Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Status of Chronic Oxidation Studies of Graphite

Graphite will undergo extremely slow, but continuous oxidation by traces of moisture that will be present, albeit at very low levels, in the helium coolant of HTGR. This chronic oxidation may cause degradation of mechanical strength and thermal properties of graphite components if a porous oxidation layer penetrates deep enough in the bulk of graphite components during the lifetime of the reactor. The current research on graphite chronic oxidation is motivated by the acute need to understand the behavior of each graphite grade during prolonged exposure to high temperature chemical attack by moisture. The goal is to provide the elements needed to develop predictive models for long-time oxidation behavior of graphite components in the cooling helium of HTGR. The tasks derived from this goal are: (1) Oxidation rate measurements in order to determine and validate a comprehensive kinetic model suitable for prediction of intrinsic oxidation rates as a function of temperature and oxidant gas composition; (2) Characterization of effective diffusivity of water vapor in the graphite pore system in order to account for the in-pore transport of moisture; and (3) Development and validation of a predictive model for the penetration depth of the oxidized layer, in order to assess the risk of oxidation caused damage of particular graphite grades after prolonged exposure to the environment of helium coolant in HTGR. The most important and most time consuming of these tasks is the measurement of oxidation rates in accelerated oxidation tests (but still under kinetic control) and the development of a reliable kinetic model. This report summarizes the status of chronic oxidation studies on graphite, and then focuses on model development activities, progress of kinetic measurements, validation of results, and improvement of the kinetic models. Analysis of current and past results obtained with three grades of showed that the classical Langmuir-Hinshelwood model cannot reproduce all data collected so far. Starting from here we propose a modification of the LH model to include temperature activation of graphite surface as a Boltzmann activation function. The enhanced Boltzmann-Langmuir-Hinshelwood model (BLH) was tested successfully on three grades of graphite. The model is a robust, comprehensive mathematical function that allows better fitting of experimental results spanning a wide range of temperature and partial pressures of water vapor and hydrogen. However, the model did not fit satisfactorily the data extracted from the old report on graphite H-451 oxidation by water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast Charging of Li-Ion Cells: Part V. Design and Demonstration of Protocols to Avoid Li-Plating

Fast charging of Li-ion batteries would make “fueling” of electric vehicles comparable in time to fueling of gasoline-powered cars, increasing consumer appeal of the new technology. Taking the US Department of Energy goal of safe 6 C charging to 80% capacity as a guide, we describe approaches that can mitigate Li plating on the graphite anode. To make this possible, a variable-rate anode potential charging protocol has been implemented by using a microprobe reference electrode to continuously monitor and adjust the current, in this way avoiding low anode potentials that favor Li deposition. Various implementations of the anode potential control are considered using electrochemical modeling and compared with the experimental data. For charge to 80% capacity at 30 °C, an average C-rate of 4.97 C was obtained for an NCM523/graphite cell with 70 μ m thick graphite electrode and 7.40 C for a cell with 47 μ m thick graphite electrode. Our electrochemical model accounts for these observations and provides a means to extrapolate the approach to other cell designs and operation regimes, drawing the maximum average fast charging rates that can still avoid Li plating.

25 ENERGY STORAGE↗

Highly Ordered Hierarchical Anodes for Extreme Fast Charging Batteries (Final Report)

The goal of this project is to enable extreme fast charging (XFC) of Li-ion batteries, which was accomplished through a combination of 1) rational design and manufacturing of hierarchically structured anode architectures; 2) blending graphite/hard carbon into a bulk hybrid anode; 3) engineering artificial solid-electrolyte interphase (SEI) coatings with reduced interphase impedance; 4) computational modeling of coupled transport, kinetic, and electrochemical phenomena; and 5) improved fundamental understanding of lithium plating through operando analysis. This work integrated structural, compositional, and surface modification of graphite anodes, multi-physics modeling of ion transport, electrochemical activity, and heat transfer, advanced strategies to detect Li plating, and semi-automated roll-to-roll cell assembly. The unique facilities at the University of Michigan (UM) and Sandia National Laboratories (SNL) were leveraged to manufacture, prototype, and characterize commercially relevant >2Ah and >180 Wh/kg cells with a target of <20% capacity fade over 500 XFC cycles.

