Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multi- Component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Impressed Sources and Fields in the Volume-Integral-Equation Formulation of Electromagnetic Scattering by a Finite Object: A Tutorial

Although free space cannot generate electromagnetic waves, the majority of existing accounts of frequency-domain electromagnetic scattering by particles and particle groups are based on the postulate of existence of an impressed incident field, usually in the form of a plane wave. In this tutorial we discuss how to account for the actual existence of impressed source currents rather than impressed incident fields. Specifically, we outline a self-consistent theoretical formalism describing electromagnetic scattering by an arbitrary finite object in the presence of arbitrarily distributed impressed currents, some of which can be far removed from the object and some can reside in its vicinity, including inside the object. To make the resulting formalism applicable to a wide range of scattering-object morphologies, we use the framework of the volume integral equation formulation of electromagnetic scattering, couple it with the notion of the transition operator, and exploit the fundamental symmetry property of this operator. Among novel results, this tutorial includes a streamlined proof of fundamental symmetry (reciprocity) relations, a simplified derivation of the Foldy equations, and an explicit analytical expression for the transition operator of a multi-component scattering object.

Symmetry relations↗

Fundamental Improvement of a Convergence Test for Iterative Strain-Gage Balance Load Predictions

A fundamental improvement of a convergence test for wind tunnel strain-gage balance load iterations was developed. The improvement became necessary because incorrect test results were obtained whenever the original test was applied to multi-component balances with large load capacity differences. The original test was first published in NASA TN D-6860. It uses an upper bound of the Lipschitz constant to assess convergence characteristics of balance load predictions whenever the Iterative Method is applied. The Lipschitz constant is a function of the partial derivatives of each balance load component with respect to all other load components. Unfortunately, the original definition of the convergence test overlooked the fact that the Lipschitz constant is a dimensionless quantity and that the partial derivative of one load component with respect to another load component is not always dimensionless. Therefore, an improvement of the original test was successfully developed that uses load capacities to make all inputs for the calculation of the Lipschitz constant dimensionless before use. Results from the calibration data analysis of a six-component force balance and a five-component semi-span balance are used to illustrate the application of the improved load iteration convergence test.

Strain-Gage Balance↗

3D Phase-Field Simulations of Pattern Formation During Freeze Casting

We present the results of a combined experimental and phase-field modeling study of pattern formation during freeze casting. Those studies use unidirectional freezing of simple binary liquid mixtures of water and sugars (sucrose and trehalose) in a temperature gradient, which suffice to produce hierarchical templated structures similar to those observed in more complex multi-component freeze-cast systems including lamellae, undulated ridges, and more exotic “jellyfish-like” substructures. Multiscale 3D phase-field simulations reproduce remarkably well those structures quantitatively and identify key properties of the ice-water interface that control their formation. They further reveal that lamellae form as a result of a novel symmetry-breaking secondary instability of partially faceted cellular structures and pinpoint additional secondary instability mechanisms giving rise to smaller-scale substructures.

Kaihua Ji↗

Laboratory Studies of Astronomical Ices: Reaction Chemistry and Spectroscopy

In this article, we will describe the work of the Cosmic Ice Laboratory at NASA’s Goddard Space Flight Center to characterize the composition of and to understand the chemistry occurring in icy bodies in the Solar System and beyond. Our work has touched on a wide range of extraterrestrial environments including icy interstellar grains, small bodies such as comets and asteroids, and planets and moons. We are especially interested in the chemical and physical changes that occur in ices as a result of thermal changes or exposure to radiation. To this end, we conduct experiments designed to simulate cold extraterrestrial environments and measure physical properties of single- and multi-component ices. We expose ices to radiation (e.g., MeV protons or keV-MeV electrons) or high-energy photons (e.g., UV) to initiate physical and chemical changes. We conduct experiments using cryo-vacuum chambers equipped with analytical tools and radiation sources to make most of our measurements, including the collection of all spectroscopic data,in situ. When possible and appropriate, we also collect reaction products for further ex situ analysis. The work of the Cosmic Ice Lab provides critical data to astrochemists and others seeking to understand observations, make predictions, and plan future space missions.

