Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lunar Laboratory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Solar wind-induced secondary ions and their relation to lunar surface composition

Based on previous laboratory experiments simulating solar wind sputtering of lunar surface materials, it appears that solar wind ions sputter secondary ions in sufficient numbers to be measured from low-altitude lunar orbit. Solar wind protons are hundreds of times less efficient than those used in standard secondary ion mass spectrometry; nevertheless secondary ions of Na, Mg, Al, Si, K, Ca, Mn, Ti and Fe were observed sputtered from sample simulants of mare and highland soils. These secondary ion fluxes depend both on concentration in the soil and on probability of ionization; yields of easily ionized elements such as K and Na are relatively much greater than those for the more electronegative elements and compounds. The principal geochemical indicator elements Na, Mg, Al, Si, K, Ca, Ti, Mn and Fe are nevertheless detectable. However, it has not been shown that the observed secondary ions vary strictly one-to-one with their concentrations in the geochemically distinct soil simulants used here. While we have a first order understanding of secondary ion sputtering, it is not clear that the observed ion yields can be linked with great accuracy to the simulant's composition. The simulants were analyzed by electron microprobe to establish their detailed composition. The observed secondary ion fluxes can then be compared with the microprobe results. For example Ti(+) fluxes from the three simulants correspond to the true composition with accuracies of better than 10 percent for the high-Ti basalt, and about 20 percent for the low-Ti simulant. The highlands simulant produced a statistically insignificant Ti(+) count rate. Here we discuss the results of further SIMS experiments using the ASU/Center for Solid State Science facility. With careful isolation and preparation of samples, we avoid the problems of the previous experiments. In particular, we will make use of ground-up sample to mimic the sputtering behavior of regolith, and will avoid charging by placing the soil on a conducting indium substrate. We report the results of a blind test of the SIMS technique using a sample of unknown composition.

Elphic, R. C.↗
NASA NTRS1974

Laboratory simulation of the herringbone pattern associated with lunar secondary crater chains

V-shaped ridge components of the herringbone pattern associated with lunar secondary crater chains have been simulated by simultaneous and nearly simultaneous impact of two projectiles near one another. The impact velocities and angles of the projectiles were similar to those of the fragments that produced secondary craters found at various ranges from large lunar craters. Variables found to affect the included angles of the V-shaped ridges are: relative time of impact of the projectiles, impact angle, relative projectile mass, and azimuth angle of the crater chain relative to the projection of the flight line onto the target surface. The functional relationships between the forms of the ridges and many of these variables are similar to those observed for lunar V-shaped ridges. Comparison of the magnitudes of the ridge angles of both laboratory crater pairs and secondary crater chains of the crater Copernicus implies that material was ejected from Copernicus at angles in excess of 60 deg, measured from the normal, to form many of Copernicus' satellite craters.

Oberbeck, V. R.↗
NASA NTRS2008

Constellation Architecture Team-Lunar: Lunar Habitat Concepts

This paper will describe lunar habitat concepts that were defined as part of the Constellation Architecture Team-Lunar (CxAT-Lunar) in support of the Vision for Space Exploration. There are many challenges to designing lunar habitats such as mission objectives, launch packaging, lander capability, and risks. Surface habitats are required in support of sustaining human life to meet the mission objectives of lunar exploration, operations, and sustainability. Lunar surface operations consist of crew operations, mission operations, EVA operations, science operations, and logistics operations. Habitats are crewed pressurized vessels that include surface mission operations, science laboratories, living support capabilities, EVA support, logistics, and maintenance facilities. The challenge is to deliver, unload, and deploy self-contained habitats and laboratories to the lunar surface. The CxAT-Lunar surface campaign analysis focused on three primary trade sets of analysis. Trade set one (TS1) investigated sustaining a crew of four for six months with full outpost capability and the ability to perform long surface mission excursions using large mobility systems. Two basic habitat concepts of a hard metallic horizontal cylinder and a larger inflatable torus concept were investigated as options in response to the surface exploration architecture campaign analysis. Figure 1 and 2 depicts the notional outpost configurations for this trade set. Trade set two (TS2) investigated a mobile architecture approach with the campaign focused on early exploration using two small pressurized rovers and a mobile logistics support capability. This exploration concept will not be described in this paper. Trade set three (TS3) investigated delivery of a "core' habitation capability in support of an early outpost that would mature into the TS1 full outpost capability. Three core habitat concepts were defined for this campaign analysis. One with a four port core habitat, another with a 2 port core habitat, and the third investigated leveraging commonality of the lander ascent module and airlock pressure vessel hard shell. The paper will describe an overview of the various habitat concepts and their functionality. The Crew Operations area includes basic crew accommodations such as sleeping, eating, hygiene and stowage. The EVA Operations area includes additional EVA capability beyond the suit-port airlock function such as redundant airlock(s), suit maintenance, spares stowage, and suit stowage. The Logistics Operations area includes the enhanced accommodations for 180 days such as closed loop life support systems hardware, consumable stowage, spares stowage, interconnection to the other Hab units, and a common interface mechanism for future growth and mating to a pressurized rover. The Mission & Science Operations area includes enhanced outpost autonomy such as an IVA glove box, life support, and medical operations.

