SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Passive attitude control and stability for space vehicles with nonsymmetrical mass distribution, by means of inertial coupling between degrees of freedom
Observations of W stars in the ultraviolet by OAO 2 and at 750 and 1400 MHz with the Green Bank telescopes are discussed. The emphasis is on the Green Bank observations of W stars with symmetric nebulae around them, their interpretation, and comparisons with other data. The implications regarding mass distribution, internal motion, flux density, ejected mass, velocity dispersion, and expanding envelopes are considered in detail.
On-orbit refueling is a key enabling technology that will allow a significant increase in the amount of payload mass delivered beyond low-Earth orbit. Despite the potential benefits, there are numerous concerns regarding the operability and scalability of this critical technology. This paper explores the attitude dynamics of two docked spacecraft performing propellant transfer. A vector-dyadic equation is derived to account for the change over time in the mass distribution and the position of the mass center of the stack and moving mass terms omitted in previous literature. Subsequently, the result is applied to two SpaceX-inspired refueling configurations to assess the relative magnitudes of the various terms in the vector-dyadic equation in comparison to the gravity gradient torque.
The mass distribution of fragments that are ejected at a given velocity for impact craters is modeled to allow extrapolation of laboratory, field, and numerical results to large scale planetary events. The model is semi-empirical in nature and is derived from: (1) numerical calculations of cratering and the resultant mass versus ejection velocity, (2) observed ejecta blanket particle size distributions, (3) an empirical relationship between maximum ejecta fragment size and crater diameter, (4) measurements and theory of maximum ejecta size versus ejecta velocity, and (5) an assumption on the functional form for the distribution of fragments ejected at a given velocity. This model implies that for planetary impacts into competent rock, the distribution of fragments ejected at a given velocity is broad, e.g., 68 percent of the mass of the ejecta at a given velocity contains fragments having a mass less than 0.1 times a mass of the largest fragment moving at that velocity. The broad distribution suggests that in impact processes, additional comminution of ejecta occurs after the upward initial shock has passed in the process of the ejecta velocity vector rotating from an initially downward orientation. This additional comminution produces the broader size distribution in impact ejecta as compared to that obtained in simple brittle failure experiments.
Aircraft spinning problems, noting mass distribution and tail design factors for satisfactory spin recovery characteristics
One of the world s largest scientific data systems, NASA'S Earth Observing System Data and Information System (EOSDIS) has stored over three petabytes of earth science data in a geographically distributed mass storage system. Design for this system began in the early 1990s and included a presentation of the design of the mass storage system at this conference in 1995. Many changes have occurred in the ten years since that presentation, much of it performed while the system was operational. In its first operational year (2000), the EOSDIS system had increased NASA's collection of earth science data holdings eight-fold. Today, EOSDIS collects over 7,000 gigabytes of data per week, almost 60 times more than the Hubble Space Telescope. This load represents major challenges for ingest into the mass storage system, as well as for timely and balanced data distribution out of the mass storage system. This paper discusses the evolution of the EOSDIS focusing primarily on the mass storage system component of the archive. We present the lessons that were learned over the years and some directions that we are taking for the future.
Lunar orbiter and deep space probe gravitational sensor for determining mass distribution of moon and asteroids
Interplanetary dust flux and mass distributions obtained from Mariner IV flight
Earlier studies of spontaneous fission of heavy actinides found that the fission-fragment mass distribution suddenly changes from predominantly asymmetric to symmetric, when the mass number of the fissioning nucleus becomes larger than A c = 257. We have measured for the first time fission-fragment mass and totalkinetic-energy (TKE) distributions of the excited compound nucleus 258 Md∗ (Z = 101), populated in the reaction 4 He + 254 Es, using the rare radioactive target isotope 254 Es with a short half-life, T1/2 = 275.7 d. The fission of 258 Md∗ can be interpreted as involving three fission modes: one mass-asymmetric and two mass-symmetric fission modes, the latter two are manifested by different TKE values. In this assumption, symmetric and asymmetric fission modes have nearly similar yields at the excitation energy of 15.0 MeV. The spectrum of 18.0 MeV can be explained as due to the increase of asymmetric fission mode.
