SEARCH · Search NASA

Results for “ISOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Report on objective ride quality evaluation

The correlation of absorbed power as an objective ride measure to the subjective evaluation for the bus data was investigated. For some individual bus rides the correlations were poor, but when a sufficient number of rides was used to give reasonable sample base, an excellent correlation was obtained. The following logarithmical function was derived: S = 1.7245 1n (39.6849 AP), where S = one subjective rating of the ride; and AP = the absorbed power in watts. A six-degree-of-freedom method developed for aircraft data was completed. Preliminary correlation of absorbed power with ISO standards further enhances the bus ride and absorbed power correlation numbers since the AP's obtained are of the same order of magnitude for both correlations. While it would then appear that one could just use ISO standards, there is no way to add the effect of three degrees of freedom. The absorbed power provides a method of adding the effects due to the three major directions plus the pitch and roll.

Wambold, J. C.↗

NASA NTRS1975

Ride quality criteria and the design process

Conceptual designs for advanced ground transportation systems often hinge on obtaining acceptable vehicle ride quality while attempting to keep the total guideway cost (initial and subsequent maintenance) as low as possible. Two ride quality standards used extensively in work sponsored by the U.S. Department of Transportation (DOT) are the DOT-Urban Tracked Air Cushion Vehicle (UTACV) standard and the International Standards Organization (ISO) reduced ride comfort criteria. These standards are reviewed and some of the deficiencies, which become apparent when trying to apply them in practice, are noted. Through the use of a digital simulation, the impact of each of these standards on an example design process is examined. It is shown that meeting the ISO specification for the particular vehicle/guideway case investigated is easier than meeting the UTACV standard.

Ravera, R. J.↗

NASA NTRS1977

Atomic oxygen between 80 and 120 km: Evidence for a rapid spatial variation in vertical transport near the ionosphere

Analysis of OGO-6 OI green line photometer results was carried out for 8 cases when the alignment of the spacecraft was such that local emission rates could be determined below the altitude of maximum emission and down to about 80 km. Results show a variation on a scale of 6 deg to 8 deg in latitude between regions where the emission rate increases rapidly between 90 and 95 km and regions where it increases slowly from 80 km to 95 km. Latitude-altitude maps of iso-emissivity contours and iso-density contours for oxygen concentration are presented. The latter are computed under 3 assumptions concerning excitation mechanisms. Comparisons of the spatial variations of oxygen density with the results of a time dependent theory suggest the regions of strong downward transport alternate on a scale of about 1000 km with regions of weak transport near 90 km. In the first case conversion of O to O3 at night appears to be overwhelmed by downward transport of O.

Donahue, T. M.↗

NASA NTRS1983

Networking DEC and IBM computers

Local Area Networking of DEC and IBM computers within the structure of the ISO-OSI Seven Layer Reference Model at a raw signaling speed of 1 Mops or greater are discussed. After an introduction to the ISO-OSI Reference Model nd the IEEE-802 Draft Standard for Local Area Networks (LANs), there follows a detailed discussion and comparison of the products available from a variety of manufactures to perform this networking task. A summary of these products is presented in a table.

Mish, W. H.↗

NASA NTRS1983

Interior noise and vibration measurements on operational military helicopters and comparisons with various ride quality criteria

The results of physical measurements of the interior noise and vibration obtained within eight operational military helicopters are presented. The data were extensively analyzed and are presented in the following forms: noise and vibration spectra, overall root-mean-square acceleration levels in three linear axes, peak accelerations at dominant blade passage frequencies, acceleration exceedance data, and overall and ""A'' weighted sound pressure levels. Peak acceleration levels were compared to the ISO 1-hr reduced comfort and fatigue decreased proficiency boundaries and the NASA discomfort criteria. The ""A'' weighted noise levels were compared to the NASA annoyance criteria, and the overall noise spectra were compared to MIL-STD-1294 (""Acoustical Noise Limits in Helicopters''). Specific vibration components at blade passage frequencies for several aircraft exceeded both the ISO reduced comfort boundary and the NASA passenger discomfort criteria. The ""A'' weighted noise levels, corrected for SPH-4 helmet attenuation characteristics, exceeded the NASA annoyance threshold for several aircraft.