Toups, Larry↗
NASA NTRS2003

Vesta's UV Lightcurve: Hemispheric Variation in Brightness and Spectral Reversal

Spectra of asteroid 4 Vesta obtained in October 1990 with the International Ultraviolet Explorer are reanalyzed and reinterpreted. A large portion of the eastern hemisphere (based on the prime meridian definition of Thomas et al., 1997a) is darker at UV Wavelengths than much of the western hemisphere. The UV lightcurve is in contrast with the visible lightcurve, which shows that the eastern hemisphere is brighter than the western. These IUE spectra of Vesta thus may be evidence for the "spectral reversal." first seen on the Moon by Apollo 17. where the visibly brighter lunar highlands are darker than the maria at far-UV wavelengths. This effect was linked to space weathering when it was noted (Wagner et al., 1987) that the spectral reversal appears in the laboratory spectra of lunar soils but not powdered lunar rocks. We investigate Vesta's UV lightcurve and spectral reversal, and its possible connection with space weathering. The addition to grain coatings of small amounts of submicroscopic iron (SMFe) through vapor deposition causes drastic spectral changes at UV-visible wavelengths (Hapke, 2001). while the longer wavelength spectrum remains largely unaffected. Other laboratory results (e.g., Hiroi and Pieters, 1998) indicate that the UV-visible wavelength range is affected by simulated weathering processes in a manner similar to what is seen on Vesta. It is likely that Vesta has experienced relatively minor amounts of space weathering, as indicated by the spectral reversal, along with the subtle visible-near infrared weathering effects (e.g., Binzel et al., 1997).

Hendrix, Amanda R.↗
NASA NTRS1993

The state of Fe in the lunar regolith and its relationship to the spectral reflectance properties of the moon

Space weathering may have altered the surfaces of airless bodies such as asteroids and the moon, and effectively shock-darkened their surfaces, resulting in much lower reflectance and shallower absorption bands compared to those of simple, comminuted, and powdered rocks produced in the laboratory. Studies of lunar samples from the Apollo missions have led to the suggestion that these reflection properties are inherent to the fine-grained regolith which has recorded a wide variety of shock-metamorphic effects. In particular, the lunar soil (i.e., that part of the regolith with grain sizes below 1 mm) contains native Fe in quantities above those present in the rocks from which the soil was formed. The origin and nature of the native Fe in the soil is addressed, and speculations concerning its effects upon the soil's optical properties are presented. Portions of this discussion draw heavily from earlier papers by our research group.

Taylor, Lawrence A.↗
NASA NTRS1993

First oxygen from lunar basalt

The Carbotek/Shimizu process to produce oxygen from lunar soils has been successfully demonstrated on actual lunar samples in laboratory facilities at Carbotek with Shimizu funding and support. Apollo sample 70035 containing approximately 25 percent ilmenite (FeTiO3) was used in seven separate reactions with hydrogen varying temperature and pressure: FeTiO3 + H2 yields Fe + TiO2 + H2O. The experiments gave extremely encouraging results as all ilmenite was reduced in every experiment. The lunar ilmenite was found to be about twice as reactive as terrestrial ilmenite samples. Analytical techniques of the lunar and terrestrial ilmenite experiments performed by NASA Johnson Space Center include iron Mossbauer spectroscopy (FeMS), optical microscopy, SEM, TEM, and XRD. The Energy and Environmental Research Center at the University of North Dakota performed three SEM techniques (point count method, morphology determination, elemental mapping), XRD, and optical microscopy.