Sub-decadal changes in the Earth's rotation rate, and hence in the length-of-day (LOD), are largely controlled by variations in atmospheric angular momentum. Results from two oceanic general circulation models (OGCMs), forced by observed wind stress and heat flux for the years 1992-1994, show that ocean current and mass distribution changes also induce detectable LOD variations.
We present new constraints on the halo masses and matter density profiles of DESI galaxy groups by cross-correlating samples of luminous red galaxies (LRGs) and bright galaxy survey (BGS) galaxies with the publicly available CMB lensing convergence map from ACT DR6. This provides an independent, lensing-based calibration of halo masses, complementary to methods relying on clustering or dynamics. We derive constraints on the mean halo mass for three DESI-selected samples, finding log(𝑀 halo /(𝑀 ⊙ /ℎ)) ≈ 13.18, 13.03 and 13.02 for the main LRG, extended LRG, and BGS samples, respectively. Using a halo model approach, we also compare the projected galaxy-matter density profiles with previously reported gas profiles inferred from measurements of the kinematic Sunyaev-Zel’dovich (kSZ) effect. This work addresses one of the key uncertainties in interpreting kSZ signals—the unknown host halo mass distribution—by providing an independent and consistent mass calibration. The agreement between the gas and total mass profiles at large aperture suggests that sufficiently far from the group center (2–3 virial radii), we recover all the baryons, offering a resolution to the missing baryon problem. We further study the cumulative gas fractions for all galaxies as well as for the most massive galaxy groups in the sample [log(𝑀 halo /(𝑀 ⊙ /ℎ)) ≈ 13.5], finding values that are physically sensible and in agreement with previous findings using kSZ and x-ray data: compared to the TNG300 simulation, the observed gas fractions are systematically lower at fixed radius by ≳ 4𝜎, providing compelling, independent evidence for stronger baryonic feedback in the real Universe. These findings highlight the power of combining CMB lensing with galaxy surveys to probe the interplay between baryons and dark matter in group-sized halos.
The maximum root-mean-square response of a square clamped plate, subjected to a stationary random excitation, was determined both theoretically and empirically. For the tests, a 40 x 40 x 1/4 aluminum sheet was milled out to provide a thin waffle plate with 9 panels. The plate was acoustically excited, with the frequency range limited between 25 Hz and 500 Hz. The root-mean-square power of the random excitations, 149 decibels, was nearly constant for all natural frequencies of the plate system. Strain gage readings at 14 points were plotted as power spectral densities and root-mean-square displacements. A modal damping ratio matrix was determined from the response curves. Damping ratios were found to be a function of frequency, but not of location on the plate. For comparisons with the theoretical response, the plate was subdivided into 14 modes and anlayzed as a damped, lumped parameter system by use of an approximate normal-mode method. This method gave the best predictions of the power spectral densities for the lower frequencies. That prediction errors increased for the higher frequencies is attributed to improper assumptions for mass distribution and the insufficient number of lumped mass points.
A scanning mirror assembly which is part of a Synchronous Orbit Meteorological Satellite is an example where mission objectives required measurement and control of weight, mass center, principal moments of inertia, and products of inertia. The scanning mirror oscillates within the spin stabilized spacecraft, and both the scanning motor torque and perturbation of spacecraft attitude and spin rate have to be reduced to low levels. A theoretically ideal solution would be to make the mirror inertia constant about all axes in a plane perpendicular to the oscillation axis. A practically attainable compromise is to locate principal axes preferentially and make the difference between two of them acceptably small. Methods for making the necessary mass property measurements and deriving and applying minimum weight ballast correction to achieve the necessary mass distribution are discussed. It is noted that mass property control operations are typically subject to practical constraints such as geometry and functional operation of the system and capability of available measurement facilities and fixtures.
On large scales, the higher order moments of the mass distribution, S(sub J) = bar-zeta(sub J)/bar-zeta(sup J-1)(sub 2), e.g., the skewness S(sub 3) and kurtosis S(sub 4), can be predicted using nonlinear perturbation theory. Comparison of these predictions with moments of the observed galaxy distribution probes the bias between galaxies and mass. Applying this method to models with initially Gaussian fluctuations and power spectra P(k) similar to that of galaxies in the Automatic Plate Measuring (APM) survey, we find that the predicted higher order moments S(sub J)(R) are in good agreement with those directly inferred from the APM survey in the absence of bias. We use this result to place limits on the linear and nonlinear bias parameters. Models in which the extra power observed on large scales (with respect to the standard cold dark matter (CDM) model) is produced by scale-dependent bias match the APM higher order amplitudes only if nonlinear bias (rather than nonlinear gravity) generates the observed higher order moments. When normalized to Cosmic Background Explorer Differential Microwave Radiometer (COBE DMR), these models are siginificantly ruled out by the S(sub 3) observations. The cold plus hot dark matter model normalized to COBE can reproduce the APM higher order correlations if one introduces nonlinear bias terms, while the low-density CDM model with a cosmological constant does not require any bias to fit the large-scale amplitudes.
