Search NASA⌕ Search

SEARCH · Search NASA

Results for “LINERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Modeling The Effects of Loading Scenario and Thermal Expansion Coefficient on Potential Failure of Cryo-compressed Hydrogen Vessels

A multiscale thermomechanical model for a simplified Type-3 cryogenic compressed hydrogen (H2) storage vessel is developed in this paper. The model accounts for the temperature-dependent elastic-plastic behavior of the vessel carbon/epoxy composite overwrap and aluminum alloy liner. The homogenized thermo-elastic-plastic behavior for the individual laminas of the vessel layup is obtained by an incremental Eshelby-Mori-Tanka approach associated with a micromechanical failure criterion to predict lamina failure while a standard elastic-plastic constitutive model is used to describe the behavior of a typical aluminum alloy assumed for the liner. The vessel response to external loadings is achieved by a finite element method. Four loading scenarios representing four thermomechanical cycles applied to the vessel are analyzed to evaluate constituent and lamina stresses as well as the associate failure criterion during the cycle according to these scenarios. The model can provide helpful guidance to mitigate thermal stresses by an adequate selection of loading scenario, optimizing the layup and by tailoring thermomechanical properties of the resin matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2025

2D CFD of lean premixed hydrogen–air flame quenching under locomotive engine conditions

Hydrogen (H 2 ) is a promising fuel for reducing emissions in heavy-duty internal combustion engines (ICEs), but its low quenching distance increases the risk of flame propagation into narrow crevice regions, such as piston-liner gaps. This work uses detailed CFD simulations with finite-rate chemistry to investigate premixed H 2 –air flame quenching in a two-dimensional (2D) region consistent with the piston-liner gap of a diesel ICE. Model accuracy was assessed by comparison with experimentally measured quenching distances in an annular stepwise diverging tube (ASDT). A parametric study was conducted to assess the influence of crevice width (0.05–1.18 mm), pressure (50–150 bar), unburned gas temperature (431–573 K), and equivalence ratio ( Φ= 0.3–0.6). Results show that the critical Péclet number for flame survival is no greater than 3.25, consistent with prior literature, even under ultra-lean and high-pressure conditions (Φ ≤ 0.3, > 50 bar). Additionally, flames with Péclet numbers exceeding 6.15 exhibited front wrinkling, suggesting the onset of velocity-driven instabilities and enhanced flame robustness. These findings help define thresholds for flame quenching in confined geometries and support the safe design of H 2 fueled ICEs.

08 HYDROGEN↗
DOE OSTI2021

Internal insulation and corrosion control of molten chloride thermal energy storage tanks

A chloride-based molten-salt system that uses a ternary blend of MgCl 2 /KCl/NaCl is investigated to provide higher-temperature thermal energy storage capability than conventional nitrate salt-based systems. Despite their high thermal stability and operating temperature, molten chlorides present several challenges, including the design of internal liners to prevent the corrosion and thermal stress of alloy tank shells. This work discusses issues and potential solutions related to containment of molten chloride salt, specifically the optimization of the hot face refractory materials for use as internal liners. Furthermore, three down-selected refractory materials were analyzed with respect to permeation of salt through the material as well as chemical stability during high temperature operation. Through the application of X-ray imaging and electron spectroscopy techniques, highly stable secondary surface phases in equilibrium with the molten salt were identified, as well as time-dependent changes in the salt composition itself.

25 ENERGY STORAGE↗
DOE OSTI2023

A complete spectroscopic catalogue of local galaxies in the northern spring sky: Gas properties and nuclear activity in different environments

