Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTISCALE MISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Performance of a Space-Based Wavelet Compressor for Plasma Count Data on the MMS Fast Plasma Investigation

Data compression has been a staple of imaging instruments for years. Recently, plasma measurements have utilized compression with relatively low compression ratios. The Fast Plasma Investigation (FPI) on board the Magnetospheric Multiscale (MMS) mission generates data roughly 100 times faster than previous plasma instruments, requiring a higher compression ratio to fit within the telemetry allocation. This study investigates the performance of a space-based compression standard employing a Discrete Wavelet Transform and a Bit Plane Encoder (DWT/BPE) in compressing FPI plasma count data. Data from the first 6 months of FPI operation are analyzed to explore the error modes evident in the data and how to adapt to them. While approximately half of the Dual Electron Spectrometer (DES) maps had some level of loss, it was found that there is little effect on the plasma moments and that errors present in individual sky maps are typically minor. The majority of Dual Ion Spectrometer burst sky maps compressed in a lossless fashion, with no error introduced during compression. Because of induced compression error, the size limit for DES burst images has been increased for Phase 1B. Additionally, it was found that the floating point compression mode yielded better results when images have significant compression error, leading to floating point mode being used for the fast survey mode of operation for Phase 1B. Despite the suggested tweaks, it was found that wavelet-based compression, and a DWT/BPE algorithm in particular, is highly suitable to data compression for plasma measurement instruments and can be recommended for future missions.

plasma↗
NASA NTRS2017

Spacecraft and Instrument Photoelectrons Measured by the Dual Electron Spectrometers on MMS

Secondary electrons are continuously generated via photoemission from sunlit spacecraft and instrument surfaces. These particles can subsequently contaminate low-energy channels of electron sensors. Spacecraft photoelectrons are measured at energies below that of a positive spacecraft potential and can be removed at the expense of energy resolution. However, fluxes of photoelectrons generated inside electron instruments are independent of spacecraft potential and must be fully characterized in order to correct electron data. Here we present observations of spacecraft and instrument photoelectron populations measured with the Dual Electron Spectrometers (DES) on NASA's Magnetospheric Multiscale (MMS) mission. We leverage observations from Earth's nightside plasma sheet taken during MMS commissioning and develop an empirical model of instrument photoelectrons. This model is used with DES velocity distribution functions to correct plasma moments and has been made publicly available on the MMS science data center for use by the scientific community.

photoelectrons↗
NASA NTRS2018

NASA GNSS Activities: WG-B - Enhancement of GNSS Performance, New Services & Capabilities

NASA represents US civil space users at the United Nations International Committee on Global Navigation Satellite Systems (ICG). ICG Working Group B (WG-B) is responsible for Enhancement of Global Navigation Satellite Systems (GNSS) Performance, New Services and Capabilities. The development and characterization of the GNSS Space Service Volume (SSV) is a key area of activity for NASA within WG-B. This presentation contains NASA's contributions to the June 2018 meeting of the ICG WG-B. Topics covered include recent NASA lunar GPS analysis and results; proposed discussion topics for future SSV workshops and trade studies, an overview of the planned SSV Video, discussion of SSV Outreach, and NASA activities updates including GPS and Galileo Receiver for the International Space Station (GARISS), the International GNSS Service (IGS), Next-Generation Broadcast Services (NGBS), flight results from the Magnetospheric Multiscale (MMS) mission, flight results from the Geostationary Operational Environmental Satellite (GOES) R series, the Automated Flight Termination System (AFTS), and other topics.

NASA↗
NASA NTRS2018

NASA Update: GNSS Space Service Volume Providers' Forum

NASA represents US civil space users at the United Nations International Committee on Global Navigation Satellite Systems (ICG). ICG Working Group B (WG-B) is responsible for Enhancement of GNSS Performance, New Services and Capabilities. The development and characterization of the GNSS Space Service Volume (SSV) is a key area of activity for NASA within WG-B. This presentation contains NASA's contributions to the June 2018 meeting of the ICG WG-B. Topics covered include recent NASA lunar GPS analysis and results; proposed discussion topics for future SSV workshops and trade studies, an overview of the planned SSV Video, discussion of SSV Outreach, and NASA activities updates including GPS and Galileo Receiver for the International Space Station (GARISS), the International GNSS Service (IGS), Next-Generation Broadcast Services (NGBS), flight results from the Magnetospheric Multiscale (MMS) mission, flight results from the Geostationary Operational Environmental Satellite (GOES) R series, the Automated Flight Termination System (AFTS), and other topics.

