Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERLOCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Small‐Molecule Mixed Ionic‐Electronic Conductors for Efficient N‐Type Electrochemical Transistors: Structure‐Function Correlations

Abstract The fundamental challenge in electron‐transporting organic mixed ionic‐electronic conductors (OMIECs) is simultaneous optimization of electron and ion transport. Beginning from Y6‐type/U‐shaped non‐fullerene solar cell acceptors, we systematically synthesize and characterize molecular structures that address the aforementioned challenge, progressively introducing increasing numbers of oligoethyleneglycol (OEG; g) sidechains from 1 g to 3 g, affording OMIECs 1gY, 2gY, and 3gY, respectively. The crystal structure of 1gY preserves key structural features of the Y n series: a U‐shaped/planar core, close π–π molecular stacking, and interlocked acceptor groups. Versus inactive Y6 and Y11, all of the new glycolated compounds exhibit mixed ion‐electron transport in both conventional organic electrochemical transistor (cOECT) and vertical OECT (vOECT) architectures. Notably, 3gY with the highest OEG density achieves a high transconductance of 16.5 mS, an on/off current ratio of ~10 6 , and a turn‐on/off response time of 94.7/5.7 ms in vOECTs. Systematic optoelectronic, electrochemical, architectural, and crystallographic analysis explains the superior 3gY‐based OECT performance in terms of denser n gY OEG content, increased crystallite dimensions with decreased long‐range crystalline order, and enhanced film hydrophilicity which facilitates ion transport and efficient redox processes. Finally, we demonstrate an efficient small‐molecule‐based complementary inverter using 3gY vOECTs, showcasing the bioelectronic applicability of these new small‐molecule OMIECs.

Cho, Yongjoon↗

Briquetting characteristics of woody and herbaceous biomass blends: Impact on physical properties, chemical composition, and calorific value

Abstract Intercropping (or polyculture) is gaining a lot of interest as it increases yields, allows better utilization of resources (water and nutrients), and provides better land management. The objective of this study is to understand the briquetting characteristics of woody and herbaceous biomass blends, which might result from intercropping. Tests were conducted on blends of lodgepole pine, switchgrass, and corn stover biomass using three hammer mill screen sizes (i.e., 4.8, 12.7, and 19.05 mm), three blend moistures (12%, 15%, and 18%, w.b.), and two‐ and three‐blend ratios (i.e., 1:1 and 1:1:1) using a pilot‐scale hydraulic briquette press. The briquette properties, such as unit and bulk density, durability rating after 5 days of storage (as they tend to attain stable density), and the energy consumption of the process were measured. The results indicate that moisture content of 12% and 15% (w.b.) and smaller hammer mill screen size of 4.8 mm increased the unit and bulk densities to >750 and >430 kg/m 3 and moisture content (15% and 18% (w.b.)) and hammer mill screen size of 12.7 and 19.05 mm produced briquettes with durability rating values of >95%. The higher moisture content of 18% (w.b.) and the hammer mill screen size of 12.7 and 19.05 mm had the highest energy consumption. The proximate and ultimate analysis showed that energy content improved by blending lodgepole pine with both corn stover and switchgrass and also showed increased calorific value and reduced ash content. Scanning electron microscopy micrographs showed interlocking of particles and cracks in the briquettes. © 2020 Society of Chemical Industry and John Wiley & Sons, Ltd

Tumuluru, Jaya Shankar↗

A long‐lived Aβ oligomer resistant to fibrillization

Abstract The hydrophobic Aβ peptide is highly aggregation prone; it first forms soluble oligomers, which then convert into the amyloid fibrils found in the cerebral plaques of Alzheimer's disease. It is generally understood that as the peptide concentration of Aβ increases, the fibrillization process is accelerated, but we examine the limits on this phenomenon. We found that once a threshold concentration of Aβ is exceeded, a stable oligomer is formed at the expense of fibril formation. The suppression of fibril formation was observed by amyloid‐binding dye Thioflavin T and solution nuclear magnetic resonance (NMR). Small‐angle X‐ray scattering, size exclusion chromatography, and analytical ultracentrifugation demonstrated that Aβ peptides form a range of compact species, with a dimer being an early highly populated oligomer. Solution NMR allowed us to define the secondary structure of this Aβ dimer, which shows interlocking contacts between C‐terminal peptide strands. Thus, we present a novel Aβ oligomer that resists conversion to fibrils and remains stable for more than one year.