Gibson, M. A.↗
NASA NTRS2005

The Abundance and Isotopic Composition of Hg in Extraterrestrial Materials

During the three year grant period we made excellent progress in our study of the abundances and isotopic compositions of Hg and other volatile trace elements in extraterrestrial materials. At the time the grant started, our collaborating PI, Dante Lauretts, was a postdoctoral research associate working with Peter Buseck at Arizona State University. The work on chondritic Hg was done in collaboration with Dante Lauretta and Peter Buseck and this study was published in Lauretta et a1 (2001a). In July, 2001 Dante Lauretta accepted a position as an Assistant Professor in the Lunar and Planetary Laboratory at the University of Arizona. His funding was transferred and this grant has supported much of his research activities during his first two years at the U of A. Several other papers are in preparation and will be published soon. We presented papers on this topic at Goldschmidt Conferences, the Lunar and Planetary Science Conferences, and the Annual Meetings of the Meteoritical Society. The work done under this grant has spurred several new directions of inquiry, which we are still pursuing. Included in this paper are the studies of bulk abundances and isotopic compositions of metreoritic Mercury, and the development of a thermal analysis ICP-MS technique applied to thermally liable elements.

Blum, J. D.↗
NASA NTRS1993

Lunar impact basins: New data for the nearside northern high latitudes and eastern limb from the second Galileo flyby

During the December 1992 Galileo Earth/Moon encounter the northern half of the nearside, the eastern limb, and parts of the western farside of the Moon were illuminated and in view, a geometry that was complementary to the first lunar encounter in December, 1990, which obtained images of the western limb and eastern farside. The Galileo Solid State Imaging System (SSI) obtained multispectral images for these regions during the second encounter and color ratio composite images were compiled using combinations of band ratios chosen on the basis of telescopic spectra and laboratory spectra of lunar samples. Ratios of images taken at 0.41 and 0.76 micron are sensitive to changes in the slope in the visible portion of the spectrum, and ratios of 0.99 and 0.76 micron relate to the strength of near-infrared absorptions due to iron-rich mafic minerals (0.76/0.99 ratio) such as olivine and pyroxene. Results of the analyses of the compositional diversity of the crust, maria, and Copernican craters are presented elsewhere. Primary objectives for lunar basin analysis for the second encounter include analysis of: the north polar region and the Humboldtianum basin; the characteristics of the Imbrium basin along its northern border and the symmetry of associated deposits; the origin of light plains north of Mare Frigoris and associated with several other basins; the nature and significance of pre-basin substrate; the utilization of the stereo capability to assess subtle basis structure; the identification of previously unrecognized ancient basins; basin deposits and structure for limb and farside basins; and assessment of evidence for proposed ancient basins. These data and results will be applied to addressing general problems of evaluation of the nature and origin of basin deposits, investigation of mode of ejecta emplacement and ejecta mixing, analysis of the origin of light plains deposits, analysis of basin deposit symmetry/asymmetry, investigation of basin depth of excavation and crustal stratigraphy, and assessment of models for basin formation and evolution. Here we discuss some preliminary results concerning lunar impact basins, their deposits, and prebasin substrates, using the same approaches that we employed for the Orientale and South Pole-Aitken basins using the data from the first encounter.

