Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Thin-Film Paradigm to Probe Interfacial Diffusion during Solid-State Metathesis Reactions

We highlight a paradigm for studying complex reaction mechanisms that guide the synthesis of materials. Thin films of FeCl 2 and Na 2 S 2 were deposited to study the metathesis reaction to form FeS 2 and NaCl. In situ X-ray reflectivity was used to monitor the interface between materials, which revealed a slow, impeded reaction at high temperatures as compared to previous studies using powder samples. AC impedance and X-ray photoelectron spectroscopy provided insight into distribution of elements and conductivity of the phases present during the reaction, and phase-field modeling was used to elucidate the diffusion of ions throughout the thin-film bilayers. Here, the use of thin-film bilayers provides a simplified system to study solid-state metathesis reactions and highlights the complexity of diffusion at solid-state interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Local probe of bulk and edge states in a fractional Chern insulator

The fractional quantum Hall effect is a key example of topological quantum many-body phenomena, arising from the interplay between strong electron correlation, topological order and time-reversal symmetry breaking. Recently, a lattice analogue of the fractional quantum Hall effect at zero magnetic field has been observed, confirming the existence of a zero-field fractional Chern insulator (FCI). Despite this, the bulk–edge correspondence—a hallmark of a FCI featuring an insulating bulk with conductive edges—has not been directly observed. In fact, this correspondence has not been visualized in any system for fractional states owing to experimental challenges. Here we report the imaging of FCI edge states in twisted MoTe 2 (t-MoTe 2 ) using microwave impedance microscopy. By tuning the carrier density, we observe the system evolving between metallic and FCI states, the latter of which exhibits insulating bulk and conductive edges, as expected from the bulk–boundary correspondence. Further analysis suggests the composite nature of the FCI edge states. We also observe the evolution of edge states across the topological phase transition as a function of interlayer electric field and reveal exciting prospects of neighbouring domains with different fractional orders. Furthermore, these findings pave the way for research into topologically protected one-dimensional interfaces between various anyonic states at zero magnetic field, such as gapped one-dimensional symmetry-protected phases with non-zero topological entanglement entropy, Halperin–Laughlin interfaces and the creation of non-abelian anyons.

Imaging techniques↗
DOE OSTI2020

Surface Josephson plasma waves in a high-temperature superconductor

Abstract Electron density oscillations with acoustic dispersions and sustained at boundaries between different media provide information about surface and interface properties of heterostructures. In ultrathin metallic films these plasmonic excitations are heavily damped. Superconductivity is predicted to reduce dissipation allowing detection of these resonances. Emerging low-loss interface Cooper-pair waves have been studied before, however, the observation of surface-confined Josephson plasmons in highly anisotropic superconductors has remained elusive. Here, we report on generation and coupling to these excitations in an ultrathin single-crystal film of high-temperature superconductor La 1.85 Sr 0.15 CuO 4 . The film becomes brighter than Au below the critical temperature when probed with sub-gap THz photons. We show that the enhanced signal in the superconducting state, which can be visualized with a spatial resolution better than λ/3000, originates from near-field coupling of light to surface Josephson plasmons. Our results open a path towards non-invasive investigation of enhanced superconductivity in artificial multilayers, buried interface states in topological heterostructures, and non-linear phenomena in Josephson devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Coupling, lifetimes, and “strong coupling” maps for single molecules at plasmonic interfaces

The interaction between excited states of a molecule and excited states of a metal nanostructure (e.g., plasmons) leads to hybrid states with modified optical properties. When plasmon resonance is swept through molecular transition frequency, an avoided crossing may be observed, which is often regarded as a signature of strong coupling between plasmons and molecules. Such strong coupling is expected to be realized when 2|$\langle$U$\rangle$|/ℏΓ > 1, where $\langle$U$\rangle$ and Γ are the molecule–plasmon coupling and the spectral width of the optical transition, respectively. Because both $\langle$U$\rangle$ and Γ strongly increase with decreasing distance between a molecule and a plasmonic structure, it is not obvious that this condition can be satisfied for any molecule–metal surface distance. Here, in this work, we investigate the behavior of $\langle$U$\rangle$ and Γ for several geometries. Surprisingly, we find that if the only contributions to Γ are lifetime broadenings associated with the radiative and nonradiative relaxation of a single molecular vibronic transition, including effects on molecular radiative and nonradiative lifetimes induced by the metal, the criterion 2|$\langle$U$\rangle$|/ℏΓ > 1 is easily satisfied by many configurations irrespective of the metal–molecule distance. This implies that the Rabi splitting can be observed in such structures if other sources of broadening are suppressed. Additionally, when the molecule–metal surface distance is varied keeping all other molecular and metal parameters constant, this behavior is mitigated due to the spectral shift associated with the same molecule–plasmon interaction, making the observation of Rabi splitting more challenging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Shock-driven kinetic and diffusive mix in high-Z pusher ICF designs

