Search NASA⌕ Search

SEARCH · Search NASA

Results for “HELICOPTERS - DESIGN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Minimum-complexity helicopter simulation math model

An example of a minimal complexity simulation helicopter math model is presented. Motivating factors are the computational delays, cost, and inflexibility of the very sophisticated math models now in common use. A helicopter model form is given which addresses each of these factors and provides better engineering understanding of the specific handling qualities features which are apparent to the simulator pilot. The technical approach begins with specification of features which are to be modeled, followed by a build up of individual vehicle components and definition of equations. Model matching and estimation procedures are given which enable the modeling of specific helicopters from basic data sources such as flight manuals. Checkout procedures are given which provide for total model validation. A number of possible model extensions and refinement are discussed. Math model computer programs are defined and listed.

Heffley, Robert K.↗
NASA NTRS1988

Wake model for helicopter rotors in high speed flight

Two alternative approaches are developed to calculate blade-vortex interaction airloads on helicopter rotors: second order lifting-line theory, and a lifting surface theory correction. The common approach of using a larger vortex core radius to account for lifting-surface effects is quantified. The second order lifting-line theory also improves the modeling of yawed flow and swept tips. Calculated results are compared with wind tunnel measurements of lateral flapping, and with flight test measurements of blade section lift on SA349/2 and H-34 helicopter rotors. The tip vortex core radius required for good correlation with the flight test data is about 20 percent chord, which is within the range of measured viscous core sizes for helicopter rotors.

Johnson, Wayne R.↗
NASA NTRS1989

Importance of engine as a source of helicopter external noise

A turboshaft engine's importance as a source of helicopter external noise is presently evaluated experimentally and analytically on the basis of test data from an MD500E helicopter, with and without engine muffler, during level flyovers and climbing flight. A strong engine noise component is noted for helicopter positions nearly overhead and beyond observed position, especially in the 200-1000 Hz range; its strong rearward directivity suggests the noise source to be the broadband exhaust or combustion noise radiated from the exhaust duct. The engine muffler furnished estimated perceived noise level reductions of 2-3 dB for the centerline.

Janakiram, R. D.↗
NASA NTRS1989

Calculation of blade-vortex interaction airloads on helicopter rotors

Two alternative approaches area developed to calculate blade-vortex interaction airloads on helicopter rotors, second-order lifting-line theory and a lifting-surface theory correction. The common approach of using a larger vortex core radius to account for lifting-surface effects is quantified. The second-order lifting-line theory also improves the modeling of low aspect-ratio blades yawed flow, and swept tips. Calculated results are compared with wind-tunnel measurements of lateral flapping, and with flight test measurements of blade section lift on SA349/2 and H-34 helicopter rotors. The tip vortex core radius required for good correlation with the flight test data is about a 20-percent chord, which is within the range of measured viscous core sizes for helicopter rotors.

Johnson, Wayne↗
NASA NTRS1990

Assessment of worm gearing for helicopter transmissions

A high-efficiency hydrostatic worm gear drive for helicopter transmissions is assessed. The example given is for a large cargo helicopter with three 4000-kW engines and transmission reduction ratio of 110. Also contained are: an efficiency calculation, a description of the test stand for evaluating the feasibility of worm gear hydrostatic mesh, a weight calculation, and a comparison with conventional helicopter transmissions of the same power and transmission reduction ratio.

Chaiko, Lev↗
NASA NTRS1990

Helicopter Airborne Laser Positioning System (HALPS)

The theory of operation, configuration, laboratory, and ground test results obtained with a helicopter airborne laser positioning system developed by Princeton University is presented. Unfortunately, due to time constraints, flight data could not be completed for presentation at this time. The system measures the relative position between two aircraft in three dimensions using two orthogonal fan-shaped laser beams sweeping across an array of four detectors. Specifically, the system calculates the relative range, elevation, and azimuth between an observation aircraft and a test helicopter with a high degree of accuracy. The detector array provides a wide field of view in the presence of solar interference due to compound parabolic concentrators and spectral filtering of the detector pulses. The detected pulses and their associated time delays are processed by the electronics and are sent as position errors to the helicopter pilot who repositions the aircraft as part of the closed loop system. Accuracies obtained in the laboratory at a range of 80 ft in the absence of sunlight were + or - 1 deg in elevation; +0.5 to -1.5 deg in azimuth; +0.5 to -1.0 ft in range; while elevation varied from 0 to +28 deg and the azimuth varied from 0 to + or - 45 deg. Accuracies in sunlight were approximately 40 deg (+ or - 20 deg) in direct sunlight.

