Search NASA⌕ Search

SEARCH · Search NASA

Results for “NITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Generation and Study of Am(IV) by Temperature-Controlled Electron Pulse Radiolysis

Used nuclear fuel (UNF) separation techniques that strive to separate radiotoxic americium (Am) from trivalent lanthanide fission products through oxidation state control have increased research efforts surrounding Am(V) and Am(VI). However, equivalent knowledge of the tetravalent state, Am(IV), has remained elusive, particularly in conditions more representative of UNF reprocessing, i.e., in concentrated nitric acid (HNO3). With this in mind, we have used electron pulse radiolysis to study the radiation-induced redox reaction of Am(III) with the oxidizing nitrate radical (NO3?) in 6 M HNO3: Am(III) + NO3? ? Am(IV) + NO3? . These experiments enabled us to observe the growth and decay of Am(IV) in a concentrated acidic solution for the first time. The transient Am(IV) species was found to have a lifetime of ~16 µs?sufficiently long-lived to play a critical mechanistic role in UNF reprocessing systems. Additionally, we performed the first-ever temperature-dependent kinetics study of an actinide element, elucidating unprecedented Arrhenius and Eyring activation parameters for the reaction of Am(III) with NO3?. This new knowledge provides much-needed molecular-level insights into the radiation-induced behavior of Am.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1986

Condensation of HNO3 and HCl in the winter polar stratospheres

Nitric acid and hydrochloric acid vapors may condense in the winter polar stratospheres. Nitric acid clouds, unlike water ice clouds, would form at the temperatures at which polar stratospheric clouds (PSCs) are observed and would have optical depths of the magnitude observed suggesting that HNO3 is a dominant component of PSCs. ClO, N2O5 and ClNO3 may react on cloud particle surfaces yielding additional HNO3, HCl, and HOCL. In the vicinity of PSCs these reactions could deplete the stratosphere of photochemically active NO(x) species. The sedimentation of PSCs may remove these materials from the stratosphere. The loss of vapor phase NO(x) might allow halogen-based chemistry to create the ozone hole.

Toon, Owen B.↗
NASA NTRS1988

Chemistry of chlorinated species in the Antarctic stratosphere

The chemistry of Cl sub 2 O sub 2, the chlorine monoxide dimer, has been further investigated in order to better asses its potential role in catalytic ozone destruction cycles. The dimer has been generated in a flow system, in the 200 to 250 K temperature range, by using ozone and chlorine atoms as ClO precursors. The Cl-atoms are produced by a microwave discharge of either Cl sub 2, or of F sub 2 with subsequent addition of HCl. With this later scheme the dimer can be generated in the absence of Cl sub 2. The Fourier transform infrared spectra of the products clearly indicates the presence of two isomers, in agreement with earlier results (J. Phys. Shen., 91, 433, 1987). None of the observed IR bands can be attributed to a ClO-OClO adduct, since they all appear in the absence of any detectable amount of OCl. It is likely that the particles in the polar stratospheric clouds will have a relatively dilute nitric acid outer layer, even if the core is the nitric acid monohydrate, since the particles are in equilibrium with the ambient water vapor, which is present at levels of a few parts per million.

Molina, Mario J.↗
NASA NTRS1994

Spectral signatures of polar stratospheric clouds and sulfate aerosol

Multiwavelength observations of Antarctic and midlatitude aerosol by the Cryogenic Limb Array Etalon Spectrometer (CLAES) experiment on the Upper Atmosphere Research Satellite (UARS) are used to demonstrate a technique that identifies the location of polar stratospheric clouds. The technique discussed uses the normalized area of the triangle formed by the aerosol extinctions at 925, 1257, and 1605/cm (10.8, 8.0, and 6.2 micrometers) to derive a spectral aerosol measure M of the aerosol spectrum. Mie calculations for spherical particles and T-matrix calculations for spheriodal particles are used to generate theoretical spectral extinction curves for sulfate and polar stratospheric cloud particles. The values of the spectral aerosol measure M for the sulfate and polar stratospheric cloud particles are shown to be different. Aerosol extinction data, corresponding to temperatures between 180 and 220 K at a pressure of 46 hPa (near 21-km altitude) for 18 August 1992, are used to demonstrate the technique. Thermodynamic calculations, based upon frost-point calculations and laboratory phase-equilibrium studies of nitric acid trihydrate, are used to predict the location of nitric acid trihydrate cloud particles.

