Search NASA⌕ Search

SEARCH · Search NASA

Results for “L-band”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Urban land use classification using synthetic aperture radar

In the cases of such land uses as the commercial and industrial, the incorporation of microwave data to that available from the visible and near visible regions may increase classification accuracy, provided that the limitations inherent in radar data are taken into consideration. Attention is presently given to several approaches to the use of radar data in land use classification of urban and near urban areas, with emphasis on L-band horizontal transmit and horizontal receive data available from Seasat-A. The Los Angeles, CA metropolitan area provides the geographic focus for this study.

Bryan, M. L.↗

Identification of corn fields using multidate radar data

Airborne C- and L-band radar data acquired over a test site in western kansas were analyzed to determine corn-field identification accuracies obtainable using single-channel, multichannel, and multidate radar data. An automated pattern-recognition procedure was used to classify 144 fields into three categories: corn, pasture land, and bare soil (including wheat stubble and fallow). Corn fields were identified with accuracies ranging from 85 percent for single channel, single-date data to 100 percent for single-channel, multidate data. The effects of radar parameters such as frequency, polarization, and look angle as well as the effects of soil moisture on the classification accuracy are also presented.

Shanmugan, K. S.↗

Landsat-D, about to be reality

The space and ground segments of the Landsat-D thematic mapper (TM) for remote sensing of a 185 km swath with 30 m resolution are described. Scanning the full earth once every 16 days from its 705 km sunsynchronous orbit, Landsat-D will relay its data on the ku-band through the TDRSS satellite to a ground station. The X-band will also be used to transmit data directly to foreign and domestic ground stations; the S-band will be reserved for MSS data only. Landsat-D comprises the multimission modular spacecraft and the instrument module, which features the MSS and TM, a wideband communication subsystem, a solar array, and an L-band global positioning system. Three computers on the ground provide a high degree of automation for reception, storage, retrieval, back-up, and transmission of data and commands. Additionally, a van is equipped with transportable equipment, including an antenna. Procedures followed for image generation from the MSS and TM are detailed, noting storage at Goddard until dispersal of tapes under the direction of the EROS data center.

Aepli, T. C.↗

The effects of vegetation cover on the radar and radiometric sensitivity to soil moisture

The measured effects of vegetation canopies on radar and radiometric sensitivity to soil moisture are compared to emission and scattering models. The models are found to predict accurately the measured emission and backscattering for various crop canopies at frequencies between 1.4 and 5.0 GHz, especially at theta equal to or less than 30 deg. Vegetation loss factors, L(theta), increase with frequency and are found to be dependent upon canopy type and water content. In addition, the radiometric power absorption coefficient of a mature corn canopy is 1.75 times that calculated for the radar. Comparison of an L-band radiometer with a C-band radar shows the two systems to be complementary in terms of accurate soil moisture sensing over the extreme range of naturally occurring soil moisture conditions.

Ulaby, F. T.↗

Radar backscattering properties of corn and soybeans at frequencies of 1.6, 4.75, and 13.3. GHz

The NASA Johnson Space Center made an observational study of the radar-backscattering properties of corn and soybeans in commercial fields in a test site in Webster County, IA. Aircraft-based radar scatterometers measured the backscattering coefficient of the crops at three frequencies, 1.6 GHz (L-band), 4.75 GHz (C-band), and 13.3 GHz (Ku-band), at 10 sensor look-angles (5 to 50 degrees from the nadir in steps of 5 degrees), and with several polarization combinations. Among other findings, it was determined that: (1) row direction differences among fields affected significantly the radar-backscattering coefficient of the fields when the radar system used like-polarization at look-angles from 5 to 25 degrees; (2) row-direction differences had no effect on radar backscattering when the system used either cross-polarization or look-angles greater than 25 degrees regardless of the polarization; (3) wet surface-soil moisture conditions resulted in significantly poorer spectral separability of the two crops as compared to dry-soil conditions; and (4) on the dry-soil date, the best channel for separating corn from soybeans was the C-band cross-polarized measurement at a look-angle of 50 degrees.

Paris, J. F.↗

Internationally supported data acquisition for solar system exploration in the 1990's

Procedures that could be followed for cooperative agreements between countries with large ground station antennas to help provide mission telemetry support for increasing solar system exploration are outlined. It is noted that mission cost reductions, and thereby greater chances that missions will be approved, are offered by the opportunity to make planetary probes multinational efforts. The Canberra station is a suitable site for the Japanese Planet A Halley's comet intercept probe. The French have requested U.S. cooperation in developing VLBI stations in the L-band to receive signals from the Venus balloons and landers being sent as part of a joint French-Soviet mission to Venus and Halley's comet. The construction of the stations would extend the capabilities already present with NASA's deep space network, particularly for tracking the Voyager visits to Uranus and Neptune.

