Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model serving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Development, implementation, and test results on integrated optics switching matrix

A small integrated optics switching matrix, which was developed, implemented, and tested, indicates high performance. The matrix serves as a model for the design of larger switching matrices. The larger integrated optics switching matrix should form the integral part of a switching center with high data rate throughput of up to 300 megabits per second. The switching matrix technique can accomplish the design goals of low crosstalk and low distortion. About 50 illustrations help explain and depict the many phases of the integrated optics switching matrix. Many equations used to explain and calculate the experimental data are also included.

Rutz, E.↗
NASA NTRS1982

I-Xe ages of individual Bjurbole chondrules

Initial iodine isotopic compositions have been obtained for 10 individual chondrules from the meteorite Bjurbole, with a total range in well determined values of 6.5%, which would correspond to an age difference of 1.6 m.y. These results can be interpreted as distinct formation ages, metamorphic ages, or isotopic inhomogeneities in the early solar system, and can serve to constrain models for chondrule formation. Two of the chondrules show evidence of either isotopic inhomogeneities or disturbances of their I-Xe systems.

Caffee, M. W.↗
NASA NTRS1983

Formulation and solution of rotary-wing aeroelastic stability and response problems

The state of the art in the formulation and solution of rotary-wing aeroelastic stability and response problems is reviewed in detail. The approximations used in the structural, inertia and aerodynamic operators are discussed. The important role of geometric nonlinearities, due to moderate deflections, and aerodynamic stall in the aeroelastic stability and response problem are identified. It is also shown that geometric nonlinearities are of primary importance in aeroelastic stability calculations, and have a more limited, though important, role in response calculations. Next, formulation of coupled rotor/fuselage problems is described, for both air and ground resonance type problems. Both topics, the isolated blade problem and the coupled rotor/fuselage problem, are treated for both hover and forward flight. Solution of aeroelastic stability and response problems proceeds in two stages. First, the spatial dependence is eliminated by using Galerkin's method, or by using the finite element method. Next the nonlinear, or linear, ordinary differential equation with periodic coefficients have to be solved for stability or response. Efficient numerical methods for accomplishing these objectives are presented in a comprehensive manner. The paper contains a number of illustrative numerical results which are intended to clarify various aspects of the modeling process and serve as representative results for both aeroelastic stability and response calculations for a variety of blade and rotor configurations.

Friedmann, P. P.↗
NASA NTRS1984

On accuracy conditions for the numerical computation of waves

The Helmholtz equation (Delta + K(2)n(2))u = f with a variable index of refraction n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. Such problems can be solved numerically by first truncating the given unbounded domain and imposing a suitable outgoing radiation condition on an artificial boundary and then solving the resulting problem on the bounded domain by direct discretization (for example, using a finite element method). In practical applications, the mesh size h and the wave number K, are not independent but are constrained by the accuracy of the desired computation. It will be shown that the number of points per wavelength, measured by (Kh)(-1), is not sufficient to determine the accuracy of a given discretization. For example, the quantity K(3)h(2) is shown to determine the accuracy in the L(2) norm for a second-order discretization method applied to several propagation models.

Bayliss, A.↗
NASA NTRS1984

Applications of the AVE-Sesame data sets to mesoscale studies

Data collected by the lightning data concentrator are available for research. The Mark 3 McIDAS capability provides greater flexibility for the Marshall user community and serves as a model of future UW McIDAS to remote computer links. Techniques were investigated for the display of dynamic 3-D data sets. To date the most promising display technology is a polarized two CRT perspective display which allows both dynamic 3-D images and graphics presentations with full color capability. Algorithms were for the preparation and display of conventional and satellite based weather data in 3-D. These include gridding, contouring, and streamlining processors which operate on both real time and case study data bases. An upper air trajectory model was implemented which creates a display of air parcel trajectories in perspective 3-D. A subsystem for the generation of 3-D solid surface display with shading and hidden surface display with shading and hidden surface removal was tested and its products are currently being evaluated. Motion parallax introduced by moving the point of observation during display is an important depth cue, which, when added to the perspective parallax creates a very realistic appearing display.

