Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A Structural Design Approach Tailored for the Rapid Preliminary Design of Microreactor Components

High-temperature microreactors can play a role in developing reliable, portable energy sources for off-grid remote locations, microgrid concepts, and industrial process heat. Portability and passive safety criteria tend to skew microreactor structural component designs toward complex geometries, high thermal stresses, and design bases with large numbers of startup/shutdown cycles. Current design rules, as typified by Section III of the American Society of Mechanical Engineers (ASME) Boiler & Pressure Vessel Code, are less than optimal for these conditions, particularly for preliminary component designs where developers need to rapidly consider a large number of potential component configurations. This paper presents a design method targeted toward rapid, efficient evaluation of preliminary component designs using modern finite element analysis. The new method retains key connections with the ASME Code rules and design data while streamlining the design approach. This paper presents the design method, several verification examples illustrating the similarities and differences between the new method and the current ASME rules, and the application of the new approach to the evaluation of a test article mimicking key features of a heat pipe–cooled microreactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Southwestern U.S. Biomass Burning Smoke Hygroscopicity: The Role of Plant Phenology, Chemical Composition, and Combustion Properties

Biomass burning emissions have substantially increased with continued warming and drying in the southwestern U.S., impacting air quality and atmospheric processes. To better quantify impacts of biomass burning aerosols, an extensive laboratory study of fresh smoke emissions was conducted at Los Alamos National Laboratory. Laboratory burn experiments with selected native and invasive southwestern U.S. fuels were used to elucidate the role of fuel type, chemical composition, and ignition method on the hygroscopicity of smoke. Here we focus on a custom controlled relative humidity (RH) nephelometry system using the direct measurement of aerosol light scattering with two nephelometers—one at dry conditions and one at a controlled high RH (RH ~ 85%). Aerosol hygroscopicity was highly variable with the enhancement in light scattering coefficient in the range of 1.02 < f (RH = 85%) < 2.1 and corresponding to the kappa parameter (κ neph ) ranging from ~0 to 0.18. Hygroscopicity is determined primarily by the fuel's inorganic ion content. For example, invasive halophytes with high inorganic salt content exhibit much greater water uptake than native coniferous species with low inorganic content. Combustion temperature and phase, flaming or smoldering, play a secondary role in the water uptake of smoke. High–temperature ignition methods create flaming conditions that enhance hygroscopicity while lower–temperature smoldering conditions diminish hygroscopicity. Our results construct an empirical relation between κ neph and the inorganic content of the fuel and smoke to predict water uptake.

54 ENVIRONMENTAL SCIENCES↗

Overstepping Löwenstein’s Rule—A Route to Unique Aluminophosphate Frameworks with Three-Dimensional Salt-Inclusion and Ion-Exchange Properties

The synthesis of four non-Löwenstein uranyl aluminophosphates, [Cs13Cl5][(UO2)3Al2O(PO4)6], Rb7[Al2O(PO4)3][(UO2)6O4(PO4)2], Cs3[Al2O(PO4)3][(UO2)3O2], and Rb3[Al2O(PO4)3][(UO2)3O2], the first uranyl phosphate salt-inclusion material [Cs4Cs4Cl][(UO2)4(PO4)5], and a related structure Cs4[UO2Al2(PO4)4], all prepared by molten flux methods, is reported. All compounds are discussed from the point of view of their structural features favoring, in some cases, ion-exchange properties. Löwenstein’s rule, well known in the realm of zeolites, aluminosilicate, and aluminophosphate minerals, describes the tendency of tetrahedra (Al, P, Si, and Ge) linked by an oxygen bridge to be of two different elements resulting in the avoidance of Al–O–Al bonds. Zeolites and related aluminosilicate/aluminophosphate minerals are traditionally formed under relatively mild temperatures, where zeolites are synthesized using the hydrothermal synthetic technique. Few exceptions to Löwenstein’s rule are known among aluminophosphates, and four of the five exceptions are synthesized under either high temperature or high pressure methods. For that reason, the high-temperature flux synthesis of four new non-Löwenstein uranyl aluminophosphates realizes a unique synthetic approach to forming the new pyroaluminate-based building block, [Al2O(PO4)6]14–, that can be easily obtained and employed for the construction of new porous structures.