Reid, M. S.↗

Microstrip antennas for SAR applications

Current and future microstrip antenna technology development for Spaceborne Synthetic Aperture Radars (SAR) are summarized. Some of the electrical and mechanical characteristics of previously and presently developed microstrip SAR antennas are shown. The SEASAT, the SIR-A and presently the SIR-B antennas are all designed for operation at L-band with approximately 22 MHz of bandwidth. The antennas have linear polarization with minimum of 20 dB of polarization purity. Both the SEASAT and SIR-A antennas were designed for a fixed pointing angle of 20.5 deg and 47 deg, respectively. However, the SIR-B has the added feature of mechanical beam steering in elevation (range). With the exception of different mechanical characteristics, it is concluded that present spaceborne SAR antennas have only single frequency and single polarization performance. The lack of large spaceborne antennas operating at the higher degree of fabrication tolerance required for a given performance; and larger feed and radiating element losses.

Haddad, H. A.↗

Solid state transmitters for spaceborne radars

The SEASAT-A synthetic aperture radar, the first spaceborne SAR, utilized an all solid state RF signal synthesizer and L-band transmitter to drive a corporately fed flat plate array. The RF signal synthesizer generated a linear FM ""CHIRP'' waveform and provided stable CW reference signals used to upconvert the received signal to a unified S-band downlink channel, and to synchronize satellite control logic. The transmitter generated 1200 watts peak RF power (66 watts average) at a center frequency of 1.275 GHz from 354 watts of DC prime power. Linear FM CHIRP swept symmetrically around the center frequency with a bandwidth of 19.05 MHz and a pulse duration of 33.8 sec. Pulse repetition rate was variable from 1647 to 1944 pps. These transmitter signal parameters combined with the flat plate 34 x 7.5 ft aperture at an orbital altitude of 498 miles and a look angle 20 deg off nadir gave the SAR an 85 foot resolution over a 15.5 mile wide swath.

Turlington, T. R.↗

Radar backscatter modelling

The terrain analysis software package was restructured and documentation was added. A program was written to test Johnson Space Center's four band scatterometer data for spurious signals data. A catalog of terrain roughness statistics and calibrated four frequency multipolarization scatterometer data is being published to support the maintenance of Death Valley as a radar backscatter calibration test site for all future airborne and spacecraft missions. Test pits were dug through sand covered terrains in the Eastern Sahara to define the depth and character of subsurface interfaces responsible for either backscatter or specular response in SIR-A imagery. Blocky sandstone bedrock surfaces at about 1 m depth were responsible for the brightest SIR-A returns. Irregular very dense CaCO3 cemented sand interfaces were responsible for intermediate grey tones. Ancient river valleys had the weakest response. Reexamination of SEASAT l-band imagery of U.S. deserts continues.

Schaber, G. G.↗

Does the scatterometer see wind speed or friction velocity?

Studies of radar backscatter from the sea surface are referred either to the wind speed, U, or friction velocity, u(sub *). Bragg scattering theory suggests that these variations in backscatter are directly related to the height of the capillary-gravity waves modulated by the larger waves in tilt and by straining of the short wave field. The question then arises as to what characteristic of the wind field is most probably correlated with the wave number spectrum of the capillary-gravity waves. The justification for selecting U as the appropriate meteorological parameter to be associated with backscatter from L-band to Ku-band are reviewed. Both theoretical reasons and experimental evidence are used to demonstrate that the dominant parameter is U/C(lambda) where U is the wind speed at a height of about lambda/2 for waves having a phase speed of C(lambda).

Donelan, M. A.↗

Multisensor data analysis and its application to monitoring of cropland, forest, strip mines and cultural targets

Seasat L-band and aircraft X-band dual polarized synthetic aperture (SAR) data of the Western Kentucky Coal Region were examined, preprocessed and combined with Landsat Multispectral Scanner (MSS) data to form a seven-band multisensor data set. Analysis of classified data sets show that the three-band SAR data contain moderate discrimination accuracy for the strip mine class but low accuracy for the residential class. The four-band MSS data contain low classification accuracy for the strip mine and residential classes. The integrated five-band SAR/MSS data show that significant improvement in classification accuracy is obtained for both strip mine and residential classes.

Wu, S. T.↗

The SIR-B radar on the Shuttle

The Shuttle Imaging Radar-B (SIR-B) will be the third in a series of spaceborne SAR experiments which began with the 1978 launch of Seasat and continued with the 1981 launch of Seasat and continued with the 1981 launch of SIR-A. Like Seasat and SIR-A, SIR-B will operate at L-band and be horizontally polarized. However, SIR-B will allow digitally processed imagery to be acquired at selectable look angles between 15 and 60 deg, thereby permitting for the first time quantitative and analytical studies of the geometric variables associated with a radar image. These geometric variables include look angle and look direction which have never been studied with previous fixed parameter radar systems.