Global↗
NASA NTRS2018

WG-B - Enhancement of GNSS Performance, New Services & Capabilities

NASA represents US civil space users at the United Nations International Committee on Global Navigation Satellite Systems (ICG). ICG Working Group B (WG-B) is responsible for Enhancement of GNSS Performance, New Services and Capabilities. The development and characterization of the GNSS Space Service Volume (SSV) is a key area of activity for NASA within WG-B. This presentation contains NASA's contributions to the June 2018 meeting of the ICG WG-B. Topics covered include recent NASA lunar GPS analysis and results; proposed discussion topics for future SSV workshops and trade studies, an overview of the planned SSV Video, discussion of SSV Outreach, and NASA activities updates including GPS and Galileo Receiver for the International Space Station (GARISS), the International GNSS Service (IGS), Next-Generation Broadcast Services (NGBS), flight results from the Magnetospheric Multiscale (MMS) mission, flight results from the Geostationary Operational Environmental Satellite (GOES) R series, the Automated Flight Termination System (AFTS), and other topics.

Miller, J. J.↗
NASA NTRS2018

Change of Inertia Tensor Due to a Severed Radial Boom for Spinning Spacecraft

Many spinning spacecraft have long, flexible, radial booms to carry science instrumentation. These radial booms often have low mass but contribute significantly to the spacecraft moment of inertia due to their length. There are historical cases where radial booms have been severed or have failed to deploy. This paper presents models for the center of mass (CM) and inertia tensor that account for variable boom geometry and investigates how the CM and inertia tensor change when a radial boom is severed.The CM and inertia tensor models presented here will be included in the Attitude Ground System (AGS) for the Magnetospheric Multiscale (MMS) mission. This work prepares the AGS to provide uninterrupted support in the event of a radial boom anomaly. These models will improve the AGS computations for spin-axis precession prediction, Kalman filter propagation for the definitive attitude, and mass property generation needed for the onboard control system. As an additional application, a method is developed for approximating the location on the boom where the break occurred based on the new models and readily observable attitude parameters.

Inertia↗
NASA NTRS2014

The FIELDS Instrument Suite on MMS: Scientific Objectives, Measurements, and Data Products

The FIELDS instrumentation suite on the Magnetospheric Multiscale (MMS) mission provides comprehensive measurements of the full vector magnetic and electric fields in the reconnection regions investigated by MMS, including the dayside magnetopause and the night-side magnetotail acceleration regions out to 25 Re. Six sensors on each of the four MMS spacecraft provide overlapping measurements of these fields with sensitive cross-calibrations both before and after launch. The FIELDS magnetic sensors consist of redundant flux-gate magnetometers (AFG and DFG) over the frequency range from DC to 64 Hz, a search coil magnetometer (SCM) providing AC measurements over the full whistler mode spectrum expected to be seen on MMS, and an Electron Drift Instrument (EDI) that calibrates offsets for the magnetometers. The FIELDS three-axis electric field measurements are provided by two sets of biased double-probe sensors (SDP and ADP) operating in a highly symmetric spacecraft environment to reduce significantly electrostatic errors. These sensors are complemented with the EDI electric measurements that are free from all local spacecraft perturbations. Cross-calibrated vector electric field measurements are thus produced from DC to 100 kHz, well beyond the upper hybrid resonance whose frequency provides an accurate determination of the local electron density. Due to its very large geometric factor, EDI also provides very high time resolution (∼1 ms) ambient electron flux measurements at a few selected energies near 1 keV. This paper provides an overview of the FIELDS suite, its science objectives and measurement requirements, and its performance as verified in calibration and cross-calibration procedures that result in anticipated errors less than 0.1 nT in B and 0.5 mV/m in E. Summaries of data products that result from FIELDS are also described, as well as algorithms for cross-calibration. Details of the design and performance characteristics of AFG/DFG, SCM, ADP, SDP, and EDI are provided in five companion papers.

