Search NASA⌕ Search

SEARCH · Search NASA

Results for “Micas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Motor for High Temperature Applications

A high temperature motor has a stator with poles formed by wire windings, and a rotor with magnetic poles on a rotor shaft positioned coaxially within the stator. The stator and rotor are built up from stacks of magnetic-alloy laminations. The stator windings are made of high temperature magnet wire insulated with a vitreous enamel film, and the wire windings are bonded together with ceramic binder. A thin-walled cylinder is positioned coaxially between the rotor and the stator to prevent debris from the stator windings from reaching the rotor. The stator windings are wound on wire spools made of ceramic, thereby avoiding need for mica insulation and epoxy/adhesive. The stator and rotor are encased in a stator housing with rear and front end caps, and rear and front bearings for the rotor shaft are mounted on external sides of the end caps to keep debris from the motor migrating into the bearings' races.

Roopnarine↗
NASA NTRS2015

Petrology and In Situ Trace Element Chemistry of a Suite of R Chondrites

Rumuruti (R) chondrites are characterized by low chondrule/matrix modal ratios, high oxidation state, small mean chondrule size, abundant sulfides and low metal contents, and are of petrologic types 3 to 6 [1, 2]. LAP 04840 (R5, [3]) and MIL 11207 (R6), contain the high-T hydrous phases amphibole and mica [3, 4]; not all equilibrated R chondrites contain these [2]. R chondrites thus can provide evidence on whether there are compositional effects caused by high-T, high-fluid metamorphism of nebular materials. We are investigating a suite of R chondrites of diverse petrologic grades to further understand the nature of the metamorphic processes that engendered them [5]. We report on our petrological studies, plus preliminary in situ analyses of trace elements in amphibole-bearing R chondrites.

Mittlefehldt, D. W.↗
NASA NTRS2015

X-Ray Amorphous Phases in Antarctica Dry Valley Soils: Insight into Aqueous Alteration Processes on Mars?

The Chemistry and Mineralogy (CheMin) instrument onboard the Mars Curiosity rover has detected abundant amounts (approx. 25-30 weight percentage) of X-ray amorphous materials in a windblown deposit (Rocknest) and in a sedimentary mudstone (Cumberland and John Klein) in Gale crater, Mars. On Earth, X-ray amorphous components are common in soils and sediments, but usually not as abundant as detected in Gale crater. One hypothesis for the abundant X-ray amorphous materials on Mars is limited interaction of liquid water with surface materials, kinetically inhibiting maturation to more crystalline phases. The objective of this study was to characterize the chemistry and mineralogy of soils formed in the Antarctica Dry Valleys, one of the driest locations on Earth. Two soils were characterized from different elevations, including a low elevation, coastal, subxerous soil in Taylor Valley and a high elevation, ultraxerous soil in University Valley. A variety of techniques were used to characterize materials from each soil horizon, including Rietveld analysis of X-ray diffraction data. For Taylor Valley soil, the X-ray amorphous component ranged from about 4 weight percentage in the upper horizon to as high as 15 weight percentage in the lowest horizon just above the permafrost layer. Transmission electron microscopy indicated that the presence of short-range ordered (SRO) smectite was the most likely candidate for the X-ray amorphous materials in the Taylor Valley soils. The SRO smectite is likely an aqueous alteration product of mica inherited from granitic materials during glaciation of Taylor Valley. The drier University Valley soils had lower X-ray amorphous contents of about 5 weight percentage in the lowest horizon. The X-ray amorphous materials in University Valley are attributed to nanoparticles of TiO2 and possibly amorphous SiO2. The high abundance of X-ray amorphous materials in Taylor Valley is surprising for one of the driest places on Earth. These materials may have been physically and chemical altered during soil formation, however, the limited interaction with water and low temperatures may result in the formation of "immature" X-ray amorphous or SRO materials. Perhaps, a similar process contributes to the formation of the high content of X-ray amorphous materials detected on Mars.