25 ENERGY STORAGE↗

Analysis of formation of primary radiation-induced point defects in graphite under action of secondary neutrons and {pi}{sup -}-mesons generated in various channels of nuclear reactions upon graphite irradiation by 450-GeV protons

A theoretical model is constructed and the rates of formation are calculated for primary radiation-induced point defects in graphite by secondary neutrons and {pi}{sup -}-mesons generated in various nuclear reaction channels upon irradiation of graphite by a 450-GeV proton beam. Calculations are performed using the ENDF-VII nuclear data base for energies of secondary particles lower than 150 MeV. It is shown that neutrons produce the highest generation rate of point radiation-induced defects in graphite (the rate of formation of defects under the action of neutrons is an order of magnitude higher than the corresponding value for {pi}{sup -}-mesons).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantifying Volume Change in Porous Electrodes via the Multi-Species, Multi-Reaction Model

Automotive manufacturers are working to improve individual cell and overall pack design by increasing their performance, durability, and range, while reducing cost; and active material volume change is one of the more complex aspects that needs to be considered during this process. As the time from initial design to manufacture of electric vehicles is decreased, design work that used to rely solely on testing needs to be supplemented or replaced by virtual methods. As electrochemical engineers drive battery and system design using model-based methods, the need for coupled electrochemical/mechanical models that take into account the active material change utilizing physics based or semi-empirical approaches is necessary. In this study, we illustrated the applicability of a mechano-electrochemical coupled modeling method considering the multi-species, multi-reaction model as popularized by Verbrugge and Baker. To do this, validation tests were conducted using a computer-controlled press apparatus that can control the press displacement and press force with precision. The coupled MSMR volume change model was developed and its applicability to graphite and NMC cells was illustrated. The increased accuracy of the model considering the coupled MSMR volume change approach shows in the importance of accounting for individual gallery volume change behavior on cell level predictions.

25 ENERGY STORAGE↗

Uncertainty Quantification of Calculated Temperatures for the U.S. Capsules in the AGR-2 Experiment

A series of Advanced Gas Reactor (AGR) irradiation experiments are being conducted within the Advanced Reactor Technology (ART) Fuel Development and Qualification Program. The main objectives of the fuel experimental campaign are to provide the necessary data on fuel performance to support fuel process development, qualify a fuel design and fabrication process for normal operation and accident conditions, and support development and validation of fuel performance and fission product transport models and codes (PLN-3636). The AGR-2 test was inserted in the B-12 position in the Advanced Test Reactor (ATR) core at Idaho National Laboratory (INL) in June 2010 and successfully completed irradiation in October 2013, resulting in irradiation of the TRISO fuel for 559.2 effective full power days (EFPDs) during approximately 3.3 calendar years. The AGR-2 data, including the irradiation data and calculated results, were qualified and stored in the Nuclear Data Management and Analysis System (NDMAS) (Pham and Einerson 2014). To support the U.S. TRISO fuel performance assessment and to provide data for validation of fuel performance and fission product transport models and codes, the daily as-run thermal analysis has been performed separately on each of four AGR-2 U.S. capsules for the entire irradiation as discussed in (Hawkes 2014). The ABAQUS code’s finite element-based thermal model predicts the daily average volume-average fuel temperature and peak fuel temperature in each capsule. This thermal model involves complex physical mechanisms (e.g., graphite holder and fuel compact shrinkage) and properties (e.g., conductivity and density). Therefore, the thermal model predictions are affected by uncertainty in input parameters and by incomplete knowledge of the underlying physics leading to modeling assumptions. Therefore, alongside with the deterministic predictions from a set of input thermal conditions, information about prediction uncertainty is instrumental for the ART program decision-making. Well defined and reduced uncertainty in model predictions helps increase the quality of and confidence in the AGR technical findings.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Oxidation Kinetics by Water Vapor of Nuclear Graphite Grade 2114