The solar tidal deformation of Mars, measured by its k2 potential Love number, has been obtained from an analysis of Mars Global Surveyor radio tracking. The observed k2 of 0.153 +/- 0.017 is large enough to rule out a solid iron core and so indicates that at least the outer part of the core is liquid. The inferred core radius is between 1520 and 1840 kilometers and is independent of many interior properties, although partial melt of the mantle is one factor that could reduce core size. Ice-cap mass changes can be deduced from the seasonal variations in air pressure and the odd gravity harmonic J3, given knowledge of cap mass distribution with latitude. The south cap seasonal mass change is about 30 to 40% larger than that of the north cap.
In a standard cometary mass distribution (dN/dM) alpha M(-a), a = 1.5 to 2.0) most of the mass resides in the largest comets. The maximum mass M sub max for which this distribution holds uncertain but there are theoretical and observational indications that M sub max is at least approx. 10(23)g. Chiron, although formally classified as an asteroid, is most likely a giant comet in this mass range. Its present orbit is unstable and it is expected to evolve into a more typical short period comet orbit on a timescale of approx. 10(6) to 10(7)yr. The breakup of a chiron-like comet of mass approx. 10(23)g could in principle produce approx. 10(5) Halley-size comets, or a distribution with an even larger number. If a giant comet was in a typical short period comet orbit, such a breakup could result in a relatively brief comet shower (duration approx. less than 10(6)yr) with some associated terrestrial impacts. However, the most significant climatic effects may not in general be due to the impacts themselves but to the greatly enhanced zodiacal dust cloud in the inner Solar System. (Although this is probably not the case for the unique K-T impact). Researchers used a least Chi square program with error analysis to confirm that the 2 to 5 micrometer excess spectrum of Giclas 29 to 38 can be adequately fitted with either a disk of small inefficient (or efficient) grains or a single temperature black body. Further monitoring of this star may allow discrimination between these two models.
The hard X-ray spectrum of magnetic cataclysmic variables can be modelled to provide a measurement of white dwarf mass. This method is complementary to radial velocity measurements, which depend on the (typically rather uncertain) binary inclination. Here we present results from a Legacy Survey of 19 magnetic cataclysmic variables with NuSTAR.We fit accretion column models to their 20–78 keV spectra and derive the white dwarf masses, finding a weighted average M(sub WD) = 0.77 ± 0.02 M(sub ⨀), with a standard deviation σ = 0.10 M(sub ⨀), when we include the masses derived from previous NuSTAR observations of seven additional magnetic cataclysmic variables. We find that the mass distribution of accreting magnetic white dwarfs is consistent with that of white dwarfs in non-magnetic cataclysmic variables. Both peak at a higher mass than the distributions of isolated white dwarfs and post-common-envelope binaries. We speculate as to why this might be the case, proposing that consequential angular momentum losses may play a role in accreting magnetic white dwarfs and/or that our knowledge of how the white dwarf mass changes over accretion–nova cycles may also be incomplete.
The energy-dependent cross section for e + e − → η ψ ( 2 S ) is measured at 18 center of mass energies from 4.288 to 4.951 GeV using the BESIII detector. Using the same data samples, we also perform the first search for the reaction e + e − → η X ˜ ( 3872 ) , but no evidence is found for the X ˜ ( 3872 ) in the π + π − J / ψ mass distribution. At each of the 18 center of mass energies, upper limits at the 90% confidence level on the cross section for e + e − → η ψ ( 2 S ) and on the product of the e + e − → η X ˜ ( 3872 ) cross section with the branching fraction of X ˜ ( 3872 ) → π + π − J / ψ are reported. Published by the American Physical Society 2024