Clevenson, S. A.↗

NASA NTRS1984

A High-performance Hybrid RF Isolation Amplifier

A high-performance hybrid RF Isolation Amplifier (Iso-Amp) has been developed at JPL. The circuit exhibits a unique combination of RF characteristics at performance levels exceeding those of any commercially available device. Recent improvments in the design have resulted in significantly higher reverse isolation, a four-fold increase in bandwidth and improve reliability. These devices are very useful in RF and IF signal conditioners, instrumentation, and signal generation and distribution equipment. These Iso-Amps should find wide application in future DSN and R&D RF systems.

Stevens, G. L.↗

NASA NTRS1986

Radioactivities in returned lunar materials and in meteorites

A preliminary C-14 study on lunar soil was carried out with the University of Toronto Iso Trace accelerator mass spectrometer. This accelerator was recommended for C-14 work by Dr. R. Schneider of A.S. and E., who was the field engineer during the assemblage and start-up operation of the accelerator. After the preliminary study using CO2 from 10084,937 soil, which had previously been counted with low-level mini-proportional counters, it became clear that the Toronto accelerator could carry out C-14/C-13/C-12 ratio measurements on 1 gram meteorite and lunar samples and that the C-14 measurements are done with higher precision and better reliability than elsewhere. A collaborative program with the University of Toronto Iso Trace accelerator group, which is expected to be scientifically fruitful. Arrangements have been made for Dr. R.P. Beukens of the Toronto Accelerator Group to extract the carbon compounds from Antarctic meteorite and lunar samples and to convert the compounds to CO2. During the past two years, a uranium-series dating method was developed for polar ice, which method is being applied to ice from the Allan Hills site, Byrd core, and the Beardsmore glacier.

Fireman, E. L.↗

NASA NTRS1985

The Imaging Spectrometric Observatory

Design and performance features of the Imaging Spectrometric Observatory (ISO) first flown on Spacelab 1 for atmospheric, earth surface and stellar monitoring are outlined. The ISO has five grating spectrometers fitted with CCD arrays for simultaneously gathering spectral and spatial data. The instrument covered the 300-12,700 A range on the Spacelab 1 flight, when it was mounted on a pallet and used for atmospheric scans at high solar zenith angles. A future mission is planned which will include limb-viewing of OH, NO, ClO and NO2 radicals in the middle atmosphere to complement the data collected in the Upper Atmosphere Research Satellite program. Technical details are presented of the instrument components and ground- and balloon-borne test results.

Torr, D. G.↗

NASA NTRS1988

Experimental verification of the thermodynamic properties for a jet-A fuel

Thermodynamic properties for a Jet-A fuel were determined by Shell Development Company in 1970 under a contract for NASA Lewis Research Center. The polynomial fit necessary to include Jet-A fuel (liquid and gaseous phases) in the library of thermodynamic properties of the NASA Lewis Chemical Equilibrium Program is calculated. To verify the thermodynamic data, the temperatures of mixtures of liquid Jet-A injected into a hot nitrogen stream were experimentally measured and compared to those calculated by the program. Iso-octane, a fuel for which the thermodynamic properties are well known, was used as a standard to calibrate the apparatus. The measured temperatures for the iso-octane/nitrogen mixtures reproduced the calculated temperatures except for a small loss due to the non-adiabatic behavior of the apparatus. The measurements for Jet-A were corrected for this heat loss and showed excellent agreement with the calculated temperatures. These experiments show that this process can be adequately described by the thermodynamic properties fitted for the Chemical Equilibrium Program.

Graciasalcedo, Carmen M.↗

NASA NTRS1989

International standards activities in image data compression

Integrated Services Digital Network (ISDN); coding for color TV, video conferencing, video conferencing/telephone, and still color images; ISO color image coding standard; and ISO still picture standard are briefly discussed. This presentation is represented by viewgraphs only.

Haskell, Barry↗

NASA NTRS1989

The mechanism for the scale selection of tropical intraseasonal oscillations. I - Selection of wavenumber 1 and the three-scale structure

The mechanism for the scale selection of tropical intraseasonal oscillations (ISO), was investigated using two models which differed only in the cumulus parameterization. In the first, more complicated model, moisture budgets are treated explicitly, and the cumulus parameterization of Kuo (1974) is used. Using this model, the ISO with the wavenumber 1 structure was successfully reproduced, and some possible nonlinear causes for the selection of wavenumber 1 were specified. The second model does not employ moisture; in this model, cumulus convection is related to low-level convergence only. The three possible causes obtained in the first experiment were parameterized, and could be added to or eliminated from the second model, making it possible to determine which nonlinear property was essential for the mechanism of the wavenumber selection.

