Search NASA⌕ Search

SEARCH · Search NASA

Results for “METAL FORMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Skylab neutron environment experiment (Science Demonstration SD-34 (TV108)). Description and preliminary results

Neutron and proton induced radioactivity at various locations within Skylab were measured. Samples of five metals were formed into activation packets and deployed at the following locations on the Skylab 4 mission: orbital workshop film vault, water storage tank, and two opposing orbital workshop internal locations. Radioactive nuclides were produced in the packets by nuclear interactions of high-energy protons and secondary neutrons within Skylab. Low-level gamma ray spectroscopy measurements were made on the returned packets to determine the incident neutron and proton fluxes and spectra and their variations with mass distribution.

Fishman, G. J.↗
NASA NTRS1975

Diffused guides for distributed-feedback lasers

Proposed waveguide is hollow cylindrical pipe. Inside channel surface is infused with gas or metal molecules, forming periodic cross sections along entire length. Light is scattered at periodic infusions, resulting in distributed feedback. Configuration is suited for capillary gas lasers.

Elachi, C.↗
NASA NTRS1976

Atomic oxygen-metal surface studies as applied to mass spectrometer measurements of upper planetary atmospheres

The problem of atomic oxygen loss in mass spectrometer ion sources can be reduced to an understanding of the possible surface interactions between oxygen atoms and the metal surface of the ion source. Results are presented for an experimental study in which an atomic oxygen beam apparatus and a mass spectrometer were used to measure the oxygen atom reflection, recombination, general surface reaction, and occlusion probabilities on six different engineering surfaces as a function of atomic oxygen exposure. The materials studied are gold, Nichrome V, aluminum, titanium, silver, and platinum. The variation in measured reflection probability seems to occur with metals that form oxides, Nichrome V being stable in terms of reflection stability. Recombination is observed an all surfaces except aluminum and platinum. Variation in the complete set of measurements in a single experiment is the result of varying surface conditions.

Sjolander, G. W.↗
NASA NTRS1978

Vehicular impact absorption system

An improved vehicular impact absorption system characterized by a plurality of aligned crash cushions of substantially cubic configuration is described. Each consists of a plurality of voided aluminum beverage cans arranged in substantial parallelism within a plurality of superimposed tiers and a covering envelope formed of metal hardware cloth. A plurality of cables is extended through the cushions in substantial parallelism with an axis of alignment for the cushions adapted to be anchored at each of the opposite end thereof.

Knoell, A. C.↗
NASA NTRS1981

Midlatitude sporadic-E layers

Rocket borne probes and incoherent scatter radar were demonstrated to be effective methods of studying the structure of midlatitude sporadic E layers. Layers are formed when metal ions are converged vertically in a wind shear to produce a local enhancement of electron density. Rocket and radar observations show that the layers may occassionally have complex structure produced by an unstable wind shear. The partial transparency to radio waves of sporadic E layers is shown to be due to localized regions of high electron density.

Smith, L. G.↗
NASA NTRS1981

Preparation and evaluation of advanced electrocatalysts for phosphoric acid fuel cells

A number of electrocatalyst combinations were prepared and characterized. These electrocatalysts were formulated to contain platinum combined with transition metal carbide forming elements (W, Mo, V) for cathodes and platinum combined with palladium for anodes. High resolution electron microscopy was used to determine the crystallite size and dispersion of platinum-palladium alloy electrocatalysts in order to provide analytical support for the electrochemical determinations of the particle dispersions. An equation was derived which correlates palladium crystallite size with electrochemical hydrogen adsorption. Based on comparisons of electrocatalyst performances in the presence of pure hydrogen and hydrogen containing carbon monoxide, it was shown that the apparent poisoning of the electrocatalyst by carbon monoxide is influenced by the electrode structure.