Revolver and Double Shell Inertial Confinement Fusion capsule designs hope to achieve a robust volumetric thermonuclear burn via the use of a high-Z pusher shell filled with a cryogenic D–T fuel. Unfortunately, mix of the pusher material into the fuel (gas) may adversely impact the burn performance. Hydrodynamic instability of the metal/gas interface as the mix source is an obvious concern, but 1D effects may also be detrimental. Such effects include plasma diffusion at material interfaces, which has been the subject of numerous theoretical, computational, and experimental investigations. However, other 1D mix mechanisms may exist, which have yet to be thoroughly explored. In particular, plasma kinetic effects may drive the mix when a shock breaks out of the metal/gas interface. Using the state-of-the-art, hybrid (kinetic-ion/fluid electron), multi-ion Vlasov–Fokker–Planck code, iFP, we show herein that shock-driven kinetic effects can reconfigure the interface and the interfacial width subsequently grows diffusively. Finally, we consider any implications for high-Z pusher designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Effect of H + Exchange and Surface Impurities on Bulk and Interfacial Electrochemistry of Garnet Solid Electrolytes

Contact loss and current constriction pose significant challenges at the Li metal interface of solid-state batteries. For garnet-structured Li 7 La 3 Zr 2 O 12 (LLZO), these effects are amplified by Li + /H + exchange and surface contamination reactions, which lead to conductivity losses and poor Li wetting. In this study, we utilize a variety of surface treatment processes across 37 cells to selectively induce proton exchange and contamination reactions in LLZO. The resulting bulk and surface chemistry is systematically characterized and correlated to changes in electrochemical properties. Additionally, we combine impedance analysis and finite element method modeling to deconvolute sources of impedance contributions at the Li metal interface. Specifically, we show that constriction impedance at the Li metal interface arises not solely from voids, but also from ionically-resistive surface contaminants. Further, these findings emphasize the connection between ionic conductivity and constriction, demonstrating that micron-scale ionically-resistive components increase constriction even with identical contact geometries. Finally, we leverage our comprehensive dataset to highlight unstable overpotential growth as a failure mechanism, additionally showing that the phase of a cell’s impedance is a sensitive indicator for the onset of interfacial instability. Overall, this study clarifies the impacts of proton exchange and surface contamination on electrochemical properties at the Li|solid electrolyte interface and elucidates insights that are generalizable to other solid-state battery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Signatures of a spin-active interface and a locally enhanced Zeeman field in a superconductor-chiral material heterostructure

A localized Zeeman field, intensified at heterostructure interfaces, could play a crucial role in a broad area including spintronics and unconventional superconductors. Conventionally, the generation of a local Zeeman field is achieved through magnetic exchange coupling with a magnetic material. However, magnetic elements often introduce defects, which could weaken or destroy superconductivity. Alternatively, the coupling between a superconductor with strong spin-orbit coupling and a nonmagnetic chiral material could serve as a promising approach to generate a spin-active interface. Here, we leverage an interface superconductor, namely, induced superconductivity in noble metal surface states, to probe the spin-active interface. Our results unveil an enhanced interface Zeeman field, which selectively closes the surface superconducting gap while preserving the bulk superconducting pairing. The chiral material, i.e., trigonal tellurium, also induces Andreev bound states (ABS) exhibiting spin polarization. The field dependence of ABS manifests a substantially enhanced interface Landég-factor (g eff ~ 12), thereby corroborating the enhanced interface Zeeman energy.