Electromagnetic field measurements↗
NASA NTRS2018

Change of Inertia Tensor Due to a Severed Radial Boom for Spinning Spacecraft

Many spinning spacecraft have long, flexible, radial booms to carry science instrumentation. These radial booms often have low mass but contribute significantly to the spacecraft moment of inertia due to their length. There are historical cases where radial booms have been severed or have failed to deploy. This paper presents models for the center of mass (CM) and inertia tensor that account for variable boom geometry and investigates how the CM and inertia tensor change when a radial boom is severed.The CM and inertia tensor models presented here will be included in the Attitude Ground System (AGS) for the Magnetospheric Multiscale (MMS) mission. This work prepares the AGS to provide uninterrupted support in the event of a radial boom anomaly. These models will improve the AGS computations for spin-axis precession prediction, Kalman filter propagation for the definitive attitude, and mass property generation needed for the onboard control system. As an additional application, a method is developed for approximating the location on the boom where the break occurred based on the new models and readily observable attitude parameters.

Sedlak, Joseph E.↗
NASA NTRS2018

MMS Observations of Electrostatic Waves in an Oblique Shock Crossing

High-resolution particle and wave measurements taken during an oblique bow shock crossing by the Magnetospheric Multiscale (MMS) mission are analyzed. Two regions of differing magnetic behavior are identified within the shock, one with active magnetic fluctuations and one with laminar interplanetary magnetic field topology. A prominent reflected ion population is observed in both regions. The active magnetic region is characterized by large-amplitude (>100 mV/m) electrostatic solitary waves, electron Bernstein waves, and ion acoustic waves, along with intermittent current activity and localized electron heating. In the region of laminar magnetic field, ion acoustic waves are prominently observed. Solar wind ion deceleration is observed in both regions of active and laminar magnetic field. All observations suggest that solar wind deceleration can occur as a result of multiple independent processes, in this case current and ion-ion instabilities.

Goodrich, Katherine A.↗
NASA NTRS2018

Energy Conversion and Partition in the Asymmetric Reconnection Diffusion Region

We investigate the energy conversion and partition in the asymmetric reconnection diffusion region using two-dimensional particle-in-cell simulations and Magnetosphere Multiscale (MMS) mission observations. Under an upstream condition with equal temperatures in the two inflow regions, the simulation analysis indicates that the energy partition between ions and electrons depends on the distance from the X-line. Within the central electron diffusion region (EDR), nearly all dissipated electromagnetic field energies are converted to electrons. From the EDR to the ion diffusion region (IDR) scales, the rate of the electron energy gain decreases to be lower than that of ions. A magnetopause reconnection event inside the IDR observed by MMS shows comparable ion and electron energy gains, consistent with the simulation result in the transition region from EDR to IDR. At the EDR scale, the electron energization is mainly by the reconnection electric field (E(sub r)); in-plane electric fields (E(sub xz)) provide additional positive contributions near the X-line and do negative work on electrons beyond the EDR. The guide field reduces the electron energization by both E(sub r) and E(sub xz) in the EDR. For ion energization, E(sub r) and E(sub xz) have comparable contributions near the time of the peak reconnection rate, while E(sub xz) dominants at later time. At the IDR scale, the guide field causes asymmetry in the amount of the energy gain and energization mechanisms between two exhausts but does not have significant effects on energy partition. Our study advances understanding of ion and electron energization in asymmetric reconnect IDRs.

Wang, Shan↗
NASA NTRS2021

MMS Observations of Energized He+ Pickup Ions at Quasiperpendicular Shocks

Accelerated He+ PUIs, downstream of quasi-perpendicular shocks, are studied as 10a function of the fast mode Mach number (Mf) and shock obliquity (𝜃Bn).We analyze quasi-perpendicular shocks with Mach numbers in the range [1, 7] observed by the Magnetospheric MultiScale (MMS) mission, and compare upstream and downstream He+ velocity distribution functions (VDFs). For each shock event, we characterize the upstream PUI distribution and derive reduced 1D velocity distributions for the selected upstream and downstream intervals. We also compare the upstream to downstream ratio of spectral indices, computed from the He+ perpendicular distributions, to Mf and 𝜃Bn. We find a positive correlation between this spectral index ratio and Mf, which suggests that perpendicular energization of He+ PUIs is enhanced as the shock becomes stronger. These results inform modeling efforts of PUIs and shock acceleration processes, particularly those taking place at the termination shock.