nuclear, materials and chemistry by design, synthe↗

Structural characterization of the FeTiO{sub 3}-MnTiO{sub 3} solid solution

We have synthesized the (Mn{sub 1-x}Fe{sub x})TiO{sub 3} (0.0{<=}x{<=}1.0) solid solution compounds by high-temperature sintered methods, and characterized their crystal structures by combining X-ray diffraction, Moessbauer spectroscopy and Raman spectroscopy. Lattice constants and volumes show a linear decrease with increase in FeTiO{sub 3} content. All experimental results illustrate a decreasing distortion of TiO{sub 6} (or FeO{sub 6}/MnO{sub 6}) octahedra with increase in FeTiO{sub 3} content. The vibrational frequency of O---Ti---O bending motions presents a direct dependence on the corresponding bond angle (the <O---Ti---O). - Graphical abstract: Raman spectra of the (Mn{sub 1-x}Fe{sub x})TiO{sub 3} (0.0{<=}x{<=}1.0) system. Inset: the enlarged view from 310 to 390 cm{sup -1}. E{sub g(3)} shifts to high frequency and the remaining shifts to low frequency as xFeTiO{sub 3} content increases

36 MATERIALS SCIENCE↗

Real-space density kernel method for Kohn–Sham density functional theory calculations at high temperature

Kohn–Sham density functional theory calculations using conventional diagonalization based methods become increasingly expensive as temperature increases due to the need to compute increasing numbers of partially occupied states. In this work, we present a density matrix based method for Kohn–Sham calculations at high temperatures that eliminates the need for diagonalization entirely, thus reducing the cost of such calculations significantly. Specifically, we develop real-space expressions for the electron density, electronic free energy, Hellmann–Feynman forces, and Hellmann–Feynman stress tensor in terms of an orthonormal auxiliary orbital basis and its density kernel transform, the density kernel being the matrix representation of the density operator in the auxiliary basis. Using Chebyshev filtering to generate the auxiliary basis, we next develop an approach akin to Clenshaw–Curtis spectral quadrature to calculate the individual columns of the density kernel based on the Fermi operator expansion in Chebyshev polynomials and employ a similar approach to evaluate band structure and entropic energy components. We implement the proposed formulation in the SPARC electronic structure code, using which we show systematic convergence of the aforementioned quantities to exact diagonalization results, and obtain significant speedups relative to conventional diagonalization based methods. Finally, we employ the new method to compute the self-diffusion coefficient and viscosity of aluminum at 116 045 K from Kohn–Sham quantum molecular dynamics, where we find agreement with previous more approximate orbital-free density functional methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extraction of Terpenoids from Pine Needle Biomass Using Dimethyl Ether

Pine needles are an industrial feedstock for extracts used in a variety of applications, but conventional extraction methods often result in a degradation of the terpenoid compounds that naturally occur in loblolly pine ( Pinus taeda ). Separation of these compounds from pine biomass is an energy-intensive operation, typically requiring a significant input of thermal energy. An alternative separation approach with potential energy savings is extraction with a condensable gas, namely, dimethyl ether. Biomass materials are exposed to liquid dimethyl ether under pressure, which mobilizes the organics. The extract is then separated from the insoluble pine matter, and dimethyl ether is volatilized away from the separated organic species. A variety of terpene derivatives were extracted from pine needle biomass using this approach, including monoterpenes, sesquiterpenes, and related oxygenates, which were identified using two-dimensional gas chromatography/mass spectrometry. Additionally, the dimethyl ether-treated needles resemble needles subjected to low-temperature drying, whereas needles treated with a high-temperature drying method appear to have shrunken structures. The results suggest that dimethyl ether extraction has significant potential for separating valuable organics from complex matrices without the application of thermal energy during treatment.

dimethyl ether (DME) extraction↗

Nuclear Structural Component Relevant Properties of Nickel-Based Alloys Produced via Additive Manufacturing

Idaho National Laboratory initiated examination of nickel-based alloys manufactured via three different additive manufacturing methods for potential applications in nuclear, high temperature structural components. The three methods analyzed included laser powder bed fusion, blown powder laser directed energy deposition, and wire-fed gas metal arc directed energy deposition. With the rapid push towards additive manufacturing, codes do not exist that definitively define what is or is not tolerable for each process and application, such as with conventional, wrought products. This report contains the initial work to understand possible manufacturing methods for high temperature alloys, and specifically, void formation, microstructure evolution, corrosion, and mechanical properties. To generate mechanical test data, specimens were tested irrespective of voids and microstructures were analyzed to better understand how to negate/improve these issues. The preliminary results showed major decreases in mechanical performance for material tested. Test specimens will continue to be produced to further improve each additive manufacturing processes, quantify void acceptance, and better understand the most suitable high temperature alloys receptive to additive manufacturing and high temperature nuclear applications.

