Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A 1D coupled transport/cold plasma wave model for parallel ponderomotive density modification near RF actuators

The plasma density profile close to RF actuators plays a vital role in the efficiency of power coupling from the antenna to the core plasma of fusion devices. Nonlinear interactions can be significant when considering the interaction of applied RF power and the tenuous SOL plasma, and the inclusion of this region in computational analysis is essential to providing robust predictive simulations of plasma response to RF application. Of particular interest is the observed density modification during RF operation. Here we present a self consistent description of the nonlinear ponderomotive force in the antenna near field region, via coupling a 1D field aligned transport model with a 1D cold plasma wave model. Results are presented, which show a parallel electric field of 300 Vm -1 drove a density reduction of ~ 20% over 25 RF periods.

Barnett, Rhea↗
DOE OSTI2021

Characterization of injection and confinement improvement through impurity induced profile modifications on the Wendelstein 7-X stellarator

Pulsed injections of boron carbide granules into Wendelstein 7-X stellarator (W7-X) plasmas transiently increase the plasma stored energy and core ion temperatures above the reference W7-X experimental programs by up to 30%. In a series of 4 MW electron cyclotron resonance heating experiments, the PPPL Probe Mounted Powder Injector provided 50 ms bursts of 100 μm granules every 350 ms at estimated quantities ranging from approximately 1 mg/pulse to over 30 mg/pulse. For each injection, the stored energy was observed to initially drop and the radiated power transiently increased, while the radial electron density profile rose at the edge as material was assimilated. Once the injected boron carbide was fully absorbed, the density rise transitioned to the core while the stored energy increased above the previous baseline level by an amount linearly correlated with the injection quantity. During the injection, the ion temperature gradient steepened with peak core ion temperatures observed to increase from a nominal 1.7 keV to over 2.6 keV for the largest injection amounts. Enhanced performance is accompanied by a reversal of the radial electric field at ρ < 0.3, indicating that the core transport has switched to the ion root. These observations are suggestive of a change in transport and provide further evidence that externally induced profile modifications provide a possible path to enhanced W7-X performance metrics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Response to “Comment on ‘Modification of Lie's transform perturbation theory for charged particle motion in a magnetic field’” [Phys. Plasmas 30 , 104701 (2023)]

Dr. Brizard's comment on my work is based on a conceived procedure that does not come from my work. The defense of his claim that the modification of the so-called standard Lie's transform theory is unnecessary is also unsupported. This response reveals in detail the inconsistency issues in the so-called standard Lie's transform theory by analyzing both its results and root causes. The problem in the so-called standard Lie's transform theory is beyond the issue to take into account the ordering difference between the guiding center motion and gyromotion. Here, the inconsistent commutation of derivative and limit causes another issue. In addition, the so-called standard Lie's transform formulation leads to an unnecessarily lengthy and tedious derivation process for a one or two page task under the singular (or renormalized) formalism described in my paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Modification of wind turbine wakes by large-scale, convective atmospheric boundary layer structures

In this study, we consider the impact of large-scale, convective structures in an unstable atmospheric boundary layer on wind turbine wakes. Simulation data from a high-fidelity large-eddy simulation (LES) of the AWAKEN wind farm site matching unstable atmospheric conditions were analyzed, and both turbine performance and wake behavior were affected based on their location relative to the convective structures. Turbines located in updraft regions of the flow experienced lower inflow velocity and generated less power, but their wakes were observed to recover faster and saw greater turbulent kinetic energy mixing higher in the boundary layer. The opposite effect was found for turbines in the downdraft regions of the convective structures. A simplified model of this wake behavior was also developed based on a two-dimensional k–ε Reynolds-Averaged Navier–Stokes formulation. This simplified model included the effects of vertical transport, but could be efficiently solved as a parabolic system, and was found to capture similar wake modifications observed in the high-fidelity LES computations.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Modifications in the charge trap landscape in Hf 0.5 Zr 0.5 O 2 as a function of oxygen vacancy concentration observed with photoemission electron microscopy

Oxygen vacancies in Hf x Zr (1-x) O 2 (HZO) both contribute to stabilization of the ferroelectric orthorhombic phase and promote leakage pathways that limit the endurance of devices based on the material. Here, for this reason, the defect states of oxygen vacancies were investigated using photoemission electron microscopy (PEEM) and photoluminescence spectroscopy (PL), as their concentration was varied via ex situ laser exposure. Following a controlled oxygen vacancy reduction via visible (2.54 eV) laser dosing of HZO, deep-ultraviolet (DUV, 5.82 eV) PEEM was used to spatially probe the resulting mid-gap defect states and work function. Work function was found to increase monotonically with the laser-induced reduction in oxygen vacancy concentration culminating in a total increase near 70 meV. The change implies a Fermi level shift toward the valence band as the total available electron-filled charge states are reduced with the removal of oxygen vacancies. A reduction in charge states is corroborated by the observed lessening of both photoemission and photoluminescence intensities after laser dosing. The deduced position of the Fermi level is within a band of near-conduction band defect states produced by oxygen vacancies that are linked to endurance limiting leakage currents. Together, these results directly identify the primary role of oxygen vacancies on the defect states in HZO while demonstrating that laser exposure can be used for their modification.