With the aim of providing the complete demography of galaxies in the local Universe, including their nuclear properties, we present SPRING, a complete census of local galaxies limited to the spring quarter of the northern sky (10h < RA < 16h; 0° < Dec < 65°). The SPRING catalogue is a flux- and volume-limited sample (r < 17.7 mag, cz < 10 000 km s -1 ) of 30 597 galaxies, including the Virgo, Coma, and A1367 clusters. Images and spectra were individually examined to clear the sample from unwanted entries. To inspect possible secular and environmental dependencies of the various nuclear excitation properties (star-forming versus active nuclei), we performed a multi-dimensional analysis by dividing the total sample according to: (i) their position in the (NUV - i) versus M star diagram, (ii) the local galaxy density, (iii) the stellar mass, (iv) the halo mass of the group to which galaxies belong, and (v) the neutral hydrogen content. We present a new calibration of the optical diameter-based H I-deficiency parameter H I def , employing a reference sample of isolated galaxies extracted from SPRING. At intermediate distances between Virgo and Coma, we identify a ring-like structure of galaxies constituted by three large filaments, each with a length of approximately 20h -1 Mpc, mostly composed of blue-cloud galaxies with stellar masses M star ≲ 10 10 M ⊙ . The fraction of H I-deficient galaxies within the filament (~30%) suggests that filaments are a transitioning environment between lower- and higher-overdensity environments in terms of H I content, as we find a clear progression from field galaxies to the filament and cluster galaxies for an increasing H I def parameter. We classify the nuclear spectra according to the four-line Baldwin-Phillips-Terlevich (BPT) and the two-line EWHα versus [NII]/Hα (WHAN) diagnostic diagrams, and investigate the variation in the fraction of active nuclei hosts with stellar mass, as well as their colours and environments. We observe that the fraction of low-ionisation nuclear emitting regions (LINERs) is a steep function of stellar mass, for example, it is consistent with zero up to M star ≲ 10 9.5 M ⊙ and becomes ~40% for M star ≳ 101 0.5 M ⊙ , whereas, for M star ≲ 10 9 - 9.5 M ⊙ , almost the entire spectroscopic sample is constituted of galaxies with star-forming nuclei. We investigate whether the nuclear-excitation fractions depend predominantly on the stellar mass or, conversely, on the galaxy environment. In general, we observe that the mass dependence of the fraction of Seyfert nuclei is not very sensitive to the galaxy environment, whereas the fraction of star-forming nuclei is a steeper function of stellar mass in lower-density environments and in blue-cloud galaxies. We find that the fraction of LINERs depends on galaxy colour and, for M star ≳ 10 9.5 - 10 M ⊙ , increases in galaxies belonging to the green valley.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The staged Z-pinch as a potential fusion energy source

A staged Z-pinch is a fusion concept where a high atomic number liner compresses a fusion fuel (deuterium–deuterium or deuterium–tritium) target. Here, we report new results from Lagrangian, Eulerian, and Arbitrary Lagrangian–Eulerian simulations, which confirm that, with proper treatment of the vacuum region outside from the pinch, fusion energy production >1 MJ can be expected without alpha heating and significantly higher if alpha heating is included. It is shown that shock waves play an important role in preheating the target plasma and in piling up liner mass at the liner/target interface. This results in higher ram pressure just before the pinch stagnation time and ultimately in higher energy density target plasma.

Ruskov, E. (ORCID:0000000336724580)↗
DOE OSTI2022

Neutron time-of-flight detectors (nTOF) used at Sandia’s Z-Machine

Neutron time-of-flight (nTOF) detectors have been used on Sandia National Laboratories’ Z-Machine for inertial confinement fusion and magnetized liner fusion experiments to infer physics parameters including the apparent fuel-ion temperature, neutron yield, the magnetic-radius product (BR), and the liner rho-r. Single-paddle, dual-paddle, and co-axial scintillation nTOF detectors are used in axial lines-of-sight (LOS) and LOS that are 12° from the midplane. Detector fabrication, characterization, and calibration are discussed.

Chandler, G. A. (ORCID:0000000219640927)↗
DOE OSTI2023

Exploring the parameter space of MagLIF implosions using similarity scaling. III. Rise-time scaling

Magnetized liner inertial fusion (MagLIF) is a z-pinch magneto-inertial-fusion concept studied at the Z Pulsed Power Facility of Sandia National Laboratories. Two important metrics characterizing current delivery to a z-pinch load are the peak current and the current-rise time, which is roughly the time interval to reach the peak current. It is known that, when driving a z-pinch load with a longer current-rise time, the performance of the z-pinch decreases. However, a theory to understand and quantify this effect is still lacking. Here, in this paper, we utilize a framework based on similarity scaling to analytically investigate the variations in the performance of MagLIF loads when varying the current-rise time, or equivalently, the implosion timescale. To maintain similarity between the implosions, we provide scaling prescriptions of experimental input parameters defining a MagLIF load and derive the expected scaling laws for stagnation conditions and for various performance metrics. We compare predictions of the theory to 2D numerical simulations using the radiation, magneto-hydrodynamic code hydra. For several metrics, we find acceptable agreement between the theory and simulations. Our results show that the voltage φload near the MagLIF load follows a weak scaling law φload ∝$t_{φ}^{-0.12}$ with respect to the characteristic timescale t φ of the voltage source, instead of the ideal φload ∝$t_{φ}^{-1}$ scaling. This occurs because the imploding height of the MagLIF load must increase to preserve end losses. As a consequence of the longer imploding liners, the required total laser preheat energy and delivered electric energy increase. Overall, this study helps understand the trade-offs of the MagLIF design space when considering future pulsed-power generators with shorter and longer current-rise times.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Reducing Richtmyer–Meshkov instability jet velocity via inverse design

