Search NASA⌕ Search

SEARCH · Search NASA

Results for “Human Lunar Exploration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Common Power and Energy Storage Solutions to Support Lunar and Mars Surface Exploration Missions

Future human exploration missions on the moon and Mars will require a new generation of power sources to sustain crew members and leverage in-situ resources. Long-duration human missions to the lunar and Martian surface will likely include large-scale landers, crew habitats, pressurized rovers, and in-situ propellant production plants. The power demands for these surface elements, whether on the moon or Mars, will be similar starting with robotic precursor missions in the multi-kilowatt range scaling to 10s of kilowatts as the crew presence expands and local propellant production is established. While the power requirements may be similar, the vastly different environments on the two surfaces present unique challenges for power generation and storage systems. Candidate technologies to satisfy the surface power needs include deployable solar arrays, regenerative fuel cells, and small fission reactors. This paper presents strategies for power system architectures with elements that can be used on the moon and are extensible to Mars with features that make them resilient to either environment.

Mason, Lee↗

Understanding the Lunar System Architecture Design Space

Based on the flexible path strategy and the desire of the international community, the lunar surface remains a destination for future human exploration. This paper explores options within the lunar system architecture design space, identifying performance requirements placed on the propulsive system that performs Earth departure within that architecture based on existing and/or near-term capabilities. The lander crew module and ascent stage propellant mass fraction are primary drivers for feasibility in multiple lander configurations. As the aggregation location moves further out of the lunar gravity well, the lunar lander is required to perform larger burns, increasing the sensitivity to these two factors. Adding an orbit transfer stage to a two-stage lunar lander and using a large storable stage for braking with a one-stage lunar lander enable higher aggregation locations than Low Lunar Orbit. Finally, while using larger vehicles enables a larger feasible design space, there are still feasible scenarios that use three launches of smaller vehicles.

Arney, Dale C.↗

Distributed Lunar Data Platform with Advanced Machine Learning Capabilities in Support of Lunar Science and Exploration

The United States 2020 Space Policy directive declares that NASA, in cooperation with private industry, will “extend human economic activity into deep space by establishing a permanent human presence on the Moon”. This goal will require advanced data management, as well as analysis, modeling and representation of lunar information in order to prepare for Artemis human missions, lunar science investigations and exploration. To meet this requirement, we conceptualize and present an implementation strategy for a distributed platform for lunar data retrieval, inferencing and analysis, which will be based on federated learning and the NASA Celestial Mapping System (CMS). In addition to demonstrating the imperative of enabling lunar-borne data to remain in-situ but still accessible, this presentation will also include examples of how third parties could contribute both datasets and new functionality into this platform using an AI-based data import pipeline and a plug-in architecture respectively.

Artificial Intelligence↗

Development of the Resource Prospector Planetary Rover

The Resource Prospector (RP) is an In-­‐Situ Resource Utilization (ISRU) lunar rover mission under study by NASA. RP is planned to launch in 2020 to prospect for subsurface volatiles and to extract oxygen from lunar regolith. The mission will address several of NASA's "Strategic Knowledge Gaps" for lunar exploration. The mission will also address the Global Exploration Roadmap's strategic goal of using local resources for human exploration. The distribution of lunar subsurface volatiles drives the mission requirement for mobility. The spatial distribution is hypothesized to be governed by impact cratering with the top 0.5 m being patchy at scales of 100 m. The mixing time scale increases with depth (less frequent larger impacts). Consequently, increased mobility reduces the depth requirement for sampling. The target RP traverse will extend 1 km radially from the landing site to sample craters of varying sizes. Sampling craters with different ages will reveal possible volatile emplacement history. In 1 Ga, approximately 60-­70 craters of 10 m diameter form per km2. Thus, the rover will need to sample at least ten of these craters, which may require a total traverse path length of 2-­‐3 km. During 2014-­2015, we developed an initial prototype rover for RP. The current design is a solar powered, four-­wheeled vehicle, with hub motor drive, offset four wheel steering, and active suspension. Active suspension provides capabilities including changing vehicle ride height, traversing comparatively large obstacles, and controlling load on the wheels. All-­wheel steering enables the vehicle to point arbitrarily while roving, e.g., to keep the solar array pointed at the sun while in motion. The offset steering combined with active suspension improves driving in soft soil. The rover's on-­board software utilizes NASA's Core Flight Software, which is a reusable flight software environment. During 2015, we completed the initial rover software build, which provides low-­level hardware interfaces, basic mobility control, waypoint driving, odometry, basic error checking, and camera services. Development of the prototype rover has enabled maturation of many of the subsystems to TRL 5. During the next year, we will conduct integrated testing of concepts of operation, navigation, and remote driving tools. In addition, we will perform environmental tests including radiation (avionics), thermal and thermal/vacuum (mechanisms), and gravity offload (mobility).

