Administrative Activities Compiled by E G. Silver, 460 Reports, Standards, and Safety Guides by D. S. Queener, 466 Status of Power-Reactor Licensing Activities Compiled by E G. Silver, 470 Proposed Rule Changes as of Mar. 31, 1989; ANNOUNCEMENTS: 334 Proceedings Published, 351 CEC Seminar on Methods and Codes for Assessing the Off-Site Consequences of Nuclear Accidents, 357 Short Course on Multiphase Flow and Heat Transfer: Bases and Applications in A: The Nuclear Power Industry B: The Process Industries, 357 International Conference on Probabilistic Safety Assessment and Management, 478 International Topical Meeting on the Safety, Status, and Future of Non-Commercial Reactors and Irradiation Facilities, 475 The Authors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1983

Spacecraft materials research: A NASA perspective

This paper reviews NASA's spacecraft materials research program. This is a multicenter program and includes research in the following areas: space environmental effects on materials, low expansion composites, fatigue and fracture of composites, thermal control coatings, and contamination. Research to date has concentrated on current graphite-reinforced composites and polymer systems, and developing analytical models to explain observed changes in mechanical, physical, and optical properties. As a result of these research efforts, new experimental facilities have been developed to simulate the space environment and measure the observed property changes. Chemical and microstructural analyses have also been performed to establish damage mechanisms and the limits for accelerated testing. The implications of these results on material selection and system performance are discussed, and additional research needs and opportunities in the area of tougher resin/matrix and metal/matrix composites are identified.

Tenny, D. R.↗
DOE OSTI2025

Structure and spectroscopy of graphite monofluoride

The structure of graphite monofluoride, (CF) n , has been debated since its discovery in 1934. In this work, we investigate a commercial graphite monofluoride by vibrational spectroscopy (infrared, Raman and the first inelastic neutron scattering spectra of this material). The spectroscopy shows that the material contains unreacted graphite and the partially fluorinated product dicarbon fluoride, (C 2 F) n , We evaluate the previously proposed $P\bar{6}m2$ and $P\bar{3}m1$ structures using computational methods and find F···F contacts render the $P\bar{6}m2$ structure dynamically unstable. We propose two alternative structures, $Cmc2_1$ $P6_3mc$, generated by displacement of one layer relative to another and find that $Cmc2_1$ is also dynamically unstable. The calculations are validated by comparison of calculated and observed INS spectra

Density functional theory↗
DOE OSTI2025

Machine Learning to Select Experiments Driven by Fundamental Science and Applications for Targeted Nuclear Data Improvement

This work describes a blueprint for a process that accelerates progress in science by quantitatively answering the following question: What is the optimal combination of fundamental-science and application-driven experiments to maximally reduce pertinent data uncertainties? Answering this question entails solving a high-dimensional and complex optimization problem that is best solved with advanced statistic techniques often classified as machine learning. We apply this process within the framework of nuclear data with the aim to select an experiment combination that will reduce uncertainties in 239 Pu nuclear data for neutron energies between 1 and 600 keV. In this field, fundamental-physics driven data, called differential, look at one nuclear physics observable at a time. They are contrasted to application-driven, integral, data where one or few resulting values inform a broad set of nuclear data across several nuclides and energies. The candidates for integral experiments are criticality measurements that were refined by a genetic algorithm to be maximally sensitive to 239 Pu fission cross sections in the desired energy range. Twenty-three candidate differential experiments were investigated and span multiple nuclear physics observables (e.g., total, capture cross sections) for isotopes appearing in the integral experiments. The optimal combination among these candidate experiments was investigated via generalized least squares fitting, augmented with Gaussian processes to ameliorate statistical irregularities in data, and the D-optimality criterion. The latter evaluates for each pair of candidates the joint reduction in uncertainties of all 12200 nuclear data appearing in the integral experiments compared to the knowledge we have from 168 past experiments, theory, and nuclear data. We chose as differential measurements those that investigate 63 Cu and 239 Pu total cross sections, based on D-optimality rank and feasibility constraints. Two integral (criticality) experiments were selected: An experiment with Al 2 ⁢O 3 and graphite interleaved with Pu and a thick Cu reflector explores 1–30 keV, while we target the 30–600 keV range with an experiment that swaps boron in place of graphite with a different geometry.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1977

