Search NASA⌕ Search

SEARCH · Search NASA

Results for “Johnson Space Center”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Nanotube Production and Applications at Johnson Space Center

Promise of applications of carbon nanotubes has led to an intense effort at NASA/JSC, especially in the area of nanotube composites. Using the extraordinary mechanical strength of nanotubes, NASA hopes to design this revolutionary lightweight material for use in aerospace applications. Current research focuses on structural polymeric materials to attempt to lower the weight of spacecraft necessary for interplanetary missions. Other applications of nanotubes are also of interest for energy storage, gas storage, nanoelectronics, field emission, and biomedical applications. In pursuit of these goals, we have set up both laser and arc production processes for nanotubes. An in-depth diagnostic study of the plasma plume in front of the laser target has been studied to try to determine nanotube growth mechanisms. Complementary studies of characterization of nanotube product have added to knowledge of growth conditions. Results of our preliminary experiments in incorporating nanotubes into composites will be presented. Morphology and mechanical properties of the nanotubes composites will be discussed.

Nikolaev, Pavel↗
NASA NTRS1996

Intelligent Highway System

Under contract to the Texas Department of Transportation, AlliedSignal Technical Services developed the Transportation Guidance System (TransGuide) used in San Antonio, Texas. The system monitors the passage of traffic over the sensors embedded in the roadways and detects incidents. Control center operators are alerted to the occurrence of an accident and the area of the occurrence is highlighted on a map display. TransGuide incorporates technology AlliedSignal developed under various contracts to NASA at Goddard Space Flight Center, Johnson Space Center and Jet Propulsion Laboratory, including the design of ground control centers.

Source record↗
NASA NTRS2004

Johnson Space Center's Role in a Sustainable Future

NASA scientists and many others are contributing to the growing knowledge of our Earth and its ecosystems. Satellites measure sea level rise, and changes in vegetation and air pollutants that travel between countries and continents. The U.S. federal government seeks to be a leader in environmental sustainability efforts through various Executive Orders and policies that save energy, reduce waste, and encourage less reliance on oil as an energy source. NASA, as an agency that is by nature focused on the future, has much to contribute to these efforts. The NASA mission is 'To understand and protect our home planet, to explore the universe and search for life, to inspire the next generation of explorers as only NASA can.' Pollution prevention, affirmative procurement and sustainable design are all programs that are under way at NASA. But more can be done. By sharing ideas and learning from other organizations as well as from the talented workforce we are a part of, JSC can improve its sustainability performance and spread the benefits to our community.

Ewert, Michael K.↗
NASA NTRS2004

NASA Johnson Space Center Mini AERCam texting with the GSS6560

GPS based programs at NASA-JSC are enumerated on page 1: Several Detailed Test Objectives (DTOs) flown on STS missions featuring GPS are the primary focus of the DTO: GANE on STS-77, RGPS RME on STS-80, ARPK on STS-84 & STS-86, SIGI DTOs on STS-88, STS-101 (SOAR and STS-108 (CRV); Shuttle program switching to GPS receivers for navigation sensor; International Space Station baselined with GPS based navigation and attitude determination. Operational since 2002; Crew return vehicle features GPS based navigation; Mini Autonomous Extravehicular Robotic Camera (AERCam) relies on precise real-time relative GPS for relative navigation. Shuttle GPS testing is narrated in page 2.

Cryan, Scott P.↗
NASA NTRS2007

Stardust Curation at Johnson Space Center: Photo Documentation and Sample Processing of Submicron Dust Samples from Comet Wild 2 for Meteoritics Science Community

Dust particles released from comet 81P/Wild-2 were captured in silica aerogel on-board the STARDUST spacecraft and successfully returned to the Earth on January 15, 2006. STARDUST recovered thousands of particles ranging in size from 1 to 100 micrometers. The analysis of these samples is complicated by the small total mass collected ( < 1mg), its entrainment in the aerogel collection medium, and the fact that the cometary dust is comprised of submicrometer minerals and carbonaceous material. During the six month Preliminary Examination period, 75 tracks were extracted from the aerogel cells , but only 25 cometary residues were comprehensively studied by an international consortium of 180 scientists who investigated their mineralogy/petrology, organic/inorganic chemistry, optical properties and isotopic compositions. These detailed studies were made possible by sophisticated sample preparation methods developed for the STARDUST mission and by recent major advances in the sensitivity and spatial resolution of analytical instruments.