42 ENGINEERING↗
DOE OSTI2020

Analysis of laser-induced modification of collagen structure using nonlinear optical microscopy

Nonlinear optical microscopy is used to monitor changes in the collagen structure of patellar ligament after IR laser heating up to a temperature of 60 °C. Pre-denaturation modification of the tissue matrix exhibits specific properties and consists in splitting of initially parallel fibre bundles into array of divergent fibres. Image processing employing Fast Fourier transform analysis is used for characterising images of the fibre structure and determining the collagen orientation index. An increase in manifestation of laser-induced disordering with an increase in IR laser radiation power from 0.3 to 2 W is accompanied by a decrease in the collagen orientation index. The specific disorganisation of the collagen tissue structure during laser heating is supposed to be due to fast speed and local action of the laser heating, which leads to mechanical distortions of the structural elements of tissue matrix. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modification of Wool Fibers via Base/Cationic Detergent Pretreatment and Transglutaminase-mediated Reaction of Keratin

The surface modification of wool fibers is an important part of the textile industry to add functionality and stability to wool products. In this study, we developed a process utilizing a base/cationic surfactant solution pretreatment followed by an enzyme-mediated keratin crosslinking reaction to modify the wool fibers. Changes in water contact angle demonstrated the successful transformation of the hydrophobic wool surface to a more hydrophilic one after soaking in sodium carbonate solution containing hexadecyltrimethylammonium bromide (CTAB). The treated fabrics were further characterized by colorimetry and fluorescent spectrometry. Results showed that the pretreatment increased the yellowness of fabrics and caused some structural changes among certain amino acids, such as tryptophan and cystine. Keratin extracted from coarse wool fibers was further applied on pretreated fabrics through a microbial transglutaminase (mTGase) mediated reaction under mild conditions. Morphological characterization via SEM demonstrated the effective coverage of keratin on the scales of wool. The current method may provide an alternative processing protocol to modify wool fibers and improve the quality and performance of wool products.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Elimination of MHD current sheets by modifications to the plasma wall in a fixed boundary model

Models of magnetohydrodynamic (MHD) equilibia that for computational convenience assume the existence of a system of nested magnetic flux surfaces tend to exhibit singular current sheets. These sheets are located on resonant flux surfaces that are associated with rational values of the rotational transform. We study the possibility of eliminating these singularities by suitable modifications of the plasma boundary, which we prescribe in a fixed boundary setting. We find that relatively straightforward iterative procedures can be used to eliminate weak current sheets that are generated at resonant flux surfaces by the nonlinear interactions of resonating wall harmonics. These types of procedures may prove useful in the design of fusion devices with configurations that enjoy improved stability and transport properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Modification of the magneto-hydrodynamic equilibrium by the lower-hybrid wave driven fast electrons on the TST-2 spherical tokamak

Presence of a large population of fast particles may qualitatively modify the tokamak equilibrium from the one that can be described by standard magneto-hydrodynamics (MHD). The kinetic modification of the MHD equilibrium was studied for a lower-hybrid (LH) wave driven plasma on the TST-2 spherical tokamak. The analysis was performed using an equilibrium reconstruction method based on an extended MHD model that considers a two-component plasma of bulk MHD fluid and kinetic fast electrons. Scrape-off-layer current appeared naturally in the extended MHD analysis because of the finite electron orbit excursion from the flux surfaces. This reduced the bulk pressure contribution to the toroidal current substantially. Furthermore, the resulting poloidal flux profile was more consistent with that inferred from the Thomson scattering measurement.

extended magneto-hydrodynamics↗
DOE OSTI2025

Plasma modification through boron particulate injection in the full tungsten environment of WEST

Recent experiments have confirmed the compatibility of extended boron particulate injections with high performance plasma discharges in the full tungsten (W) environment of WEST. Utilizing an impurity powder dropper (IPD) equipped with boron (B) powders a series of extended experimental programs providing controlled injections have quantified plasma response to varying levels of injection rate and total injection quantity. Calibration of injection quantities confirmed through post-situ testing of the IPD and cross-correlated with both high-speed camera illumination and spectroscopic measurement have allowed for the first time a fine scale determination of the effects of powder introduction on plasma performance. Plasma enhancement, consistent with turbulence reduction through profile modification, has been observed with sustained increases in the stored energy (WMHD), by 18%, electron temperature (T e ) by 35%, and neutron rate (N n ) by up to 200%, all of which scale positively with increasing powder injection rates. These injections have also resulted in both prompt and extended reductions in native impurity content, decreases in post injection radiated power, and strong decreases in divertor deuterium signatures signifying a reduction in recycling suggesting enhanced boron layer formation which provides a reduction of source terms and leads to enhanced gettering of main ion and impurity sources.