Christopher K Materese↗

3D Phase-Field Simulations of Pattern Formation During Freeze Casting

We present the results of a combined experimental and phase-field modeling study of pattern formation during freeze casting. Those studies use unidirectional freezing of simple binary liquid mixtures of water and sugars (sucrose and trehalose) in a temperature gradient, which suffice to produce hierarchical templated structures similar to those observed in more complex multi-component freeze-cast systems including lamellae, undulated ridges, and more exotic “jellyfish-like” substructures. Multiscale 3D phase-field simulations reproduce remarkably well those structures quantitatively and identify key properties of the ice-water interface that control their formation. They further reveal that lamellae form as a result of a novel symmetry-breaking secondary instability of partially faceted cellular structures and pinpoint additional secondary instability mechanisms giving rise to smaller-scale substructures.

Kaihua Ji↗

Design of a Jettison System For Space Transit Vehicles

Many options to re-use waste are currently being developed by NASA. These include combustion, compaction, torrefaction, and converting waste materials to an easily stored base polymer for future use. Human exploration missions require large amounts of supplies such as food, clothing and spare parts. A many-month journey to Mars will result in the generation of a substantial amount of problematic waste products. It is thought that this waste must be discarded to enable a Mars transit mission. The most cost-effective, reliable, and safest method to address this problem may be to simply jettison these materials from the spacecraft. The ability to jettison requires a multi-component integrated system design. Major components include a launcher, airlocks, trash bags, and tracking system. Depending upon mission requirements, a jettison dedicated airlock may be necessary. In other cases, the crew airlock might be all that’s needed. Examples of what to jettison include food waste, fecal containers, broken equipment, foam, expendables, hygiene products, health items, wipes, and clothing. The most important design factor is always crew safety. Other features to consider are loss of air due to the inefficiencies of vacuum pumps in the airlock, outgassing from the bags, and liquids condensing on the airlock that result in unwanted coatings. The launching system design must consider many different features: while in planetary orbit, a minimum exit velocity is necessary so the jettisoned material will not complete an orbit only to return and strike the ship. Also, for planetary protection issues, enabling waste to be sent to distant non-critical locations is highly desirable. When the space craft is in planetary transit to say, Mars, the jettison exit velocity should be low if the material is not released along the direction of travel. This is to minimize trajectory perturbations due to jettison-imposed torque on the spacecraft. Design considerations for the launcher include exit velocity, power consumption, volume and mass of material jettisoned, and frequency of jettison. Finally, the launcher must be able to handle many different types and shapes of waste products. This paper will discuss these design issues and give guidance to a pathway forward.

Steve Sepka↗

Quantifying Feedback from Narrow Line Region Outflows in Nearby Active Galaxies. III. Results for the Seyfert 2 Galaxies Markarian 3, Markarian 78, and NGC 1068

Outflows of ionized gas driven by active galactic nuclei (AGN) may significantly impact the evolution of their host galaxies. However, determining the energetics of these outflows is difficult with spatially unresolved observations that are subject to strong global selection effects. We present part of an ongoing study using Hubble Space Telescope and Apache Point Observatory spectroscopy and imaging to derive spatially resolved mass outflow rates and energetics for narrow-line region outflows in nearby AGN that are based on multi-component photoionization models to account for spatial variations in gas ionization, density, abundances, and dust content. This expanded analysis adds Mrk 3, Mrk 78, and NGC 1068, doubling our earlier sample. We find that the outflows contain total ionized gas masses of M ≈ 10(exp 5.5)-10(exp 7.5) M⨀ and reach peak velocities of v ≈ 800-2000 km s(exp -1). The outflows reach maximum mass outflow rates of M(sub OUT) ≈ 3-12 M⨀ yr(exp -1) and encompass total kinetic energies of E ≈ 10(exp 54)-10(exp 56) erg. The outflows extend to radial distances of r ≈ 0.1-3 kpc from the nucleus, with the gas masses, outflow energetics, and radial extents positively correlated with AGN luminosity. The outflow rates are consistent with in situ ionization and acceleration where gas is radiatively driven at multiple radii. These radial variations indicate that spatially resolved observations are essential for localizing AGN feedback and determining the most accurate outflow parameters.