Nick, Mimi↗

Simple and Efficient Synthesis of Explosive Cocrystals containing 3,5-Dimethylpyrazol-1-yl-substituted-1,2,4,5-tetrazines

The reaction of 3,4–dinitropyrazole, 5–nitrotetrazole, or 4–nitro–1,2,3–triazole with 1,2,4,5–tetrazines substituted with 3,5–dimethylpyrazolyl (dmp) groups results in energetic cocrystals after 1 minute of reflux and cooling to room temperature in yields of 89–92 %. Hydrogen–bonding between the dmp group to the N–H of the energetic heterocycles are the predominant interaction that stabilizes the new cocrystals. Each cocrystal packs in a different lattice structure and the cocrystals with sheet–like and herring–bone crystal packing orientations are less sensitive than the cocrystal with the interlocked structure. Electrostatic potential mapping helps rationalize why dmp–substituted tetrazines readily form cocrystals, whereas more electron–deficient pyrazolyl tetrazines do not. Furthermore, the calculated energetic performance of the new cocrystals approaches that of 2,4,6–trinitrotoluene (TNT) and importantly, these materials will aid in the rational design of new cocrystalline energetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triptycene-Based Molecular Rods for Langmuir-Blodgett Monolayers

In this report we introduce fully modular synthesis leading to three representative examples of rigid molecular rods that are intended to form sturdy monolayers on various surfaces. These molecules contain two triptycene units that are designed to interlock into a compact "double-decker" structure. Two of the three final products provided suitable crystals for X-ray diffraction (analyzed on synchrotron), allowing deeper insight into packing in the 3-D crystal lattice. The acidity of all three compounds were determined by capillary electrophoresis, and the pK a values ranged between 2.06-2.53. All three rigid rods easily formed Langmuir-Blodgett monolayers (LBMs) on the water-air interfaces, with the area per molecule equal to 55-59 Å 2 /molecule, suggesting tight intermolecular packing. The thickness of all three films reached ~19 Å after transfer to a gold (111) surface, meaning that individual molecules are tilted maximally 38° from the axis perpendicular to the surface. The structure of one of these films on a gold (111) surface was visualized by AFM. These geometrically unique molecules represent promising platforms with a wide scope of applicability in the supramolecular architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oblique Packing and Tunable Excitonic Coupling in DNA‐Templated Squaraine Rotaxane Dimer Aggregates

Abstract When molecules are aggregated such that their excited states form delocalized excitons, their spatial arrangement, or packing, can be coarsely controlled by templating and finely controlled by chemical substitution; however, challenges remain in controlling their packing on intermediate length scales. Here, we use an approach based on mechanically interlocked molecules to promote an elusive oblique packing arrangement in a series of three squaraine rotaxane dimers. We template the squaraine rotaxane dimers using DNA and observe two excitonically split bands of near‐equal intensity in their absorption spectra – a distinct signature of oblique packing, validated by theoretical modeling of the experimental results. Additional fine control of packing is demonstrated by fluorinating the macrocycle of the rotaxane, which promotes denser packing and stronger excitonic interactions.

36 MATERIALS SCIENCE↗

Robust Immobilized Amine CO 2 Sorbent Pellets Utilizing a Poly(Chloroprene) Polymer Binder and Fly Ash Additive

Pelletization of ca. 50 wt % amine/silica carbon dioxide sorbents was achieved with the novel combination of fly ash (FA) as a strength additive and hydrophobic poly(chloroprene) (PC) as a binder. The PC content and overall synthesis procedure of these materials were optimized to produce pellets, labeled as FA/E100-S_(20/80)_12.2, with the highest ball-mill attrition resistance (<0.5 wt % by fines, 24 h) and maximum CO 2 capture capacity of 1.78 mmol CO 2 g -1 . The strength of the pellets was attributed to hydrogen-bonding of the relatively homogeneous PC network with the interlocked FA and BIAS particles (DRIFTS, SEM-EDS). The low degradation of 3–4 % in the pellet's CO 2 capture capacity under both dry TGA (7.5 h) and practical fixed-bed (6.5 h dry; 4.5 h humid,≈5 vol % H 2 O) CO 2 adsorption–desorption conditions highlights the pellet's excellent cyclic stability. These robust pellet characteristics make PC/FA/sorbent materials promising for commercial scale, point-source CO 2 capture.