Massie, S. T.↗
DOE OSTI2025

Adsorption and Chromatographic Behavior of Dispersed Sodium Bismuthate Systems for the Separation of Americium from Curium

The selective partitioning of americium (Am) and curium (Cm) is integral for nuclear science areas such as the nuclear fuel cycle, stockpile stewardship, and isotope production but remains a long-standing radioanalytical challenge due to nearly identical chemical properties. Differences in redox chemistry can be exploited since Am can be oxidized to the hexavalent oxidation state. Sodium bismuthate (NaBiO 3 ) exhibits favorable oxidation and ion exchange characteristics conducive to a rapid and efficient Am/Cm chromatographic separation. Contact of nitric acid with NaBiO 3 was shown to significantly decrease the nitric acid concentration and solution volume. The adsorption, kinetic, and chromatographic behavior of Am and Cm in systems that disperse NaBiO3 in filter aids was evaluated. Further, dispersion of NaBiO 3 increased separation factors to over 100, with rapid kinetics achieved within 1 min of contact and sustained for at least 2 h. The adsorption capacity was more than doubled from 0.066 mequiv g –1 for solid NaBiO 3 alone to 0.149(6) and 0.156(9) meq g –1 when dispersed in Celite 545 and silica gel, respectively. Complete separation was achieved in all systems with ~100% recovery in the respective eluted fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2016

Evaluating Secondary Inorganic Aerosols in Three Dimensions

The spatial distribution of aerosols and their chemical composition dictates whether aerosols have a cooling or a warming effect on the climate system. Hence, properly modeling the three-dimensional distribution of aerosols is a crucial step for coherent climate simulations. Since surface measurement networks only give 2-D data, and most satellites supply integrated column information, it is thus important to integrate aircraft measurements in climate model evaluations. In this study, the vertical distribution of secondary inorganic aerosol (i.e., sulfate, ammonium, and nitrate) is evaluated against a collection of 14 AMS flight campaigns and surface measurements from 2000 to 2010 in the USA and Europe. GISS ModelE2 is used with multiple aerosol microphysics (MATRIX, OMA) and thermodynamic (ISORROPIA II, EQSAM) configurations. Our results show that the MATRIX microphysical scheme improves the model performance for sulfate, but that there is a systematic underestimation of ammonium and nitrate over the USA and Europe in all model configurations. In terms of gaseous precursors, nitric acid concentrations are largely underestimated at the surface while overestimated in the higher levels of the model. Heterogeneous reactions on dust surfaces are an important sink for nitric acid, even high in the troposphere. At high altitudes, nitrate formation is calculated to be ammonia limited. The underestimation of ammonium and nitrate in polluted regions is most likely caused by a too simplified treatment of the NH3/NH4(+) partitioning which affects the HNO3/NO3(-) partitioning.

aerosols↗
NASA NTRS1999

Air Force F-16 Aircraft Engine Aerosol Emissions Under Cruise Altitude Conditions

Selected results from the June 1997 Third Subsonic Assessment Near-Field Interactions Flight (SNIF-III) Experiment are documented. The primary objectives of the SNIF-III experiment were to determine the partitioning and abundance of sulfur species and to examine the formation and growth of aerosol particles in the exhaust of F-16 aircraft as a function of atmospheric and aircraft operating conditions and fuel sulfur concentration. This information is, in turn, being used to address questions regarding the fate of aircraft fuel sulfur impurities and to evaluate the potential of their oxidation products to perturb aerosol concentrations and surface areas in the upper troposphere. SNIF-III included participation of the Vermont and New Jersey Air National Guard F-16's as source aircraft and the Wallops Flight Facility T-39 Sabreliner as the sampling platform. F-16's were chosen as a source aircraft because they are powered by the modern F-100 Series 220 engine which is projected to be representative of future commercial aircraft engine technology. The T-39 instrument suite included sensors for measuring volatile and non-volatile condensation nuclei (CN), aerosol size distributions over the range from 0.1 to 3.0 (micro)m, 3-D winds, temperature, dewpoint, carbon dioxide (CO2), sulfur dioxide (SO2), sulfuric acid (H2SO4), and nitric acid (HNO3).