Active galaxies↗

Parallel Grand-Canonical Monte Carlo (ParaGrandMC) User’s Manual Version 2.0

This manual describes the commands and command line options for the Parallel Grand Canonical Monte Carlo version 2.0 (ParaGrandMC.2.0) simulation code. This is a highly scalable parallel FORTRAN 2003 code for simulating the thermodynamic evolution of materials at the atomic level, and predicting their thermodynamic state, phase diagram, chemical composition and mechanical properties. The code is specifically designed to simulate multi-component alloy systems, predict solid-state phase transformations such as austenite-martensite transformations, precipitate formation, recrystallization, capillary effects at interfaces, surface absorption, etc., which can aid the design of novel metallic alloys. While the software is mainly tailored for modeling metal alloys, it can also be used for other types of solid-state systems, and to some degree for liquid or gaseous systems, including multiphase systems forming solid-liquid-gas interfaces. In addition to performing Monte Carlo (MC) simulations, the code can also perform Molecular Dynamics (MD) and Langevin Dynamics (LD) simulations, which can be combined and interchanged with MC for faster and more efficient system evolution. A detailed description of the MC part of the code is provided in the NASA ParaGrandMC report: NASA/CR–2016-219202; http://www.sti.nasa.gov.

High performance computing↗

Adaptative Site Management for a 115 Acre Chlorinated Solvent Plume with Two Separate Source Areas at Kennedy Space Center, Florida

Background/Objectives. During Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) activities, Geosyntec delineated a chlorinated volatile organic compound (CVOC) plume at the National Aeronautics and Space Administration’s (NASA’s) Vehicle Assembly Building (VAB) area located at KSC, Florida. The RFI activities identified an approximate 115-acre dissolved plume (primarily vinyl chloride) and a trichloroethene (TCE) source area in an active aerospace complex that is surrounded by sensitive wetland/waterbodies. Due to the size of the impacted area, the Corrective Measure Design included a multi-component strategy: (i) address the source area via bioremediation; (ii) protect sensitive wetlands from impacted groundwater discharge via biosparging; and (iii) Long Term Monitoring (LTM) of the remaining dissolved plume. After the Corrective Measures implementation (CMI), NASA and Geosyntec worked with Florida Department of Environmental Protection (FDEP) to implement an adaptive site management for the complex, 115-acre site outside of the traditional RCRA process. The adaptive site management approach relied on performing supplemental assessments and implementing Interim Measures (IMs) to further assess and implement remedies over time while working within site and budget constraints, with an overall goal of achieving enough mass reduction to transition the entire site to LTM and eventually achieve site closure. Approach/Activities. After the biosparge barrier was operational and bioremediation within the source area (referred to as Hot Spot 1) achieved the Corrective Action Objective (CAO), supplemental assessment of the area between Hot Spot 1 and the biosparge barrier was performed. The conceptual site model was updated using the supplemental assessment results and an air sparge system IM was designed to treat an approximate 1.2 acre area (referred to as Hot Spot 2). After installation of the air sparge system, supplemental assessment within the remainder of the 115-acre dissolved plume was performed and a second TCE source area was identified. The TCE source area and associated areas with elevated CVOC concentrations (referred to as Hot Spot 3) were delineated and a bioremediation IM was implemented. Also, the downgradient impacts from Hot Spot 3 were adjacent to a sensitive waterbody, and negotiations with the FDEP allowed the area to be monitored using LTM. Results/Lessons Learned. The performance of supplemental assessment activities and implementation of remedial alternatives as IMs allowed NASA to successfully address groundwater impacts over time, while working within the FDEP regulatory framework. The implementation of the CMI and multiple IMs has achieved the following goals: (i) the biosparge barrier has mitigated the potential discharge of impacted groundwater to an adjacent wetland; (ii) enhanced bioremediation within Hot Spot 1 achieved the CAO within 2 years and transitioned the area into LTM; (iii) operation of an air sparge system within Hot Spot 2 removed TCE as a constituent of concern and contributed to a reduction (approximately 43%) in the impacted groundwater area outside the air sparge treatment area (plume collapse); and (iv) bioremediation within Hot Spot 3 removed approximately 80% of the CVOC mass and contributed to a reduction (approximately 47%) in the impacted groundwater area outside the bioremediation IM treatment area. Overall, the adaptive approach is protecting the sensitive water bodies surrounding the complex site and reducing the area of impacted groundwater, which is moving the entire site towards LTM.