robotics↗

Radiation Shielding of Lunar Regolith/Polyethylene Composites and Lunar Regolith/Water Mixtures

Space radiation is a complex mixed field of ionizing radiation that can pose hazardous risks to sophisticated electronics and humans. Mission planning for lunar exploration and long duration habitat construction will face tremendous challenges of shielding against various types of space radiation in an attempt to minimize the detrimental effects it may have on materials, electronics, and humans. In late 2009, the Lunar Crater Observation and Sensing Satellite (LCROSS) discovered that water content in lunar regolith found in certain areas on the moon can be up to 5.6 +/-2.8 weight percent (wt%) [A. Colaprete, et. al., Science, Vol. 330, 463 (2010). ]. In this work, shielding studies were performed utilizing ultra high molecular weight polyethylene (UHMWPE) and aluminum, both being standard space shielding materials, simulated lunar regolith/ polyethylene composites, and simulated lunar regolith mixed with UHMWPE particles and water. Based on the LCROSS findings, radiation shielding experiments were conducted to test for shielding efficiency of regolith/UHMWPE/water mixtures with various percentages of water to compare relative shielding characteristics of these materials. One set of radiation studies were performed using the proton synchrotron at the Loma Linda Medical University where high energy protons similar to those found on the surface of the moon can be generated. A similar experimental protocol was also used at a high energy spalation neutron source at Los Alamos Neutron Science Center (LANSCE). These experiments studied the shielding efficiency against secondary neutrons, another major component of space radiation field. In both the proton and neutron studies, shielding efficiency was determined by utilizing a tissue equivalent proportional counter (TEPC) behind various thicknesses of shielding composite panels or mixture materials. Preliminary results from these studies indicated that adding 2 wt% water to regolith particles could increase shielding of the regolith materials by about 6%. The findings may be utilized to extend the possibilities of potential candidate materials for lunar habitat structures, will potentially impact the design criteria of future human bases on the moon, and provide some guidelines for future space mission planning with respect to radiation exposure and risks posed on astronauts.

Johnson, Quincy F.↗

NASA lunar surface habitat and remote exploration demonstration project

The Human Exploration Demonstration Project (HEDP) conducted by the NASA Ames Research Center to develop technological integration and demonstration capabilities for lunar and Mars space missions is described. The development of safe, effective, and reliable systems requires that independently engineered subsystems be fully integrated and tested under realistic conditions. The primary objective of the HEDP is demonstration of various aspects of human exploration and habitation on extraterrestrial surfaces. Some of the technologies to be demonstrated are also applicable to unmanned precursor mission functions. It is concluded that the HEDP will provide a unique opportunity to address a broad spectrum of advanced mission operations by bridging between the early requirements for robotic systems with control at earth-based workstations.

Clearwater, Yvonne A.↗

Apollo to Artemis: Mining 50-Year Old Records to Inform Future Human Lunar Landing Systems

Under the Artemis lunar exploration program, NASA is committed to landing American astronauts on the moon by 2024. While NASA’s new Space Launch System rocket and Orion capsule will carry astronauts from Earth to the Gateway, the human lunar landing system has not yet been fully defined. As in the Apollo program, there are concerns for vehicle weight and internal volume such that seats may not be desirable, and standing during lunar descent and ascent may be a preferred engineering solution. With such a design, astronauts will experience +GZ (head-to-foot) accelerations during capsule accelerations, and it is unclear whether spaceflight deconditioned astronauts can tolerate these. Apollo astronauts stood during lunar descent and ascent, and the data contained in the early program records for those missions represent a unique resource that may provide insights to the cardiovascular stress associated with this human landing system design.