Itoh, Hisanori↗

NASA NTRS1989

The deceleration of infalling plasma in magnetized neutron star atmospheres - Nonisothermal atmospheres

This paper examines the deceleration of accreting material in the strongly magnetized plasma atmosphere of an X-ray pulsar, for accretion rates less than 0.1 times the Eddington flux. The previous work on accretion, flow deceleration is extended to nonisothermal atmospheres. A rough model of radiative processes in neutron star atmospheres bombarded by accreting material is used to calculate the atmosphere's temperature and density profiles. The atmospheric structure and the accretion flow stopping depth are computed iteratively. For cases where the infall velocity is close to the free-fall velocity, a simple prescription for an equivalent single temperature, T(iso), is given. It is found that the plasma deceleration is close to stopping in a homogeneous, isothermal atmosphere at T(iso). Exceptions to this result occur for small infall velocities.

Miller, Guy↗

NASA NTRS1989

The next 40 years in space standards

Methods used in producing, introducing, and using standards for civilian space research are examined, with special consideration given to the recommendations of the Consultative Committee for Space Data Systems (CCSDS) as an example of a set of standards best coordinated through the International Standard Organization (ISO). The paper uses an example of earth-observation data as a CCSDS application for an international coordination effort within the ISO and describes progress in achieving this objective. Lists of CCDSD member agencies and CCSDS observer agencies are included.

Sheetz, H. J.↗

NASA NTRS1990

Space Cryogenic Workshop, 8th, California Institute of Technology, Pasadena, July 31, Aug. 1, 1989, Proceedings

Recent advances in cryogenic technology for space applications are examined in reviews and reports. Topics addressed include very-low-force cooling contacts for the ISO cryostat cover, convective heat flow in space cryogenics plugs, liquid-acquisition devices for superfluid He transfer, and pressure drop in the SHOOT superfluid-He acquisition system. Consideration is given to a liquid-He vibration cryostat for space qualification tests, closed-cycle coolers for temperatures below 30 K, stress analysis down to liquid-He temperature, a cryogenic valve actuator, and a spaceborne He-3 refrigerator. Also discussed are an adiabatic-demagnetization refrigerator for SIRTF, rejection of waste heat from O liquefaction operations at a lunar O production plant, SHOOT flowmeter and pressure transducers, and space qualification of the ISO cryogenic rupture disks.

Source record↗

NASA NTRS1991

Volumetric measurement of tank volume

A method is disclosed for determining the volume of compressible gas in a system including incompressible substances in a zero-gravity environment consisting of measuring the change in pressure (delta P) for a known volume change rate (delta V/delta t) in the polytrophic region between isothermal and adiabatic conditions. The measurements are utilized in an idealized formula for determining the change in isothermal pressure (delta P sub iso) for the gas. From the isothermal pressure change (delta iso) the gas volume is obtained. The method is also applicable to determination of gas volume by utilizing work (W) in the compression process. In a passive system, the relationship of specific densities can be obtained.

Walter, Richard T.↗

NASA NTRS1990

Evaluation plan for space station network interface units

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Weaver, Alfred C.↗

NASA NTRS1991

Technologies for unattended network operations

The necessary network management functions for a telecommunications, navigation and information management (TNIM) system in the framework of an extension of the ISO model for communications network management are described. Various technologies that could substantially reduce the need for TNIM network management, automate manpower intensive functions, and deal with synchronization and control at interplanetary distances are presented. Specific technologies addressed include the use of the ISO Common Management Interface Protocol, distributed artificial intelligence for network synchronization and fault management, and fault-tolerant systems engineering.

Jaworski, Allan↗

NASA NTRS1992

The synthetic infrared spectrum of Titan at high spectral resolution

A systematic study made of the observability of minor species in Titan's atmosphere is reported. This was done by modeling its thermal spectrum at 0.5/cm resolution under the conditions of the Infrared Space Observatory (ISO) and Composite Infrared Radiometer Spectrometer (CIRS), and by exploring the capabilities of the 0.03/cm resolution mode of ISO.

Coustenis, Athena↗