Cimino, J. B.↗

The SIR-B science investigations plan: Introduction

The Shuttle Imaging Radar-B (SIR-B) and its capabilities are described. The SIR-B instrument is an upgraded version of SIR-A that has the additional capability of tilting the antenna mechanically to acquire data at incidence angles that vary from 15 to 60 deg. Like SEASAT and SIR-A, SIR-B will be an L-band (23-cm) HH polarized radar. The variable-incidence-angle capability will allow several experiments. A specific area may be imaged with a variety of incidence angles on successive days. These images can then be registered and used to produce curves of backscatter as a function of incidence angle for various terrain types. These curves can be used ultimately to characterize the terrain. Stereoimaging may also be done in the multiple-incidence-angle mode. In addition, large areas may be imaged and mosaicked together with only slight variations in incidence angle with each swath.

Source record↗

Geologic mapping of Indonesian rain forest with analysis of multiple SIR-B incidence angles

The discrimination and mapping capabilities are to be evaluated for shuttle imaging radar-B (SIR-B) images of geologic features in Indonesia that are covered by equatorial rain forest canopy. The SIR-B backscatter from the rain forest at L-band is to be compared to backscatter acquired by the SEASAT scatterometer system at Ku-band ever corresponding areas. The approach for data acquisition, handling, and analysis and the expected results of the investigation are discussed.

Ford, J. P.↗

Use of SIR-B multiincidence-angle imagery to study iceberg detectability and offshore ocean feature extraction

The Shuttle Imaging Radar B (SIR-B) iceberg experiment is described and expected results are outlined. The specific objectives are: (1) to study the L-band satellite SAR detectability of iceberg targets as a function of incidence angle and observed conditions; (2) to compare L-, X-, and C-band aircraft imagery, and to use this data as a basis for an appropriate simulation of satellite imagery and to compare with SIR-B images; and (3) to determine the possibility of comparive available surface or near surface currents with estimates of the range component of surface current derived from the SIR-B data (IOS experiment).

Gray, A. L.↗

Development and evaluation of techniques for using combined microwave and optical image data for vegetation studies

Techniques for using combined image data from the Shuttle Imaging Radar (SIR-B) and the LANDSAT Thematic Mapper (TM) or Multispectral Scanner (MSS) for studies of irrigated crops, and boreal and deciduous forests are developed and evaluated. The effects of the structure and composition of crop canopies and soil surfaces on multiangle L-band HH (Horizontal polarization for transmission and reception) backscattering and on optical reflectance (in TM or MSS bands viewed at the nadir) are investigated. The relative accuracy of digital, calibrated SIR-B image data and LANDSAT TM or MSS image data is evaluated. Textural information extraction-techniques are developed for radar and optical image analysis.

Paris, J. F.↗

German Radar Observation Shuttle Experiment (ROSE)

The success of radar sensors in several different application areas of interest depends on the knowledge of the backscatter of radar waves from the targets of interest, the variance of these interaction mechanisms with respect to changing measurement parameters, and the determination of the influence of he measuring systems on the results. The incidence-angle dependency of the radar cross section of different natural targets is derived. Problems involved by the combination of data gained with different sensors, e.g., MSS-, TM-, SPOTand SAR-images are analyzed. Radar cross-section values gained with ground-based radar spectrometers and spaceborne radar imaging, and non-imaging scatterometers and spaceborne radar images from the same areal target are correlated. The penetration of L-band radar waves into vegetated and nonvegetated surfaces is analyzed.

Sleber, A. J.↗

Analysis of data acquired by synthetic aperture radar and LANDSAT Multispectral Scanner over Kershaw County, South Carolina, during the summer season

Data acquired by synthetic aperture radar (SAR) and LANDSAT multispectral scanner (MSS) were processed and analyzed to derive forest-related resources inventory information. The SAR data were acquired by using the NASA aircraft X-band SAR with linear (HH, VV) and cross (HV, VH) polarizations and the SEASAT L-band SAR. After data processing and data quality examination, the three polarization (HH, HV, and VV) data from the aircraft X-band SAR were used in conjunction with LANDSAT MSS for multisensor data classification. The results of accuracy evaluation for the SAR, MSS and SAR/MSS data using supervised classification show that the SAR-only data set contains low classification accuracy for several land cover classes. However, the SAR/MSS data show that significant improvement in classification accuracy is obtained for all eight land cover classes. These results suggest the usefulness of using combined SAR/MSS data for forest-related cover mapping. The SAR data also detect several small special surface features that are not detectable by MSS data.

Wu, S. T.↗