Solar silicon via improved and expanded metallurgical silicon technology

A completed preliminary survey of silica sources indicates that sufficient quantities of high-purity quartz are available in the U.S. and Canada to meet goals. Supply can easily meet demand for this little-sought commodity. Charcoal, as a reductant for silica, can be purified to a sufficient level by high-temperature fluorocarbon treatment and vacuum processing. High-temperature treatment causes partial graphitization which can lead to difficulty in smelting. Smelting of Arkansas quartz and purified charcoal produced kilogram quantities of silicon having impurity levels generally much lower than in MG-Si. Half of the goal was met of increasing the boron resistivity from 0.03 ohm-cm in metallurgical silicon to 0.3 ohm-cm in solar silicon. A cost analysis of the solidification process indicate $3.50-7.25/kg Si for the Czochralski-type process and $1.50-4.25/kg Si for the Bridgman-type technique.

Hunt, L. P.↗
NASA NTRSDate not supplied

Revisiting the Origin of Macromolecular Carbon (MMC) in Lunar Basalts 15556 & 10044

Volatile elements influence the geo-chemical evolution of planetary bodies and they are in magmas at every stage, from melting within planetary interiors to eruption at the surface. Analyses of lunar mare basalts supported the hypothesis that lunar mag-mas were depleted in volatiles (H-C-F-Cl-S), relative to their terrestrial analogs [1]. Nevertheless, several early studies of samples returned during the Apollo program proposed that the mare basalt eruptions, including the “fire fountain” eruptions, were propelled by the oxidation of magmatic graphite to CO (and/or CO2) gas [2, 3]. Seminal studies during the 1970’s measured the bulk concentration and isotopic compositions of C from Apollo 11 samples, and identified several carbonaceous compounds, including: (a) gaseous (CO, CO2, and traces of CH4), (b) metallic carbide, and (c) potentially elemental carbon [4-6]. These studies reported a relatively broad range of C contents (~100-400 μg/g) and isotopic values (δC13 = -30 to +20), and suggested that these heterogeneities can be explained by contribution from multiple factors, including: (a) indigenous carbon, (b) solar wind implantation, (c) bombardment and/or meteorite impact, and (d) terrestrial contamination [5,6]. However, unequivocal observations of magmatic graphite in lunar basalts have never been made. Macromolecular carbon (MMC)—graphitic carbon varying from nearly amorphous to highly crystalline varieties—was identified as inclusions hosted by igneous pyroxenes from Martian meteorites and were attributed to being indigenous to Mars [8]. The authors carefully considered the textural and mineralogical relationship of the MMC phases, and concluded that the subset of MMC located within and/or adjacent to cracks, or at a disrupted surface (e.g., cut) were most consistent with terrestrial contamination. The near absence of con-firmed instances of lunar magmatic MMC within the literature [9], combined with the wide range of isotopic values and bulk carbon contents measured in lunar bas-alts begs the question as to whether previously measured carbon is of an indigenous origin, or the result of terrestrial contamination. Using Raman spectroscopy, we have observed MMC in lunar basalts subjected to different forms of anthropogenic modification related to sample preparation including polished sections, sawn surfaces, and fractured surfaces adjacent to sawn sur-faces. We have observed MMC of unknown origin in all of these settings. Here we report the preliminary textural and spectroscopic characteristics of MMC hosted within the groundmass of Apollo 15 (15556) and Apollo 11 basalts (10044) as part of our ongoing investigation of the origin of these carbonaceous materials.

lunar↗
NASA NTRS1985

Composite materials for space structures

Composite materials have been extensively used for spacecraft structures because of their unique combination of high specific strength and stiffness, low weight, good dimensional stability, and high specific damping capacity. High-modulus graphite reinforced epoxies have been the principal composite material system used. For early applications composites were selected primarily to reduce weight. However, the development of high precision structures such as The Space Telescope required high modulus composites with a coefficient of thermal expansion close to zero to meet design requirements. The use of advanced composites for space structures is reviewed in this paper. Barriers likely to limit further applications of composites are discussed and highlights of current research to improve composites are presented. New developments Jn composites technology which could impact future spacecraft systems are also reviewed.