Anderson, Bruce E.↗
NASA NTRSDate not supplied

Influences of Solar Irradiation and Aerosol Surface Area on Nitrous Acid Production in Western U.S. Wildfire Smoke

Biomass burning has been identified as a primary emission source for a host of gas and aerosol phase compounds which can damage environmental and human health. During FIREX-AQ collaborators from UNH, NASA Langley Aerosol Research Group Experiment (LARGE), and Brown University conducted measurements out of NASA Langley’s mobile laboratory during July and August of 2019. Nitrous acid (HONO) and nitric acid (HNO3) concentrations were measured at nominal 5-minute resolution using a dual mist chamber-ion chromatograph system resulting in approximately 1,200 total samples from five separate fires in the western US. Enhancement ratios between PM2.5 and carbon monoxide were used to discriminate between young and aged smoke plumes. Average HONO concentrations were significantly higher (P << 0.01) in young daytime compared to nighttime smoke while no statistical differences (P > 0.05) were observed between young and aged smoke during day or night. In daytime smoke from the Williams Flats fire (75 km SE of Spokane, WA on the Columbia River) UV-A irradiation was highly correlated with HONO to nitrogen dioxide (NO2) ratios; indicating that heterogenous NO2 to HONO conversion more than compensated for rapid photolytic loss of HONO. Black carbon (BC) may serve as a stable proxy for total available aerosol surface area in biomass burning plumes when total aerosol size distributions are unavailable. During the day HONO/NO2 is weakly correlated to BC when BC abundance exceeds 1 ug/m3 but at lower BC concentrations the relationship breaks down. At night this relationship was stronger, partly due to consistently high BC concentrations. These observations suggest that heterogenous conversion of NO2 to HONO on aerosol is a significant source of HONO in dense smoke plumes. In more diffuse smoke conversion on other surfaces (soil, foliage) becomes more important.

J. H. Kaspari↗
DOE OSTI2024

Decarbonizing nitrogen fertilizer production via the electrochemical nitrogen oxidation reaction

Nitric acid is an important commodity chemical with extensive applications in both agricultural and industrial sectors. However, current production methods involve a combination of the Haber–Bosch and Ostwald processes, which are both energy and carbon emission intensive. The electrochemical nitrogen oxidation reaction (NOR) to produce nitric acid or nitrates shows great potential as an environmentally friendly method for producing fertilizers under mild conditions. The key to progress in this field lies in understanding the fundamental mechanistic insights and establishing robust experimental methods, which is essential for the efficient design and synthesis of electrocatalysts for NOR. Additionally, poor gas mass transport in conventional electrochemical reactors at present lead to lower NOR activity, thereby limiting the progress in this field. In this work, we present a synergistic computational and experimental approach to map out the potential chemical and electrochemical steps and determine the energetics on PtO 2 catalyst to gain mechanistic insights into NOR. Here, this study marks the first attempt to perform NOR in a vapor-fed reactor designed using advanced (additive) manufacturing. The vapor-fed reactor significantly improved the N 2 mass transport to the catalyst, allowing us to report the highest rate for nitrate production to date at 3.3 μmol cm -2 h -1 at 2.01 V vs RHE.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1986

Studies on the oxidation of hexamethylbenzene 2: Preparation of dimethylpyromellitic acid

Hexamethylbenzene (HMB) was difficult to be oxidized with an alkaline potassium permanganate solution, since HMB was insoluble in an aqueous alkaline solution. But, when HMB was warmed with 50% nitric acid for a short time, and then treated with aqueous potassium permanganate, the reaction occurred readily and dimethylpyromellitic acid was obtained. When HMB was warmed with 50% nitric acid for 1 to 2 minutes, a yellow material was produced, which was soluble in hot aqueous potassium hydroxide, though free from carboxylic acids. It contained a little amount of bis-(nitromethyl)prehnitene and several unknown compounds. Further, the heat stability of polyimide prepared by the reaction of tetramethyldimethylpyromellitate with 4,4 prime-diaminodiphenylmethane turned out to be nearly equal to that of polyimide prepared from tetramethylpyromellitate.

Chiba, K.↗
NASA NTRS1979

Carbon fiber modification

The effect of several chemical treatments on the electrical and mechanical properties of carbon fibers was investigated with an optimum goal of increasing the electrical resistivity by a factor of 1000 without appreciably changing the mechanical properties. It was possible to effect resistivity increases from 10 to 50 percent without adversely affecting the tensile strength or Young's modulus for T-300 and C-6000 PAN fibers by treatments with either AlCl3 or nitric acid mixtures. Larger increases in the resistivity were produced with pitch fibers treated with nitric acid mixtures. This treatment also produced a partial decomposition of the pitch fiber and deterioration of the mechanical properties. The rationale behind the approch was to immobilize the conductivity producing pi electrons in the microscopic aromatic structure of the carbon fibers without destroying the strength producing sigma bonds. The investigations indicate that certain chemical treatments can produce such results, but the total reduction in the electrical conductivity which was achieved was not large enough to impact on problems which might arise from the high conductivities of the fibers.