Rebecca C Daprato↗

Ab-Initio Study of Stacking Fault Segregation Behavior in Ni-based Superalloys at High Temperatures

Ni-based superalloys demonstrate extraordinary creep properties compared to traditional metallic systems due to the formation of L12 (γ’) precipitates. Despite experimental evidence of alloying element segregation to the stacking faults, prior ab-initio efforts indicated repulsion of Nb from superlattice intrinsic stacking faults (SISFs) . Due to the importance of this element in key strengthening mechanisms, we developed a new technique to account for multi-component segregation behavior at temperature combining ab-initio molecular dynamics (AIMD) and Monte-Carlo (MC) simulations. Using this technique, we replicated experimentally observed segregation behavior of Nb, Co, and Ti to the SISF in L12 (Figure 1). Furthermore, we investigated the co-segregation behaviors of individual pairs of alloying elements to determine the interaction effects which lead to this segregation behavior in the full alloy system. By simulating the reduced-chemistry models using our approach, we reconciled previous ab-initio calculations demonstrating repulsion of Nb from the SISF and the experimentally observed segregation behavior.

Molecular Dynamics↗

New Development Activities at NASA Ames in Reusable TPS Materials

Over the last few years, new activities in rapid, low-cost access to low-earth orbit (LEO) and hypersonic flight have refreshed interest in reusable thermal protection systems (RTPS) that have not had broad application since the Space Shuttle era. Development of novel systems having a greater consideration of full cycle cost (lower cost raw materials, manufacturing, integration, and refurbishment) in addition to improved performance are needed to enable this new generation of space flight. NASA Ames has a long history of RTPS development including invention of flexible blankets such as Advanced Flexible Reusable Surface Insulation (AFRSI), rigid ceramic tiles like Fibrous Refractory Composite Insulation (FRCI) and Alumina Enhanced Thermal Barrier (AETB), and multi-component systems like Toughened Uni-piece Fibrous Reinforced Oxidation-resistant Composite (TUFROC). In much more recent times, NASA Ames is supporting the growing commercial space field through internal research and development efforts for high-risk low TRL materials and collaboration with commercial partners including technology transfer. This talk will discuss the current development efforts that span broadly from updating legacy insulating systems with modern raw materials and processes to totally novel designs for heat pipes with various low-TRL activities in between. It will also discuss Ames’ recent re-investment in experimental capabilities to enable characterization and material testing.

Reusable thermal protection materials↗

New Development Activities at NASA Ames in Reusable TPS Materials

Over the last few years, new activities in rapid, low-cost access to low-earth orbit (LEO) and hypersonic flight have refreshed interest in reusable thermal protection systems (RTPS) that have not had broad application since the Space Shuttle era. Development of novel systems having a greater consideration of full cycle cost (lower cost raw materials, manufacturing, integration, and refurbishment) in addition to improved performance are needed to enable this new generation of space flight. NASA Ames has a long history of RTPS development including invention of flexible blankets such as Advanced Flexible Reusable Surface Insulation (AFRSI), rigid ceramic tiles like Fibrous Refractory Composite Insulation (FRCI) and Alumina Enhanced Thermal Barrier (AETB), and multi-component systems like Toughened Uni-piece Fibrous Reinforced Oxidation-resistant Composite (TUFROC). In much more recent times, NASA Ames is supporting the growing commercial space field through internal research and development efforts for high-risk low TRL materials and collaboration with commercial partners including technology transfer. This talk will discuss the current development efforts that span broadly from updating legacy insulating systems with modern raw materials and processes to totally novel designs for heat pipes with various low-TRL activities in between. It will also discuss Ames’ recent re-investment in experimental capabilities to enable characterization and material testing.

