Search NASA⌕ Search

SEARCH · Search NASA

Results for “Network generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Mission Operations Centers (MOCs): Integrating key spacecraft ground data system components

In an environment characterized by decreasing budgets, limited system development time, and user needs for increased capabilities, the Mission Operations Division (MOD) at the National Aeronautics and Space Administration Goddard Space Flight Center initiated a new, cost-effective concept in developing its spacecraft ground data systems: the Mission Operations Center (MOC). In the MOC approach, key components are integrated into a comprehensive and cohesive spacecraft planning, monitoring, command, and control system with a single, state-of-the-art graphical user interface. The MOD is currently implementing MOC's, which feature a common, reusable, and extendable system architecture, to support the X-Ray Timing Explorer (XTE), Tropical Rainfall Measuring Mission (TRMM), and Advanced Composition Explorer (ACE) missions. As a result of the MOC approach, mission operations are integrated, and users can, with a single system, perform real-time health and safety monitoring, real-time command and control, real-time attitude processing, real-time and predictive graphical spacecraft monitoring, trend analysis, mission planning and scheduling, command generation and management, network scheduling, guide star selection, and (using an expert system) spacecraft monitoring and fault isolation. The MOD is also implementing its test and training simulators under the new MOC management structure. This paper describes the MOC concept, the management approaches used in developing MOC systems, the technologies employed and the development process improvement initiatives applied in implementing MOC systems, and the expected benefits to both the user and the mission project in using the MOC approach.

Harbaugh, Randy↗
NASA NTRS1995

Gamma Ray Burst Optical Counterpart Search Experiment (GROCSE)

GROCSE (Gamma-Ray Optical Counterpart Search Experiments) is a system of automated telescopes that search for simultaneous optical activity associated with gamma ray bursts in response to real-time burst notifications provided by the BATSE/BACODINE network. The first generation system, GROCSE 1, is sensitive down to Mv (approximately) 8.5 and requires an average of 12 seconds to obtain the first images of the gamma ray burst error box defined by the BACODINE trigger. The collaboration is now constructing a second generation system which has a 4 second slewing time and can reach Mv (approximately) 14 with a 5 second exposure. GROCSE 2 consists of 4 cameras on a single mount. Each camera views the night sky through a commercial Canon lens (f/1.8, focal length 200 mm) and utilizes a 2K x 2K Loral CCD. Light weight and low noise custom readout electronics were designed and fabricated for these CCDs. The total field of view of the 4 cameras is 17.6 x 17.6 (degree). GROCSE 2 will be operated by the end of 1995. In this paper, the authors present an overview of the GROCSE system and the results of measurements with a GROCSE 2 prototype unit.

Park, H. S.↗
NASA NTRS2000

Reliability Constrained Priority Load Shedding for Aerospace Power System Automation

The need for improving load shedding on board the space station is one of the goals of aerospace power system automation. To accelerate the optimum load-shedding functions, several constraints must be involved. These constraints include congestion margin determined by weighted probability contingency, component/system reliability index, generation rescheduling. The impact of different faults and indices for computing reliability were defined before optimization. The optimum load schedule is done based on priority, value and location of loads. An optimization strategy capable of handling discrete decision making, such as Everett optimization, is proposed. We extended Everett method to handle expected congestion margin and reliability index as constraints. To make it effective for real time load dispatch process, a rule-based scheme is presented in the optimization method. It assists in selecting which feeder load to be shed, the location of the load, the value, priority of the load and cost benefit analysis of the load profile is included in the scheme. The scheme is tested using a benchmark NASA system consisting of generators, loads and network.

Momoh, James A.↗
NASA NTRS2000

MU-SPIN Update

Current goals are to: (1) Strengthen the science and engineering capabilities of MU-SPIN institutions in research and education via computer networks; (2) Involve and prepare minority institutions and principal investigators to successfully participate in competitive research and education processes via computer networks; and (3) Develop training and education mechanisms to support, sustain and evolve the institutional network infrastructure, thereby generating a better, prepared pool of candidates to contribute to NASA's missions.

Harrington, James, Jr.↗
NASA NTRS2002

New Results from Space and Field Observations on the Aerosol Direct and Indirect Radiative Forcing

New space observations from the MODIS instrument on board the Terra satellite and analysis of POLDER data flown on the ADEOS satellite, show in great details the spatial and seasonal variability of the global aerosol system. These spaceborne instruments distinguish fine aerosol from man-made regional pollution and biomass burning from mostly natural coarse dust and sea salt aerosol. E.g. fine regional pollution in and around the Indian sub-continent, Europe and North America; smoke from biomass burning in Southern Africa and Southern America; coarse dust from West Africa and mixed dust pollution and smoke from West and central Africa and East Asia. These regions were also studied extensively in focused field experiments and by the distributed AERONET network. The results generate the first climatologies of the aerosol system, are used to derive the aerosol radiative effects and to estimate the anthropogenic component. The measurements are also used to evaluate each other and constrain aerosol transport models.