Eppel, Joseph C.↗
NASA NTRS1990

Evaluation of Composite Components on the Bell 206L and Sikorsky S-76 Helicopters

Progress on two programs to evaluate structural composite parts in flight service on Bell 206L and Sikorsky S-76 commercial helicopters is described. Forty ship sets of composite parts that include the litter door, baggage door, forward fairing, and vertical fin were installed on Bell Model 206L helicopters that are operating in widely different climates. Part installation started in 1981 and selected parts are being removed and tested at prescribed intervals over a 10 yr evaluation. Four horizontal stabilizers and eleven tail rotor spars that are production parts on the S-76 helicopter are being tested after prescribed periods of service to determine the effects of the operating environment on their performance. Concurrent with the flight evaluation, materials used to fabricate the parts are being exposed in ground racks and tested at specified intervals to determine the effects of outdoor environments. Results achieved from 123,000 hrs of accumulated service on the Bell 206L parts and 53,000 hrs on the Sikorsky S-76 parts are reported. Seventy-eight Bell 206L parts were removed and tested statically. Results of 7 yrs of ground exposure of materials used to make the Bell 206L parts are presented.

Baker, Donald J.↗
NASA NTRS1989

The benefits and costs of automation in advanced helicopters - An empirical study

A helicopter simulation was conducted to examine the interaction between voice-activated controls and altitude-hold automation. A single-pilot scout/attack helicopter with conventional controls was simulated with full out-the-window computer-generated imagery. Helicopter pilots performed simulated missions which included hover, cruise and ground attack phases. For half of the flights, voice-activated controls were used instead of manual controls, for two flight tasks (weapon selection and data-burst transmission). Hover performance during data-burst hover improved when voice-activation was used. However, subjective ratings indicated higher workload levels with voice-activation. An altitude-hold automation manipulation was crossed with the voice-activation/manual manipulation. Altitude-hold automation provided two significant benefits: (1) pilots were able to hover with less lateral movement; and (2) pilots reported less workload. However, there was a performance cost associated with the automation. Pilots were significantly slower in responding to unexpected events during hover.

Bortolussi, Michael R.↗
NASA NTRS1989

Cognitive perspectives on map displays for helicopter flight

Currently accessible technologies are providing entirely new display concepts for enhancing helicopter navigation. Yet the effectiveness of such displays depends on the extent to which they are configured according to principles from research on human performance. Computer generated map displays in the present study were configured according to previous research on maps, navigational problem solving, and spatial cognition in large scale environments. Interest centered on the representation of different spatial relationships that would best support helicopter navigational problem solving. One map display emphasized the global relationships between objects in the environment. The other map showed the pilot's relationship to objects as he traveled through the environment. Twenty skilled pilots used the maps to complete several navigational tasks that occurred within a realistic simulation program tailored for helicopter navigation. Findings indicate that the type of task and mode of flight (low level or Nap of the Earth (NOE)) are important determinants of map display effectiveness.

Harwood, Kelly↗
NASA NTRS1990

Optimal autorotational descent of a helicopter with control and state inequality constraints

A point-mass model of the OH-58A helicopter has been used to ascertain the autorotation profiles which minimize helicopter impact velocity while remaining within the bounds of the main rotor's collective pitch and angular speed. The optimal control strategies are comparable to those employed by pilots in autorotational landings. It is noted that a possibility exists for the reduction of the height-sink rate restriction zone of OH-58A helicopters, using optimal energy-management techniques.

Lee, Allan Y.↗
NASA NTRS1990

A study of rotor broadband noise mechanisms and helicopter tail rotor noise

The rotor broadband noise mechanisms considered are the following: (1) lift fluctuation due to turbulence ingestion; (2) boundary layer/trailing edge interaction; (3) tip vortex formation; and (4) turbulent vortex shedding from blunt trailing edge. Predictions show good agreement with available experimental data. The study shows that inflow turbulence is the most important broadband noise source for typical helicopters' main rotors at low- and mid-frequencies. Due to the size difference, isolated helicopter tail rotor broadband noise is not important compared to the much louder main rotor broadband noise. However, the inflow turbulence noise from a tail rotor can be very significant because it is operating in a highly turbulent environment, ingesting wakes from upstream components of the helicopter. The study indicates that the main rotor turbulent wake is the most important source of tail rotor broadband noise. The harmonic noise due to ingestion of main rotor tip vortices is studied.

Chou, Shau-Tak Rudy↗
NASA NTRS1990

The identification of helicopter noise using a neural network

Experiments were carried out to demonstrate the ability of an artificial neural network (ANN) system to distinguish between the noise of two helicopters. The ANN is taught to identify helicopters by using two types of features: one that is associated with the ratio of the main-rotor to tail-rotor blade passage frequency (BPF), and the ohter that describes the distribution of peaks in the main-rotor spectrum, which is independent of the tail-rotor. It is shown that the ability of the ANN to identify helicopters is comparable to that of a conventional recognition system using the ratio of the main-rotor BPF to the tail-rotor BPF (when both the main- and the tail-rotor noise are present), but the performoance of ANN exceeds the conventional-method performance when the tail-rotor noise is absent. In addition, the results of ANN can be obtained as a function of propagation distance.

