Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC CORE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Investigations of medium wavelength magnetic anomalies in the eastern Pacific using MAGSAT data

Efforts concerning spherical harmonic modeling of the Earth's magnetic field and the use of such models in removing core produced magnetic fields from magnetic fields of crustal origin are discussed. Results indicate that the terms of a spherical harmonic expansion do not uniquely determine a given wavelength of signal as the terms in a Fourier series do. Addition of terms of higher degree and order to a spherical harmonic expansion tend to fine tune the amplitude of the terms of lower degree and order. As a result, removal of such a model from a regional data set will not remove long wavelengths completely.

Harrison, C. G. A.↗

A lunar core and the moon's magnetic field

The suggestion that the moon's magnetic field is due to adiabatic magnetohydrodynamic convection of a molten core has been made by a number of recent authors. Considerations based on petrology, mass and rotational inertia limit the size of this hypothetical core to a few hundred kilometers at the most. A proposal has been made that this core is either molten iron or iron sulfide. The properties are known of both molten iron and iron-sulfide at lunar core pressures. No way can be found to maintain circulation in a hypothetical lunar core, as circulation is contingent upon a temperature gradient being greater than the adiabatic gradient, or an internal heat source.

Kennedy, G. C.↗

Variable frequency transistor inverters use multiple core transformers

Magnetic-coupled multivibrators containing two or more square-loop cores with multiple windings in a single transformer package, provide indirect frequency control and improved operational characteristics. This multivibrator can be used for power oscillators, nonlinear magnetic circuitry and telemetry circuits.

Source record↗

Flux switching in multipath cores

Flux switching in multipath ferrimagnetic core materials - computational analyses for unloaded core, loaded core, core-diode-transistor binary counter, and loaded three-leg core

SWITCHING CIRCUIT↗

Magnetic field generation in the cores of terrestrial bodies

Efforts to find some scaling law for the dipole moments of planets seem illusory for, although dynamo theory is still in a rudimentary state, once the critical magnetic Reynolds Number is exceeded it appears that the field strength is determined by the energy source, it it is permissible to treat the core as a heat engine. For this reason the lunar magnetic field is of special significance as the paleomagnetic evidence strongly suggests that the surface field was about 1 G 3.9 by diminishing exponentially to about .02 G 3.2 by ago and completely disappearing some time later.

Runcorn, S. K.↗

The magnetic field at the core-mantle boundary

Models of the geomagnetic field are, in general, produced from a least-squares fit of the coefficients in a truncated spherical harmonic expansion to the available data. Downward continuation of such models to the core-mantle boundary (CMB) is an unstable process: the results are found to be critically dependent on the choice of truncation level. Modern techniques allow this fundamental difficulty to be circumvented. The method of stochastic inversion is applied to modeling the geomagnetic field. Prior information is introduced by requiring that the spectrum of spherical harmonic coefficients to fall-off in a particular manner which is consistent with the Ohmic heating in the core having a finite lower bound. This results in models with finite errors in the radial field at the CMB. Curves of zero radial field can then be determined and integrals of the radial field over patches on the CMB bounded by these null-flux curves calculated. With the assumption of negligible magnetic diffusion in the core; frozen-flux hypothesis, these integrals are time-invariant.

Bloxham, J.↗

Contactless Magnetic Slip Ring

A contactless magnetic slip ring is disclosed having a primary coil and a secondary coil. The primary and secondary coils are preferably magnetically coupled together, in a highly reliable efficient manner, by a magnetic layered core. One of the secondary and primary coils is rotatable and the contactless magnetic slip ring provides a substantially constant output.

Kumagai, Hiroyuki↗

The search for the site of the r-process

A number of sites have been suggested for the r-process, including neutronized cores of exploding supernovae, jets of neutronized matter ejected from the collapse of rotating magnetized stellar cores, the helium and carbon zones of stars undergoing supernova explosions, and helium core flashes in low-mass stars. Despite much work and many advances in nuclear physics, the site or sites of the r-process is still unknown. Observations of metal-poor stars in the halo of the Galaxy indicate r-process production early in the history of the Galaxy and provide important constraints on galactic nucleosynthesis. Further observations of metal-poor stars, along with advances in understanding the nuclear properties of neutron-rich nuclei and improved astrophysical models of stars in the late stages of evolution, should help to identify the site of the r-process.

Cowan, John J.↗

Sloshing of the Magnetized Cool Gas in the Cores of Galaxy Clusters

X-ray observations of many clusters of galaxies reveal the presence of edges in surface brightness and temperature, known as "cold fronts". In relaxed clusters with cool cores, these edges have been interpreted as evidence for the "sloshing" of the core gas in the cluster's gravitational potential. The smoothness of these edges has been interpreted as evidence for the stabilizing effect of magnetic fields "draped" around the front surfaces. To check this hypothesis, we perform high-resolution magnetohydrodynamics simulations of magnetized gas sloshing in galaxy clusters initiated by encounters with subclusters. We go beyond previous works on the simulation of cold fronts in a magnetized intracluster medium by simulating their formation in realistic, idealized mergers with high resolution ((Delta)x approx. 2 kpc). Our simulations sample a parameter space of plausible initial magnetic field strengths and field configurations. In the simulations, we observe strong velocity shears associated with the cold fronts amplifying the magnetic field along the cold front surfaces, increasing the magnetic field strength in these layers by up to an order of magnitude, and boosting the magnetic pressure up to near-equipartition with thermal pressure in some cases. In these layers, the magnetic field becomes strong enough to stabilize the cold fronts against Kelvin-Helmholtz instabilities, resulting in sharp, smooth fronts as those seen in observations of real clusters. These magnetic fields also result in strong suppression of mixing of high and low-entropy gas in the cluster, seen in our simulations of mergers in the absence of a magnetic field. As a result, the heating of the core due to sloshing is very modest and is unable to stave off a cooling catastrophe.