Thompson, T. E.↗
DOE OSTI2026

Toward Rapid Actinium-225 Purification via Membrane Adsorbers with Covalently Tethered Diglycolamide Ligands

Extractive diglycolamide (DGA) resins are used in several state-of-the-art techniques for purifying 225 Ac, a promising radiometal for targeted alpha therapy. Unfortunately, separation processes that rely on resins are often limited to slow flow rates, high elution volumes, and long processing times. Membrane adsorbers functionalized with DGA ligands are an alternative separation material that may overcome these challenges. This work presents (1) the synthesis of an aminated tetrahexyldiglycolamide ligand, (2) the covalent tethering of the ligand to electrospun poly(vinylbenzyl chloride) fiber mats, and (3) the adsorption and desorption of La(III) and 225 Ac. Chemical and physical characterization supports the covalent tethering of the ligand to the fiber mat, as well as the preservation of the fiber surface area and porosity after functionalization. Equilibrium adsorption experiments were performed with stable La(III) and radioactive 225 Ac. Trends in affinity are consistent between commercial resins and the synthesized membrane adsorbers; however, the Langmuir constants and the maximum binding capacity of the membrane adsorbers were generally lower than the resins. Despite these differences, the modeled selectivity for an equimolar solution of La(III)/ 225 Ac in 10 M nitric acid is 57. Furthermore, 225 Ac is rapidly desorbed from the fibers in 10 M nitric acid (<20 min). The La(III)/ 225 Ac selectivity and rapid 225 Ac desorption indicate this class of materials is promising for rapid radioanalytical separations.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1972

Infrared laboratory studies of synthetic planetary atmospheres

The initial stages of the research were involved with a test of Burch's law of multiplicative transmittance for mixed absorbing gases when their lines are broadened by H2 and He, which are constituents of the atmospheres of the major planets. The broadening of individual lines in the CO fundamental by various gases was investigated. Line strength and half-width for individual CO lines were studied as a function of temperature. Measurements of total band absorptance as a function of absorber thickness and total effective pressure were made at various temperatures for bands of CO and N2O. Attempts were made to develop a phenomenological theory of line broadening that would account for the phenomena observed for the CO fundamental and those reported for more highly polar gases. Laboratory measurements of nitric acid vapor absorptance were compared with balloon measurements in arriving at an estimate of the quantity of nitric acid vapor present in the earth's atmosphere in the region of the ozone layer.

Williams, D.↗
NASA NTRS1995

Kinetics of the Formation of Intercalation Compounds in Crystalline Graphite

Crystalline graphite has a structure that can be best described as an ordered stack of flat aromatic layers. It is known to form intercalation compounds with bromine and nitric acid. Their formation was studied using thermal measurements and analytical techniques. Samples of graphite treated with either bromine or nitric acid were prepared by contacting these reagents with powdered graphite.

crystalline graphite intercalation compounds kinet↗
NASA NTRS2004

Investigation of Polar Stratospheric Cloud Solid Particle Formation Mechanisms Using ILAS and AVHRR Observations in the Arctic

Satellite observations of denitrification and ice clouds in the Arctic lower stratosphere in February 1997 are used with Lagrangian microphysical box model calculations to evaluate nucleation mechanisms of solid polar stratospheric cloud (PSC) particles. The occurrences of ice clouds are not correlated in time and space with the locations of back trajectories of denitrified air masses, indicating that ice particle surfaces are not always a prerequisite for the formation of solid PSCs that lead to denitrification. In contrast, the model calculations incorporating a pseudoheterogeneous freezing process occurring at the vapor-liquid interface can quantitatively explain most of the observed denitrification when the nucleation activation free energy for nitric acid dihydrate formation is raised by only approx.10% relative to the current published values. Once nucleated, the conversion of nitric acid dihydrate to the stable trihydrate phase brings the computed levels of denitrification closer to the measurements. INDEX TERMS: 0305 Atmospheric Composition and Structure: Aerosols and particles (0345, 4801); 0320 Atmospheric Composition and Sb~lctureC: loud physics and chemistry; 0340 Atmospheric Composition and Structure: Middle atmosphere-composition and chemistry

