SEARCH · Search NASA

Results for “Higher-Order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Unsteady Euler solution of transonic helicopter rotor flow

A new time-accurate Euler method is presented for calculating the transonic flow over a lifting or nonlifting rotor blade in both hover and forward flight. The approach is to solve the conservative Euler equations in a rotor-fixed frame of reference using a finite-volume method. The discretized equations are solved by using a Runge-Kutta multistage scheme with a new higher-order implicit residual smoothing procedure. Preliminary results were compared with wind-tunnel data. In all the cases considered, good agreement was found with experimental data.

Chang, I-Chung↗

NASA NTRS1987

Advances in computational structural and solid mechanics; Proceedings of the First World Congress on Computational Mechanics, University of Texas, Austin, Sept. 22-26, 1986

Papers are presented on the nonlinear dynamic analysis of quasi-symmetric anisotropic structures, the analysis of large deformations of membrane shells by the generalized finite difference method, the vibration of shear-deformable laminated plate structures by the finite strip method, and Coon's surface method for the formulation of finite elements for plates and shells. Other topics include an evaluation of higher-order modal methods for calculating the transient structural response, a nonlinear dynamic analysis of frame structures, and a nonlinear analysis of a truss by energy minimization. Also considered are an incremental Galerkin method for plates and stiffened plates, a comparison of the postbuckling behavior of plates and shells, and a general solution of bending in a cylindrical shell.

Noor, Ahmed K.↗

NASA NTRS1986

A fractal model for crustal deformation

It is hypothesized that crustal deformation occurs on a scale-invariant matrix of faults. For simplicity, a two-dimensional pattern of hexagons on which strike-slip faulting occurs is considered. The behavior of the system is controlled by a single parameter, the fractal dimension. Deformation occurs on all scales of faults. The fractal dimension determines the fraction of the total displacement that occurs on the first-order or primary faults. The value of the fractal dimension can be obtained from the frequency-magnitude relation for earthquakes. The results are applied to the San Andreas fault system in central California. Earthquake studies give D = 1.90. The main strand of the San Andreas fault is associated with the primary faults of the fractal system. It is predicted that the relative velocity across the main strand is 2.93 cm/yr. The remainder of the relative velocity of 5.5 cm/yr between the Pacific and North American plates occurs on higher-order faults. The predicted value is in reasonably good agreement with the value 3.39 + or - 0.29 cm/yr obtained from geological studies.

Turcotte, D. L.↗

NASA NTRS1987

Variability of ethane on Jupiter

Varying stratospheric temperature profiles and C2H6 altitude distributions furnish contexts for the evaluation of ethane abundances and distributions in the Jupiter stratosphere. Substantial ethane line emission and retrieved mole fraction variability is noted near the footprint of Io's flux tube, as well as within the auroral regions. It is suggested that this and other observed phenomena are due to the modification of local stratospheric chemistry by higher-order effects, which are in turn speculated to be due to the precipitation of charged particles along magnetic field lines.

Kostiuk, Theodor↗

NASA NTRS1987

Covariance and the hierarchy of frame bundles

This is an essay on the general concept of covariance, and its connection with the structure of the nested set of higher frame bundles over a differentiable manifold. Examples of covariant geometric objects include not only linear tensor fields, densities and forms, but affinity fields, sectors and sector forms, higher order frame fields, etc., often having nonlinear transformation rules and Lie derivatives. The intrinsic, or invariant, sets of forms that arise on frame bundles satisfy the graded Cartan-Maurer structure equations of an infinite Lie algebra. Reduction of these gives invariant structure equations for Lie pseudogroups, and for G-structures of various orders. Some new results are introduced for prolongation of structure equations, and for treatment of Riemannian geometry with higher-order moving frames. The use of invariant form equations for nonlinear field physics is implicitly advocated.

Estabrook, Frank B.↗

NASA NTRS1988

Turbulence modeling based on direct simulation of the Navier-Stokes equations

The underlying physics of the transport equation for turbulence dissipation is analyzed. The study is developed based on the dimensional analysis of turbulence scales, higher-order rapid distortion assumptions, and direct numerical simulations. A preliminary turbulence model for the dissipation rate of turbulent kinetic energy is proposed; allowance is made for the effects of mean rotation rates on the production and removal of dissipation rate. It is shown that the production of dissipation due to mean-velocity gradients is proportional to the production of turbulent kinetic energy.

