SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Tailoring Nanoporous Silica and Natural Straw Structural Insulation Composites

Nanoporous silica exhibits ultralow thermal conductivity as a result of its nanoscale pore size, high pore volume, and specific surface area. In this study, we report the self-assembled surfactant-templated synthesis of nanoporous silica, which is integrated with cellulose fibers derived from natural straw to manufacture high thermal insulation and mechanically robust nanocomposites. The nanocomposite shows a low thermal conductivity of 22.5 mW/(m·K), a compressive modulus of 0.93 MPa, and a hydrophobicity with a water contact angle of 125°. Moreover, we observed a marked reduction in water absorption capacity and a carbon footprint of 0.21 kg CO 2 equiv/kg. Here, this study provides a pathway toward the development of nanoporous structural insulation materials for energy-efficient building applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electrolyte–Electrocatalyst Interfacial Effects of Polymeric Materials for Tandem CO 2 Capture and Conversion Elucidated Using In Situ Electrochemical AFM

Integrating CO 2 capture and electrochemical conversion has been proposed as a strategy to reduce the net energy required for CO 2 regeneration in traditional CO 2 capture and conversion schemes and can be coupled with carbon-free renewable electricity. Polyethylenimine (PEI)-based materials have been previously studied as CO 2 capture materials and can be integrated in these reactive capture processes. PEI-based electrolytes have been found to significantly increase the CO 2 loading, and impact selectivity and rate of product formation when compared to the conventional aqueous electrolytes. However, the influence of these materials at the catalyst–electrode interface is currently not well understood. In this study, PEI-based electrolytes were prepared and their impact on the morphology of a silver electrode performing electrochemical CO 2 reduction (CO 2 R) was studied using in situ electrochemical atomic force microscopy (EC-AFM). The presence of PEI on the electrode surface could be distinguished based on nanomechanical properties (DMT modulus), and changes were observed as negative polarization was applied, revealing a reorganization of the PEI chains due to electrostatic interactions. These changes were impacted by the electrolyte composition, including the addition of supporting electrolyte KHCO 3 salt, as well as CO 2 captured by the PEI-based electrolyte, which minimized the change in surface mechanical properties and degree of PEI alignment on the electrode surface. The changes in surface mechanical properties were also dependent on the PEI polymer length, with higher molecular weight PEI showing different reconfiguration than the shorter polymer brushes. The study highlights that the choice of polymer material, the electrolyte composition, and CO 2 captured impact the nearelectrode environment, which has implications for CO 2 R, and presents EC-AFM as a new tool that can be used to probe the dynamic behavior of these interfaces during electrocatalysis.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Interconnected Nanoporous Polysulfone by the Self-Assembly of Randomly Linked Copolymer Networks and Linear Multiblocks

Porous materials have attracted considerable attention due to their versatile applications, especially in water purification. Interconnected nanoporous structures are distinguished by their high degree of porosity and resistance to clogging, as well as their insensitivity to nanostructural orientation. Previous works on randomly linked copolymer systems have shown that they can effectively produce disordered cocontinuous nanostructures, which upon removal of one component yield interconnected nanoporous materials. However, the cocontinuous nanomaterials previously developed using polystyrene (PS) and poly(d,l-lactic acid) (PLA) strands, and the resulting interconnected nanoporous PS monoliths, were far too brittle to enable practical use as membranes. Here, we study the self-assembly of randomly linked copolymer networks prepared using blocks of the engineering polymer polysulfone (PSU). A wide cocontinuous regime (spanning 40 wt %) was found for randomly end-linked copolymer networks (RECNs) constructed from PSU and PLA strands, via a combination of mechanical testing, gravimetry, small-angle X-ray scattering, and scanning electron microscopy. The PSU/PLA cocontinuous nanomaterial with symmetric composition showed 2.4 times higher Young’s modulus and ~100 times greater toughness than the corresponding PS/PLA sample. The interconnected nanoporous PSU fabricated after etching of PLA even exhibited 1.6 times greater toughness than PS/PLA prior to PLA removal. To facilitate the production of thin films of cocontinuous nanomaterials, we applied solution-processable randomly linked linear PSU/PLA multiblock polymers onto ultrafiltration membranes. Here, the interconnected nanoporous PSU thin film generated by etching PLA was found to effectively reject 50 nm diameter particles without significantly compromising permeability. This discovery presents a valuable addition to the existing techniques used to fabricate PSU membranes. In contrast to traditional methods, which are sensitive to processing conditions, produce a wide range of pore sizes, and offer limited adjustability of pore size, the current technique is anticipated to enable interconnected PSU membranes with more uniform and tailorable porosity.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Microstructural Assessment of Molybdenum Disulfide Coatings Using Nanoindentation Hardness