Kaufman, Yoram J.↗
NASA NTRS2003

The Global Aerosol System and its Direct Forcing of Climate: Results From MODIS, AERONET and GOCART

Space observations from the MODIS instrument on board the Terra satellite, show in great details the spatial and seasonal variability of the global aerosol system. These spaceborne instruments distinguish fine aerosol from man-made regional pollution and biomass burning from mostly natural coarse dust and sea salt aerosol. E.g. fine regional pollution in and around the Indian sub-continent, Europe and North America; smoke from biomass burning in Southern Africa and Southern America; coarse dust from West Africa and mixed dust pollution and smoke from West and central Africa and East Asia. These regions were also studied extensively in focused field experiments and by the distributed AERONET network. The results generate the first climatology of the aerosol system, are used to derive the aerosol radiative effects and to estimate the anthropogenic component. The measurements are also used to evaluate each other and constrain aerosol transport models.

Kaufman, Y. J.↗
NASA NTRS2007

Unofficial Road Building in the Brazilian Amazon: Dilemmas and Models for Road Governance

Unofficial roads form dense networks in landscapes, generating a litany of negative ecological outcomes, but unofficial roads in frontier areas are also instrumental in local livelihoods and community development. This trade-off poses dilemmas for the governance of unofficial roads. Unofficial road building in frontier areas of the Brazilian Amazon illustrates the challenges of 'road governance.' Both state-based and community based governance models exhibit important liabilities for governing unofficial roads. Whereas state-based governance has experienced difficulties in adapting to specific local contexts and interacting effectively with local interest groups, community-based governance has a mixed record owing to social inequalities and conflicts among local interest groups. A state-community hybrid model may offer more effective governance of unofficial road building by combining the oversight capacity of the state with locally grounded community management via participatory decision-making.

Perz, Stephen G.↗
NASA NTRS2008

Bonding by Hydroxide-Catalyzed Hydration and Dehydration

A simple, inexpensive method for bonding solid objects exploits hydroxide-catalyzed hydration and dehydration to form silicate-like networks in thin surface and interfacial layers between the objects. The method can be practiced at room temperature or over a wide range of temperatures. The method was developed especially to enable the formation of precise, reliable bonds between precise optical components. The bonds thus formed exhibit the precision and transparency of bonds formed by the conventional optical-contact method and the strength and reliability of high-temperature frit bonds. The method also lends itself to numerous non-optical applications in which there are requirements for precise bonds and/or requirements for bonds, whether precise or imprecise, that can reliably withstand severe environmental conditions. Categories of such non-optical applications include forming composite materials, coating substrates, forming laminate structures, and preparing objects of defined geometry and composition. The method is applicable to materials that either (1) can form silicate-like networks in the sense that they have silicate-like molecular structures that are extensible into silicate-like networks or (2) can be chemically linked to silicate-like networks by means of hydroxide-catalyzed hydration and dehydration. When hydrated, a material of either type features surface hydroxyl (-OH) groups. In this method, a silicate-like network that bonds two substrates can be formed either by a bonding material alone or by the bonding material together with material from either or both of the substrates. Typically, an aqueous hydroxide bonding solution is dispensed and allowed to flow between the mating surfaces by capillary action. If the surface figures of the substrates do not match precisely, bonding could be improved by including a filling material in the bonding solution. Preferably, the filling material should include at least one ingredient that can be hydrated to have exposed hydroxyl groups and that can be chemically linked, by hydroxide catalysis, to a silicate-like network. The silicate-like network could be generated in situ from the filling material and/or substrate material, or could be originally present in the bonding material.

Gwo, Dz-Hung↗
NASA NTRS2008

JPL Fault Protection Experiences - Case Studies

This slide presentation shows several case studies for fault protection. The cases involve a discovery-class mission to excavate material from a comet, rendezvous with two asteroids and develop a prototype system for a next-generation Deep Space Network consisting of ndca large array of small antennas.

fault protection↗
NASA NTRS2010

Directivity of a Sparse Array in the Presence of Atmospheric-Induced Phase Fluctuations for Deep Space Communications