Composites↗
DOE OSTI2024

ENDF/B-VIII.1: Thermal Neutron Scattering Sublibrary

The thermal neutron scattering law (TSL) sublibrary aims to describe the interaction of incident neutrons at thermal or sub-thermal energies with different compound materials such fuels, moderators and special-purpose materials. In ENDF/B-VIII.1 there was a large number of new and updated TSL evaluations, including traditional moderators (light water, Beryllium metal, Beryllium Oxide, Calcium Hydride, plastics (Polystyrene and Lucite), graphite (reactor-grade and crystalline), anhydrous Hydrogen Fluoride, and heavy paraffinic oil); exotic moderators (Beryllium Carbide, Zirconium Hydride, Yttrium Hydride, Lithium-7 Hydride and Deuteride), FLiBe molten salt, structural materials and cladding (Silicon Carbide, Silicon Dioxide, Zirconium Carbide), fuels (Plutonium Dioxide, Uranium Carbide, Uranium metal, Uranium Nitride, Uranium Dioxide, Uranium Hydride), and special purpose materials. In ENDF/B-VIII.1 we also distribute alongside the evaluated files, a comma-separated file (CSV), named TSL_MAT_numbers.csv, which lists all evaluated files in the current release and their corresponding unique MAT number.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1985

Homogeneity of pristine and bromine intercalated graphite fibers

Wide variations in the resistivity of intercalated graphite fibers and to use these materials for electrical applications, their bulk properties must be established. The homogeneity of the diameter, the resistivity, and the mass density of 50 graphite fibers, before and after bromine intercalation was measured. Upon intercalation the diameter was found to expand by about 5%, the resistivity to decrease by a factor of five, and the density to increase by about 6%. Each individual fiber was found to have uniform diameter and resistivity over macroscopic regions for lengths as long as 7 cm. The ratio of pristine to intercalated resistivity increases as the pristine fiber diameter increases at a rate of 0.16 micron, but decreases with the increasing ratio of intercalated diameter to pristine diameter at a rate of 0.08.

Gaier, J. R.↗
DOE OSTI2024

Modeling Reversible Volume Change in Automotive Battery Cells with Porous Silicon Oxide-Graphite Composite Anodes

Automotive battery manufacturers are working to improve the individual cell and overall pack design by increasing durability, performance, and range, while reducing cost, and active material volume change is a key aspect that needs to be considered during this design process. Recently, silicon oxide-graphite composite anodes are being explored to increase total anode capacity while maintaining a tolerable amount of cell level reversible volume expansion due to the relatively lower reversible volume change of the silicon oxide compared to pure battery grade or metallurgical grade silicon. To predict the blended anode response and contribution to the overall cell volume change, we integrated the mechanical behavior of the individual active materials with the multi-species, multi-reaction model to predict the state-of-lithiation of the active materials in the cell at a given potential. The resulting simulations illustrate the tradeoff in volume change between the silicon oxide and the graphite during cell operation. This type of modeling approach will allow designers to virtually consider the impact of cell level and pack level design changes on overall system mechanical performance for automotive and grid storage applications, namely that relatively small addition of silicon containing materials can drive a significant increase in the volume change at the cell level, as demonstrated by the 5 wt% addition of silicon oxide accounting for half of the overall volume change in the cell.