Cabell, Randolph H.↗
NASA NTRS1990

Nonlinear coupled rotor-fuselage helicopter vibration studies with higher harmonic control

This paper addresses the problem of vibration prediction and vibration reduction in helicopters by means of active control methodologies. The nonlinear equations of a coupled rotor/flexible-fuselage system have been derived using computer algebra, thus relegating this tedious task to the computer. In the solution procedure the trim state and vibratory response of the helicopter are obtained in a single pass by using a harmonic balance technique and simultaneously satisfying the trim and the vibratory response of the helicopter in all the rotor and fuselage degrees of freedom. Using this solution procedure, the influence of the fuselage flexibility on the vibratory response is studied. In addition, it is shown that the conventional single frequency HHC is capable of reducing either the hub loads or only the fuselage vibrations but not both simultaneously. A new scheme called MHHC, having multiple higher harmonic pitch inputs, was used to accomplish this task of simultaneously reducing both the vibratory hub loads and fuselage vibratory response. In addition, the uniqueness of this MHHC scheme is explained in detail.

Friedmann, P. P.↗
NASA NTRS1992

Vision-based range estimation using helicopter flight data

Pilot aiding during low-altitude flight depends on the ability to detect and locate obstacles near the helicopter's intended flightpath. Computer-vision-based methods provide one general approach for obstacle detection and range estimation. Several algorithms have been developed for this purpose, but have not been tested with actual flight data. This paper presents results obtained using helicopter flight data with a feature-based range estimation algorithm. A method for recursively estimating range using a Kalman filter with a monocular sequence of images and knowledge of the camera's motion is described. The helicopter flight experiment and four resulting datasets are discussed. Finally the performance of the range estimation algorithm is explored in detail based on comparison of the range estimates with true range measurements collected during the flight experiment.

Smith, Philip N.↗
NASA NTRS1990

Evaluation of composite components on the Bell 206L and Sikorsky S-76 helicopters

Progress on two programs to evaluate structural composite components in flight service on Bell 206L and Sikorsky S-76 commercial helicopters is described. Forty ship sets of composite components that include the litter door, baggage door, forward fairing, and vertical fin have been installed on Bell Model 206L helicopters that are operating in widely different climates. Component installation started in 1981 and selected components were removed and tested at prescribed intervals over a ten year evaluation. Four horizontal stabilizers and eleven tail rotor spars that are production components on the S-76 helicopter were tested after prescribed periods of service to determine the effects of the operating environment on their performance. Concurrent with the flight evaluation, materials used to fabricate the components were exposed in ground racks and tested at specified intervals to determine the effects of outdoor environments. Results achieved from 123,000 hours of accumulated service on the Bell 206L components and 53,000 hours on the Sikorsky S-76 components are reported. Seventy-eight Bell 206L components were removed and tested statically. Results of seven years of ground exposure of materials used to fabricate the Bell 206L components are presented. Results of tests on four Sikorsky S-76 horizontal stabilizers and eleven tail rotor spars are also presented. Panels of material used to fabricate the Sikorsky S-76 components that were exposed for six years were tested and results are presented.

Baker, Donald J.↗
NASA NTRS1992

On the calculation of the response of helicopters to control inputs

In the past few years, a number of studies have provided accurate flight test data for the control response of single rotor helicopters over a wide frequency range. These measured responses have been compared to theory in a number of studies. Various differences between theory and experiment appear in all of these studies. Some of these differences are examined. A quantitative explanation of one prominent difference associated with the contribution of the lag degree of freedom is provided. Areas for further investigation are suggested. The discussion is directed towards articulated rotor helicopters. Flight test data from the UH-60, CH-53, and AH-64 helicopters, much of it taken for the express purpose of evaluating the control response, correlation with theory, and the use of parameter identification methods, is considered. Results for flight conditions near hover are emphasized.

Curtiss, H. C., Jr.↗
NASA NTRS1992

Finite difference time domain grid generation from AMC helicopter models

A simple technique is presented which forms a cubic grid model of a helicopter from an Aircraft Modeling Code (AMC) input file. The AMC input file defines the helicopter fuselage as a series of polygonal cross sections. The cubic grid model is used as an input to a Finite Difference Time Domain (FDTD) code to obtain predictions of antenna performance on a generic helicopter model. The predictions compare reasonably well with measured data.

Cravey, Robin L.↗
NASA NTRS1993

Optical Shaft-Angle Encoder For Helicopter Rotor

Angular position of helicopter rotor blade determined precisely. Accomplished by use of optical shaft-angle encoder called "256 Ring" on rotor swashplate. Each 360 degree rotation of helicopter main rotor broken down into 256 reflective segments. As rotor rotates, beam of light reflected in turn from each segment into optoelectronic system. One of 256 segments reflects larger pulse than others do. Position of rotor determined by counting number of pulses after this reference pulse. While swashplate mounting requirements unique to each type of helicopter, concept applicable to all types of rotorcraft.

Golub, Robert A.↗