ZuHone, J. A.↗

Data use investigation for the magnetic field satellite (MAGSAT) mission: Geomagnetic field forecasting and fluid dynamics of the core

MAGSAT data were used to construct a variety of spherical harmonic models of the main geomagnetic field emanating from Earth's liquid core at poch 1980. These models were used to: (1) accurately determine the radius of Earth's core by a magnetic method, (2) calculate estimates, of the long-term ange of variation of geomagnetic Gauss coefficients; (3) establish a preferred truncation level for current spherical harmonic models of the main geomagnetic field from the core; (4) evaluate a method for taking account of electrical conduction in the mantle when the magnetic field is downward continued to the core-mantle boundary; and (5) establish that upwelling and downwelling of fluid motion at the top of the core is probably detectable, observationally. A fluid dynamics forecast model was not produced because of insufficient data.

Benton, E. R.↗

A combined vector potential-scalar potential method for FE computation of 3D magnetic fields in electrical devices with iron cores

A method of combined use of magnetic vector potential based finite-element (FE) formulations and magnetic scalar potential (MSP) based formulations for computation of three-dimensional magnetostatic fields is introduced. In this method, the curl-component of the magnetic field intensity is computed by a reduced magnetic vector potential. This field intensity forms the basic of a forcing function for a global magnetic scalar potential solution over the entire volume of the region. This method allows one to include iron portions sandwiched in between conductors within partitioned current-carrying subregions. The method is most suited for large-scale global-type 3-D magnetostatic field computations in electrical devices, and in particular rotating electric machinery.

Wang, R.↗

Calculation of Transformer Leakage Inductance by Simplified Flux Path Geometries

Series inductance is a critical energy storage element in isolated power converters. Many have explored methods of estimating the total leakage inductance of transformers as an integrated series inductance without external inductors. However, this poses challenges with medium frequency converters and magnetic ribbon-based cores, e.g., metal amorphous nanocrystalline. The material’s relatively high conductivity allows eddy currents to develop when magnetic flux intersects wide surfaces. These eddy currents result in significant additional losses that increase with increasing power flow. This paper presents a simplified and accurate method of estimating leakage flux while identifying separate leakage flux paths that correlate with the magnetic material surfaces. This enables an understanding the proportion of leakage flux that will contribute to extra losses. The methods presented are applicable to both leakage and fringing (around heterogeneous material interfaces) fluxes. This paper includes detailed FEA studies and 3D flux vector measurements matching the presented analytical models.

transformer↗

Battery system and method for sensing and balancing the charge state of battery cells

A battery system utilizes a plurality of transformers interconnected with the battery cells. The transformers each have at least one transformer core operable for magnetization in at least a first magnetic state with a magnetic flux in a first direction and a second magnetic state with a magnetic flux in a second direction. The transformer cores retain the first magnetic state and the second magnetic state without current flow through said plurality of transformers. Circuitry is utilized for switching a selected transformer core between the first and second magnetic states to sense voltage and/or balance particular cells or particular banks of cells.

Davies, Francis J.↗

High Temperature Superconducting Magnets with Active Control for Attraction Levitation Transport Applications

A research program, involving 3 British universities, directed at quantifying the controllability of High Temperature Superconducting (HTS) magnets for use in attraction levitation transport systems will be described. The work includes measurement of loss mechanisms for iron cored HTS magnets which need to produce a flux density of approx. 1 tesla in the airgap between the magnet poles and a ferromagnetic rail. This flux density needs to be maintained and this is done by introducing small variations of the magnet current using a feedback loop, at frequencies up to 10 Hz to compensate for load changes, track variation etc. The test magnet assemblies constructed so far will be described and the studies and modelling of designs for a practical levitation demonstrator (using commercially obtained HTS tape) will be discussed with particular emphasis on how the field distribution and its components, e.g., the component vector normal to the broad face of the tape, can radically affect design philosophy compared to the classical electrical engineering approach. Although specifically aimed at levitation transport the controllability data obtained have implications for a much wider range of applications.

Jones, Harry↗

Sunspot index infers a small relict magnetic field in the sun's core

Inferences from the asymmetry in time of the solar sunspot number, taken over many cycles, yields evidence for the relict magnetic field in the solar core which Cowling (1945) suggested would not decay, over the solar system's lifetime, given sufficiently high bulk electrical conductivity. Whether such a relict field is present can be ascertained either by searching for the presence of a 22-year line quintet in the Fourier spectrum of the sunspot index or by processing the time sequence in order to highlight an offset. Since the solar cycle is unstable to frequency drifts, the presence of frequency modulation can lead to a spurious relict field signal.

Sonett, C. P.↗