Ming, D. W.↗
NASA NTRSDate not supplied

Variability in Modelled Airborne Dust Mineralogy Derived from Global Soil Composition Uncertainties

Dust aerosols consist on a variety of minerals with different physic and chemical properties. As such, they interact with short and long wave radiation, potentially form clouds, act as nutrients modulating biogeochemical cycles, or influence atmospheric chemistry, differently. Most current state-of-the-art Earth System Models (ESMs) neglect the complexity in dust composition, mainly due to computational constraints, but also to the existing uncertainties in the size resolved composition of parent soils, the resulting distribution of minerals in airborne dust, and the scarcity of observations to constrain them. Within this work, we assess the variability of global dust composition due to uncertainties in the characterization of the parent soil mineralogy. To that end, we consider two available global soil mineralogy atlases, developed by Claquin et al. (1999) –C1999- and Journet et al. (2014) –J2014-, which represent respectively 8 and 12 relevant minerals for climate (namely: illite, smectite/montmorillonite, kaolinite, calcite, gypsum, hematite, quartz, and feldspars in C1999, and those plus chlorite, vermiculite, goethite, and mica in J2014). Thanks to a recently developed feature of the MONARCH atmospheric-chemistry model, we are able to explicitly resolve the minerals’ atmospheric cycle. Therefore, we define two global experiments to assess changes on airborne dust composition attributed to the soil mineralogy assumptions and provide a measure of their variability. We also perform a preliminary evaluation of the global mineralogy results against available observations of mineral fractions in surface dust concentration. Our results will inform the climate modelling community about the potential variability in dust composition, an aspect that will gain relevance as ESMs continue growing in complexity and new processes to better characterize aerosols’ forcing or biogeochemical cycles are added. Further observational constraints, such as those that will derive from the EMIT NASA mission on soil composition or the FRAGMENT experimental campaigns on airborne dust characterization, will be key in the near future to improve our understanding of the impact of dust mineralogy on fundamental climate features.

Dust aerosols↗
NASA NTRSDate not supplied

Microfluidic Icy-World Chemical Analyzer

Measurements made with the Wet Chemistry Laboratory (WCL), including oxidation-reduction potential (E h ), regolith/soil pH, stable oxidants relevant to chemosynthetic metabolism (e.g., perchlorate, sulfate), and strong electrolytes were key to understanding habitability at the Phoenix Mars landing site. The Microfluidic Icyworld Chemical Analyzer (MICA), the next-generation WCL, is a standalone instrument package that incorporates the same classes of electrochemical sensors as WCL, but in a microfluidic format, enabling habitability assessment in a smaller instrument package (~2.3 kg, ~2 L).

R.C. Quinn↗
NASA NTRSDate not supplied

Feasibility of Micro-Multilayer Multifunctional Electrical Insulation (MMEI) System for High Voltage Applications

The newly patented micro-multilayer multifunctional electrical insulation (MMEI) system was developed for future electric aircraft applications which critically require lightweight but high voltage (HV), high temperature, and corona or partial discharge (PD) resistant insulation. During the initial development stages, the concept and practicability of the MMEI system were successfully validated with its exceptionally high dielectric breakdown voltages. The multilayer structures were optimized in terms of material type, individual layer thickness, and overall layer configuration along with potential mechanisms identified for its superior performance. Subsequently, scalability, manufacturability, and commercial applicability of the MMEI system were demonstrated with the 1 meter long, 3-phase HV, high power (HP) bus bar prototypes. Two prototypes, one with the conventional SOA insulation system including Mica sheet and the other with an optimized MMEI, were designed, fabricated, and tested successfully. Both prototypes passed both HiPot and PD tests up to the highest test voltage available, 15 kVAC, although the latter showed a slight increase in PD activities at 12.5 kV. However, the prototype with MMEI was 15% lighter or 12% thinner than the other one. Current efforts to significantly enhance the PD resistance of the MMEI system by employing semiconductive shielding layers, which can be also multifunctional, e.g., electromagnetic interference shielding, moisture blocking, heat dissipation, for various HV applications are also discussed in this paper.