Stonehart, P.↗
NASA NTRS1982

Hydrodynamic performance of an annular liquid jet: Production of spherical shells

An annular jet flow of liquid surrounding a flow of gas at its core is extremely unstable. Axisymmetric oscillations arise spontaneously, and grow with such rapidity along the axial dimension that a pinch-off of the liquid and an encapsulation of the core gas occurs within as few as four jet diameters. The shells which result thereby may be described as thick-wall bubbles, for which van der Waals forces are unimportant. A description is given of the fluid dynamic processes by which the shells are formed, and of means for preserving and promoting the geometrical of the product. The forming of metallic shells is mentioned.

Kendall, J. M.↗
NASA NTRS1984

Containerless Solidification of Amorphous Metals

Method produces large amorphous alloys. Spheres of amorphous metal alloys formed and collected after molten samples coated and cooled in drop tube. Coated spheres cooled acoustically and cryogenically. Amorphous specimens 5mm in diameter or larger possible.

Lee, M. C.↗
NASA NTRS1983

Kinetics of copper ion absorption by cross-linked calcium polyacrylate membranes

The absorption of copper ions from aqueous copper acetate solutions by cross-linked calcium acrylate membranes was found to obey parabolic kinetics similar to that found for oxidation of metals that form protective oxide layers. For pure calcium polyacrylate membranes the rate constant was essentially independent of copper acetate concentration and film thickness. For a cross-linked copolymer film of polyvinyl alcohol and calcium polyacrylate, the rate constant was much greater and dependent on the concentration of copper acetate. The proposed mechanism in each case involves the formation of a copper polyacrylate phase on the surface of the membrane. The diffusion of the copper ion through this phase appears to be the rate controlling step for the copolymer film. The diffusion of the calcium ion is apparently the rate controlling step for the calcium polyacrylate. At low pH, the copper polyacrylate phase consists of the normal copper salt; at higher pH, the phase appears to be the basic copper salt.

Philipp, W. H.↗
NASA NTRS1984

Structural efficiency studies of corrugated compression panels with curved caps and beaded webs

Curved cross-sectional elements are employed in structural concepts for minimum-mass compression panels. Corrugated panel concepts with curved caps and beaded webs are optimized by using a nonlinear mathematical programming procedure and a rigorous buckling analysis. These panel geometries are shown to have superior structural efficiencies compared with known concepts published in the literature. Fabrication of these efficient corrugation concepts became possible by advances made in the art of superplastically forming of metals. Results of the mass optimization studies of the concepts are presented as structural efficiency charts for axial compression.

Davis, R. C.↗
NASA NTRS1984

The undercooling of liquids

The formation by melt quenching of such metastable structures as glassy or microcrystalline solids and highly supersaturated solutions is made possible by the extreme resistance of most melts to homophase crystal nucleation at deep undercooling. This nucleation resistance contrasts sharply with the very low kinetic resistance to the movement of crystal-melt interfaces, once formed, in metals and other fluid systems at even minute undercooling. The methods of nucleation study which have proven especially effective in bypassing nucleation by heterophase impurities thereby exposing the high resistance of melts to homophase nucleation may be summarized as follows: observation of the crystallization behavior of dispersed small droplets; drop tube experiments in which liquid drops solidify, under containerless conditions, during their fall in the tube; and observation of the crystallization of bulk specimens immersed in fluxes chosen to dissolve or otherwise deactivate (e.g., by wetting) heterophase nucleants. This method has proven to be remarkably effective in deactivating such nucleants in certain pure metals.

Turnbull, D.↗
NASA NTRS1985

Fabrication of ceramic substrate-reinforced and free forms

Components fabricated of, or coated with, ceramics have lower parasitic cooling requirements. Techniques are discussed for fabricating thin-shell ceramic components and ceramic coatings for applications in rocket or jet engine environments. Thin ceramic shells with complex geometric forms involving convolutions and reentrant surfaces were fabricated by mandrel removal. Mandrel removal was combined with electroplating or plasma spraying and isostatic pressing to form a metal support for the ceramic. Rocket engine thrust chambers coated with 0.08 mm (3 mil) of ZrO2-8Y2O3 had no failures and a tenfold increase in engine life. Some measured mechanical properties of the plasma-sprayed ceramic are presented.