MoS 2 coatings are used extensively in aerospace and defense applications due to their ultralow friction and high wear resistance. Burnished and resin-bonded MoS 2 coatings are commonly used in these applications due to simplicity in deposition and history of use, despite issues with consistency in coating properties and performance. Physical vapor deposition (PVD) of MoS 2 thin films has emerged as a process alternative in the past 50 years, promising far greater control over film structure and composition but at a greater cost. Despite PVD’s benefits, hesitance to adoption persists in high-consequence applications, not only due to increased costs but variability in resulting coating properties. These variations in properties and subsequent performance are in part due to the complexity of the PVD process and the sensitive interplay between coating process-structure-property relationships. This work aims to demystify the remaining uncertainties of the process-structure-property relationships in PVD MoS 2 . The microstructure and mechanical and tribological properties of 61 different PVD pure MoS 2 coatings are examined herein. Emphasis has been placed on developing performance-based (i.e., hardness, modulus) metrics that can assess microstructural changes (density, orientation, and crystallinity) and be utilized to accelerate process development and coating optimization. Relationships established within suggest that nanoindentation hardness can be used to infer coating performance (i.e., wear rate) and properties (i.e., density, crystalline texture, and stoichiometry). Furthermore, this work demonstrates that PVD MoS 2 coatings close to the theoretical density of MoS 2 consistently have the best tribological performance and can be reliably identified by their hardness.

MoS2↗

DOE OSTI2024

Tailoring High Hardness and Rigidity in Biodegradable Thermoplastic Polyurethanes

In response to escalating environmental concerns, there is a pressing demand for materials capable of delivering both sustainability and robust mechanical properties, thereby substituting nonrenewable counterparts in various applications. This study presents a comprehensive investigation into the synthesis and characterization of biobased aliphatic thermoplastic polyurethanes (TPUs) that exhibit impressive mechanical properties, including tensile strength in the range of 48–41 MPa and flexural modulus up to 2.2 GPa. These biodegradable TPUs displayed high shore A and D hardness between 95 and 98 and 51–42, respectively, and thus can be categorized as “extra hard” plastics according to the durometer scale for PUs. Herein, we have prepared a series of four 100% biobased polyester polyols from biobased diacid and chain-extender as precursors with molecular weights varying from 500 to 1400 g/mol. The corresponding TPUs that were prepared by using an aliphatic diisocyanate were evaluated for their thermal stability, microphase separation, mechanical properties, and biodegradation. By leveraging renewable feedstocks, these TPUs offer a sustainable alternative to petroleum-derived materials, with their mechanical performance meeting conventional benchmarks. Furthermore, postcomposting analysis revealed significant surface degradation, affirming their biodegradability and environmental compatibility.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Static and Dynamic Thermomechanical Properties of Phase-Separated Epoxy Networks with Tuned Microstructures

Here, polymerization-induced phase separation is a useful method for the construction of heterogeneous epoxy networks with properties exceeding their homogeneous counterparts. In this work, we examine the static and dynamic thermomechanical properties of phase-separated epoxy networks salient to their application as encapsulants. Three heterogeneous epoxy-amine networks with nano-, meso-, and macro-phase-separated morphologies comprised of hard and soft domains are compared to a rigid, unstructured network. The glass transition profiles of the heterogeneous networks are complex, spanning many decades in the frequency domain. The nanophase-separated morphology leads to higher coefficient of thermal expansion, yet surprisingly is characterized by reduced residual stress. Under both quasi-static and dynamic compression (strain rates of order 10 –3 and 10 3 s –1 , respectively), the nanophase-separated network also exhibits higher modulus and strength. In split-Hopkinson bar experiments, the energy dissipation characteristics of the epoxy networks were nearly identical. Curiously, however, the Hugoniot response of the macro-phase-separated network determined by ballistic shockwave analysis indicates a remarkable ability of this material to mitigate shockwave propagation in comparison to many homogeneous and heterogeneous polymer materials. Collectively, this work reveals several previously unreported phenomena with respect to structure–property relationships in phase-separated epoxy networks, illustrating the potential value of systematically tuned microstructures for optimization of application-specific physical properties.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Comparing the Effects of Side Chain Dipole–Dipole Interactions and Hydrogen Bonding on the Mechanical and Electrical Properties of Poly(3-hexylthiophene)