Nakamura-Messenger, K.↗
NASA NTRS2006

Johnson Space Center Flight Medicine Clinic Experience

Being a member of the Flight Medicine Clinic (FMC) Staff is a great experience. I joined the FMC staff 2 years ago when I became part of the Kelsey-Seybold team. The FMC staff consists of Flight Surgeons, Family Clinic Physician, Nursing staff, Wellness Coordinator and Support staff. We serve as the Primary Care Physicians for the astronauts and their families and provide annual physicals for the retired astronauts. We have approximately 800 patients in the FMC. As the Family Clinic Physician, I care for the astronaut spouses and children and provide annual physicals for the retired astronauts. Since we have a small patient population, we have the opportunity to spend increased personal time with our patients, which I enjoy. We have a pretty healthy patient population, who are very interested in their overall health and preventive care. In preparation for a shuttle launch, our nursing staff assists the flight surgeons with the astronaut physical exams, which occur 10 days prior to launch and again 3 days after their return. We also provide Primary Contact physicals for the families and guests, who will be in close contact with shuttle crew members. During these physicals, we provide education, emphasizing the importance of preventing the spread of communicable diseases to shuttle crew members. Being a part of the Space Medicine Program is an honor. To know that you contribute in some way to our nation s Space Program is very special. (This article was prepared by Dr. Trela Landry, M.D. for inclusion in a Kelsey-Seybold newsletter on 25 OCT 2006.)

Landry, Trela↗
NASA NTRS2008

Space Shuttle Orbiter Atlantis Liquid Oxygen Pre-Valve Detent Roller Cracking Investigation

During routine inspections of the Space Shuttle s Main Propulsion System Liquid Oxygen (LO2) pre-valve, the mechanism provided to maintain the valve in the open position was found cracked. The mechanism is a Vespel roller held against the valve visor by a stack of Belleville springs. The roller has been found cracked 3 times. All three instances were in the same valve in the same location. There are 6 pre-valves on each orbiter, and only one has exhibited this problem. Every-flight inspections were instituted and the rollers were found to be cracked after only one flight. Engineers at Marshall Space Flight Center, Johnson Space Center, and Kennedy Space Center worked together to determine a solution. There were several possible contributors to the failure: a misaligned visor, an out-of-specification edge with a sharp radius, an out-of-specification tolerance stack up of a Belleville spring stack that caused un-predicted loads on the Vespel SP-21 roller, and a dimple machined into the side of the roller to indicate LO2 compatibility that created a stress riser. The detent assembly was removed and replaced with parts that were on the low side of the tolerance stack up to eliminate the potential for high loads on the detent roller. After one flight, the roller was inspected and showed fewer signs of wear and no cracks.

Holleman, Elizabeth↗
NASA NTRS2008

Space Shuttle Orbiter Atlantis Liquid Oxygen Prevalve Detent Roller Cracking Investigation

During routine inspections of the Space Shuttle's Main Propulsion System (MPS) Liquid Oxygen (LO2) pre-valve, the mechanism provided to maintain the valve in the open position was found cracked. The mechanism is a Vespel roller held against the valve visor by a stack of Belleville springs. The roller has been found cracked 3 times. All three instances were in the same valve in the same location. There are 6 pre-valves on each orbiter, and only one has exhibited this problem. Every-flight inspections were instituted and the rollers were found to be cracked after only one flight. Engineers at Marshall Space Flight Center, Johnson Space Center and Kennedy Space Center worked together to determine a solution. There were several possible contributors to the failure: a mis-aligned visor, an out of specification edge with a sharp radius, an out of specification tolerance stack up of a Belleville spring stack that caused un-predicted loads on the Vespel SP-21 roller, and a dimple machined into the side of the roller to indicate LO2 compatibility that created a stress riser. The detent assembly was removed and replaced with parts that were on the low-side of the tolerance stack up to eliminate the potential for high loads on the detent roller. After one flight, the roller was inspected and showed fewer signs of wear and no cracks.