Quentmeyer, R. J.↗
NASA NTRS1985

Structural defects in crystalline silicon

The basic photovoltaic properties of a given crystalline silicon specimen seem to be governed by density and nature of two to three dimensional lattice defects. These are mainly generated by primary growth conditions as grain boundaries of more or less intrinsic character or second phase precipitates from supersaturated solutions of carbon or oxygen. Considerably high values of both solubility and diffusivity in connection with their abundance in common refractory material systems account for the predominance of the two particular elements. Unsaturated dislocations of different types very often can be seen as a consequence of the existence of more dimensional defects as described initially. The final performance of a solar cell is dependent of the concentration and distribution of recombination active centers in the different regions of this device. Typical representatives are fast diffusing transition metals in form of either single atoms or simple complexes. Their avoidance, annihilation, or removal is of great concern in different fields of electronic materials development.

Sirtl, E.↗
NASA NTRS1986

Concepts for interrelating ultrasnic attenuation, microstrucutre and fracture toughness in polycrystalline solids

Conceptual models are advanced for explaining and predicting empirical correlations found between ultrasonic measurements and fracture toughness of polycrystalline solids. The models lead to insights concerning microstructural factors governing fracture processes and associated stress wave interactions. Analysis of the empirical correlations suggested by the models indicate that, in addition to grain size and shape, grain boundary reflections, elastic anisotropy, and dislocation damping are factors that underly both fracture toughness and ultrasonic attenuation. One outcome is that ultrasonic attenuation can predict the size of crack blunting or process zones that develop in the vicinity active cracks in metals. This forms a basis for ultrasonic ranking according to variations in fracture toughness.

Vary, A.↗
NASA NTRS1985

Applications of spherical shells

A new technique of producing hollow spheres of many materials at a very rapid rate, at very low cost, and with high reproducibility of shell diameter and wall thickness has been developed. Shells formed of metal or of other solid materials are expected to find numerous technical and industrial applications. For example, metal shells might be used as inertial confinement fusion targets, or as the principal constituents in lightweight structural materials for NASA Space Stations or DOD large antennas and mirrors, or be employed as containers for phase-change heat-storage media, or serve as containers for hazardous materials, or be employed as catalytic surface agents.

Wang, T. G.↗
NASA NTRS1987

Dual-Energy X-Radiography With Gadolinium Filter

Image resolution increased, and cost reduced. Proposed dual-energy x-ray imaging system, continuous bremsstrahlung spectrum from x-ray tube filtered by foil of nonradioactive gadolinium or another rare-earth metal to form two-peaked energy spectrum. After passing through patient or object under examination, filtered radiation detected by array of energy-discriminating, photon-counting detectors. Detector outputs processed to form x-ray image for each peak and possibly enhanced image based on data taken at both peaks.

Rutt, Brian↗
NASA NTRS1986

Behavior of inversion layers in 3C silicon carbide

A study on the field-induced surface-charge region in 3C silicon carbide (SiC) using 1 MHz capacitance-voltage (C-V) measurements at room temperature is here reported. A double column mercury probe was used on oxidized SiC substrates to form metal-oxide-semiconductor (MOS) structures. These structures were characterized in terms of the substrate doping profile, effective fixed oxide charge, and interface trap density. A distinctive feature of the MOS C-V curves from accumulation to inversion is that after going into deep depletion the capacitance rises to its equilibrium inversion level during the voltage sweep. Capacitance transient measurements indicate that the minority-carrier generation occurs at the SiO2/SiC interface.

Avila, R. E.↗
NASA NTRS1988

Biphase Metal Electrodes For AMTEC

New biphase metal electrodes for alkali metal thermoelectric converter (AMETEC) exhibit low electrical resistance, fast alkali metal transport, and good power densities and lifetime at operating temperatures from 1,100 to 1,160 K. Electrodes expected to last as long as 10,000 h in service without significant degradation. Made of two refractory metals, one forms strong bonds with sodium, other inert to sodium.

Williams, R.↗