Science & Technology - Other Topics↗
DOE OSTI2025

Tetracene Functionalized Si(111) Achieves Enhanced Solar-to-Chemical Energy Conversion via Molecular Acceptor States

The properties of semiconductor|liquid interfaces play a critical role in determining the efficiency of solar-to-hydrogen (STH) conversion. Here, we investigate how molecular functionalization of Si(111) and Si(111)|TiO 2 surfaces impacts photoelectrochemical (PEC) hydrogen production efficiency. We find that functionalization of ∼3% of the atop sites of Si(111) with either 9-anthracene (Anth) or 5-tetracene (Tet), with the remaining sites passivated by methyl groups, provides substrates with high electronic quality and low surface oxide densities, as determined by X-ray photoelectron spectroscopy (XPS) measurements. Surface photovoltage (SPV) spectroscopy shows that surfaces modified with Anth or Tet exhibit an increased photovoltage, with Tet-functionalized surfaces yielding an additional 192 meV relative to methyl-terminated Si(111), indicating improved charge separation for Si-Tet. Further improvement in onset potential was achieved by replacing a nitrogen-containing TiO 2 atomic layer deposition (ALD) precursor (TDMAT) with a precursor lacking nitrogen (TTIP), which eliminates the parasitic defect band in the TiO 2 overlayer (p-Si(111)-Tet|TTIP-TiO 2 |Pt: V OC = +0.283 ± 0.041 V vs RHE). Density functional theory (DFT) analysis demonstrates that compared with Anth-modified Si(111), the Tet-modified surface exhibits more hybridized Si(111)-Tet states closer to the silicon band edges. Mercury contact current–voltage (I–V, dark) measurements quantified the relative interfacial density of states of Si-Tet, Si-Anth and Si-Me surfaces─revealing that the interfacial state density was highest for Si-Tet. This suggests that such hybridized interfaces serve to capture better photoexcited charge, which enables facile electron transfer to molecular acceptors in solution. Altogether, the data indicate that beneficial hybrid molecular LUMO surface states interacting with the Si conduction band edge results in improved hydrogen evolution (HER) performance for p-Si devices.

Group theory↗
DOE OSTI2020

(S)TEM/EDS study of native precipitates and irradiation induced Nb-rich platelets in high-burnup M5®

We have investigated microstructure and microchemistry of precipitates and dislocation loops in high-burnup M5® using (scanning) transmission electron microscopy ((S)TEM) equipped with energy dispersive X-ray spectroscopy (EDS). Two (S)TEM lamellae were made by cryo-FIB from the same cladding sample. The Nb-rich native precipitates were found in the metal, in the suboxide and in the oxide. Upon diffraction analysis, most of the Nb-rich native precipitates in the metal matrix remain as β-Nb phase, while no β-Nb native precipitates were found in the oxide. Nearby the oxide and metal (O/M) interface, the native precipitates in the oxide were already oxidized into t-NbO2 phase. At further distance away from the O/M interface, the Nb-rich native precipitates were gradually oxidized and became amorphous. Besides the native precipitates, Nb-rich irradiation induced precipitates (IIPs) were found in the metal matrix. Using g = <0002> vector for imaging, the length of the IIPs was aligned with dislocation loops. However, no Nb segregation to the dislocation loops themselves was observed. For the first time, we report that IIPs indeed exist in the oxide but only within about 1.5 µm away from O/M interface. However, the oxidation state of the IIPs in the oxide is still unclear. The presence of both native precipitates and IIPs in the oxide may indicate the Nb concentration in the oxide solid solution remain low nearby the O/M interface, which may explain the reduced corrosion kinetics of in-pile M5®. On the other hand, no IIPs were observed in the oxide at further distance and this may indicate that they have eventually dissolved back into the oxide. A few mechanisms related to IIPs stability in the oxide are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Mitigation of nitrogen vacancy photoluminescence quenching from material integration for quantum sensing

The nitrogen-vacancy (NV) color center in diamond has demonstrated great promise in a wide range of quantum sensing. Recently, there have been a series of proposals and experiments using NV centers to detect spin noise of quantum materials near the diamond surface. This is a rich complex area of study with novel nano-magnetism and electronic behavior, that the NV center would be ideal for sensing. However, due to the electronic properties of the NV itself and its host material, getting high quality NV centers within nanometers of such systems is challenging. Band bending caused by space charges formed at the metal-semiconductor interface force the NV center into its insensitive charge states. Here, we investigate optimizing this interface by depositing thin metal films and thin insulating layers on a series of NV ensembles at different depths to characterize the impact of metal films on different ensemble depths. We find an improvement of coherence and dephasing times we attribute to ionization of other paramagnetic defects. The insulating layer of alumina between the metal and diamond provide improved photoluminescence and higher sensitivity in all modes of sensing as compared to direct contact with the metal, providing as much as a factor of 2 increase in sensitivity, decrease of integration time by a factor of 4, for NV T 1 relaxometry measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Total ecosystem carbon stocks at the marine-terrestrial interface: Blue carbon of the Pacific Northwest Coast, United States