Suomi, V. E.↗
NASA NTRS1984

The numerical solution of the Helmholtz equation for wave propagation problems in underwater acoustics

The Helmholtz Equation (-delta-K(2)n(2))u=0 with a variable index of refraction, n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. A numerical algorithm was developed and a computer code implemented that can effectively solve this equation in the intermediate frequency range. The equation is discretized using the finite element method, thus allowing for the modeling of complicated geometrices (including interfaces) and complicated boundary conditions. A global radiation boundary condition is imposed at the far field boundary that is exact for an arbitrary number of propagating modes. The resulting large, non-selfadjoint system of linear equations with indefinite symmetric part is solved using the preconditioned conjugate gradient method applied to the normal equations. A new preconditioner is developed based on the multigrid method. This preconditioner is vectorizable and is extremely effective over a wide range of frequencies provided the number of grid levels is reduced for large frequencies. A heuristic argument is given that indicates the superior convergence properties of this preconditioner.

Bayliss, A.↗
NASA NTRS1984

Development of a support software system for real-time HAL/S applications

Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

Smith, R. S.↗
NASA NTRS1985

Measurement of High Temperature Thermophysical Properties

Technique development and the application of electromagnetic levitation to thermophysical property measurement, including determining heats of fusion, heat capacities, and enthalpy increment functions for extremely refractory materials are discussed. Tungsten properties and the development of an apparatus employing electromagnetic levitation and electron beam heating capable of melting levitating tungsten high temperature heat content measurements by drop calorimetry are emphasized. The development of a prototype microcomputer data acquisition system suitable for controlling the ground based system, with consequent improvement in system handling, which can serve as a model for the system needed for flight experiments is described, which include the development of techniques for imaging pyrometry at temperatures above 3500 K, a semiautomatic calorimeter system capable of handling liquid tungsten, and development of a two color imaging pyrometer system.

Bonnell, D. W.↗
NASA NTRS1986

Remote access for NAS: Supercomputing in a university environment

The experiment was designed to assist the Numerical Aerodynamic Simulation (NAS) Project Office in the testing and evaluation of long haul communications for remote users. The objectives of this work were to: (1) use foreign workstations to remotely access the NAS system; (2) provide NAS with a link to a large university-based computing facility which can serve as a model for a regional node of the Long-Haul Communications Subsystem (LHCS); and (3) provide a tail circuit to the University of Colorado a Boulder thereby simulating the complete communications path from NAS through a regional node to an end-user.

Johnson, G.↗
NASA NTRS1985

On accuracy conditions for the numerical computation of waves

The Helmholtz equation (Delta + K(2)n(2))u = f with a variable index of refraction n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. Such problems can be solved numerically by first truncating the given unbounded domain and imposing a suitable outgoing radiation condition on an artificial boundary and then solving the resulting problem on the bounded domain by direct discretization (for example, using a finite element method). In practical applications, the mesh size h and the wave number K, are not independent but are constrained by the accuracy of the desired computation. It will be shown that the number of points per wavelength, measured by (Kh)(-1), is not sufficient to determine the accuracy of a given discretization. For example, the quantity K(3)h(2) is shown to determine the accuracy in the L(2) norm for a second-order discretization method applied to several propagation models.

Bayliss, A.↗
NASA NTRS1986

Instrument characterization for the detection of long-term changes in stratospheric ozone - An analysis of the SBUV/2 radiometer

The scientific objective of unambiguously detecting subtle global trends in upper stratospheric ozone requires that one maintains a thorough understanding of the satellite-based remote sensors intended for this task. The instrument now in use for long term ozone monitoring is the SBUV/2 being flown on NOAA operational satellites. A critical activity in the data interpretation involves separating small changes in measurement sensitivity from true atmospheric variability. By defining the specific issues that must be addressed and presenting results derived early in the mission of the first SBUV/2 flight model, this work serves as a guide to the instrument investigations that are essential in the attempt to detect long-term changes in the ozone layer.