Poly(3-alkylthiophenes) are simple conjugated polymers with good electrical properties, but tend to be brittle, limiting their application. Here, we investigate how side chain modifications can improve their toughness without compromising their charge transport. Specifically, we compare a weak dipole–dipole interaction of ester groups with a stronger hydrogen-bonding interaction of the hydroxyl groups. Two copolymers with targeted 5 and 10 mol % ester-functionalized side chains were synthesized and hydrolyzed in the solid state to introduce hydroxyl groups. Both hydrolyzed polymers became insoluble in most organic solvents, providing a path to layer-by-layer solution processing. All polymers’ optical, thermal, structural, electrical, and mechanical properties were investigated. Optical spectroscopy revealed that functionalization at these low levels did not significantly affect aggregation or π–π stacking. Differential scanning calorimetry indicated reduced crystallinity in the functionalized copolymers compared to that of P3HT. Grazing-incidence wide-angle X-ray diffraction data showed that functionalization led to an increase in lamellar spacing without altering molecular orientation or π–π stacking. Mechanical testing highlighted that at the lower functionalization level, both ester and hydroxyl groups similarly enhanced toughness, suggesting that disorder, rather than the specific nature of the functional group, was responsible for these improvements. At the higher functionalization level, hydroxyl groups significantly increased the elastic modulus while also negatively impacting charge carrier mobility. This study suggests that with stronger hydrogen-bonding groups, only very small amounts can improve P3HT’s toughness. For a wider tunable range, it may be a better strategy to use weak interactions such as dipole–dipole interactions of ester groups.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Chemically and Mechanically Recyclable Vitrimers from Carbon Dioxide-Based Polycarbonates

Designing thermoset materials with dynamic crosslinks is an important strategy to mitigate rising global carbon dioxide emission levels. The development of polymers from sustainable feedstocks, with efficient manufacturing methods, for high-value applications, and with circular end-of-use solutions is essential for advancing material technologies. One approach involves exploiting carbon dioxide itself as feedstock to create high performance, sustainable materials, by enchaining 50 mol% CO2 via copolymerization with epoxides to yield polycarbonates. This work describes the synthesis, end-functionalization, and curing of poly(propylene carbonate) (PPC) and poly(cyclohexene carbonate) (PCHC) into beta-hydroxy ester vitrimers. These vitrimers demonstrate the ability to be mechanically reprocessed up to 3 times with retention of the material’s properties through dynamic transesterification exchange reactions. The polycarbonate vitrimers with gel fractions exceeding 90 % exhibit high tensile strength (> 50 MPa) and Young’s modulus (> 2 GPa), achieved by varying repeat unit structure in the polymer backbone from the low Tg PPC to the more rigid high Tg PCHC structures. Owing to an entropically favorable chain back-biting mechanism, the network chains can be cleaved and depolymerized into cyclic small molecules. In the case of PCHC, this process enables repolymerization back to polycarbonates with 69 wt.% CO2 retention through life-cycles. The promising mechanical performance and recyclability of these CO2-based polycarbonate vitrimers indicate their potential for sustainable, high-performance materials, paving the way for future innovations in circular polymer technologies and carbon capture utilization.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Conversion of Waste PET Plastic to Aramid Fiber

A three-step synthesis was used to convert waste polyethylene terephthalate (PET) into the high value polymer, poly-para-phenylene terephthalamide (PPTA), used in the production of high strength aramid fiber, such as Kevlar. Improvements to the polymerization reaction by addition of calcium chloride to the solvent, N-methyl-2-pyrrolidone (NMP), and rigorous anhydrous conditions enabled the production of a PET-derived PPTA with a 4.15 dL/g inherent viscosity in sulfuric acid that is amenable to fiber spinning. PPTA fibers were spun using a wet spinning apparatus under varied process parameters to assess their impact on fiber surface morphology, diameter, and the mechanical properties of the fibers. Select fibers were subjected to a post-spinning heat treatment at 150 °C , which improved the tensile strength and modulus by 100% and 30%, respectively, relative to the as-spun fibers. Techno-economic and life cycle analyses were conducted to evaluate the economic feasibility and the life-cycle greenhouse gases (GHG) emissions of the approach. In conclusion, the results suggest the potential for up to a 30% cost reduction, and comparable GHG emissions against conventional petroleum-based processes.