The coastal ecosystems of temperate North America provide a variety of ecosystem services including high rates of carbon sequestration. Yet, little data exist for the carbon stocks of major tidal wetland types in the Pacific Northwest, United States. We quantified the total ecosystem carbon stocks (TECS) in seagrass, emergent marshes, and forested tidal wetlands, occurring along increasing elevation and decreasing salinity gradients. The TECS included the total aboveground carbon stocks and the entire soil profile (to as deep as 3 m). TECS significantly increased along the elevation and salinity gradients: 217 ± 60 Mg C/ha for seagrass (low elevation/high salinity), 417 ± 70 Mg C/ha for low marsh, 551 ± 47 Mg C/ha for high marsh, and 1,064 ± 38 Mg C/ha for tidal forest (high elevation/low salinity). Soil carbon stocks accounted for >98% of TECS in the seagrass and marsh communities and 78% in the tidal forest. Soils in the 0–100 cm portion of the profile accounted for only 48%–53% of the TECS in seagrasses and marshes and 34% of the TECS in tidal forests. Thus, the commonly applied limit defining TECS to a 100 cm depth would greatly underestimate both carbon stocks and potential greenhouse gas emissions from land-use conversion. The large carbon stocks coupled with other ecosystem services suggest value in the conservation and restoration of temperate zone tidal wetlands through climate change mitigation strategies. However, the findings suggest that long-term sea level rise effects such as tidal inundation and increased porewater salinity will likely decrease ecosystem carbon stocks in the absence of upslope wetland migration buffer zones.

Kauffman, J Boone↗
DOE OSTI2021

RG217 V2-V2 Coaxial Cable Acceptance Test

The ECSE Solid State Pulsed Power unit is a high current, high power solid-state pulse modulator. The RG217 V2-V2 Coaxial Cable Assembly is the interface cable between the Solid State Pulser and the load. This document covers the testing procedure for the RG217 V2-V2 Coaxial Cable Assembly. This assembly is comprised of RG217 Coaxial Cable with a LRU Connector on either end. This test procedure verifies the cable is undamaged and assembled correctly, the correct cable connectors are installed properly onto the cable, and that the entire assembly meets conductivity and holdoff voltage requirements. This procedure will verify that the RG217 Coaxial Cable Assembly meets all assembly and functional requirements. In particular, this procedure verifies the Cable Shield and Center Conductor meet conductivity requirements by testing their resistances. Additionally, this procedure ensures the RG217 Coaxial Cable Assembly meets holdoff voltage requirements by applying high voltage and verifying the RG217 Coaxial Cable Assembly does not experience any breakdowns or arcing.

42 ENGINEERING↗
DOE OSTI2021

RG217 V2-V2 Coaxial Cable Soldering Procedure

The ECSE Solid State Pulsed Power unit is a high-current, high power solid-state pulse modulator. The RG217 V2-V2 Coaxial Cable Assembly is the interface cable between the Solid State Pulser and the load. This document covers the soldering procedure for the RG217 V2-V2 Coaxial Cable Assembly. This assembly is comprised of RG217 Coaxial Cable with a LRU Connector on either end. This soldering procedure describes the process used to solder cable tips properly onto the cable center conductor.

42 ENGINEERING↗
DOE OSTI2021

RG217 V2-V2 Coaxial Cable Assembly Procedure

The ECSE Solid State Pulsed Power unit is a high-current, high power solid-state pulse modulator. The RG217 V2-V2 Coaxial Cable Assembly is the interface cable between the Solid State Pulser and the load. This document covers the assembly procedure for the RG217 V2-V2 Coaxial Cable Assembly. This assembly is comprised of RG217 Coaxial Cable with a LRU Connector on either end. This assembly procedure describes the process used to install cable connectors properly onto the cable.

42 ENGINEERING↗
DOE OSTI2019

Elucidating Interfacial Phenomena between Solid-State Electrolytes and the Sulfur-Cathode of Lithium–Sulfur Batteries

Sulfide solid-state electrolytes are promising materials to be used in Li–S batteries because they have the potential to mitigate some of the challenges currently faced by this technology such as the dissolution of polysulfide species and the flammability of conventional organic-based electrolytes. Nevertheless, the electrode/electrolyte interfaces are not well-understood yet. In this study, we use density functional theory and ab initio molecular dynamics simulations to investigate the formation of the cathode–electrolyte interface at two limiting states of charge: S 8 and Li 2 S. β-Li 3 PS 4 and two lithium halide-doped sulfides (Li 6 PS 5 Cl and Li 7 P 2 S8I) were selected because of their Li-ion superionic conductivity and compatibility with sulfur electrodes. The work of adhesion and interfacial energy of the interfaces were calculated as descriptors of the interfacial properties, and then the mechanisms of the interfacial reactions taking place were characterized. Lastly, a charge transfer analysis is presented, suggesting that, overall, the S 8 electrode will oxidize the electrolyte, whereas the fully discharged Li 2 S cathode will reduce it at different extents depending on the reactivity of the exposed facet.