This report presents measurement results of oxidation rates by water vapor of nuclear graphite grade 2114 manufactured by Mersen, USA. This report completes kinetic study of chronic oxidation of grade 2114, of which partial data were compiled as a Letter Report in July 2017. The research is part of a broader program at Oak Ridge National Laboratory (ORNL) aiming at development of a comprehensive model for chronic oxidation of nuclear graphite in conditions relevant to operation of gas-cooled high-temperature reactors (HTGR). Grade 2114 is the fourth nuclear graphite investigated under this program. Experimental data measured at ORNL were analyzed in collaboration with Dr. Robert Mee (University of Tennessee, Knoxville) and graphite-specific parameters in the oxidation rate equation were determined. It was shown, once again, that the new Boltzmann-enhanced Langmuir-Hinshelwood (BLH) model recently proposed by ORNL is a better choice than the classical Langmuir-Hinshelwood (LH) model for prediction of chronic oxidation of graphite components during normal operation of HTGRs.

36 MATERIALS SCIENCE↗

Experimental Plan for EDF Energy Creep Rabbit Graphite Irradiations- Rev. 2 (replaces Rev. 0 ORNL/TM/2013/49)

The experimental results obtained here will assist in the development and validation of future models of irradiation induced creep of graphite by providing the following data: Inert creep stain data from low to lifetime AGR fluence Inert creep-property data (especially CTE) from low to lifetime AGR fluence Effect of oxidation on creep modulus (by indirect comparison with experiment 1 and direct comparison with experiment 3 NB. Experiment 1 and 3 are not covered here) Data to develop a mechanistic understanding, including: appropriate creep modulus (including pinning and high dose effects on structure), investigation of CTE-creep strain behavior under inert conditions oInformation on the effect of applied stress/creep strain on crystallite orientation (requires XRD), effect of creep strain on micro-porosity (requires tomography & microscopy) This document describes the experimental work planned to meet the requirements of project technical specification and EDF Energy requests for additional Pre-IE work. The PIE work is described in detail in this revision (Section 8 and 9).

Burchell, Timothy D.↗

Effects of Boron and Graphite Uncertainty in Fuel for TREAT Simulations

Advanced modeling techniques and current computational capacity make full core TREAT simulations possible, with the goal of such simulations to understand the pre-test core and minimize the number of required calibrations. But, in order to simulate TREAT with a high degree of precision the reactor materials and geometry must also be modeled with a high degree of precision. This paper examines how uncertainty in the reported values of boron and graphite have an effect on simulations of TREAT.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of SAM Code Capabilities for Safety Analysis of GCR Air-ingress Events

Air-ingress following a depressurized loss-of-forced-cooling (DLOFC) event is a challenging, multiphysics safety scenario for High-Temperature Gas-Cooled Reactors (HTGRs), involving coupled gas composition transport, buoyancy-driven flow redistribution, graphite oxidation, and structural heat-up. Despite its importance — air ingress is a key scenario identified in the PIRT process for the HTGRs — existing system-level safety codes have lacked the integrated capability to simulate the complete event sequence with high confidence. This report documents the development, validation, and demonstration of three new capabilities in the SAM code to address this gap: (1) a multi-component gas mixture flow model with binary diffusion to track the helium-air composition and its effect on system density and flow; (2) a 0-D graphite oxidation model based on the Roes correlation, including oxygen consumption and exothermic heat release; and (3) an isentropic critical flow model for accurate representation of primary system depressurization through a break. These capabilities are validated against two benchmark experiments. The NSTF heavy-gas ingress experiment validates the multi-component flow model: SAM correctly reproduces the rapid buoyancydriven flow stagnation and subsequent natural circulation recovery driven by composition-dependent density changes. The NACOK graphite oxidation experiment validates the oxidation model: SAM predicts a bottom-level graphite weight loss of 25%, in close agreement with the measured 24%, and reproduces the strong axial nonuniformity and block-geometry dependence of oxidation, at a level comparable to the SPECTRA and TINTE codes. The validated capabilities are then exercised together in an integrated, reactor-scale simulation of a DLOFC air-ingress transient in a simplified HTR-PM pebble-bed reactor. In a single calculation spanning approximately 8 days, SAM reproduces the complete accident sequence: rapid depressurization, densityand diffusion-driven air ingress over ˜15 hours, onset of buoyancy-driven natural circulation, exothermic graphite oxidation with a peak fuel temperature at ˜62 hours, and eventual passive cooldown. These results demonstrate that SAM now provides the nuclear community with a preliminarily validated, modern systemlevel tool for HTGR air-ingress safety analysis, filling a recognized capability gap. Future extensions to broaden species tracking, improve oxidation chemistry, and refine the reactor model are discussed.