Lifecycle Analysis↗

DOE OSTI2026

3D-Bioprinted Marine Bacteria for the Degradation of Polyhydroxybutyrate Bioplastics

The severe, long-lasting harm caused by plastic pollution to marine ecosystems and coastal economies has led to the development of biodegradable plastics; however, their limited decomposition in marine environments remains a challenge. Here, technologies are presented for creating 3D-bioprinted living materials as a proof of concept for bioplastic degradation, with specific use in marine environments. The approach developed here integrates the halotolerant bioplastic-degrading bacterium Bacillus sp. NRRL B- 14911 into alginate-based bio-ink to print an engineered living material (ELM) termed a “bio-sticker.” Quantification of bacteria viability reveals that bioprinted marine bacteria survive within biostickers for more than 3 weeks. The rate at which the biostickers degrade the bioplastic polyhydroxybutyrate (PHB) can be tuned by altering biosticker biomass concentration, bioplastic concentration, or incubation temperature. Biostickers that are transferred to a different PHB sample still retain high biodegradation activity, demonstrating their reusability. Strain sweep oscillatory tests demonstrate that the biostickers display predominantly viscoelastic behavior. Monotonic tensile tests indicate that the elastic modulus and the adhesion of the biostickers are not negatively impacted by bacteria growth or incubation temperature. This work paves the way for the development of ELMs to facilitate the inclusion of bioplastics within the blue economy, promoting the emergence of more sustainable and ecofriendly materials.

3D bioprinting↗

DOE OSTI2026

Processing-Dependent Structure and Poroelasticity of Nafion in Liquid Water

Ionomers act as the solid polymer electrolyte membrane in many modern electrochemical devices, yet the role of their nanostructure in modulating the poroelastic response remains poorly understood, especially in liquid water, where few techniques can measure simultaneous transport-mechanical properties. Poroelastic Relaxation Indentation (PRI) is uniquely suited for measuring time-dependent transport-mechanical properties of porous solids, specifically hydraulic diffusivity, elastic modulus, Poisson’s ratio, and intrinsic permeability, for porous solids. While ionomers such as Nafion are not porous in the typical sense, Nafion has a nanophase-segregated structure that, when fully swollen in liquid water, behaves as a poroelastic solid with a coupled mechanical-transport response. Using a poroelastic framework, we investigate how casting and pretreatment of Nafion membranes alter their poroelastic response in liquid environments. We characterize both extruded and dispersion-cast Nafion membranes pretreated in water at 25 or 100 °C and relate the mechanical-transport properties to the ionomer structure via hydrophilic and intercrystalline domain spacing measured using Small-Angle X-ray Scattering (SAXS). At 25 °C, dispersion-cast membranes exhibit distinctly lower hydraulic diffusivity and intrinsic permeability than extruded membranes but with comparable mechanical properties. Pretreatment at 100 °C increases hydrophilic domain spacing, improving transport but at the expense of mechanical stiffness. Dispersion-cast membranes respond more strongly to pretreatment than extruded membranes. Using the Carman-Kozeny pore network model and the hydrophilic domain-spacing, we estimate the pore radius and tortuosity to show how pretreatment reduces structure-related tortuosity differences between dispersion-cast and extruded membranes. Here, in this work, we show that nanophase-segregated materials such as Nafion can be rigorously characterized using poroelasticity, resulting in physically meaningful transport-mechanical properties. Coupling PRI with SAXS provides insights into the nanostructural features that govern the coupled mechanical-transport response. By establishing PRI for a nanophase-segregated material, this approach opens avenues for this technique’s application in other hydrated polymeric materials not typically considered to be poroelastic.