In this work, we detail a novel application of inverse design and advanced manufacturing to rapidly develop and experimentally validate modifications to a shaped charge jet analog. The shaped charge jet analog comprises a copper liner, a high explosive (HE), and a silicone buffer. Here, we apply a genetic algorithm to determine an optimal buffer design that can be placed between the liner and the HE that results in the largest possible change in jet velocity. The use of a genetic algorithm allows for discoveries of unintuitive, complex, yet optimal buffer designs. Experiments using the optimal design verified the effectiveness of the buffer and validated the machine learning approach to hydrodynamic design optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Feasibility and performance of the staged Z-pinch: A one-dimensional study with FLASH and MACH2

Z-pinch platforms constitute a promising pathway to fusion energy research. Here, we present a one-dimensional numerical study of the staged Z-pinch (SZP) concept using the FLASH and MACH2 codes. We discuss the verification of the codes using two analytical benchmarks that include Z-pinch-relevant physics, building confidence on the codes' ability to model such experiments. Then, FLASH is used to simulate two different SZP configurations: a xenon gas-puff liner (SZP1*) and a silver solid liner (SZP2). The SZP2 results are compared against previously published MACH2 results, and a new code-to-code comparison on SZP1* is presented. Using an ideal equation of state and analytical transport coefficients, FLASH yields a fuel convergence ratio (CR) of approximately 39 and a mass-averaged fuel ion temperature slightly below 1 keV for the SZP2 scheme, significantly lower than the full-physics MACH2 prediction. For the new SZP1* configuration, full-physics FLASH simulations furnish large and inherently unstable CRs (>300) but achieve fuel ion temperatures of many kilo-electron volts. While MACH2 also predicts high temperatures, the fuel stagnates at a smaller CR. The integrated code-to-code comparison reveals how magnetic insulation, heat conduction, and radiation transport affect platform performance and the feasibility of the SZP concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Assessing the performance of MagLIF with 3D MHD simulations

The Magnetized Liner Inertial Fusion (MagLIF) experimental platform at Sandia National Laboratories has realized a number of recent improvements in electrical current and laser preheat coupling but fusion yields are below expectations, based on modeling with clean (that is, simulations with no interfacial instabilities and no mix) two-dimensional (2D) magneto-hydrodynamics (MHD) simulations, by a factor of 5 or more. However, magnetized liner implosions are known to produce helical magneto-Rayleigh–Taylor (MRT) modes and complex stagnation structures that cannot be directly modeled in 2D. This paper presents the results of 3D HYDRA MHD simulations, including helical MRT, showing that degradation from these instabilities can readily reproduce experimental yields, but it is difficult to simultaneously match the yield along with inferred fuel temperature, pressure, and burn history (assessed with x-rays), which are larger in the experiments considered here. Additional analysis methods and future experiments are proposed to help address the discrepancies. The 3D simulations also show, without substantive improvements to stability, changing the applied Bz or preheat is unlikely to increase performance of MagLIF to the same degree as clean 2D simulations. Finally, the first 3D HYDRA simulations with the Hall term show the ab initio production of helical MRT and produce a clear change in stagnation morphology compared to pre-seeded simulations without Hall. In spite of the differences, the simulations still produce comparable fusion performance but with longer, lower power, neutron yield history.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A two-dimensional numerical study of the magneto-Rayleigh–Taylor instability with FLASH: Application to the staged Z-pinch concept

Magnetically driven implosions involving a liner collapsing onto a target are inherently vulnerable to the magneto-Rayleigh–Taylor instability (MRTI). Among the various approaches proposed to achieve fusion conditions within the target, the staged Z-pinch (SZP) concept employs a high-Z liner, the advantages of which remain an active area of investigation. Consequently, ongoing design optimization efforts are essential, while critical physical processes such as magnetic field (B-field) diffusion and radiation transport increase the complexity of required simulations. In this study, we utilize the new capabilities of the FLASH code to simulate in 2D, for the first time using this code, staged Z-pinch configurations (designated SZP1 and SZP1*), focusing on their stability. First, a comparison of simulation results with theoretical predictions of MRTI growth provide new insights into the often-overlooked influences of high mesh resolution and initial perturbation seeding on instability dynamics. These findings then lead to a discussion on potential improvements for future SZP experiments. These include the use of an axial B-field stabilization and the optimization of radiation transport processes during the implosion. The results presented herein establish the framework for simulating multi-dimensional Z pinches using the FLASH code and pave the way for the development of innovative experimental configurations leveraging its advanced simulation capabilities.