Widely distributed (sparse) ground-based arrays have been utilized for decades in the radio science community for imaging celestial objects, but have only recently become an option for deep space communications applications with the advent of the proposed Next Generation Deep Space Network (DSN) array. But whereas in astronomical imaging, observations (receive-mode only) are made on the order of minutes to hours and atmospheric-induced aberrations can be mostly corrected for in post-processing, communications applications require transmit capabilities and real-time corrections over time scales as short as fractions of a second. This presents an unavoidable problem with the use of sparse arrays for deep space communications at Ka-band which has yet to be successfully resolved, particularly for uplink arraying. In this paper, an analysis of the performance of a sparse antenna array, in terms of its directivity, is performed to derive a closed form solution to the expected array loss in the presence of atmospheric-induced phase fluctuations. The theoretical derivation for array directivity degradation is validated with interferometric measurements for a two-element array taken at Goldstone, California. With the validity of the model established, an arbitrary 27-element array geometry is defined at Goldstone, California, to ascertain its performance in the presence of phase fluctuations. It is concluded that a combination of compact array geometry and atmospheric compensation is necessary to ensure high levels of availability.

Nessel, James A.↗
NASA NTRS2013

Lessons Learned During Instrument Testing for the Thermal Infrared Sensor (TIRS)

The Themal InfraRed Sensor (TIRS) instrument, set to launch on the Landsat Data Continuity Mission in 2013, features a passively cooled telescope and IR detectors which are actively cooled by a two stage cryocooler. In order to proceed to the instrument level test campaign, at least one full functional test was required, necessitating a thermal vacuum test to sufficiently cool the detectors and demonstrate performance. This was fairly unique in that this test occurred before the Pre Environmental Review, but yielded significant knowledge gains before the planned instrument level test. During the pre-PER test, numerous discrepancies were found between the model and the actual hardware, which were revealed by poor correlation between model predictions and test data. With the inclusion of pseudo-balance points, the test also provided an opportunity to perform a pre-correlation to test data prior to the instrument level test campaign. Various lessons were learned during this test related to modeling and design of both the flight hardware and the Ground Support Equipment and test setup. The lessons learned in the pre-PER test resulted in a better test setup for the nstrument level test and the completion of the final instrument model correlation in a shorter period of time. Upon completion of the correlation, the flight predictions were generated including the full suite of off-nominal cases, including some new cases defined by the spacecraft. For some of these ·new cases, some components now revealed limit exceedances, in particular for a portion of the hardware that could not be tested due to its size and chamber limitations.. Further lessons were learned during the completion of flight predictions. With a correlated detalled instrument model, significant efforts were made to generate a reduced model suitable for observatory level analyses. This proved a major effort both to generate an appropriate network as well as to convert to the final model to the required format and yielded additional lessons learned. In spite of all the challenges encountered by TIRS, the instrument was successfully delivered to the spacecraft and will soon be tested at observatory level in preparation for a successful mission launch.

Peabody, Hume L.↗
NASA NTRS2015

A WRF-Chem Analysis of Flash Rates, Lightning-NOx Production and Subsequent Trace Gas Chemistry of the 29-30 May 2012 Convective Event in Oklahoma During DC3

The Deep Convective Clouds and Chemistry (DC3) field campaign in 2012 provided a plethora of aircraft and ground-based observations (e.g., trace gases, lightning and radar) to study deep convective storms, their convective transport of trace gases, and associated lightning occurrence and production of nitrogen oxides (NOx). This is a continuation of previous work, which compared lightning observations (Oklahoma Lightning Mapping Array and National Lightning Detection Network) with flashes generated by various flash rate parameterization schemes (FRPSs) from the literature in a Weather Research and Forecasting Chemistry (WRF-Chem) model simulation of the 29-30 May 2012 Oklahoma thunderstorm. Based on the Oklahoma radar observations and Lightning Mapping Array data, new FRPSs are being generated and incorporated into the model. The focus of this analysis is on estimating the amount of lightning-generated nitrogen oxides (LNOx) produced per flash in this storm through a series of model simulations using different production per flash assumptions and comparisons with DC3 aircraft anvil observations. The result of this analysis will be compared with previously studied mid-latitude storms. Additional model simulations are conducted to investigate the upper troposphere transport, distribution, and chemistry of the LNOx plume during the 24 hours following the convective event to investigate ozone production. These model-simulated mixing ratios are compared against the aircraft observations made on 30 May over the southern Appalachians.

Cummings, Kristin A.↗
NASA NTRS2017

Preliminary Results from a Model-Driven Architecture Methodology for Development of an Event-Driven Space Communications Service Concept

NASA's next generation space communications network will involve dynamic and autonomous services analogous to services provided by current terrestrial wireless networks. This architecture concept, known as the Space Mobile Network (SMN), is enabled by several technologies now in development. A pillar of the SMN architecture is the establishment and utilization of a continuous bidirectional control plane space link channel and a new User Initiated Service (UIS) protocol to enable more dynamic and autonomous mission operations concepts, reduced user space communications planning burden, and more efficient and effective provider network resource utilization. This paper provides preliminary results from the application of model driven architecture methodology to develop UIS. Such an approach is necessary to ensure systematic investigation of several open questions concerning the efficiency, robustness, interoperability, scalability and security of the control plane space link and UIS protocol.