Novel Electrical Insulation↗
NASA NTRS1950

Preliminary Investigation of Fretting

An experimental investigation, using microscopic observation and color motion photomicrographs of the action, was conducted to determine the cause of fretting. Glass and other noncorrosive materials, as well as metals, were used as specimens. A very simple apparatus vibrated convex surfaces in contact with stationary flat surfaces at frequencies of 120 cycles or less than one cycle per second, an amplitude of 0.001 inch, and a load of 0.2 pound. The observations and analysis led to the conclusions that fretting was initiated by the loosening, due to the inherent adhesive forces, of finely divided and apparently virgin material, and that its initiation is independent of vibratory motion or high sliding speeds. The fretting of platinum, glass, quartz, ruby, and mica relegated the role of oxidation as a cause to that of a secondary factor. Fretting occurred to clean nonmetals and metals readily, and glass microscope slides and steel balls provide excellent method for visual studies. Video run time 9:54, color and sound (mp4). Available for download for best viewing. Document indicated in video is related in the repository and can also be downloaded for use at https://ntrs.nasa.gov/citations/19930083206.

fretting↗
NASA NTRS2023

Daytime Sky Quality at El Leoncito, Argentina

We characterize the daytime sky quality in terms of brightness, cloud coverage, and mainweather variables at the Carlos Ulrico Cesco station of the Felix Aguilar Astronomical Ob-servatory (OAFA), located in El Leoncito National Park, San Juan, Argentina. We have col-lected more than 15 years of daily observations from the auxiliary sky brightness detectorsof the Mirror Coronagraph for Argentina (MICA, in operations from 1997 to 2012), includ-ing daily observing reports. We additionally present data from two meteorological stationsoperated at the site from 2000 to 2020. We determine the main statistical properties andseasonal variability of daytime sky brightness, clear sky time fraction (CSTF), precipitablewater vapor (WV), temperature, humidity, and wind speed, which are relevant for solar,particularly coronal observations.Our results confirm that El Leoncito is an excellent place to perform daytime astro-nomical observations. We measure a median sky brightness of 15.8 ppm, estimated at526.0±1.0 nm and 6 solar radii from the solar disk center; a median CSTF of 0.7; anda median WV below 6 mm. These values, and those of other relevant weather variables, arecomparable to the levels found among the best astronomical observing sites in the world.Due to the extended period of time analyzed and high sampling frequency, the novel dataand results presented in this report contribute to the analysis and interpretation of historicalsky brightness data and are of great value for the future planning of daytime astronomicalinstrumentation at El Leoncito.

F A Iglesias↗
NASA NTRSDate not supplied

Feasibility of Micro-Multilayer Multifunctional Electrical Insulation (MMEI) System for High Voltage Applications

The newly patented micro-multilayer multifunctional electrical insulation (MMEI) system was developed for future electric aircraft applications which critically require lightweight but high voltage (HV), high temperature, and corona or partial discharge (PD) resistant insulation. During the initial development stages, the concept and practicability of the MMEI system were successfully validated with its exceptionally high dielectric breakdown voltages. The multilayer structures were optimized in terms of material type, individual layer thickness, and overall layer configuration along with potential mechanisms identified for its superior performance. Subsequently, scalability, manufacturability, and commercial applicability of the MMEI system were demonstrated with the 1 meter long, 3-phase HV, high power (HP) bus bar prototypes. Two prototypes, one with the conventional SOA insulation system including Mica sheet and the other with an optimized MMEI, were designed, fabricated, and tested successfully. Both prototypes passed both HiPot and PD tests up to the highest test voltage available, 15 kVAC, although the latter showed a slight increase in PD activities at 12.5 kV. However, the prototype with MMEI was 15% lighter or 12% thinner than the other one. Current efforts to significantly enhance the PD resistance of the MMEI system by employing semiconductive shielding layers, which can be also multifunctional, e.g., electromagnetic interference shielding, moisture blocking, heat dissipation, for various HV applications are also discussed in this paper.