Michael J. Starkey↗
NASA NTRS2021

Lunar Multi-GNSS Receiver

Operational use of GPS has been demonstrated half-way to the moon on the Magnetospheric Multiscale (MMS) mission. Lunar GNSS feasibility has been demonstrated through high fidelity simulations conducted by the Space Communications and Navigation (SCaN) program.

multi GNSS receiver↗
NASA NTRSDate not supplied

Crucial Role of Thermal Gradients in MMS Fluxgate In-Flight Calibration

To meet the science goals of the Magnetospheric Multiscale (MMS) mission, the Fluxgate Magnetometer (FGM) must measure the ambient magnetic field with an accuracy of 0.1 nT. On a typical MMS orbit, the offsets (or zero levels) of the 3-axis FGM can vary by ~0.5 nT (exclusive of periods in Earth shadow). Previous studies have shown that these variations can be characterized as functions of sensor temperature, TS, and can thus be corrected to within 0.2 nT in the spin plane using in-flight calibration techniques (Bromund, et al., 2016, https://ntrs.nasa.gov/citations/20160014711). In that presentation, we noted two significant observations: A distinct function of TS must be used to characterize offsets during shadow: offsets at a given TScan differ by as much as 2 nT in shadow vs sunlight. Offsets change after maneuvers, without a commensurate change in TS . These changes can be as large as 2 nT. We now note a third, related observation: Offsets increase with proximity to the earth even when TS is constant, resulting in variations of ~0.2 nT at 4-5 Earth radii (RE) These effects are evidence that offsets are a multivariate function of TS and another factor, namely: thermal gradients. Due to the spacecraft spin, the Earth and the Sun each provide a relatively constant thermal input onto one instrument face while the opposite face remains in shadow, thus giving rise to thermal gradients. The thermal gradient depend on the orientation of the spin axis relative to the Earth or Sun. We observe that offsets vary by as much as 0.17 nT/degree as a function of the tilt of the spin axis towards the Sun. Thermal input from the Earth is dominated by Outgoing Longwave Radiation (OLR). Due to the proximity to Earth, the inverse proportion of the distance squared is a significant factor in the thermal gradient attributed to Earth OLR. We find that offsets can be corrected to <0.05 nT accuracy near perigee when accounting for these factors using empirically determined constants of proportionality that account for differences in emissivity of the top and bottom faces of the sensor to OLR (as well as other thermal effects). The changes in offset associated with thermal gradient are of the same order of magnitude as effects that were formerly attributed to sensor temperature alone, and thus both parameters are necessary to characterize the FGM offsets.

Kenneth R Bromund↗
NASA NTRSDate not supplied

Addressing the Energy Crisis At Uranus via Magnetic Reconnection

The long-standing 'energy crisis' at Uranus refers to the seemingly anomalous heating of the planet's thermosphere (requires ~200GW) compared to the available input energy from the Sun (~20GW). At Uranus this crisis is further exacerbated by a decades-long thermospheric cooling of H3+ observed from 1980 to present. Input energy from the magnetosphere has been invoked as a possible solution to the energy crisis, though the total available energy and how it may vary with time have not been quantified. We apply a recent scaling of the energy conversion rate of magnetic reconnection developed from recent data from NASA's Magnetospheric Multiscale (MMS) mission to the Uranus system. We find that the energy input is most modulated by solar activity, producing >100GW in solar max and approximately half that during solar minimum. During solar minimum, the remaining energy input required to the Uranus system may be dominated by the Kelvin-Helmholtz instability that is more active for time periods with weaker interplanetary magnetic fields. The declining intensity of solar maxima over the past several decades could account for the observed thermospheric cooling and the ascending phase of the current solar cycle should lead to increases in observed thermospheric H3+ temperatures. Neither process of energy input appears to be significantly impacted by Uranus season or magnetospheric