25 ENERGY STORAGE↗
DOE OSTI2022

Long–Cycling Sulfide–Based All–Solid–State Batteries Enabled by Electrochemo–Mechanically Stable Electrodes

Anode significantly determines the energy density of all-solid-state Lithium batteries (ASLBs). Silicon (Si) and Lithium (Li) metal are two of the most attractive anodes because of their ultrahigh theoretical capacities. However, most investigations focus on Li metal; the great potential of Si is underrated. This study investigates Si anode's stability, processability, and cost in ASLBs and compares them with Li metal. Moreover, the single-crystal LiNi 0.8 Co 0.1 Mn 0.1 O 2 is stabilized with a lithium silicate (Li 2 SiO x ) through a scalable sol-gel method. ASLBs with a cell-level energy density of 285 Wh kg -1 are obtained through sandwiching Si anode, thin sulfide solid-state electrolyte membrane, and interface stabilized LiNi 0.8 Co 0.1 Mn 0.1 O 2 . The full cell delivered a high capacity of 145 mAh g -1 at C/3 and maintained stability for 1000 cycles. This work inspires commercializing the ASLBs on a large scale with exciting manufacturing lines for large-scale, safe, and economical energy storage.

25 ENERGY STORAGE↗
DOE OSTI2026

Dynamically reconfigurable topological routing in nonlinear photonic systems

The propagation path of topologically protected states is bound to the interface between regions with different topology, and as such, the functionality of linear photonic devices leveraging these states is fixed during fabrication. Here, we propose a mechanism for dynamic control over a driven dissipative system’s local topology, yielding reconfigurable topological interfaces and thus tunable paths for protected routing. We illustrate our approach in non-resonantly pumped polariton lattices, where the nonlinear interaction between the polaritons and the exciton reservoir due to non-resonant pumping can yield picosecond-scale changes in the propagation paths of the chiral edge states. To analytically confirm the numerically observed topological dynamics, we generalize the spectral localizer framework to non-linear non-Hermitian Chern materials and apply this framework to a continuous model of the polariton system based on a driven-dissipative Gross-Pitaevskii equation. In doing so, we show that the local changes in the polariton lattice’s topology are captured by a local Chern marker. Looking forward, we anticipate such reconfigurable topological routing will enable the realization of novel classes of topological photonic devices.

Wong, Stephan [Sandia National Laboratories (SNL-N↗
DOE OSTI2026

NiFeCo-based catalysts in high current zero-gap anion exchange membrane water electrolyzers

Understanding degradation mechanisms in pure water anion exchange membrane water electrolyzers is essential for developing durable and precious metal-free hydrogen production systems, yet electronic, chemical, and transport-driven pathways often occur simultaneously at the anode. To separate these effects, we establish a morphology invariant Ni/Fe/Co thin film model catalyst platform using physical vapor deposition and systematically compare composition-dependent behavior under both pure water and 0.1 M KOH feeds. Devices were operated under industrially relevant current density conditions, galvanostatically at 1 A cm −2 for 24 hours; metal dissolution, ionomer oxidation, and resistance growth were quantified using inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy. Under pure-water operation, Ni-rich films showed voltage increases that correlated with rising total cell resistance (ΔV ≈ 243 mV, ΔR ≈ 0.17 Ω cm 2 ). Co-rich films maintained near constant voltages with minimal resistance change (ΔV < 10 mV, ΔR ≈ 0.03 Ω cm 2 ) but induced pronounced ionomer oxidation observed by XPS. In 0.1 M KOH, ionomer oxidation is suppressed, and impedance growth is minimized (<0.08 Ω cm 2 ) across all compositions, consistent with reduced transport limitations and improved ionic conduction relative to pure-water feeds. These results demonstrate how a controlled thin film model platform can isolate composition electrolyte relationships and provide mechanistic design principles for stable pure water anion exchange membrane electrolyzers.

Milenia Rojas Mendoza, B. [Stanford Univ., CA (Uni↗