Petersen, D.↗

Asteroid Redirect Mission Proximity Operations for Reference Target Asteroid 2008 EV5

NASA's Asteroid Redirect Mission (ARM) is composed of two segments, the Asteroid Redirect Robotic Mission (ARRM), and the Asteroid Redirect Crewed Mission (ARCM). In March of 2015, NASA selected the Robotic Boulder Capture Option1 as the baseline for the ARRM. This option will capture a multi-ton boulder, (typically 2-4 meters in size) from the surface of a large (greater than approx.100 m diameter) Near-Earth Asteroid (NEA) and return it to cis-lunar space for subsequent human exploration during the ARCM. Further human and robotic missions to the asteroidal material would also be facilitated by its return to cis-lunar space. In addition, prior to departing the asteroid, the Asteroid Redirect Vehicle (ARV) will perform a demonstration of the Enhanced Gravity Tractor (EGT) planetary defense technique2. This paper will discuss the proximity operations which have been broken into three phases: Approach and Characterization, Boulder Capture, and Planetary Defense Demonstration. Each of these phases has been analyzed for the ARRM reference target, 2008 EV5, and a detailed baseline operations concept has been developed.

Reeves, David M.↗

NASA's Solar System Exploration Research Virtual Institute: Science and Technology for Lunar Exploration

The NASA Solar System Exploration Research Virtual Institute (SSERVI) is a virtual institute focused on research at the intersection of science and exploration, training the next generation of lunar scientists, and development and support of the international community. As part of its mission, SSERVI acts as a hub for opportunities that engage the larger scientific and exploration communities in order to form new interdisciplinary, research-focused collaborations. The nine domestic SSERVI teams that comprise the U.S. complement of the Institute engage with the international science and exploration communities through workshops, conferences, online seminars and classes, student exchange programs and internships. SSERVI represents a close collaboration between science, technology and exploration enabling a deeper, integrated understanding of the Moon and other airless bodies as human exploration moves beyond low Earth orbit. SSERVI centers on the scientific aspects of exploration as they pertain to the Moon, Near Earth Asteroids (NEAs) and the moons of Mars, with additional aspects of related technology development, including a major focus on human exploration-enabling efforts such as resolving Strategic Knowledge Gaps (SKGs). The Institute focuses on interdisciplinary, exploration-related science focused on airless bodies targeted as potential human destinations. Areas of study represent the broad spectrum of lunar, NEA, and Martian moon sciences encompassing investigations of the surface, interior, exosphere, and near-space environments as well as science uniquely enabled from these bodies. This research profile integrates investigations of plasma physics, geology/geochemistry, technology integration, solar system origins/evolution, regolith geotechnical properties, analogues, volatiles, ISRU and exploration potential of the target bodies. New opportunities for both domestic and international partnerships are continually generated through these research and community development efforts, and SSERVI can further serve as a model for joint international scientific efforts through its creation of bridges across disciplines and between countries. Since the inception of the NASA Lunar Science Institute (SSERVIs predecessor), it has and will continue to contribute in many ways toward the advancement of lunar science and the eventual human exploration of the Moon.

virtual↗

Evaluation of Long-Term Storage Stability and Operational Efficiency of Rapid Cycle Amine Adsorbents