Lunsford, R. [Princeton Plasma Physics Laboratory ↗
DOE OSTI2023

Modification of the MTS model for high strain-rate behavior of TI-6AL-4V

The Mechanical Threshold Stress (MTS) model provides excellent predictive capabilities for the material constitutive response for a wide range of temperatures and strain rates. However, the MTS model fails to capture the rapidly increasing yield stress at high strain rate behavior as the deformation controlling mechanism transitions from thermal activation to drag mechanisms, only capturing the linear behavior. Further, the model typically over predicts the flow stress behavior at yield and post yield due to its use of a constant work hardening rate parameter derived from the stress–strain response at constant saturation stress. An alternative approach to fitting portions of the MTS model is investigated and mathematical models are developed to address these issues. The results show that with appropriate experimental data, the mechanical threshold stress and work hardening rate parameters within the MTS model can quite easily and accurately be modified to extend applicability to high strain rate behavior and more accurately model the initial flow stress behavior at early work hardening rates without modification of the functions core to the MTS model itself.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cryo-EM structures of DNA-free and DNA-bound BsaXI: architecture of a Type IIB restriction–modification enzyme

Abstract We have determined multiple cryogenic electron microscopy (cryo-EM) structures of the Type IIB restriction–modification enzyme BsaXI. Such enzymes cleave DNA on both sides of their recognition sequence and share features of Types I, II, and III restriction systems. BsaXI forms a heterotrimeric (RM)2S assemblage in the presence and absence of bound DNA. Two unique structural motifs—a multi-helical “knob” and a long antiparallel double-helical “paddle”—are involved in DNA binding and cleavage. Binding of the DNA target triggers a large conformational change from an ‘open’ to ‘closed’ configuration, resulting in a mixture of two different conformations with respect to the positioning of the S subunit and its target recognition domains on the enzyme’s bipartite DNA target site. Structure-guided mutagenesis studies implicated two clusters of residues in the RM subunit as being critical for DNA cleavage, both are located proximal to a DNA cleavage site. One corresponds to a canonical PD-(D/E)xK endonuclease site in the N-terminal endonuclease domain, while the other corresponds to residues clustered within the paddle motif (near to the C-terminal end of the RM subunit). This analysis facilitates a comparison of three potential mechanisms by which such enzymes cleave DNA on each side of the bound target.

Shen, Betty W.↗
DOE OSTI2024

Linear Boltzmann transport for jet propagation in the quark-gluon plasma: Inelastic processes and jet modification

A linear Boltzmann transport (LBT) Monte Carlo model has been developed to describe jet propagation and interaction with the quark-gluon plasma (QGP) in relativistic heavy-ion collisions. A complete set of elastic-scattering processes and medium-induced gluon emissions based on the higher-twist formalism are incorporated for both jet shower and medium recoil partons. It has been employed to describe experimental data on large transverse momentum hadron and jet spectra, correlation and jet substructures in high-energy heavy-ion collisions. Here, we document in detail the structure of the model and validation of the Monte Carlo implementations of the physics processes in LBT, in particular, the inelastic process of medium-induced gluon radiation. We carry out a comprehensive examination of the jet-medium interaction as implemented in LBT through energy loss and momentum broadening of a single hard parton, the energy and transverse momentum transfer from leading partons to medium-induced gluons and jet-induced medium excitation, and medium modification of reconstructed jets in a static and uniform medium. With realistic and event-by-event hydrodynamic medium in heavy-ion collisions, we compute and compare with experimental data on the jet cone-size dependence of the single inclusive jet suppression at both the BNL Relativistic Heavy-Ion Collider (RHIC) and the CERN Large Hadron Collider (LHC), the dijet asymmetry at the LHC and γ-jet correlation at RHIC. Effects of medium-induced gluon emissions and jet-induced medium excitation on jet observables are systematically examined. Rescatterings of the radiated gluons and recoil partons with the QGP are found essential to account for the enhancement of soft particle yield toward the edge of the jet cone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Nuclear Modification Factor of Neutral Pions in the Forward and Backward Regions in p - Pb Collisions