Holleman, Elizabeth↗
NASA NTRS2009

NASA Johnson Space Center Medical Licensing Opportunities

This presentation reviews patented medical items that are available for licensing in the areas of Laboratory Technologies, Medical Devices, Medical Equipment and other technologies that are of interest to the medical community.

Hernandez-Moya, Sonia↗
NASA NTRS2010

Johnson Space Center Health and Medical Technical Authority

1.HMTA responsibilities: a) Assure program/project compliance with Agency health and medical requirements at identified key decision points. b) Certify that programs/projects comply with Agency health and medical requirements prior to spaceflight missions. c) Assure technical excellence. 2. Designation of applicable NASA Centers for HMTA implementation and Chief Medical Officer (CMO) appointment. 3. Center CMO responsible for HMTA implementation for programs and projects at the center. JSC HMTA captured in "JSC HMTA Implementation Plan". 4. Establishes specifics of dissenting opinion process consistent with NASA procedural requirements.

Fogarty, Jennifer A.↗
NASA NTRS2003

Electromagnetic Interactions GenERalized (EIGER): Applications at Johnson Space Center

This slide presentation reviews the software framework for the analysis and design of complex electromagnetic systems. The system called Electromagnetic Interactions GenERalized (EIGER) is a hybrid finite element solution for wave equations and deru=ives boundary element solutions for integral equation formulations. Written in Fortran 90 Eiger uses object-oriented design methods to abstract key analysis components. EIGER has been applied to higher order modeling for analysis of antennas to assist in the design of the antennas of a mini-AERCam. EIGER might also be used to model the Ion Cyclotron Resonant heating stage for the VAriable Specific Impulse Magnetoplasma Rocket (VASIMR).

Dobbins, Justin A.↗
NASA NTRS2010

The History of the Animal Care Program at NASA Johnson Space Center

This slide presentation reviews the work of the Animal Care Program (ACP). Animals have been used early in space exploration to ascertain if it were possible to launch a manned spacecraft. The program is currently involved in many studies that assist in enhancing the scientific knowledge of the effect of space travel. The responsibilities of the ACP are: (1) Organize and supervise animal care operations & activities (research, testing & demonstration). (2) Maintain full accreditation by the International Association for the Assessment and Accreditation of Laboratory Animal Care (AAALAC) (3) Ensure protocol compliance with IACUC recommendations (4) Training astronauts for in-flight animal experiments (5) Maintain accurate & timely records for all animal research testing approved by JSC IACUC (6) Organize IACUC meetings and assist IACUC members (7) Coordinate IACUC review of the Institutional Program for Humane Care and Use of Animals (every 6 mos)

Khan-Mayberry, Noreen↗
NASA NTRS2011

NASA Johnson Space Center: White Sands Test Facility

This slide presentation reviews the testing facilities and laboratories available at the White Sands Test Facility (WSTF). The mission of WSTF is to provide the expertise and infrastructure to test and evaluate spacecraft materials, components and propulsion systems that enable the safe exploration and use of space. There are nine rocket test stands in two major test areas, six altitude test stands, three ambient test stands,

Aggarwal, Pravin↗
NASA NTRS2011

PCB-Caulk Replacement Project Johnson Space Center Houston, TX

Wet method reduced exposure by minimizing overall respirable particulate release. Dry method didn't introduce delays for primer/caulk application. Removed caulks came in many forms, from dry powdery to tarry sticky. Varying textures were not sampled or packaged differently. During the course of the project, EPA modified recommended practices to include full containment for exterior caulk removal. Changes are ongoing. Initial recommendations were directed to school buildings. EPA is researching risks due to caulk. Exposure guidance lacking except for 2 of 209 PCB congeners. Work was safely completed on schedule and under budget.

Young, William M.↗
NASA NTRS2011

[NASA Johnson Space Center Co-Op Student Experience Report]

My primary task on my first tour at JSC was to assist my mentor, Sheikh Ahsan, with a research study he is conducting on aluminum wire. While assisting my mentor with the aluminum wire study, I've also had an opportunity to complete work for other projects including the In-Situ Resource Utilization (ISRU) Project and an Electrolysis Project for Innovation Day at JSC.

Judge, David↗