Adaptive mesh refinement↗
DOE OSTI2021

Reconfiguration of an Electrothermal-Arc Plasma Source for In Situ PMI Studies

An electrothermal-arc plasma source (ET-Arc) has been developed to produce transient plasma heat and particle fluxes similar to those produced by edge localized modes onto divertor plasma-facing components in tokamaks. The ET-Arc utilizes a capacitive discharge to send current through a 4-mm-diameter, 9-cm-long capillary source liner. The liner material is ablated to form a high-velocity plasma jet that impacts the target downstream. With the current discharge circuit configuration, pulse lengths are 1 to 2 ms in duration and deliver heat fluxes of 0.25 to 2.1 GW m-2. The plasma was previously characterized with optical emission spectroscopy (OES) on helium emission lines. The He I line ratios were interpreted with collisional radiative analysis to calculate ne and Te. The electron temperature and electron density ranged from Te = 1 to 5 eV and ne = 1022 to 1028 electrons/m3, respectively.

Lindquist, Elizabeth G.↗
DOE OSTI2022

MASCOT: molecular gas depletion times and metallicity gradients – evidence for feedback in quenching active galaxies

ABSTRACT We present results from the first public data release of the MaNGA-ARO Survey of CO Targets (MASCOT), focusing our study on galaxies whose star formation rates and stellar masses place them below the ridge of the star-forming main sequence. In optically selected type 2 AGN/low-ionization nuclear emission regions (LINERs)/Composites, we find an empirical relation between gas-phase metallicity gradients ∇Z and global molecular gas depletion times $t_{\rm dep} = M_{\rm H_2} /{\rm SFR}$ with ‘more quenched’ systems showing flatter/positive gradients. Our results are based on the O3N2 metallicity diagnostic (applied to star-forming regions within a given galaxy), which was recently suggested to also be robust against emission by diffuse ionized gas (DIG) and LINERs. We conduct a systematic investigation into possible drivers of the observed ∇Z − tdep relation (ouflows, gas accretion, in situ star formation, mergers, and morphology). We find a strong relation between ∇Z or tdep and centralized outflow strength traced by the [O iii] velocity broadening. We also find signatures of suppressed star formation in the outskirts in AGN-like galaxies with long depletion times and an enhancement of metals in the outer regions. We find no evidence of inflows impacting the metallicity gradients, and none of our results are found to be significantly affected by merger activity or morphology. We thus conclude that the observed ∇Z–tdep relation may stem from a combination of metal redistribution via weak feedback, and a connection to in situ star formation via a resolved mass-metallicity–SFR relation.

Astronomy & Astrophysics↗
DOE OSTI2024

Properties of a fading AGN from SDSS-IV MaNGA

ABSTRACT We identify a fading AGN SDSS J220141.64+115124.3 from the internal Product Launch-11 (MPL-11) in Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey. The central region with a projected radius of $\sim$2.4 kpc is characterized as LINER-like line ratios while the outskirts extended to $\sim$15 kpc show Seyfert-like line ratios. The ${\rm{[O {\small III}]}}$$\lambda$5007 luminosity of the Seyfert regions is a factor of 37 (2) higher than the LINER regions without (with) dust attenuation correction, suggesting that the AGN activity decreases at least $\sim$8 $\times$ 10$^3$ yr ($\sim$2.4 kpc/light-speed) ago. We model the emission line spectra in the central region with double Gaussian components (a narrow core and a broad wing) and analyse the properties of each component. The narrow core component mostly co-rotates with the stellar disc, whereas the broad wing component with a median of the velocity dispersion $\sim$300 km s$^{-1}$ is related to a wind outflow. The kinematic position angle (PA) of the ionized gas shows an $\sim 20^{\circ }$ twist from the galaxy centre to 1.5 effective radius. The median of the PA difference between the gas and stellar components is as large as $\sim 50^{\circ }$ within 0.4 effective radius. The tidal feature in DESI image and star–gas misalignment suggest this galaxy is a merger remnant. Combining all these observational results as well as public available X-ray and MIR luminosities, we confirm this is a fading AGN, the merger process kick-started the central engine to quasar phase which ionized gas composed of tidal debris, and now the activity of the central black hole decreases. The discontinuity in ${\rm{[O {\small III}]}}$$\lambda$5007 flux and EQW maps is due to multiple AGN outbursts triggered by merger remnant gas inflows.