01 COAL, LIGNITE, AND PEAT↗

Synthesis and acoustic properties study of castor‐oil‐based polyurethane foams with the addition of graphene‐oxide‐modified straw fibers

Abstract Polyurethane foam (PUF) can absorb sound by air friction and structural vibrations of cell walls. It is widely used as acoustic material in the automotive industry. According to existing studies, graphene oxide (GO) can improve the acoustic properties of PUF. However, GO tends to coalesce inside PUF. In this paper, straw fibers were modified with different concentrations of GO solution to embed GO on the surface of plant fibers. The GO was dispersed in the PUF using straw fibers. In addition, some studies show that the wrinkled morphology of the GO surface is believed to play a mechanical interlocking role in improving interfacial bonding, thus enhancing the stress transfer between the plant fibers and the polyurethane (PU) matrix and improving the mechanical properties of the PU composites. The acoustic and mechanical properties of the modified PU materials were observed by treating plant fibers with appropriate amounts of GO solution. The experimental study shows that the sample modified with 1 g L −1 GO solution reaches a maximum average sound absorption coefficient of 0.5838 when the straw fiber content reaches 0.5 g, and the sample modified with 2 g L −1 GO solution reaches a maximum transmission loss of 10.5333 when the straw fiber content reaches 1 g. © 2022 Society of Industrial Chemistry.

Yang, Keyao↗

Surface modification of ZIF ‐90 with triptycene for enhanced interfacial interaction in mixed‐matrix membranes for gas separation

Abstract Zeolite imidazole framework (ZIF‐90) nanoparticles were chemically modified by grafting triptycene moieties. The modified nanoparticles were introduced into a triptycene‐based polyimide as fillers to generate mixed matrix membranes (MMMs) for gas separation. The incorporation of “hook‐like” triptycene moieties in both dispersed and continuous phases led to intimate contact between the two phases and thus defect‐free interfacial morphology, due to the supramolecular interlocking and π–π stacking interaction between triptycene units presented in both phases. The filler/polymer solution showed shear thickening behavior due to such strong interfacial interaction. The separation performance of the prepared composite membranes was investigated as a function of filler loading and particle surface grafting density. Pure‐gas permeation results showed that the gas permeabilities increased expectedly as the filler loading increased, with stable or improved selectivities. The reduced permeability relative to pristine polyimide film is likely due to the pore blockage of ZIF‐90 upon grafting triptycene moieties on the particle surface. Reducing the grafting density of triptycene moieties led to improved permeability and selectivity suggesting good tunability of this series of new composite membranes. Overall, modification of nanofiller with hierarchical triptycene moieties offers a fundamentally new avenue for creation of composite membranes with unique properties in gas separations.

Zhang, Qinnan↗

Joining AA7099 to Ni-Cr-Mo Steel using Friction Stir Dovetailing

Friction stir dovetailing (FSD) was used to join 0.5 inch (12.7 mm) AA7099 to 0.5 inch (12.7 mm) Ni-Cr-Mo steel in a lap configuration. Two new FSD approaches are reported that significantly reduce zinc embrittlement of Fe-Al intermetallic compounds (IMCs) which form during conventional friction stir welding (FSW). The first method uses the general FSD approach where a custom designed tool is employed to extrude the AA7099 into the pre-machined dovetail groove of underlying steel by forming mechanical interlocking and metallurgical bonding simultaneously. The second method uses a two-step approach where FSD of AA6061 is first used to form a silicon-rich Fe-Al IMC within the dovetail groove. AA7099 plate is then joined to the AA6061 within the dovetail using conventional FSW. A discussion of the new FSD technique, joint configurations, and process parameters are provided along with joint microstructural analyses and mechanical performance.