With the recent incorporation of Mars Extravehicular Activity (EVA) into the 2025 NASA roadmap, Rapid Cycle Amine (RCA) technology advancement within the Exploration Extravehicular Mobility Unit (xEMU) applies to both the upcoming Lunar Artemis missions and future human exploration of Mars. The incorporation of commercial spacesuit vendors to service NASA’s crewed-space programs since 2021 has increased the demand for regenerable, RCA-based carbon dioxide (CO2) and humidity control adsorbents. The regenerable RCA subunit is the most advanced, long-term solution for CO2 removal and humidity control, enabling both lunar and Martian EVAs. The adsorbent selected for use within the RCA unit must exhibit sufficient storage stability and operational efficiency for prolonged missions. As XploSafe worked to simultaneously develop both a recirculating sub-atmospheric test rig and adsorbents for the RCA system within the xEMU, several novel adsorbents were evaluated for long-term storage stability in support of future extended-duration missions. The chosen materials were periodically evaluated by nuclear magnetic resonance (NMR) spectroscopy, thermal desorption-coupled with gas chromatography/mass spectrometry (TD-GC/MS), and CO2 adsorption to assess long-term storage efficacy across various environmental storage conditions. NMR spectroscopy was utilized by extracting the active CO2 adsorbing chemical from the solid support with deuterated solvent and comparing the spectra over time for degradation and change. The solid adsorbents were also analyzed via TD-GC/MS to reveal any potential off-gassing chemicals over time. Additionally, XploSafe’s breakthrough test rig was utilized to dose the solid adsorbents with a 585 BTU/h metabolic rate flow-equivalent CO2 stream and monitored for 0–99% CO2 breakthrough. The performance metrics from the breakthrough analysis were compared over the storage study duration for CO2 removal and humidity control. Xplo-SA9T was evaluated for 24 months, whereas two additional adsorbent variants, MMPA-Sorbent and LPEI-Sorbent, were each evaluated for 12 months.

John R Tidwell↗

CRICKET: Cryogenic Reservoir Inventory by Cost-Effective Kinetically Enhanced Technology

NASA PROGRAMMATIC CHALLENGE: Locate hidden water ice in the darkest, coldest places on the moon using dozens of simple, autonomous robots. CONCEPTUAL SOLUTION: Use multiple small, autonomous bots to search for hidden water ice in permanently shadowed regions of the surface of the moon. Bots will locate and tag hidden water ice for follow up missions.Technical Basis for proposed solution: use of emerging and maturing technologies - MEMS, Cubesats, Sensor nets, integrated devices – will minimize cost risk and maximize return. Benefits: Cricket will enable human exploration through in-situ resource utilization: Cricket will demonstrate a distributed constellation to achieve a key NASA goal of novel uses of commercially available technologies. Cricket will reignite public interest in lunar exploration through a sustained human, and robotic, presence on the moon. Technical Approach: The cricket constellation has three members: the "queen"; the "hive" and the "cricket" foragers. The queen transports the hive an its crickets to the moon. The hive lands on the surface and disperses the crickets (there may be more than one species of cricket). The crickets then use the hive as a communications and recharging hub. Each cricket hosts algorithms that allow it to explore its surroundings and monitor its power state - something like a lunar Roomba - and return for recharging. If they are lost due to power or surface condition problems, replacements can carry out the hive tasks. The two most successful types of bio-inspired algorithms (BIAs) are evolutionary algorithms and swarm-based algorithms which are inspired by the natural evolution and collective behavior in animals.The evolution of the idea is summarized in Table 1 and Figure 1. NIAC context: This system integrates key elements from other NIAC efforts; it uses them and extends them into a meaningful whole

Cryogenics↗

A Mission Concept Based on the ISECG Human Lunar Surface Architecture

The National Aeronautics and Space Administration (NASA) is participating in the International Space Exploration Coordination Group (ISECG), working together with 13 other space agencies to advance a long-range human space exploration strategy. The ISECG has developed a Global Exploration Roadmap (GER) that reflects the coordinated international dialog and continued preparation for exploration beyond low-Earth orbit - beginning with the International Space Station (ISS) and continuing to the Moon, near-Earth asteroids, and Mars [1]. The roadmap demonstrates how initial capabilities can enable a variety of missions in the lunar vicinity, responding to individual and common goals and objectives, while contributing to building partnerships required for sustainable human space exploration that delivers value to the public. The current GER includes three different near-term themes: exploration of a near-Earth asteroid, extended duration crew missions in cis-lunar space, and humans to the lunar surface.