Irie, H.↗
DOE OSTI2024

Adsorption of terbium (III) on DGA and LN resins: Thermodynamics, isotherms, and kinetics

Two commercially available extraction chromatography (EXC) resins containing N,N,N’,N’-tetra-n-octyldiglycolamide (DGA Resin, Normal, 50 – 100 μm) and Bis(2-ethylhexyl) phosphate (LN Resin, 100 – 150 μm) were used as adsorbents to study fundamental adsorption properties such as thermodynamic values, equilibrium isotherms, and kinetic uptake models for terbium(III) adsorption. Weight distribution ratios (D w ) for terbium on DGA and LN resins were measured using a [ 160 Tb]Tb 3+ radiometric tracer in nitric acid as a function of acidity, temperature, initial analyte concentration, and equilibrium time. The D w values showed increasing binding affinity for DGA resin at high nitric acid concentrations and decreasing binding affinity for LN resins. Thermodynamic studies for DGA and LN resins revealed that the Gibbs free energy (ΔG) increased consistently with temperature. To model equilibrium data, increasingly higher parameter equilibrium isotherm models (Henry (1) < Langmuir, Freundlich (2) < Redlich-Peterson (3) < Fritz-Schluender (4)) were compared on their root mean squared errors (RMSE) and adjusted determination coefficients to determine the most applicable model. In all cases, the empirical four-parameter Fritz-Schluender isotherm demonstrated a superior fit. Similar comparisons for reaction-based kinetic models (Pseudo-first-order < Pseudo-second-order < Pseudo-n-order) revealed that the higher-order PNO model yielded a superior fit of kinetic data for both resins. Furthermore, in some cases, adsorption isotherms and kinetic models could also be modeled by a lower-order model with minimal change in error parameters. Weber-Morris plots revealed that two linear sections are observed for each resin, where the first linear segment is attributed to fast (film diffusion) adsorption of terbium, followed by slower intraparticle diffusion of terbium through the pores as the rate-limiting step. Based on the Weber-Morris plot, both film and intraparticle diffusion are involved in controlling the kinetic rate of adsorption for DGA and LN resins.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Chemical Composition and Mixing State of Wintertime Aerosol from the European Arctic Site of Ny-Ålesund, Svalbard

The Arctic is rapidly warming, and aerosols play an increasingly important role by scattering and absorbing sunlight and by participating in cloud formation. Their optical and cloud-forming properties depend on the mixing state and chemical composition, but observations of these features remain limited. This study comprehensively characterizes 25,254 individual particles collected at Ny-Ålesund, Svalbard (November −December 2020), using microspectroscopy techniques to investigate their size, morphology, mixing state, and chemical composition. Fresh sea salt aerosols (SSA) were identified as the most abundant (∼85%), of the total observed aerosol population, with potential sources from sea spray and blowing snow. Air masses originating from the Arctic Ocean surrounding Svalbard likely contribute to increased concentrations of sub-micrometer “Fresh SSA” particles. “Aged SSA” particles (7.4%) are enriched in sulfur and nitrogen, compared to “Fresh SSA”. These elevated ratios may result from various atmospheric aging processes including the uptake of sulfuric and nitric acids. Here, our results suggest that aged SSA, with sizes larger than 300 nm, likely underwent chlorine depletion by sulfuric and nitric acids during transport. Additionally, elemental analysis reveals that both fresh and aged SSA can mix with dust particles, regardless of the SSA size (49.9% in sub-micrometer size and 50.1% in super-micrometer size, respectively). Dust particles are efficient ice-nucleating particles (INPs), and SSA is known to act as cloud condensation nuclei (CCN), and therefore, their mixtures may inherit both properties. The non-negligible number (4.4%) of SSA-dust mixtures underscores the importance of these particles as potential sources of CCN and INP in the Arctic atmosphere.

Arctic↗
NASA NTRS1997

New Polymer Coatings for Chemically Selective Mass Sensors

There is a current need to develop sensitive and chemically specific sensors for the detection of nitric acid for in-situ measurements in the atmosphere. Polymer coatings have been synthesized and tested for their sensitivity and selectivity to nitric acid. A primary requirement for these polymers is detectability down to the parts per trillion range. The results of studies using these polymers as coatings for quartz crystal microbalances (QCM) and surface acoustic wave (SAW) devices will be presented.

Sims, S. C.↗