36 MATERIALS SCIENCE↗

Photoconductivity in reactively evaporated copper indium selenide thin films

Copper indium selenide thin films of composition CuInSe{sub 2} with thickness of the order of 130 nm are deposited on glass substrate at a temperature of 423 ±5 K and pressure of 10{sup −5} mbar using reactive evaporation, a variant of Gunther's three temperature method with high purity Copper (99.999%), Indium (99.999%) and Selenium (99.99%) as the elemental starting materials. X-ray diffraction (XRD) studies shows that the films are polycrystalline in nature having preferred orientation of grains along the (112) plane. The structural type of the film is found to be tetragonal with particle size of the order of 32 nm. The structural parameters such as lattice constant, particle size, dislocation density, number of crystallites per unit area and strain in the film are also evaluated. The surface morphology of CuInSe{sub 2} films are studied using 2D and 3D atomic force microscopy to estimate the grain size and surface roughness respectively. Analysis of the absorption spectrum of the film recorded using UV-Vis-NIR Spectrophotometer in the wavelength range from 2500 nm to cutoff revealed that the film possess a direct allowed transition with a band gap of 1.05 eV and a high value of absorption coefficient (α) of 10{sup 6} cm{sup −1} at 570 nm. Photoconductivity at room temperature is measured after illuminating the film with an FSH lamp (82 V, 300 W). Optical absorption studies in conjunction with the good photoconductivity of the prepared p-type CuInSe{sub 2} thin films indicate its suitability in photovoltaic applications.

36 MATERIALS SCIENCE↗

HTGR Simulation Methods & International Collaborations

ART-GCR “Methods” activity is split between Experimental Validation data from the ANL NSTF and OSU HTTF (next three presentations). HTGR core simulation (this presentation). International collaboration within OECD Generation-IV (Gen-IV) and USA/Japan bi-lateral agreements (this presentation) HTGR Simulation Methods No new NE-52 funding for HTGR Methods support in FY20; ~$200K FY19 carry-over funds only. Consists of international code-to-code benchmarks (IAEA CRP on HTGR UAM and OECD/NEA MHTGR-350) and refinement of a few-group Pebble Bed Reactor (PBR) cross section (XS) generation methodology. Funding will be requested in FY21 to produce the final reports for the two benchmarks and continue the development of the PBR XS generation methodology. Additional (non-ART) HTGR-related support work at INL NEAMS: HTR-Application work package at INL Create a benchmark for the pebble shuffling and depletion algorithms being developed for NEAMS Griffin code. iFOA award with X-Energy: Develop independent Monte Carlo model of Xe-100 design. Independent design confirmatory analysis of Xe-100 design using NEAMS tools Griffin and Pronghorn. Support X-Energy design team to use their own legacy design tools (VSOP99 and MGT). Support NEAMS Griffin and Pronghorn development team for the iFOA needs (received $50K additional funding for required development).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plasma etching of cavities into diamond anvils for experiments at high pressures and high temperatures

We describe a method for precisely etching small cavities into the culets of diamond anvils for the purpose of providing thermal insulation for samples in experiments at high pressures and high temperatures. The cavities were fabricated using highly directional oxygen plasma to reactively etch into the diamond surface. The lateral extent of the etch was precisely controlled to micron accuracy by etching the diamond through a lithographically fabricated tungsten mask. The performance of the etched cavities in high-temperature experiments in which the samples were either laser heated or electrically heated is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Underpotential Deposition of 3D Transition Metals: Versatile Electrosynthesis of Single-Atom Catalysts on Oxidized Carbon Supports