Bardina, Jorge↗

NASA NTRS1988

Configuration trade and code validation study on a conical hypersonic vehicle

A study has been conducted on a generic wing-cone transatmospheric vehicle at Mach numbers form 2.5 to 4.5. The objectives of the study were to experimentally define the aerodynamic characteristics of the vehicle and evaluate several computational aerodynamic prediction methods through comparison with the experimental results. The baseline wing-cone configuration fuselage consisted of a 5 deg half-angle cone forebody, cylindrical midbody, and 9 deg truncated cone afterbody. The 4-percent-thick diamond airfoil wing had an aspect ratio of 1. Several configuration variables were investigated to provide trade information on canard, wing-position and incidence, vertical tail, and nose bluntness effects. Results of the study show that wing-position and wing-incidence effects on the longitudinal aerodynamic characteristics can be significantly influenced by wing-body interference. The use of positive wing incidence to provide favorable forebody orientation for possible inlet performance improvement is accompanied by trim drag and lift-drag ratio penalties. The lateral-directional stability characteristics were strongly influenced by the location of the vertical tails. The higher-order full-potential method provided better estimates of the aerodynamic characteristics than either the linearized supersonic potential method or the tangent-cone/tangent-wedge/shock-expansion on method.

Covell, Peter F.↗

NASA NTRS1988

Karhunen-Loeve expansion of Burgers' model of turbulence

The properties of the Karhunen-Loeve expansion of a strongly inhomogeneous random process are examined with emphasis on applications to turbulent flow fields. The ability of the KL expansion to represent functions that have both slow and rapid variations in a relatively small number of expansion terms is tested on a one-dimensional model based on the forced Burgers' equation. The rate of the convergence of the expansion is evaluated, and its dependence on the Reynolds number is determined. It is shown that the KL eigenfunctions possess wall boundary layers attached to outer structures that are independent of the Reynolds number (at high Reynolds numbers). It is also shown that the spectrum of eigenvalues is broad at large Reynolds numbers, requiring many terms to represent higher-order derivatives of the function.

Chambers, D. H.↗

NASA NTRS1989

A Hierarchy of Transport Approximations for High Energy Heavy (HZE) Ions

The transport of high energy heavy (HZE) ions through bulk materials is studied neglecting energy dependence of the nuclear cross sections. A three term perturbation expansion appears to be adequate for most practical applications for which penetration depths are less than 30 g per sq cm of material. The differential energy flux is found for monoenergetic beams and for realistic ion beam spectral distributions. An approximate formalism is given to estimate higher-order terms.

Wilson, John W.↗

NASA NTRS1988

Turbulence characteristics inside a turbulent spot in plane Poiseuille flow

In wall-bounded shear flows the transition to turbulence through localized disturbances goes through a pattern starting with a development of shear layers. The localized normal velocity fluctuations induce normal vorticity through the lift-up effect. These shear layers become unstable to secondary disturbances, and if the amplitudes of the disturbances are large enough, a turbulent spot develops. Investigations of the spot in boundary layers has shown that the turbulent part of the spot is very similar to a fully developed boundary layer. Wygnanski et al. (1976) showed that the mean profile at the center-symmetry plane has a logarithmic region and Johansson et al. (1987) showed that both the higher-order statistics and flow structures in the spot were the same as in the corresponding fully developed flow. In what respects the turbulence inside the Poiseuille spot is similar to fully developed turbulent channel flow is studied. The numerically simulated spot is used, where the characteristics inside the spot are compared to those of the wave packet in the wingtip area. A recent experimental investigation of the velocity field associated with the Poiseuille spot by Klingmann et al. is used for comparison.

Henningson, D. S.↗

NASA NTRS1989

Chemical etching and organometallic chemical vapor deposition on varied geometries of GaAs

Results of micron-spaced geometries produced by wet chemical etching and subsequent OMCVD growth on various GaAs surfaces are presented. The polar lattice increases the complexity of the process. The slow-etch planes defined by anisotropic etching are not always the same as the growth facets produced during MOCVD deposition, especially for deposition on higher-order planes produced by the hex groove etching.

Bailey, Sheila G.↗

NASA NTRS1988

Dynamics of the Uranian and Saturnian satellite systems - A chaotic route to melting Miranda?

Miranda's anomalously large inclination, in conjunction with the postaccretional resurfacing of both Miranda and Ariel and anomalously large eccentricities characterizing the inner Uranian satellites, are presently held to suggest the disruption of resonant configurations that once existed in this satellite system. Classical analytical methods for the dynamics of resonance are here used to demonstrate how temporary capture into a second- or higher-order resonance can generate large increases in eccentricity and inclination on comparatively short time-scales. Such capture into resonance may result in chaotic motion.