Novel Electrical Insulation↗
DOE OSTI2020

Dynamic clay microstructures emerge via ion complexation waves

Clays control carbon, water and nutrient transport in the lithosphere, promote cloud formation5 and lubricate fault slip through interactions among hydrated mineral interfaces. Clay mineral properties are difficult to model because their structures are disordered, curved and dynamic. Consequently, interactions at the clay mineral-aqueous interface have been approximated using electric double layer models based on single crystals of mica and atomistic simulations. We discover that waves of complexation dipoles at dynamically curving interfaces create an emergent long-range force that drives exfoliation and restacking over time- and length-scales that are not captured in existing models. Curvature delocalizes electrostatic interactions in ways that fundamentally differ from planar surfaces, altering the ratio of ions bound to the convex and concave sides of a layer. Multiple-scattering reconstruction of low-dose energy-filtered cryo electron tomography enabled direct imaging of ion complexes and electrolyte distributions at hydrated and curved mineral interfaces with {\aa}ngstrom resolution over micron length scales. Layers exfoliate and restack abruptly and repeatedly over timescales that depend strongly on the counterion identity, demonstrating that the strong coupling between elastic, electrostatic and hydration forces in clays promote collective reorganization previously thought to be a feature only of active matter.

Whittaker, Michael L↗
DOE OSTI2022

Experimental and Computational Heat Transfer Study of sCO2 Single Jet Impingement

The present study experimentally investigates the heat transfer capability of supercritical carbon dioxide (sCO2) single-jet impingement. The evaluated jet Reynolds number range is between 80,000 and 1,000,000, with a non-dimensional jet-to-target surface spacing of 2.8. CO2- impinging jet stagnation conditions were maintained at approximately 20 MPa and a temperature of 673 K for most experiments. The goal is to understand how changes in the aforementioned parameters influence heat transfer between the working fluid and the heated surface. Additionally, due to the elevated Reynolds numbers and difference in thermodynamic properties between air and CO2, air-derived impingement correlations may not be appropriate for CO2 impingement; these correlations will be evaluated against experimental sCO2 impingement data. At the time of this study, no sCO2 impingement data was available relevant to sCO2 power cycles. The target surface is a 1.5-inch diameter copper block centered on the 3mm jet orifice. A mica heating element bolted to the bottom of the copper block provides a uniform heat flux. Thermocouples embedded in the copper block are used to determine the surface temperature. Nusselt numbers obtained from experimental sCO2 data are compared to area-averaged Nusselt numbers from air-derived correlations. The comparisons showed that air correlations drastically underpredict the heat transfer when sCO2 is used as the working fluid. A modified sCO2 correlation using experimental data at discussed conditions is derived based on an existing air correlation.

Richardson, John↗
DOE OSTI2023

Chemical structure–property relationships in nanocelluloses

Abstract Nanocelluloses, nanoscale cellulosic particles or fibrils, are an appealing class of nanomaterials with enormous potential for sustainable development. They have great promise to target some of the 17 Sustainable Development Goals outlined by the United Nations. Nanocelluloses are derived from the most abundant biopolymer in the world, cellulose, which have multiple hydroxyl groups on their surface, enabling a vast range of chemical modifications. The interplay between the chemical structure and physicochemical properties of nanocelluloses is crucial to engineering the next generation of green, functional nanomaterials. In this review paper, we provide a comprehensive account of the structure–property relationships in nanocelluloses, which may establish the basis for the design of precision bio‐based materials. Chemical modifications of nanocelluloses, including hydrolysis, oxidation, esterification, amidation, and polymer grafting, provide an array of chemical and physical properties that open opportunities in a diverse spectrum of applications. We review how chemical modifications affect the physicochemical properties of nanocelluloses, such as thermal stability, hydrophobicity, and dispersibility in nonpolar media. Understanding nanocellulose chemical structure–property relationships is integral to the development of sustainable material platforms based on the most renewable biopolymer on earth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Relaxation dynamics of water in the vicinity of cellulose nanocrystals