Reusable thermal protection materials↗

Reusable TPS Materials Development Activities at NASA Ames

Recent developments in low-cost access to low-earth orbit (LEO) and hypersonic flight are driving renewed demand in reusable thermal protection systems (RTPS) that have not had broad application since the Space Shuttle era. Modern systems will need to consider full cycle cost (lower cost raw materials, manufacturing, integration, and refurbishment) in addition to improved performance to enable this new generation of space flight. NASA Ames Research Center (ARC) has a long history of RTPS development including modern state-of-the-art materials like Alumina Enhanced Thermal Barrier (AETB), and multi-component systems like Toughened Uni-piece Fibrous Reinforced Oxidation-resistant Composite (TUFROC). Now, ARC is supporting the growing commercial space field through internal research and development efforts for high-risk low TRL materials and collaboration with commercial partners including technology transfer. This talk will discuss the current development efforts at ARC that span updating legacy insulating systems with modern raw materials and processes to totally novel designs for heat pipes with various low-TRL activities in between. It will also discuss Ames’ recent re-investment in experimental capabilities to enable characterization and material testing.

Adam Caldwell↗

Optimization of Rocket Engine Components using Multi-Metallic Additive Manufacturing

Additive manufacturing (AM) is advancing many applications of component design for liquid rocket engines. AM has been demonstrated in various rocket component applications using a variety of monolithic metal alloys, many of which are traditional alloys for extreme environments. NASA and industry partners have focused in recent years to advance processing to create bimetallic and multicomponent AM processes and materials. The role of multi-metallic AM offers advantages since it can further optimize weight, optimize reliability and performance by increasing the strength to weight ratio of a component, and can optimize materials for various engineering requirements. NASA’s Rapid Analysis and Manufacturing Propulsion Technology (RAMPT) project has designed and manufactured a series of additively manufactured (AM) coupled combustion chambers, nozzles, and other engine components to advance new AM processes and materials with the goal of reducing cost and schedule for engine manufacturing. These designs incorporated multimetallic AM, which further enabled carbon-fiber composite overwrap to reduce overall thrust chamber assembly (TCA) mass. Various AM processes were demonstrated on these components using a copper-based alloy/superalloy bimetallic solution. The AM processes being explored individually and in combination for bimetallic applications include Laser Powder Bed Fusion (L-PBF), Laser Powder Directed Energy Deposition (LP-DED), and cold spray. The combination of bimetallic material combinations explored in this research include GRCop-based alloys and superalloys, Inconel 625 or NASA HR-1. One unique development that will be presented is the combustion chamber and nozzle as a single component by using freeform integrated DED to build the nozzle directly onto the aft end of the chamber. The various aspects of the additive manufacturing processes and challenges, materials characterization and mechanical testing, and hot-fire testing of bimetallic components in a relevant rocket engine environment will be discussed.

Additive Manufacturing↗

New component development for multi-100 kW low-cost solar array applications

Studies of the cost and performance of flexible arrays have shown that the most dramatic reductions in the $/Watt figure of merit are achieved by increasing performance. An examination of those properties that contribute to array performance indicated areas where radical changes in current design practice and philosophy would result in significant cost and performance impacts. To take advantage of the predicted cost reductions, modules were fabricated and tested that had ultra-thin superstrates as a load carrying member and large area dielectric wraparound (DWA), gridded back surface and copper contacted solar cells.

Pack, G. J.↗

Design, process development, manufacture, test and evaluation of boron-aluminum for space shuttle components

A multi phase boron-aluminum design and evaluation program for space shuttle components was conducted, culminating in the fabrication of a 1.22 m (48 inch) x 1.83 m (72 inch) boron-aluminum compression panel capable of distributing a point load of 1555 kN (350,000 lbs) into a uniform running load at a temperature of 589 K (600 F). This panel was of the skin-stringer construction with two intermediate frame supports; seven unidirectional stringers varied in thickness from 5 plies to 52 plies and the skin was contoured to thicknesses ranging from 10 plies to 62 plies. Both the stringers and the skin incorporated Ti-6Al-4V titanium interleaves to increase bearing and in-plane shear strength. The discrete program phases were materials evaluation, design studies, process technology development, fabrication and assembly, and test and evaluation.

Garrett, R. A.↗