Gruener, J. E.↗

ATHLETE: Lunar Cargo Handling for International Lunar Exploration

As part of the Human-Robot Systems Project within the NASA Exploration Technology Development Program, the Jet Propulsion Laboratory is developing a vehicle called ATHLETE: the All-Terrain Hex-Limbed Extra-Terrestrial Explorer. The basic idea of ATHLETE is to have six relatively small wheels on the ends of legs. The small wheels and associated drive actuators are much less massive than the larger wheels and gears needed for an "all terrain" vehicle that cannot "walk" out of extreme terrain. The mass savings for the wheels and wheel actuators is greater than the mass penalty of the legs, for a net mass savings. Starting in 2009, NASA became engaged in detailed architectural studies for international discussions with the European Space Agency (ESA), the Japanese Space Agency (JAXA), and the Canadian Space Agency (CSA) under the auspices of the International Architecture Working Group (IAWG). ATHLETE is considered in most of the campaign options considered, providing a way to offload cargo from large Altair-class landers (having a cargo deck 6+ meters above the surface) as well as offloading international landers launched on Ariane-5 or H-2 launch vehicles. These international landers would carry provisions as well as scientific instruments and/or small rovers that would be used by international astronauts as part of an international effort to explore the moon.Work described in this paper includes architectural studies in support of the international missions as well as field testing of a half-scale ATHLETE prototype performing cargo offloading from a lander mockup, along with multi-kilometer traverse, climbing over greater than 1 m rocks, tool use, etc.

International Collaboration in Space↗

High Leverage Space Transportation System Technologies for Human Exploration Missions to the Moon and Beyond

The feasibility of returning humans to the Moon by 2004, the 35th anniversary of the Apollo 11 landing, is examined assuming the use of existing launch vehicles (the Space Shuttle and Titan 4B), a near term, advanced technology space transportation system, and extraterrestrial propellant--specifically 'lunar-derived' liquid oxygen or LUNOX. The lunar transportation system (LTS) elements consist of an expendable, nuclear thermal rocket (NTR)-powered translunar injection (TLI) stage and a combination lunar lander/Earth return vehicle (LERV) using cryogenic liquid oxygen and hydrogen (LOX/LH2) chemical propulsion. The 'wet' LERV, carrying a crew of 2, is configured to fit within the Shuttle orbiter cargo bay and requires only modest assembly in low Earth orbit. After Earth orbit rendezvous and docking of the LERV with the Titan 4B-launched NTR TLI stage, the initial mass in low Earth orbit (IMLEO) is approx. 40 t. To maximize mission performance at minimum mass, the LERV carries no return LOX but uses approx. 7 t of LUNOX to 'reoxidize' itself for a 'direct return' flight to Earth followed by an 'Apollo-style' capsule recovery. Without LUNOX, mission capability is constrained and the total LTS mass approaches the combined Shuttle-Titan 4B IMLEO limit of approx. 45 t even with enhanced NTR and chemical engine performance. Key technologies are discussed, lunar mission scenarios described, and LTS vehicle designs and characteristics are presented. Mission versatility provided by using a small 'all LH2' NTR engine or a 'LOX-augmented' derivative, either individually or in clusters, for outer planet robotic orbiter, small Mars cargo, lunar 'commuter', and human Mars exploration class missions is also briefly discussed.

Borowski, Stanley K.↗

Transfer Vehicle Accommodations at Transportation Node

There are three primary objectives of this study. The first is to identify time-phased accommodation capabilities necessary to support the civil space exploration initiatives. These initiatives include the Lunar and Mars missions in the Human Exploration Initiative (HEI). Primary accommodation requirements include integration and assembly of vehicle components and systems on-orbit, and protection of these vehicles from the space environment, particularly debris. Secondly, this study will develop accommodation concepts, define impacts (hooks and scars) to Space Station Freedom (SSF), identify staging/servicing requirements, and identify required technology advances. Finally, the majority of the study effort has been devoted to conducting a trade study to evaluate alternative transfer vehicle accommodation concepts. These concepts have ranged from basing all transfer vehicle accommodations for both Lunar and Mars transfer vehicles at SSF, to basing all accommodation capabilities off SSF. Two steps are shown in the NASA reference SSF evolution process. The first configuration is to provide lunar transfer vehicle accommodation support, and the second is to provide accommodation support for the Mars transfer vehicle. (MTV)

Hueter, Uwe↗

What the Heck is Going On at NASA?