Dermott, Stanley F.↗

NASA NTRS1988

Theory and application of radiation boundary operators

A succinct unified review is provided of the theory of radiation boundary operators. With the recent introduction of the on-surface radiation condition (OSRC) method and the continued growth of finite-difference and finite-element techniques for modeling electromagnetic wave scattering problems, the understanding and use of radiation boundary operators has become increasingly important. Results are presented to illustrate the application of radiation boundary operators in both these areas. Recent OSRC results include analysis of the scattering behavior of both electrically small and large cylinders, a reactively loaded acoustic sphere, and a simple reentrant duct. Radiation boundary operator results include the demonstration of the effectiveness of higher-order operators in truncating finite-difference time-domain grids.

Moore, Thomas G.↗

NASA NTRS1989

Anisotropy of the diffuse background at millimeter wavelengths

The anisotropy of the diffuse background radiation has been measured with a 10-deg FWHM beam in a broad spectral band from 0.6 to 4.0 mm. A dipole anisotropy is detected with magnitude consistent with previous measurements; the present data may, however, be contaminated by atmospheric emission. Upper limits are set to fluctuations at higher-order multipoles. The most stringent limit is at l = 4, where a 95-percent confidence-level limit of less than 0.00025 is set. The observed level of isotropy sharply constrains the possibility of local astronomical origin for the submillimeter excess.

Bernstein, G. M.↗

NASA NTRS1989

Scaling laws for homogeneous turbulent shear flows in a rotating frame

The scaling properties of plane homogeneous turbulent shear flows in a rotating frame are examined mathematically by a direct analysis of the Navier-Stokes equations. It is proved that two such shear flows are dynamically similar if and only if their initial dimensionless energy spectrum E star (k star, 0), initial dimensionless shear rate SK sub 0/epsilon sub 0, initial Reynolds number K squared sub 0/nu epsilon sub 0, and the ration of the rotation rate to the shear rate omega/S are identical. Consequently, if universal equilibrium states exist, at high Reynolds numbers, they will only depend on the single parameter omega/S. The commonly assumed dependence of such equilibrium states on omega/S through the Richardson number Ri = -2(omega/S)(1-2 omega/S) is proven to be inconsistent with the full Navier-Stokes equations and to constitute no more than a weak approximation. To be more specific, Richardson number similarity is shown to only rigorously apply to certain low-order truncations of the Navier-Stokes equations (i.e., to certain second-order closure models) wherein closure is achieved at the second-moment level by assuming that the higher-order moments are a small perturbation of their isotropic states. The physical dependence of rotating turbulent shear flows on omega/S is discussed in detail along with the implications for turbulence modeling.

Speziale, Charles G.↗

NASA NTRS1989

Improved calculation of total cross section for pair production by relativistic heavy ions

A calculation of the total cross section for direct electron-positron pair production by heavy ions is described. It combines the use of the Weizsaecker-Williams method for low-energy transfers and existing calculations for high-energy transfers. Higher-order corrections to the total cross section are calculated based on the Weizsaecher-Williams method and existing results for pair production by photons.

Eby, P. B.↗

NASA NTRS1989

Advanced development of the boundary element method for steady-state heat conduction

Considerable progress has been made in recent years toward advancing the state-of-the-art in solid mechanics boundary element technology. In the present work, much of this new technology is applied in the development of a general-purpose boundary element method (BEM) for steady-state heat conduction. In particular, the BEM implementation involves the use of higher-order conforming elements, self-adaptive integration and multi-region capability. Two- and three-dimensional, as well as axisymmetric analysis, are incorporated within a unified framework. In addition, techniques are introduced for the calculation of boundary flux, and for the inclusion of thermal resistance across interfaces. As a final extension, an efficient formulation is developed for the analysis of solid three-dimensional bodies with embedded holes. For this last class of problems, the new BEM formulation is particularly attractive, since use of the alternatives (i.e. finite element or finite difference methods) is not practical. A number of detailed examples illustrate the suitability and robustness of the present approach for steady-state heat conduction.

Dargush, G. F.↗

NASA NTRS1989

On the black hole lens and its foci

Methods developed for radio occultation studies of planetary atmospheres are used to predict the electromagnetic focusing properties of a refracting lens representation of a Schwarzschild black hole. The infinity of foci are of three distinct types: a principal forward axial focus which is by far the strongest; higher-order forward axial foci; and backward conical foci with axial nulls.

Eshleman, Von R.↗