Mo, Hao (ORCID:0000000234430768)↗
DOE OSTI2024

Understanding the impact of an applied axial magnetic field on efficient current coupling on the Z machine

Magnetized liner inertial fusion (MagLIF) is an attractive concept for producing thermonuclear fusion reactions. The MagLIF platform involves the operation of Helmholtz coils to apply a 15 Tesla axial magnetic field to the load region, where a cylindrical, fuel-filled metal liner is imploded by a ∼ 2 0 MA current pulse. The fringe field from these coils extends into the transmission line that delivers the current to the target. We investigated the extent to which this applied field disturbs the nominal power flow within that transmission line. A simplified model of the geometry shows that adding the applied magnetic field results in magnetic field lines that connect the cathode to the anode, suggesting electrons may not be magnetically insulated in this region. Particle-in-cell simulations indicated the addition of the applied magnetic field would not significantly impact the current delivery to the load. Velocimetry was used to experimentally assess the current delivery with and without the applied magnetic field. We find no measurable effects of the applied field on current delivery in the configuration investigated in this study. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Foam-lined hohlraum, inertial confinement fusion experiments on the National Ignition Facility

Experiments on the National Ignition Facility (NIF) to study hohlraums lined with a 20-mg/cc 400-μm-thick Ta 2 O 5 aerogel at full scale (hohlraum diameter = 6.72 mm) are reported. Driven with a 1.6-MJ, 450-TW laser pulse, the performance of the foam liner is diagnosed using implosion hot-spot symmetry measurements of the high-density carbon (HDC) capsule and measurement of inner beam propagation through a thin-wall 8-μm Au window in the hohlraum. Results show an improved capsule performance due to laser energy deposition further inside the hohlraum, leading to a modest increase in x-ray drive and reduced preheat due to changes in the x-ray spectrum when the foam liner is included. In addition, the outer cone bubble uniformity is improved, but the predicted improvement in inner beam propagation to improve symmetry control is not realized for this foam thickness and density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Weak collisionless shocks mediated by ion gyroviscosity

Collisionless shocks are ubiquitous in space and astrophysical plasmas, and they are essential dynamical features of these systems. Lacking Coulomb collisions, these shocks are mediated by the anomalous dissipation provided by nonlinear plasma instabilities. By numerically resolving the structure of a steady-state, ion gyroviscous shock, we show that ion gyroviscosity, alone, can produce weak (M≲1.1, where M is the sonic Mach number) shocks in a collisionless, magnetized plasma. We emphasize that this effect does not require an appeal to plasma microturbulence. Moreover, while most collisionless systems may be unsuitable to support purely gyroviscous shocks, we argue that gyro-viscous heating may be an overlooked mechanism, generally; and it may be a key driver within magnetohydrodynamic shocks at large. In conclusion, representative examples include the plasma environments produced on the plasma liner experiment and the magnetized liner inertial fusion platforms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Validation and Parametric Investigations of an Internal Permanent Magnet Motor Using a Lumped Parameter Thermal Model

One of the key challenges for the electric vehicle industry is to develop high-power-density electric motors. Achieving higher power density requires efficient heat removal from inside the motor. In order to improve thermal management, a multiphysics modeling framework that is able to accurately predict the behavior of the motor, while being computationally efficient, is essential. This paper first presents a detailed validation of a lumped parameter thermal network (LPTN) model of an Internal Permanent Magnet synchronous motor within the commercially available MOTOR-CAD modeling environment. The validation is based on temperature comparison with experimental data and with more detailed finite element analysis (FEA). All critical input parameters of the LPTN are considered in detail for each layer of the stator, especially the contact resistances between the impregnation, liner, laminations, and housing. Finally, a sensitivity analysis for each of the critical input parameters is provided. A maximum difference of 4% - for the highest temperature in the slot-winding and the end-winding - was found between the LPTN and the experimental data. Comparing the results from the LPTN and the FEA model, the maximum difference was 2% for the highest temperature in the slot-winding and end-winding. As for the LPTN sensitivity analysis, the thermal parameter with the highest sensitivity was found to be the liner-to-lamination contact resistance.

42 ENGINEERING↗