Garrick, Taylor R. (ORCID:0000000322518129)↗
NASA NTRS1980

The 737 graphite composite flight spoiler flight service evaluation

The flight service experience of 111 graphite-epoxy spoilers on 737 transport aircraft and related ground based enviromental exposure of graphite-epoxy material specimens is reported. Spoilers were installed on 28 aircraft representing seven major airlines operating throughout the world. Over 1,188,367 spoiler flight hours and 1,786,837 spoiler landings were accumulated by this fleet. Tests of removed spoilers and ground-based exposure specimens after the fifth year of service indicate modest changes in composite strength properties. Two incidents of trailing edge delamination with subsequent core corrosion were observed. Based on visual, ultrasonic, and destructive testing, there has been no evidence of moisture migration into the honeycomb core and no core corrosion.

Hoffman, D. J.↗
NASA NTRS1988

The effects of fluids in the aircraft environment on a polyetherimide

Fluid absorption studies have been made for a polyetherimide thermoplastic film and a unidirectional composite of the thermoplastic with graphite fibers immersed in water. JP4 jet fuel, ethylene glycol, and hydraulic fluid. The changes in the weight, thickness, and tensile properties were measured for the film. The changes in the flexural properties of the composite were measured for specimens whose fiber orientation was transverse to their length. Only the hydraulic fluid, which caused an erosion or dissolving of the resin at the specimen surface, affected the film's properties. Both the water and the hydraulic fluid affected the flexural properties of the composite, due to capillary absorption along the fiber-resin interface.

Long, Edward R., Jr.↗
NASA NTRS1980

Thermal expansion of composites using Moire interferometry

An experimental technique for precise measurement of the thermal response of fiber-reinforced composite materials uses moire interferometry with fringe multiplication which yield a sensitivity of 833 nm (32.8 mu in.) per fringe. Results from the technique are compared with those obtained from electrical resistance strain gages, and also those predicted from classical lamination theory. Temperature dependent coefficients of thermal expansion for composite materials subjected to thermal cycling in the temperature range of 297 K (75 F) to 422 K (300 F) were determined for four laminate configurations (0, 90, 0/ + or - 45/90 sub s and 0/90/ + or - 45 sub s) of T300/5208 graphite epoxy, and ranged from -0.107 mu epsilon K/1 (-0.059 mu epsilon deg F/-) for the 0 laminate to 32.18 mu epsilon K/1 (17.88 mu epsilon F/1) for the 90 laminate. Moisture was found to greatly influence the thermal response of a quasi-isotropic laminate, resulting in hysteresis and residual compressive strain as the moisture content was reduced. Comparisons between moire and strain gage measurements were inconclusive with both techniques giving consistent but systematically different results. Differences of as much as 29% were observed.

Bowles, D. E.↗
NASA NTRS1986

Seam bonding of graphite reinforced composite panels

An account is given of the design features and operating characteristics of a method for the joining of composite parts, at a rate of 2 to 6 inches/min, in which the heating process responsible for adhesive flow at 800 F is focused upon the overlapped seam. The heating element is a self-tuning solid state power oscillator whose ferrite's toroid geometry generates a uniform, concentrated magnetic flux in the component to be bonded. Specimens cut from graphite/epoxy panels bonded with epoxy-phenolic adhesive by this process have exhibited average lap-shear strengths of the order of 3400 lbs/sq in.

Buckley, John D.↗
NASA NTRS1989

Fiber optic strain measurements in filament-wound graphite-epoxy tubes containing embedded fibers

Filament-wound graphite-epoxy tubes fabricated with embedded fiber optic sensors were tested at NASA Langley Research Center to evaluate the feasibility of monitoring stress with a fiber optic technique. Resistance strain gauges were attached to the tubes to measure strain at four locations along the tubes. Both static and dynamic strain measurements were made with an excellent agreement between the embedded fiber optic strain sensor and the strain gauges. The results indicate that fiber optic sensors embedded in composites may be useful as the sensing component of smart structures.

Rogowski, R. S.↗