Friction stir dovetailing, FSD, AA7099, AA6061, ro↗

Joining of High Strength Low Ductility AA7055 by Friction Self-piercing Rivet

High strength aluminum (Al) alloy is one of higher specific strength materials for decarbonization in transportation industries. Because of low ductility at room temperature, conventional mechanical fastening such as self-piercing riveting produces cracks at the joint. In this work, we applied friction self-piercing riveting to join Al alloy (AA) 7055. No cracks were observed in the joints because of the improved local ductility of Al alloy by the generated frictional heat during joining step. Numerical modeling of joining process was applied to guide rivet geometry design and rivet material strength. Mechanical integrity of the AA7055 joints was assessed by lap shear tensile and cross-tension testing. Metallurgical characterizations revealed solid-state bonding formed not only between the rivet and surround Al materials, but also upper and lower Al sheets at the joint interface. Both solid-state bonding and mechanical interlocking between the flared rivet and bottom AA7055 sheet were the major joint mechanisms.

Lim, Yong Chae↗

Scale-Up of Friction Self-piercing Riveting Process for Multi-material Joints

A single-class joining process known as “friction self-piercing riveting (F-SPR)” has been developed for joining various low-ductility lightweight materials on a laboratory scale. The frictional heat generated during the F-SPR process improved local ductility, resulting in crack-free joints and robust mechanical performance. This innovative joining technology was further advanced through the scale-up of the process using a new system with several key features (e.g., automatic rivet feeding and clamping system, vacuum system) toward industry readiness. The new integrated F-SPR systems were effectively demonstrated for joining different material combinations (e.g., carbon fiber composite to 7075 Al alloy, 7075 Al alloy to 7075 Al alloy, and 7075 Al alloy to casting Al Aural 5) with a unified technique. Crack-free joint with adequate mechanical interlocking resulted in good mechanical joint strength for each material combination. Then, the process was successfully scaled up by producing multiple joints without any cracks on larger CFC-Al and Al-Al components by the new integrated system, bringing it closer to industrial application.

Lim, Yong Chae [ORNL] (ORCID:0000000321773988)↗

Mixed-Mode and Mode-II Fatigue Crack Growth in Woven Composites

In this work, a woven carbon/epoxy composite was subjected to fatigue crack growth under mixed Mode-I/Mode-II loading to obtain crack growth behavior at different cyclic strain energies. Owing to the woven structure of the material, pure Mode-II fracture is usually a difficult proposition because of friction, interference, and interlock of woven tows in adjacent plies at an interlaminar crack. These limitations were overcome by the use of a novel form of mixed Mode-I/Mode-II specimen, which imposes sufficient crack surface opening (Mode-I) to alleviate ply-ply interactions, but not so much as to obscure the sliding (Mode-II) response. Finally, comparison with pure Mode-I fatigue crack growth data, in conjunction with a fracture interaction criterion, provided a means to extract the Mode-II behavior.

36 MATERIALS SCIENCE↗

Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process

Solid-state joining of thick section aluminum to steel plate has been achieved using a new process called Friction Stir Dovetailing (FSD). In FSD, a custom designed pin tool is used to flow a lower melting point material (AA6061) into dovetail grooves machined into the surface of an underlying higher melting point material (Rolled Homogeneous Armor – RHA). Repeating dovetails form a mechanical interlocking structure akin to metallic Velcro. In this study, AA6061 sections ranging in thickness from 1.5” to 3.0” are joined to 0.5” thick RHA plates. The effectiveness of FSD is demonstrated through tensile test data which shows specimens failing in the processed aluminum rather than at the joint interface. Numerical simulations are presented which highlight the importance of optimizing dovetail geometry. The effect of process parameters on joint strength, microstructure, and hardness are also discussed.

dissimilar metals joining↗

Topology optimization for the full-cell design of porous electrodes in electrochemical energy storage devices

In this paper, we introduce a density-based topology optimization framework to design porous electrodes for maximum energy storage. We simulate the full cell with a model that incorporates electronic potential, ionic potential, and electrolyte concentration. The system consists of three materials, namely pure liquid electrolyte and the porous solids of the anode and cathode, for which we determine the optimal placement. We use separate electronic potentials to model each electrode, which allows interdigitated designs. As a result, a penalization is required to ensure that the anode and cathode do not touch, i.e., causing a short circuit. We compare multiple 2D designs generated for different fixed conditions, e.g. material properties. A 3D design with complex channel and interlocked structure is also created. All optimized designs are far superior to the traditional monolithic electrode design with respect to energy storage metrics. We observe up to a 750% increase in energy storage for cases with slow effective ionic diffusion within the porous electrode.