Shen, Margaret [University of California, Berkeley↗

DOE OSTI2026

Effects of PLA/PHB Blend Ratio and Wood Flour Loading on the Melt Rheology and Thermomechanical Properties of Biobased Polymer Composites

The development of sustainable, biobased polymer composites is crucial for reducing supply chain dependence on fossil fuels. A major challenge lies in understanding and predicting the processability of these sustainable material alternatives, which directly impacts large-scale manufacturing. Here, this study systematically investigates the effect of poly(lactic acid) (PLA)/polyhydroxybutyrate (PHB) blend ratios and wood flour (WF) loadings on the thermal, rheological, and mechanical properties of the composites. Composites were prepared via melt compounding and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), oscillatory shear melt rheology, tensile testing, and scanning electron microscopy. Results showed that increasing the PHB content lowered the glass transition temperature, while higher PHB and WF loadings decreased thermal stability. Complex viscosity decreased with increasing PHB in 0 and 10% WF, whereas it increased in 20% and 30% WF for PHB-rich blends (80/20 and 70/30 PLA/PHB) due to stronger filler interactions with flexible PHB chains. At 30% WF, PHB-containing composites also showed elastic dominance with G′ higher than G″. This behavior was confirmed by van Gurp–Palmen plots, where the phase angle decreased with increasing PHB and WF loadings. WF addition also shifted Cole–Cole plots away from semicircular terminal relaxation, while time–temperature superposition validity was maintained, confirming that polymer chain dynamics continue to dominate melt behavior. Young’s modulus increased with WF loading, while tensile strength and toughness decreased due to weaker interfacial adhesion between the matrix and the filler. Interestingly, 10% WF systems containing PHB exhibited the highest toughness among all of the filled systems, indicating synergistic reinforcement from WF fillers and PHB-induced ductility. Overall, melt rheology effectively captured the internal structure and stiffness of the composites as the formulation changed, reinforcing the concept that the PLA/PHB ratio and WF content can be tuned to adjust melt elasticity and balance mechanical property trade-offs for targeted applications.

melt rheology↗

DOE OSTI2026

Polymorphism of Magnesium Chloride Decahydrate under High Pressures and Low Temperatures Found in Icy Moons

Magnesium chloride hydrates show a rich diversity of structural forms, with different hydration numbers ranging from 1 to 12. Here, we show that this structural versatility is also present within the same hydration numbers, with the formation of a new phase of magnesium chloride decahydrate (MgCl 2 ·10H 2 O-II) stable at the conditions of 0.03–0.40(14) GPa at 234(11) K and up to 2.11(3) GPa at 220(2) K, as determined by in situ single-crystal X-ray diffraction. The hydrogen bonding interactions of MgCl 2 ·10H 2 O-II are identified and the bulk modulus determined at B 0 = 18.9(12) GPa at 220(2) K. We discuss the implication of this high-pressure MgCl 2 hydrate for icy moon compositional investigations and showcase the structural and density changes between the various hydrates in MgCl 2 ·nH 2 O.

high pressure↗

DOE OSTI2025

Elastomer Mechanics of Cross-Linked Linear-Ring Polymer Blends

Cross-linking a blend of linear and ring polymers creates a new topology-based dual-network elastomer in which the two components differ significantly in their topology. We use molecular simulations and topological analysis to examine key mechanical properties as functions of ring polymer volume fraction Φ R . For Φ R < Φ R *, where the rings begin to overlap, the network shear modulus G and the maximum stretch ratio λ p are weakly dependent on Φ R . For Φ R > Φ R *, entanglements trapped in the network are diluted as the rings overlap, leading to a significant decrease in G and an increase in λ p with increasing Φ R . Here, the peak tensile stress, σ p , exhibits a maximum around Φ R *, indicating an enhancement of network strength due to the stronger cohesion from the entanglements between linear and ring polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Ductile Glassy Polymer Networks Capable of Large Plastic Deformation and Heat-Induced Elastic Recovery

Many thermoplastic polymers are ductile by combining strength and large deformations. These deformations are irreversible - known as plastic deformation. Elastomers can deform reversibly but have low strength. To this end, we developed glassy and ductile polyamide networks capable of large plastic deformation (>200% strain) and high strength (~50 MPa tensile strength and ~1500 MPa Young’s modulus), similar to those of polyolefins and Nylon-66. We discovered that hydrogen bonding between meta-phthalamide groups was essential to the ductility. Since these polyamide networks are covalently bonded, we demonstrated their unique durability by repeatable elastic recovery at elevated temperatures, exhibiting indifferent tensile properties in each cycle. Furthermore, when we fixed the strain during the elastic recovery, these polyamide networks actuated stresses of 9–18 MPa, among the highest reported in shape-memory polymer actuators. Here, we envision these ductile, glassy polymer networks as promising alternatives to ductile thermoplastics, given the combined benefit of ductility and durability.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Mechanical Toughening of Two-Dimensional Covalent Organic Frameworks Enabled by Graphene-Based Sandwich-Structured Nanocomposites