Head, J. W.↗
NASA NTRSDate not supplied

Flammability of Materials on the Moon

Lunar gravity has been found to increase the limits of flammability for some materials compared to Earth gravity, presenting a goldilocks zone of reduced convective heat loss, while generating enough buoyant flow to replenish fresh oxygen into the flame zone. Combined with the elevated oxygen concentrations of planned Space Exploration Atmospheres (Sea), a long duration fire experiment in Lunar gravity is important to help understand and mitigate the increased risk. Flammability of Materials on the Moon (FM2) is a robotic, self-contained, combustion chamber which will be sent to the surface of the Moon on a Commercial Lunar Payload Services (CLPS) lander mission CP-21. The environmental control system can replicate and conduct fire experiments automatically in the expected atmospheres, specifically 21% oxygen at 14.7 psia, and 34% oxygen at 8.2 psia, which are of immediate interest to the Human Lander System (HLS) and Lunar Rover. The laboratory prototype became operational this summer. There are four samples currently planned; two SIBAL fabrics (cotton/fiberglass blend) which will be burned in air and two acrylic rods which will be burned in Normoxic Space Exploration Atmospheres (SEA). One of each fuel will be burned upward and downward. SIBAL fabric has been found to only burn downward in air in lunar gravity (via Lunar gravity centrifuge and parabolic flight) where on Earth’s gravity it extinguishes immediately after ignition.

Jennifer Zayac↗
NASA NTRS1974

Thermal histories and crystal distributions in partly devitrified lunar glasses cooled by radiation

Calculations of the expected crystallization behavior of selected lunar compositions (60095 and 14259) are presented. Knowledge of this behavior combined with measurements of the state of crystallinity in partially devitrified lunar samples permits the determination of the thermal history of the samples. The state of crystallinity of a specimen is described by a statistical crystal distribution function psi. The heat flow problems of a plate of opaque glass quenched on an aluminum block and of a semi-transparent glass sphere cooling by radiation are analyzed. The results are combined with laboratory measurements of the crystal growth velocity and the viscosity, and with theoretical expressions for the nucleation frequency (homogeneous and heterogeneous) to obtain psi. It is found that the calculated psi is much too large in comparison with laboratory experiments on lunar samples. Possible reasons for the discrepancy are discussed, and the most likely cause is that the assumed nucleation barrier is too small. It also appears likely that these materials have relatively few nucleating heterogeneities.

Hopper, R. W.↗
NASA NTRS2004

Acquisition of a High-resolution Inductively Coupled Plasma Mass Spectrometer for Cosmochemical and Geochemical Research

The primary goal of our research in this program is to develop new techniques for the analysis of volatile trace elements in very small samples using inductively coupled plasma mass spectrometry (ICP-MS) in preparation for samples returned by the Stardust mission. The instrument that will serve as the basis of our experiments is the ELEMENT2 high-resolution ICP-MS. We have spent the past year designing the laboratory to house this instrument as well as space to store and prepare samples returned by the Stardust mission. Unfortunately, the location that we had initially selected for the instrument turned out to be insufficient for our needs. This was determined almost eight months into the first year of our funding cycle, after extensive work including the production of engineering drawings. However, during this time the Lunar and Planetary Laboratory was selected to lead Phoenix, the first Mars Scout mission. As a result of this award LPL purchased a new, 50,000 square foot building. We have acquired 1400 square feet of laboratory space in this new facility. Four-hundred square feet will be used for a class-100 clean room. This area is designated for storage and preparation of extraterrestrial materials. The additional 1000 square feet will house the ELEMENT2 ICP-MS and peripheral devices. This is an enormous amount of space for this instrument, but it provides plenty of room for expansion in the future. The ICP-MS and the clean room facilities have been purchased. The instrument has been delivered. The startup time for this instrument is relatively short and we expect to be collecting our first data by mid-summer.

Lauretta, D. S.↗
NASA NTRS1992

Robotic Lunar Rover Technologies and SEI Supporting Technologies at Sandia National Laboratories

Existing robotic rover technologies at Sandia National Laboratories (SNL) can be applied toward the realization of a robotic lunar rover mission in the near term. Recent activities at the SNL-RVR have demonstrated the utility of existing rover technologies for performing remote field geology tasks similar to those envisioned on a robotic lunar rover mission. Specific technologies demonstrated include low-data-rate teleoperation, multivehicle control, remote site and sample inspection, standard bandwidth stereo vision, and autonomous path following based on both internal dead reckoning and an external position location update system. These activities serve to support the use of robotic rovers for an early return to the lunar surface by demonstrating capabilities that are attainable with off-the-shelf technology and existing control techniques. The breadth of technical activities at SNL provides many supporting technology areas for robotic rover development. These range from core competency areas and microsensor fabrication facilities, to actual space qualification of flight components that are designed and fabricated in-house.