25 ENERGY STORAGE↗

Surface engineering to enhance heat generation and joint strength in dissimilar materials AZ31 and DP590 ultrasonic welding

A multiscale simulation approach was developed and employed to optimize the sheet surface conditions for higher interfacial temperature and joint strength in ultrasonic welding of magnesium alloy AZ31 and dual-phase steel DP590. First, a mesoscale model was used to study the relationship between friction coefficient and surface roughness, which can be modified by various engineering methods. Then a macroscopic process model was employed to study the effects of surface roughness on heat generation, indicating that a temperature increase can be achieved with rougher surfaces on two sides of both DP590 and AZ31 sheets. Samples prepared by sanding and filing, as well as grinding, were first characterized for surface roughness and then welded under ultrasonic vibration. An infrared camera was used to measure temperatures in situ for model validation. Overall, lap shear test results for the welded joint showed that the joint strength can be improved by 10~25% using filing and round grinding methods as a result of the enhanced heat generation and mechanical interlocking on the interface.

42 ENGINEERING↗

Dissimilar material joining of densified superwood to aluminum by adhesive bonding

Abstract Superwood is a densified wood product that shows promise as a lightweight and renewable alternative for metallic materials. In order for this high-performance new material to be used in multi-material products, it must be able to be joined with other major materials. For example, joining superwood to aluminum would provide a key enabling technology for its use in automotive components since aluminum is presently a major lightweight material for such applications. In this paper, a methacrylate-based adhesive has been identified to provide high lap shear strength (7.5 MPa) for aluminum-to-superwood joints. The aluminum-to-superwood samples were prepared with different amounts of pre-polishing to create openings to the pores in the superwood so adhesive could penetrate into them and create a mechanical interlock, in addition to the hydrogen/chemical bonding at the surface between the methyl methacrylate (MMA) in methacrylate-based adhesive and the cellulose in superwood. For aluminum samples, a thin layer (typically a few nanometers) of oxide film on the surfaces provides hydrogen/chemical bond to MMA structure in the adhesive layer. The failure strength of the superwood-to-aluminum joint sample is about 50% higher than that of natural wood to natural wood joint sample and comparable to that of aluminum-to-aluminum joint sample.

Automation & Control Systems↗

Transcatheter Coil Embolization of Splenic Artery Aneurysm

The purpose of this study was to evaluate clinical results and technical problems of transcatheter coil embolization for splenic artery aneurysm. Subjects were 16 patients (8 men, 8 women; age range, 40-80 years) who underwent transcatheter embolization for splenic artery aneurysm (14 true aneurysms, 2 false aneurysms) at one of our hospitals during the period January 1997 through July 2005. Two aneurysms (12.5%) were diagnosed at the time of rupture. Multiple splenic aneurysms were found in seven patients. Aneurysms were classified by site as proximal (or strictly ostial) (n = 3), middle (n = 3), or hilar (n = 10). The indication for transcatheter arterial embolization was a false or true aneurysm 20 mm in diameter. Embolic materials were fibered coils and interlocking detachable coils. Embolization was performed by the isolation technique, the packing technique, or both. Technically, all aneurysms were devascularized without severe complications. Embolized aneurysms were 6-40 mm in diameter (mean, 25 mm). Overall, the primary technical success rate was 88% (14 of 16 patients). In the remaining 2 patients (12.5%), partial recanalization occurred, and re-embolization was performed. The secondary technical success rate was 100%. Seven (44%) of the 16 study patients suffered partial splenic infarction. Intrasplenic branching originating from the aneurysm was observed in five patients. We conclude that transcatheter coil embolization should be the initial treatment of choice for splenic artery aneurysm.

62 RADIOLOGY AND NUCLEAR MEDICINE↗