Frederick, J. E.↗
NASA NTRS1988

Venus mesosphere and thermosphere. III - Three-dimensional general circulation with coupled dynamics and composition

The three-dimensional structure and circulation of Venus' upper mesosphere and thermosphere is examined by means of a modification of NCAR's earth thermosphere general circulation model, using the parameterizations from an earlier two-dimensional Venus model that included eddy diffusion and wave drag. Many of the observed Venus thermosphere features are found to be reproduced by the model, which thereby serves as a benchmark on which to incorporate additional minor constituents and test new self-consistent parameterizations for wave drag and superrotation.

Bougher, S. W.↗
NASA NTRS1988

Structure of wind-shear turbulence

The statistical characteristics of wind-shear turbulence are modelled. Isotropic turbulence serves as the basis of comparison for the anisotropic turbulence which exists in wind shear. The question of how turbulence scales in a wind shear is addressed from the perspective of power spectral density.

Trevino, G.↗
NASA NTRS1989

Structure of wind-shear turbulence

The statistical characteristics of wind shear turbulence are modelled. Isotropic turbulence serves as the basis of comparison for the anisotropic turbulence which exists in wind shear. The question of turbulence scales in wind shear is addressed from the perspective of power spectral density.

Trevino, G.↗
NASA NTRS1988

Model-based satellite acquisition and tracking

A model-based optical processor is introduced for the acquisition and tracking of a satellite in close proximity to an imaging sensor of a space robot. The type of satellite is known in advance, and a model of the satellite (which exists from its design) is used in this task. The model base is used to generate multiple smart filters of the various parts of the satellite, which are used in a symbolic multi-filter optical correlator. The output from the correlator is then treated as a symbolic description of the object, which is operated upon by an optical inference processor to determine the position and orientation of the satellite and to track it as a function of time. The knowledge and model base also serves to generate the rules used by the inference machine. The inference machine allows for feedback to optical correlators or feature extractors to locate the individual parts of the satellite and their orientations.

Casasent, David↗
NASA NTRS1988

Diabatic initialization for a mesoscale model simulation experiment

A mesoscale model simulation of a 'surrogate' atmosphere designed for the evaluation of adiabatic initialization and moisture enhancement techniques is briefly described. The simulation provides mesoscale precipitation rates and associated diabatic heating fields which are known exactly and are internally consistent within the context of the model. The advantage of this approach is that a numerical model can easily serve as a source of mesoscale data in the usual absence of internally consistent mesoscale observed data sets.

Kalb, Michael W.↗
NASA NTRS1988

A miniature, infrared pressure telemetry system

A miniature, single-channel, infrared telemetry system designed for making base pressure measurements on a wind tunnel model has been developed for the 13-inch magnetic suspension and balance system (MSBS) at Langley Research Center. The system consists of a transmitter installed in the wind tunnel model and a receiver station located outside of the test section. The onboard transmitter package includes a miniature pressure transducer, a signal conditioning circuit, and IR LED and a hearing-aid battery package. The IR LED, which is mounted flush with the model's surface, serves as the transmitter. The system is automatically activated in a magnetic field and has low power requirements. The system has been successfully employed to make low speed base pressure measurements at the 13-inch MSBS. The battery powered telemetry transmitter has a demonstrated one-hour operating life and an overall precision of better than 1/2 percent full scale.

Tcheng, Ping↗
NASA NTRS1991

The range scheduling aid

The Air Force Space Command schedules telemetry, tracking and control activities across the Air Force Satellite Control network. The Range Scheduling Aid (RSA) is a rapid prototype combining a user-friendly, portable, graphical interface with a sophisticated object-oriented database. The RSA has been a rapid prototyping effort whose purpose is to elucidate and define suitable technology for enhancing the performance of the range schedulers. Designing a system to assist schedulers in their task and using their current techniques as well as enhancements enabled by an electronic environment, has created a continuously developing model that will serve as a standard for future range scheduling systems. The RSA system is easy to use, easily ported between platforms, fast, and provides a set of tools for the scheduler that substantially increases his productivity.

Halbfinger, Eliezer M.↗