Daniel Gershman↗
NASA NTRSDate not supplied

NavCube3-mini Lunar GNSS Receiver

This paper describes development and testing of NASA Goddard Space Flight Center’s new NavCube3-mini (NC3m) spaceborne, weak-signal GNSS receiver, which targets all Earth orbit regimes with special focus on lunar applications. NC3m derives from the ground-breaking Magnetospheric Multiscale (MMS) mission Navigator GPS receiver. The MMS-Navigator (launched 2015) holds a Guinness World Record for highest altitude GPS fix and is currently in a highly elliptic orbit with a 29 Earth radii apogee, nearly half lunar distance. NC3m has reduced size, weight, and power compared to the MMS-Navigator, making it suitable for smallsat applications, and adds multi-frequency and multi-GNSS capabilities, among other improvements. A NC3m engineering test unit was subjected to and successfully completed a comprehensive Technology Readiness Level 6 (system/subsystem model or prototype demonstration in a relevant environment) testing campaign in the second half of 2022. This involved high-fidelity simulations in LEO, GEO, and lunar regimes and full environmental testing, including vibration, thermal vacuum, and electromagnetic compatibility. An overview of the NC3m receiver, the test setup, and a sample of results is presented. The results include predicted performance at high-altitude and in the lunar regime.

NavCube3↗
NASA NTRS2012

Multiscale Studies of the Three-Dimensional Dayside X-Line

We review recent experience from the Cluster, Double Star, and THEMIS missions for lessons that apply to the upcoming Magnetospheric Multiscale Mission (MMS) being developed for launch in 2014. On global scales, simulation and statistical studies lead to mean congurations of dayside reconnection, implying specific relative alignments of the inflow magnetic fields and X-line, with implications for MMS operations designed to maximize the number of close encounters with the diffusion region. At intermediate MHD-to-ion scales, reconstruction of features created by one or two X-lines have developed to the point where data from a cluster of spacecraft can determine their temporal trends and the approximate three-dimensional X-line structure. Recent petascale particle-in-cell (PIC) simulations of reconnection encompass three spatial dimensions with excellent resolution, and make striking predictions of electron scale physics that creates complex interacting flux ropes under component reconnection. High time resolution measurements from MMS will determine the detailed electron scale kinetics embedded within the global and MHDion scale contexts. These developments will lead to the refinement of our three-dimensional multiscale picture of reconnection, yielding improved understanding of the global, MHD, and local physics controlling the onset or quenching, variability, and mean rate of reconnection. This in turn will enable improved predictability of the structural features created by transient reconnection, and their space weather consequences.

Reconnection↗
NASA NTRS2010

Analysis of Particulate Contamination During Launch of MMS Mission

NASA's Magnetospheric MultiScale (MMS) is an unmanned constellation of four identical spacecraft designed to investigate magnetic reconnection by obtaining detailed measurements of plasma properties in Earth's magnetopause and magnetotail. Each of the four identical satellites carries a suite of instruments which characterize the ambient ion and electron energy spectrum and composition. Some of these instruments utilize microchannel plates and are sensitive to particulate contamination. In this paper, we analyze the transport of particulates during pre-launch, launch and ascent events, and use the analysis to obtain quantitative predictions of contamination impact on the instruments. Viewfactor calculation is performed by considering the gravitational and aerodynamic forces acting on the particles.

Brieda, Lubos↗
NASA NTRS2017

Global Observations of Magnetospheric High-m Poloidal Waves During the 22 June 2015 Magnetic Storm

We report global observations of high-m poloidal waves during the recovery phase of the 22 June 2015 magnetic storm from a constellation of widely spaced satellites of five missions including Magnetospheric Multiscale (MMS), Van Allen Probes, Time History of Events and Macroscale Interactions during Substorm (THEMIS), Cluster, and Geostationary Operational Environmental Satellites (GOES). The combined observations demonstrate the global spatial extent of storm time poloidal waves. MMS observations confirm high azimuthal wave numbers (m approximately 100). Mode identification indicates the waves are associated with the second harmonic of field line resonances. The wave frequencies exhibit a decreasing trend as L increases, distinguishing them from the single-frequency global poloidal modes normally observed during quiet times. Detailed examination of the instantaneous frequency reveals discrete spatial structures with step-like frequency changes along L. Each discrete L shell has a steady wave frequency and spans about 1 RE, suggesting that there exist a discrete number of drift-bounce resonance regions across L shells during storm times.

Le, G.↗