Low resistance to fracture in two-dimensional covalent organic frameworks (2D COFs) limits their practical applications, especially in mechanically demanding fields, such as flexible electronics and sensing devices. We address this critical limitation by fabricating a sandwich-structured nanocomposite consisting of graphene layers sandwiched between 2D COF layers (2D COFs/graphene/2D COFs) via chemical vapor deposition. Here, our sandwich-structured nanocomposites exhibit a remarkable improvement in modulus E, fracture toughness K IC , and critical energy release rate G C compared to pure 2D COFs. This enhancement is likely due to the graphene layers as the backbone of the sandwich structure effectively carrying and redistributing mechanical stress within the nanocomposite. Our findings demonstrate that a sandwich structure can improve the mechanical robustness of a 2D COF so that it can preserve the functionality and mechanical integrity for applications in stretchable electronics.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Nitrogen Vacancies Induce Fatigue in Ferroelectric Al 0.93 B 0.07 N

Wurtzite ferroelectrics (e.g., Al 0.93 B 0.07 N) are being explored for high-temperature and emerging near-, or in-compute, memory architectures due to the material advantages offered by their large remanent polarization and robust chemical stability. Despite these advantages, current Al0.93B0.07N devices do not have sufficient endurance lifetime to meet roadmap targets. To identify the defects responsible for this limited endurance, a combination of electronic measurements and optical spectroscopies characterized the evolution of defect states within Al 0.93 B 0.07 N with cycling. Ultrathin (∼10 nm) metal contacts were used to optically probe regions subject to ferroelectric switching; photoluminescence spectroscopy identified the emergence of a transition near 2.1 eV whose intensity scaled with the non-switching polarization quantified via positive-up negative-down (PUND) measurements. Accompanying thermally stimulated depolarization current (TSDC) and modulus spectroscopy measurements also observed the strengthening of a state near 2.1 eV. The origin of this feature is ascribed to transitions between a nitrogen vacancy and another defect deeper in the bandgap. Recognizing that the impurity concentration is largely fixed, strengthening of this transition indicates an increase in the number of nitrogen vacancies. Switching, therefore, creates vacancies in Al 0.93 B 0.07 N likely due to hot-atom damage induced by the aggressive fields necessary to switch wurtzite materials that ultimately limits endurance.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Validated Reactive Force Field Quantifies MXene Interfacial Properties, Mechanics, and Thermal Transport

MXenes combine rich surface chemistry, mechanical strength, and high conductivity for a multitude of emerging applications. Predictive modeling supports accelerated materials designs and has been limited by the absence of validated and transferable force fields. Here, we introduce an interpretable, reactive INTERFACE force field (IFF and IFF-R) for Ti 3 C 2 T x MXenes that is trained based on chemical knowledge and achieves quantitative agreement with experiments across lattice parameters (<0.5%), density (<0.2%), liquid contact angles, Raman spectra, and the in-plane elastic modulus (∼320 GPa). The models cover surface terminations from hydroxyl (−OH) to fluorine (−F) groups and are extensible to other chemistries. We introduce pH-resolved surface chemistry and identify dopamine adsorption mechanisms at MXene–aqueous interfaces supported by QCM-D and UV–Vis experiments. The data reveal coplanar and perpendicular binding modes and concentration-dependent multilayer assembly. We predict previously inaccessible properties, including termination-dependent cleavage energies, interlayer shear moduli and dynamic shear failure, nanoindentation and brittle fracture, anisotropic in-plane and out-of-plane thermal conductivities, including the role of defects. Agreement with available experimental data is consistently close and exceeds DFT accuracy across the benchmark properties examined. The IFF/IFF-R model is compatible with CHARMM, AMBER, OPLS, and CVFF force fields for simulations of MXenes with diverse surface terminations, electrolyte interfaces, biointerfaces, and polymer composites without additional parameters. Parameter sets, 3D models, and analysis scripts are provided for community use. The validated, reactive, and transferable IFF framework facilitates predictive design of MXene-based films, membranes, sensing interfaces, and composites.

MXene↗