Yang, Gang↗

Investigation of the selective sites on graphitic carbons for oxidative dehydrogenation of isobutane

Reaction network analysis of the oxidative dehydrogenation (ODH) reaction of isobutane over model carbon catalysts with tailored open-edge graphitic structure and uniform oxygenated functionalities was used to identify the selective pathways for the formation of isobutene. Carbon-based materials have been widely used in catalysis, but the active sites are not well-understood due to the complexity of the carbon structure. Correct identification of these sites is essential for learning how to manipulate material structure to achieve high catalytic yields of the desired products. In this study, we created model catalysts with controllable surface concentration of oxygenated functionalities based on graphitized mesoporous carbon (GMC). The concentration of the oxygenated functional groups on the surface of the GMCs was varied in a continuous manner through a simply control of the burn-off level. Our studies reveal that the ODH reaction of isobutane on carbon catalysts is a parallel-consecutive pathway with partial oxidative dehydrogenation for the formation of isobutene and deep oxidation pathway for the direct formation of CO and CO2 from isobutane. These two pathways show different dependence on the quinone-type oxygen sites: the rate constant leading to the desired partial oxidation product does not show a strong correlation to the density of oxygen sites, whereas the rate constant leading to the unselective COx products increases continuously with the density of oxygen sites. These results may give insight on the rational design of carbon catalysts for ODH reactions with desirable properties.

2-METHYLPROPANE↗

ASME Irradiation Model

ASME Irradiation Model: How to deal with irradiation data in ASME code rules. Includes discussion on challenges to nuclear graphite, such as lack of sufficient irradiation data to qualify graphite for nuclear application for all grades and temperatures, variety of grades, and time/room in available MTRs to get all the required data. Discussion of Irradiation behavior, Leveraging data generated by GIF countries the past 20 years, Dimensional Change Theory, behavior, analysis, turnaround, and data. Future discussions include Arrhenius approach to predict turnaround behavior for the ASME MDS requirements for all nuclear graphite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Predictive Modeling of Electrodeposition in a Single Pore Flow-Through Electrode: From Electronucleation to Coating Thickness Uniformity

The emergence of advanced manufacturing methods capable of producing porous three-dimensional structures has expanded the design space for next-generation functional components. The ability to fabricate ordered 3D foams for use in electrocatalysis reactors has increased the need for controlled deposition of catalytic metals onto porous support materials, such as carbon. However, there is a lack of clear design guidelines for electrodeposition onto 3D substrates, due to the geometric complexity and multi-scale nature of the problem. Furthermore, electro-nucleation phenomena are often overlooked in macro-scale models of current distribution during deposition. Here, a graphite flow-through electrode (FTE) is used as a model system for copper deposition within a single pore. Potential distributions and electro-nucleation phenomena are coupled in a continuum level model by incorporating nucleation size and density as a function of overpotential, determined experimentally using in situ atomic force microscopy (AFM). The model predictions are validated by measuring the coating uniformity in the pore using micro-computed X-ray tomography (μCT). A scaling analysis comprising dimensionless parameters such as the Wagner number is presented. The simplified scaling relationship framework can guide the electrodeposition process and electrode design to optimize plating of porous substrates under fluid flow conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of graphite morphology on the tensile strength and thermal conductivity of cast iron

Highlights: • The graphite morphology is characterized from 3D structure using X–ray tomography. • The size, distribution, shape and interconnectivity of graphite are estimated. • The influences of graphite morphology on tensile properties and thermal conductivity are evaluated. • The mechanism of tensile strength and the model of thermal conductivity are discussed. - Abstract: Graphite morphology is a very important parameter affecting the properties of cast iron. In this study, the graphite morphology was characterized using both 3D and 2D structures. The experimental results revealed that when the graphite was less spheroidal, the graphite had greater interconnectivity in the 3D structure of the cast iron. The size, distribution, volume fraction, and shape of the graphite were estimated. Moreover, the influences of the graphite's morphology, size, and distribution on the tensile property and thermal conductivity at different temperatures were estimated. The experimental results revealed that with an increase in temperature, the thermal conductivity initially increased, and then decreased, whereas the tensile strength decreased slightly at first, and then decreased rapidly. In addition, with an increase in the percentage of compacted graphite, the tensile strength decreased and the thermal conductivity increased. The fracture surfaces of tensile specimens were also estimated. Finally, the mechanism of tensile strength and the model of thermal conductivity were investigated.