Use of single-atom catalysts (SACs) has become a popular strategy for tuning activity and selectivity toward specific pathways. However, conventional SAC synthesis methods require high temperatures and pressures, complicated procedures, and expensive equipment. Recently, underpotential deposition (UPD) has been investigated as a promising alternative, yielding high-loading SAC electrodes under ambient conditions and within minutes. Yet only few studies have employed UPD to synthesize SACs, and all have been limited to UPD of Cu. In this work, a flexible UPD approach for synthesis of mono- and bi-metallic Cu, Fe, Co, and Ni SACs directly on oxidized, commercially available carbon electrodes is reported. The UPD mechanism is investigated using in situ X-ray absorption spectroscopy and, finally, the catalytic performance of a UPD-synthesized Co SAC is assessed for electrochemical nitrate reduction to ammonia. In conclusion, the findings expand upon the usefulness and versatility of UPD for SAC synthesis, with hopes of enabling future research toward realization of fast, reliable, and fully electrified SAC synthesis processes.

36 MATERIALS SCIENCE↗

Preparation and photoluminescence properties of Mn{sup 2+}-activated M{sub 2}Si{sub 5}N{sub 8} (M=Ca, Sr, Ba) phosphors

Mn{sup 2+}-doped M{sub 2}Si{sub 5}N{sub 8} (M=Ca, Sr, Ba) phosphors have been prepared by a solid-state reaction method at high temperature and their photoluminescence properties were investigated. The Mn{sup 2+}-activated M{sub 2}Si{sub 5}N{sub 8} phosphors exhibit narrow emission bands in the wavelength range of 500-700 nm with peak center at about 599, 606 and 567 nm for M=Ca, Sr, Ba, respectively, due to the {sup 4}T{sub 1}({sup 4}G){yields}{sup 6}A{sub 1}({sup 6}S) transition of Mn{sup 2+}. The long-wavelength emission of Mn{sup 2+} ion in the host of M{sub 2}Si{sub 5}N{sub 8} is attributed to the effect of a strong crystal-field of Mn{sup 2+} in the nitrogen coordination environment. Also it is observed that there exists energy transfer between M{sub 2}Si{sub 5}N{sub 8} host lattice and activator (Mn{sup 2+}). The potential applications of these phosphors have been pointed out. - Graphical abstract: The luminescence properties of Mn{sup 2+} in M{sub 2}Si{sub 5}N{sub 8} (M=Ca, Sr, Ba) have been investigated. All M{sub 2}Si{sub 5}N{sub 8}:Mn{sup 2+} phosphors show narrow symmetric bands in the wavelength range of 500-700 nm with peak center at about 599, 606 and 567 nm for M=Ca, Sr, Ba, respectively. The observed band emission is ascribed to the {sup 4}T{sub 1}({sup 4}G){yields}{sup 6}A{sub 1}({sup 6}S) transition of Mn{sup 2+} in M{sub 2}Si{sub 5}N{sub 8} host lattice.

36 MATERIALS SCIENCE↗

Crystal structure and chemical bonding of novel Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16}

A novel Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16} has been synthesized using the high-temperature reaction method and characterized by both powder and single-crystal X-ray diffractions. The title compound crystallized in the orthorhombic crystal system (space group Immm, Z=2, Pearson symbol oI78) with fifteen crystallographically unique atomic positions in the asymmetric unit, and the lattice parameters are refined as a=4.5244(4) A, b=6.9932(6) A, and c=53.043(5) A. The complex crystal structure of the title compound can be described as a 2:1 intergrowth of two closely related compounds: La{sub 2}Li{sub 2}Ge{sub 3} (Ce{sub 2}Li{sub 2}Ge{sub 3}-type) and La{sub 3}Li{sub 4}Ge{sub 4} (Zr{sub 3}Cu{sub 4}Si{sub 4}-type) acting like 'building-blocks' along the c-axis. Six La sites are categorized into three distinct types based on the local coordination environment showing the coordination numbers of 12-14. Three unique Li sites are placed in the centers of local tetrahedra formed by four Ge atoms which eventually construct Ge{sub 2} dimers or 1-dimensional cis-/trans-Ge chains. Theoretical investigations using the tight-binding linear muffin-tin orbital (LMTO) method provide rationales for an improved structural stability and for unique local coordination geometries established by anionic elements including [LiGe{sub 4}] tetrahedra, cis-/trans-Ge chain and Ge{sub 2} dimers. - Graphical abstract: Reported is a novel ternary Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16}. The complex crystal structure can be viewed as a simple combination of two closely related known compounds acting as 'building-blocks', La{sub 2}Li{sub 2}G{sub 3} and La{sub 3}Li{sub 4}Ge{sub 4}, in a 2:1 stoichiometric ratio. Highlights: Black-Right-Pointing-Pointer A novel Li-containing polar intermetallic compound La{sub 11}Li{sub 12}Ge{sub 16} was synthesized. Black-Right-Pointing-Pointer The complex crystal structure was easily explained as a combination of two known compounds. Black-Right-Pointing-Pointer Theoretical calculations indicated that the Fermi level was located near the pseudogap.