Water molecules near cellulose nanocrystals (CNCs; produced via the sulfuric acid-catalyzed hydrolysis of wood pulp) are believed to relax slower than those in the bulk liquid, which may result in unique properties of CNC aqueous dispersions. Herein this study analyzed the polarization behavior of water molecules in CNC aqueous dispersions and other reference samples using a dielectric relaxation spectroscopy (DRS) technique in the microwave frequency range (0.2–20 GHz). As the CNC concentration increases, two slow relaxation components become prominent. The comparison with DRS data of aqueous dispersions of nanoporous silica, polyvinyl alcohol (PVA), and hairy CNC (HCNC) with amorphous chains protruding from both ends suggested that these slow relaxation modes of water near CNC surfaces cannot be attributed to direct hydrogen bonding interactions with the hydroxyl (OH) groups exposed and immobilized at the solid surface. Instead, they are similar to the water molecules interacting with OH groups attached to flexible polymer chains. Molecular dynamics (MD) simulations of the polarization behavior of water near the (110) facet of cellulose Iβ crystals confirmed that the interactions of water molecules with the cellulose crystal surface do not cause slower relaxations in the frequency range studied via the DRS. These results indicated that the CNC surface cannot be depicted with the crystallographic facets of cellulose Iβ; instead, it resembles a polymer-brush surface on which the short glucan residues or fragments of the strong acid-catalyzed hydrolysis process are swollen and extended into the aqueous phase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Ion correlations drive charge overscreening and heterogeneous nucleation at solid–aqueous electrolyte interfaces

Significance Ion distributions at charged solid–water interfaces, referred to as the electrical double layer (EDL), are poorly understood at high ion concentrations, in part due to the lack of molecular-scale descriptions of the interactions between adsorbed hydrated ions. Here, direct visualization of the salinity-dependent evolution of EDL structure reveals molecular origins of nonclassical transformation of the EDL, in which charge overscreening and heterogeneous nucleation are driven by ion–ion correlations at the interfaces. This manifestation of the atomistic basis of nonclassical behaviors provides a much-needed understanding of the impact of ion cooperativity at charged interfaces for the development of predictive models for element transport in natural environments and advanced technologies for material growth and synthesis in saline environments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Suisun Summit 2022: Emerging Themes and Open Questions in qEEG and Neurotherapies

The Suisun Summit 2022 was a gathering of 70 clinicians, educators, and researchers in quantitative electroencephalography and neurofeedback. During this 5-day event, several themes emerged in talks or discussion groups: EEG/qEEG Reading Skills; Medication Effects and Pharmaco-EEG; Technological Advancements; Emerging Concerns; and Growing Community Prestige through Research. Participants were asked to summarize what they believed to be the most important messages from the event to share with colleagues who were not in attendance, resulting in this review. A unifying concept for all the themes was a desire for higher quality, standardized EEG/qEEG education that provides depth as well as breadth. Models of clinical care that encourage open communication with prescribers and functional medicine specialists were strongly emphasized. Abstracts from all presentations are attached in Addendum B.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Factors that influence the activity of biomass-degrading enzymes in the presence of ionic liquids—a review

Ionic liquids (ILs) are seen as a more sustainable alternative to volatile organic solvents that are accelerating innovations in many industries such as energy storage, separations, and bioprocessing. The ability to effectively deconstruct lignocellulosic biomass is a significant hurdle in the biorefining/bioprocessing industry and presents limitations towards the commercial production of bioproducts (such as biofuels, biomaterials, etc. ). Certain ILs have been shown to promote effective lignin removal, cellulose recovery, and sugar yields from various biomass feedstocks such as corn stover, wheat straw, sugarcane bagasse, sorghum, switchgrass, miscanthus, poplar, pine, eucalyptus, and certain mixtures of municipal solid waste. However, these improvements are often counteracted by the limited biocompatibility of ILs, which results in an IL-induced reduction in enzyme activity and stability—an important downstream step in the conversion of biomass to biofuels/bioproducts. As a result, significant efforts have been made to discover and engineer compatible enzyme-IL systems and to improve our understanding on the effect that these ILs have on these systems. This review seeks to examine the impact of ionic liquids on enzymes involved in lignocellulosic biomass deconstruction, with a specific focus on their relevance in the context of pretreatment. Beyond presenting an overview of the ionic liquid pretreatment landscape, we outline the main factors that influence enzyme activity and stability in the presence of ILs This data is consolidated and analyzed to apply this body of knowledge towards new innovations that could lead to improvements in the processing of biomass to biofuels and bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