The nuclear modification factor of neutral pions is measured in proton-lead collisions collected at a center-of-mass energy per nucleon of 8.16 TeV with the LHCb detector. The π 0 production cross section is measured differentially in transverse momentum (p T ) for 1.5 < p Τ < 10.0 GeV and in center-of-mass pseudorapidity (η c.m. ) regions 2.5 < η c.m. < 3.5 (forward) and -4.0 < η c.m .< -3.0 (backward) defined relative to the proton beam direction. The forward measurement shows a sizable suppression of π 0 production, while the backward measurement shows the first evidence of π 0 enhancement in proton-lead collisions at the LHC. Together, these measurements provide precise constraints on models of nuclear structure and particle production in high-energy nuclear collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Modification of χ c 1 ( 3872 ) and ψ ( 2 S ) Production in p Pb Collisions at s NN = 8.16 TeV

The LHCb Collaboration measures production of the exotic hadron χ c 1 ( 3872 ) in proton-nucleus collisions for the first time. Comparison with the charmonium state ψ ( 2 S ) suggests that the exotic χ c 1 ( 3872 ) experiences different dynamics in the nuclear medium than conventional hadrons, and comparison with data from proton-proton collisions indicates that the presence of the nucleus may modify χ c 1 ( 3872 ) production rates. This is the first measurement of the nuclear modification factor of an exotic hadron. © 2024 CERN, for the LHCb Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Search for Nuclear Modifications of 𝐵 + Meson Production in 𝑝-Pb Collisions at $\sqrt{𝑠_{NN}}$ = 8.16 TeV

Nuclear medium effects on 𝐵 + meson production are studied using the binary-collision scaled cross section ratio between events of different charged-particle multiplicities from proton-lead collisions. Data, collected by the CMS experiment in 2016 at a nucleon-nucleon center-of-mass energy of $\sqrt{𝑠_{NN}}$ = 8.16 TeV, corresponding to an integrated luminosity of 175 nb −1 , were used. The scaling factors in the ratio are determined using a novel approach based on the 𝑍 → 𝜇 − ⁢𝜇 + cross sections measured in the same events. The scaled ratio for 𝐵 + is consistent with unity for all event multiplicities, putting stringent constraints on nuclear modification for heavy flavor.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Thermal modifications of mesons and energy-energy correlators from real-time simulations of a 𝑈⁡(1) lattice gauge theory

We investigate thermal properties of a 𝑈⁡(1) lattice gauge theory in 1 + 1 dimensions through real-time simulations. We extract the spectral functions directly coupling to the pseudoscalar and scalar mesons, demonstrating the thermal modifications of these states with increasing temperatures. Introducing the notion of energy-flow operators, we quantify the temporal buildup of correlations in the energy flows across the lattice. We demonstrate that energy-energy correlators fail to factorize to products of energy flows, both in the vacuum and at nonzero temperature, indicating the presence of nontrivial correlations in the quantum states. Our results constitute a first real-time ab initio study of bound-state thermal broadening and finite temperature energy-flow correlations in a gauge theory, providing a benchmark for future studies of hadronic matter under extreme conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Modifications to the JET Shattered Pellet Injector to Optimize Disruption Mitigation Experiments for Supporting ITER’s DMS Design

Shattered pellet injection (SPI) experiments on Joint European Torus (JET) are an important element in determining the physics basis for mitigating disruptions in ITER. Here, the initial design of the JET SPI system included three barrels to produce pellets with diameters of 4.5, 8.1, and 12.5 mm. The variability of the pellet speed by operating with and without a mechanical punch was limited and led to poor pellet integrity, so the mechanical punch was removed. Fragment size distribution is a function of pellet speed and the desire to change the resulting fragment size distribution was not originally a requirement. After the first set of SPI experiments on JET, different pellet sizes were considered to enable dual injection experiments with identical pellet diameters. It was also determined that speed control is necessary to improve experimental repeatability and to determine how the fragment size distribution impacts mitigation performance. Two barrels were fabricated to form pellets of 10 mm diameter and a third to form an 8.1 mm diameter pellet. New propellant valves were also fabricated and characterized to improve repeatability and overall performance. To have fine control of pellet speed, inserts to reduce the breech volume were fabricated and installed. Laboratory testing was conducted to ensure pellet release and provide a comparison of propellant gas delivered versus pellet speeds for a range of pellet types and mixtures. This article will also discuss how lessons learned from the JET SPI modifications can be applied to other SPI systems, such as the ITER SPI system, as controlling pellet release with the least amount of propellant gas is essential for optimal SPI effectiveness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