36 MATERIALS SCIENCE↗

Combined effect of chemical pressure and valence electron concentration through the electron-deficient Li substitution on the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system

Four members of the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system have been prepared by high-temperature reaction method and characterized by X-ray diffractions. All compounds crystallize in the orthorhombic Gd{sub 5}Si{sub 4}-type structure (space group Pnma, Pearson code oP16) with bonding interactions for interslab Ge{sub 2} dimers. The Li substitution for rare-earth elements in the RE{sub 4}LiGe{sub 4} system leads to a combined effect of the increased chemical pressure and the decreased valance electron concentration (VEC), which eventually results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type with all broken interslab Ge–Ge bond for the parental RE{sub 5}Ge{sub 4} to the Gd{sub 5}Si{sub 4}-type structure for the ternary RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. Site-preference between rare-earth metals and Li is proven to generate energetically the most favorable atomic arrangements according to coloring-problem, and the rationale is provided using both the size-factor and the electronic-factor related, respectively, to site-volume and electronegativity as well as QVAL values. Tight-binding, linear-muffin-tin-orbital (TB-LMTO) calculations are performed to investigate electronic densities of states (DOS) and crystal orbital Hamilton population (COHP) curves. The influence of reduced VEC for chemical bonding including the formation of interslab Ge{sub 2} dimers is also discussed. The magnetic property measurements prove that the non-magnetic Li substitution leads to the ferromagnetic (FM)-like ground state for Ce{sub 4}LiGe{sub 4} and the co-existence of antiferromagntic (AFM) and FM ground states for Sm{sub 4}LiGe{sub 4}. - Graphical abstract: Reported is a combined effect of the chemical pressure and the reduced VEC caused by the smaller monovalent non-magnetic Li substitution for the larger trivalent magnetic rare-earth metals in the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. This results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type to the Gd{sub 5}Si{sub 4}-type structure and the changes in magnetic properties. Display Omitted - Highlights: • Four Li-containing intermetallic compounds RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr and Sm) were synthesized. • The combined effect of the chemical pressure and the reduced VEC caused by Li substitution for a rare-earth metal results in the structure transformation. • Electronic structures and magnetic properties of title compounds were thoroughly investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure synthesis and thermoelectric properties of micro/nano structures CoSb{sub 3}

Nano-particle and defect have been proved to be effective in depressing the lattice thermal conductivity and improving the performance of thermoelectric materials. In this work, In{sub 0.5}Sn{sub x}Co{sub 4}Sb{sub 12} were prepared using a high pressure and high temperature (HPHT) method, In and Sn was assumed that In plays the role of a filler and occupies the Sb-icosahedron voids. Doping of In and Sn results in the defects, nanostructuring, and mesoscale structuring were all combined into a single skutterudite matrix. The thermoelectric properties were measured in the temperature range of 321–710 K. As expected, with the synthetic pressures increased,the thermal conductivity of samples improved significantly. The minimum value of In{sub 0.5}Sn{sub 0.4}Co{sub 4}Sb{sub 12} synthesized at 3.8 GPa is 1.79 Wm{sup −1} K{sup −1} and the highest Seebeck coefficient of sample In{sub 0.5}Sn{sub 0.2}Co{sub 4}Sb{sub 12} synthesized at 2.8 GPa reached 222 μV K{sup −1} finally. - Graphical abstract: Micro/nano structures CoSb{sub 3} could be quickly prepared by HPHT method, the defects, nanostructuring and mesoscale structuring are uniformly distributed in the whole sample. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and characterization of powder metallurgy tantalum components prepared by high compaction pressure technique