36 MATERIALS SCIENCE↗

Air Ingress Analysis: Part 1 - Theoretical Approach

Idaho National Laboratory (INL), under the auspices of the U.S. Department of Energy (DOE), is performing research and development that focuses on key phenomena important during potential scenarios that may occur in very high temperature gas-cooled reactors (VHTRs). Phenomena identification and ranking studies to date have ranked an air ingress event, following on the heels of a VHTR depressurization, as important with regard to core safety. Consequently, the development of advanced air-ingress-related models and verification and validation data are a very high priority. Following a loss of coolant and system depressurization incident, air will enter the core of the VHTR through the break, possibly causing oxidation of the graphite core and reflector graphite structure. Simple core and plant models indicate that, under certain circumstances, the oxidation may proceed at an elevated rate with additional heat generated from the oxidation reaction itself. Under postulated conditions of fluid flow and temperature, excessive degradation of lower plenum graphite caused by graphite oxidation can lead to a loss of mechanical strength. Excessive oxidation of core graphite can also lead to a release of fission products into the confinement, which could be detrimental to reactor safety. Analytical models developed in this study will improve our understanding of this phenomenon. This paper presents two sets of analytical models for the qualitative assessment of the air ingress phenomena. The results from the analytical models are compared with results of the computational fluid dynamic models (CFD) in the subsequent paper. The analytical models agree well with those CFD results.

99 GENERAL AND MISCELLANEOUS↗

Prediction and measurement of thermal transport across interfaces between isotropic solids and graphitic materials.

Due to the high intrinsic thermal conductivity of carbon allotropes, there have been many attempts to incorporate such structures into existing thermal abatement technologies. In particular, carbon nanotubes (CNTs) and graphitic materials (i.e., graphite and graphene flakes or stacks) have garnered much interest due to the combination of both their thermal and mechanical properties. However, the introduction of these carbon-based nanostructures into thermal abatement technologies greatly increases the number of interfaces per unit length within the resulting composite systems. Consequently, thermal transport in these systems is governed as much by the interfaces between the constituent materials as it is by the materials themselves. This paper reports the behavior of phononic thermal transport across interfaces between isotropic thin films and graphite substrates. Elastic and inelastic diffusive transport models are formulated to aid in the prediction of conductance at a metal-graphite interface. The temperature dependence of the thermal conductance at Au-graphite interfaces is measured via transient thermoreflectance from 78 to 400 K. It is found that different substrate surface preparations prior to thin film deposition have a significant effect on the conductance of the interface between film and substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Prediction and measurement of thermal transport across interfaces between isotropic solids and graphitic materials.

Due to the high intrinsic thermal conductivity of carbon allotropes, there have been many attempts to incorporate such structures into existing thermal abatement technologies. In particular, carbon nanotubes (CNTs) and graphitic materials (i.e., graphite and graphene flakes or stacks) have garnered much interest due to the combination of both their thermal and mechanical properties. However, the introduction of these carbon-based nanostructures into thermal abatement technologies greatly increases the number of interfaces per unit length within the resulting composite systems. Consequently, thermal transport in these systems is governed as much by the interfaces between the constituent materials as it is by the materials themselves. This paper reports the behavior of phononic thermal transport across interfaces between isotropic thin films and graphite substrates. Elastic and inelastic diffusive transport models are formulated to aid in the prediction of conductance at a metal-graphite interface. The temperature dependence of the thermal conductance at Au-graphite interfaces is measured via transient thermoreflectance from 78 to 400 K. It is found that different substrate surface preparations prior to thin film deposition have a significant effect on the conductance of the interface between film and substrate.

Norris, Pamela M.↗