Klarer, Paul R.↗
NASA NTRS2013

Properties of the Lunar Interior: Preliminary Results from the GRAIL Mission

The Gravity Recovery and Interior Laboratory (GRAIL) mission [1] has provided lunar gravity with unprecedented accuracy and resolution. GRAIL has produced a high-resolution map of the lunar gravity field [2,3] while also determining tidal response. We present the latest gravity field solution and its preliminary implications for the Moon's interior structure, exploring properties such as the mean density, moment of inertia of the solid Moon, and tidal potential Love number k(sub 2). Lunar structure includes a thin crust, a thick mantle layer, a fluid outer core, and a suspected solid inner core. An accurate Love number mainly improves knowledge of the fluid core and deep mantle. In the future, we will search for evidence of tidal dissipation and a solid inner core using GRAIL data.

moon gravity↗
NASA NTRS2006

X-Ray Detector Research at MSFC for Space Applications

NASA's Vision for Space Exploration has specific goals aimed at exploring the Solar System. This vision, under presidential mandate includes landing humans on the moon before the end of the next decade, paving the way for eventual journeys to Mars and beyond. The first missions to the moon will be in the form of both Orbiters and Landers, with the goal of paving the way for human return. One of the instruments we are currently working on,in collaboration with Brookhaven National Laboratory, is a lunar orbiter fluorescent x-ray spectrometer to finely map the light elements (down to Carbon) on surface of the moon. Funded NASA s Planetary Instrument Definition and Development Program the instrument is based on silicon drift detector arrays read out by custom ASICs. These offer the promise of high spectral resolution, necessary for resolving weak lines against a strong background continuum, and very low power requirements, necessary for large areas (greater than 500 square centimeters) required for future lunar missions. Further, the inherent radiation hardness of these detectors makes them ideal candidates for exploring the Jovian system, where the harsh radiation environment from Jupiter s radiation belts creates unfavorable detector conditions. Looking beyond our solar system, in the hard x-ray regime (20-80keV.), we are studying Cadmium-Zinc-Telluride pixilated detectors as feasible candidates for focal plane detectors of a hard x-ray telescope. This energy region bridges the gap between thermal and non-thermal x-ray emission from astronomical sources, will allow us to better understand supernovae nucleosynthesis (such as through the Ti-44 lines at 68keV and 78keV), Active Galactic Nuclei and other compact objects, more completely. The detectors that we are characterizing are 2mm in thickness and are pixilated with a 16x16 array of 300 micrometer pitch pixels (50micometer gap). These detectors are designed at Rutherford Appleton Laboratory, material is from eV Products, and polymer flip-chip assembly was performed by a commercial vendor. An energy resolution of 2.0% at 60keV (or better) should allow us to sufficiently distinguish lines of interest from background continuum, and the detector spatial resolution should be fine enough to over-sample the focal spot from the x-ray focusing optics by about a factor of two. Full technical details of these developments will be presented.

Gaskin, Jessica↗
NASA NTRS1973

Latitude measures of Jupiter in the 0.89-micron methane band.

Jupiter has been photographed by the Lunar and Planetary Laboratory in the 0.89-micron methane band since October 1968. A photometric evaluation of these photographs has not yet been carried out, but a visual study of this collection and a comparison with the color records has been made. This comparison, together with diameter and latitude measures of the methane records, shows that the albedos and latitudes of most features shown at 0.89 micron vary with time and that there is no simple correlation between the visual color and/or intensity of a feature and its intensity in the methane band. The latitudes of the Red Spot and South Tropical Zone have remained unchanged, while those of the Equatorial Zone, North Tropical Zone, and South Polar Hood have changed.

Minton, R. B.↗
NASA NTRS1973

A real-time computer for monitoring a rapid-scanning Fourier spectrometer

A real-time Fourier computer has been designed and tested as part of the Lunar and Planetary Laboratory's program of airborne infrared astronomy using Fourier spectroscopy. The value and versatility of this device are demonstrated with specific examples of laboratory and in-flight applications.

Michel, G.↗