The present study has investigated the consolidation behaviors of tantalum powders during compaction and sintering, and the characteristics of sintered components. For die compaction, the densification behaviors of the powders are simulated by finite element analyses based on the yield function proposed by Shima and Oyane. Accordingly, the green density distribution for coarser particles is predicted to be more uniform because they exhibits higher initial relative tap density owing to lower interparticle friction. It is also found that cold isostatic pressing is capable of producing higher dense compacts compared to the die pressing. However, unlike the compaction behavior, the sintered density of smaller particles is found to be higher than those of coarser ones owing to their higher specific surface area. The maximum sintered density was found to be 0.96 of theoretical density where smaller particles were pressed isostatically at 400 MPa followed by sintering at 2000 °C. Moreover, the effects of processing conditions on grain size and texture were also investigated. The average grain size of the sintered specimen is 30.29 μm and its texture is less than 2 times random intensity. Consequently, it is concluded that the higher pressure compaction technique is beneficial to produce high dense and texture-free tantalum components compared to hot pressing and spark plasma sintering. - Highlights: • Higher Ta density is obtained from higher pressure and sintering temperature. • High compaction method enables P/M Ta to achieve the density of 16.00 g·cm{sup −3}. • A P/M Ta component with fine microstructure and random orientation is developed.

36 MATERIALS SCIENCE↗

Thermal etching of silver: Influence of rolling defects

Silver is well known to be thermally etched in an oxygen-rich atmosphere and has been extensively studied in the laboratory to understand thermal etching and to limit its effect when this material is used as a catalyst. Yet, in many industrial applications the surface of rolled silver sheets is used without particular surface preparation. Here, it is shown by combining FIB-tomography, FIB-SIMS and analytical SEM that the kinetics of thermal etch pitting are significantly faster on rolled Ag surfaces than on polished surfaces. This occurs due to range of interacting phenomena including (i) the reaction of subsurface carbon-contamination with dissolved oxygen to form pores that grow to intersect the surface, (ii) surface reconstruction around corrosion pits and surface scratches, and (iii) sublimation at low pressure and high temperature. A method to identify subsurface pores is developed to show that the pores have (111) and (100) internal facets and may be filled with a gas coming from the chemical reaction of oxygen and carbon contamination. - Highlights: Thermal etching of industrial silver sheets vs. polished silver sheets Effect of annealing atmosphere on the thermal etching of silver: surface and subsurface characterization Link between etch pitting and defects induced by rolling. FIB-tomography coupled with EBSD for determining crystal planes of the facets of subsurface pores. FIB-SIMS characterization to probe the gas confined inside subsurface pores.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and properties of a new lead fluoride borate, Pb{sub 3}OBO{sub 3}F

Graphical abstract: The structure of Pb{sub 3}OBO{sub 3}F consists of two distortional Pb-centered tetrahedra and BO{sub 3} triangles which are all symmetrical with each other respectively in the gestalt structure to the extent that the Pb{sub 3}OBO{sub 3}F compound crystallizes in the symmetrical space group. Highlights: Black-Right-Pointing-Pointer Pb{sub 3}OBO{sub 3}F has been grown from PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. Black-Right-Pointing-Pointer It crystallizes in the orthorhombic system, space group Pbcm. Black-Right-Pointing-Pointer Pb{sub 3}OBO{sub 3}F consists of Pb(1)O{sub 3}F tetrahedra, Pb(2)O{sub 4} tetrahedra and BO{sub 3} triangles. -- Abstract: A new compound, Pb{sub 3}OBO{sub 3}F, has been grown by the high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system. It crystallizes in the orthorhombic system, space group Pbcm with unit-cell parameters a = 7.6313(14) Angstrom-Sign , b = 6.5229(12) Angstrom-Sign , c = 11.906(2) Angstrom-Sign , Z = 4, volume = 592.66(19) Angstrom-Sign {sup 3}. The structure of the compound is solved by the direct methods and refined to R{sub 1} = 0.0528 and wR{sub 2} = 0.1400. Pb{sub 3}OBO{sub 3}F consists of Pb(1)O{sub 3}F tetrahedra, Pb(2)O{sub 4} tetrahedra and BO{sub 3} triangles which build up the symmetrical chains extended along the c-axis. The powder X-ray diffraction pattern of the Pb{sub 3}OBO{sub 3}F has been measured. Functional groups presented in the sample were identified by Fourier transform infrared spectrum.

36 MATERIALS SCIENCE↗