On February 1, 2010, the federal budget for Fiscal Year 2011 was released. NASA received an increase, unlike almost any other federal agency. At the same time, the budget revealed that the Constellation Program would be cancelled and that NASA would look to private sector providers for transportation of cargo, and eventually crew members, to the International Space Station. The Constellation Program had included a human return to the Moon by the year 2020, and the program plans called for a permanent surface facility capable of supporting human explorers. In the FY2011 announcement, the prescription of a lunar objective was replaced by a concept called flexible path that was advertised to open possibilities of other types of human missions beyond low Earth orbit. The policy direction has polarized the U.S. space community, where the reactions have been swift and polemical. The new policy has been described both as the death knell of human space exploration and as the only hope to save human space exploration. Some members of Congress have threatened legal action based on the current law regarding appropriation of funds to NASA, which states that Constellation cannot be cancelled without prior consultation with Congress. As might be expected, some of the reaction is directly related to losses or gains of jobs in districts associated with NASA facilities. However, various statements show high emotional content, suggesting that personal belief systems have been challenged. Meanwhile, many details of the new policy are not yet clear; and some aspects seem to be shifting in response to political reaction. The final direction for NASA will not be known until the FY2011 budget has been passed by Congress and signed by the President. I will draw upon my 28 years of studying, writing, and speaking on the topic of future human exploration beyond low Earth orbit to discuss the various issues at stake and the historical context for the debate. My own work has had a central theme of lunar exploration and development, but I have also come to believe that human exploration will never be more than a political sideshow until a significant economic sector can be created in space off of the Earth. Disclaimer: The views presented will be my own and in no way reflect official policies of the NASA.

Mendell, Wendell↗

Recommended Crew Systems Capabilities for a 30 to 90 Day Four-Crew Lunar Surface Mission

For any given surface mission duration, there exists a set of surface capabilities necessary to sustain a four-person crew for the length of time the crew is on the surface. Identifying these capabilities is important to mission planners and spacecraft design engineers responsible for lunar surface habitation elements, who need to know which systems and capabilities must be prioritized for the vehicles they are designing. However, simply identifying the surface capabilities does not necessarily equal a viable surface configuration. These capabilities may or may not satisfy stakeholder expectations or even permit completion of mission objectives. Lunar lander cargo mass constraints are a powerful forcing function that requires significant efforts to reduce the mass of all surface elements, including those supporting crew habitation. The required capabilities do increase as a function of mission duration, but it is a nonlinear growth. There are key points in mission duration, beyond which certain additional capabilities are needed. This forms bands of capability between each point. Within a given band, the same functional capabilities are needed, and the only scaling is that associated with daily consumables. The next higher band requires additional capabilities. This paper will focus on those capabilities needed for missions of 30-90 days. It should be noted that there are some uncertainties interpreting NASA requirements that require capabilities after a certain number of days, as typically this refers to number of days in space, not number of days on the lunar surface. Depending on transportation architecture, the number of days between Earth launch and lunar surface landing may vary, therefore impacting when certain required capabilities are implemented. However, activities to prepare humans for missions to Mars and commercial interest in lunar development may drive progressive increases in surface duration. Missions up to 30 days are expected to follow the initial 6.5-day surface missions and there may be commercial interest in extending to even greater durations. This paper will examine the potential case of a 30-90-day surface mission duration with respect to the systems necessary to support crew living and working on the lunar surface.

Habitat↗

The Robotic Lunar Exploration Program (RLEP): An Introduction to the Goals, Approach, and Architecture

The Vision for Space Exploration calls for undertaking lunar exploration activities to enable sustained human and robotic exploration of Mars and beyond, including more distant destinations in the solar system. In support of this vision, the Robotic Lunar Exploration Program (RLEP) is expected to execute a series of robotic missions to the Moon, starting in 2008, in order to pave the way for further human space exploration. This paper will give an introduction to the RLEP program office, its role and its goals, and the approach it is taking to executing the charter of the program. The paper will also discuss candidate architectures that are being studied as a framework for defining the RLEP missions and the context in which they will evolve.

Watzin, James G.↗