Roberts, Christopher J.↗
NASA NTRSDate not supplied

Mineralogical Signatures of Mars-Analog Eskers in Iceland

Orbital geomorphic observations of the martian surface suggest glaciers were present during much of Mars’ history. Amazonian- and Hesperian-aged lobate and viscous flow features and moraines, some of which retain remnant ice deposits, are typically interpreted as evidence for cold-based glaciation. There is some morphological evidence for wet-based glaciation, however, and the Late Noachian Icy Highlands model, in which melting of glaciers is hypothesized to create valley networks, would have generated features characteristic of wet-based glaciers, like eskers. Furthermore, recent work suggests lower gravity on Mars promoted subglacial water drainage, leading to channels and eskers. There is a paucity of morphological and compositional measurements of subglacial landforms on Earth to provide comparison to putative subglacial features on the martian surface, like eskers. Our group is studying the morphology, sedimentology, and composition of eskers formed in Iceland to identify characteristics of these features that will help determine whether sinuous ridges on Mars are ancient eskers. Here, we report on the mineralogy of eskers that were sampled during our summer 2022 field campaign and evaluate whether there is a mineralogical signature of eskers that is distinct from surrounding glacial outwash plains

E B Rampe↗
NASA NTRSDate not supplied

The TOLNet 2.0 Website: How an API Can Promote Open Science and FAIR Principles

The Tropospheric Ozone Lidar Network (TOLNet) has generated over a decade of ozone vertical profile data products over North America. The science value of the TOLNet data has been demonstrated in numerous peer-reviewed publications on air quality and other ozone relevant research. To support the broad spectrum of data use, the TOLNet team launched a major effort to upgrade the web-based data repository aiming to enhance the data discoverability and to enable machine-to-machine data upload and download processes. Specifically, the TOLNet website included an application programming interface (API), which supports machine-to-machine data search and data download. The API also extracts selected variables from the files, which can be retrieved as JSON objects and used to create data displays without having to download or open the underlying files. The TOLNet science team members can also use the API for automated data upload, including a data file scanning feature to ensure data product integrity. To be presented will include a summary of key features of data repositories, an actual use case of machine-to-machine data access/use, as well as our journey to make TOLNet data more FAIR, i.e., more findable, accessible, interoperable, and (re)usable.

Crystal Gummo↗
NASA NTRSDate not supplied

TOLNet’s FAIR Journey: Yesterday, Today, and Tomorrow

The Tropospheric Ozone Lidar Network (TOLNet) has generated over a decade of ozone vertical profile data products over North America and contributed to several air quality focused field studies. The science value of the TOLNet data has been demonstrated in numerous peer-reviewed publications on air quality and ozone relevant research. As the broad scientific community has moved towards adopting FAIR Principles to make data more findable, accessible, interoperable, and (re)usable, the TOLNet team has been consistently making data more FAIR. This effort has many challenges, partially reflecting on the FAIR principles being domain agnostic while the implementation needs to be domain specific. The FAIR principles declare the dependence on the community standards, domain-relevant metadata, and rich metadata. This presentation uses the TOLNet data and data system as an example to explore the best practices to implement FAIR principle. Particularly, we will examine the metadata and the “richness” to support findability and usability as well as machine-to-machine actionability via API. Last year, as part of our FAIR journey, we launched the TOLNet website (https://tolnet.larc.nasa.gov/) and the API (https://tolnet.larc.nasa.gov/api/). Part of this process included extracting and cataloging metadata across the entire TOLNet mission timeframe. This enabled users to search through the mission by various metadata criteria, improving the findability and accessibility. And computers could connect directly to the TOLNet API to extract both metadata and data, providing a level of interoperability never present before for TOLNet data. On top of that, all new TOLNet data is now automatically validated using the API to ensure it complies with GEOMS standards, aiding in reusability. It takes both technology and scientists working together to make progress. The next step is to evaluate the current TOLNet offerings against NASA’s Practical Guide for Open, Free & FAIR NASA Earth Science Data Products (https://doi.org/10.5067/DOC/ESCO/ESDSWG-0002V1).

TOLNet↗
NASA NTRS2014

Diagenetic Features in Yellowknife Bay, Gale Crater, Mars: Implications for Substrate Rheology and Potential Gas Release

Multiple diagenetic features have been observed in clay­-bearing mudstone exposed within Yellowknife Bay, Gale Crater, Mars. These features occurred during at least two separate episodes: an early generation of spheroidal concretions that co-­occur with a dense networks of mineralized fractures, and a later generation of mineralized veins. Concretions consist of mm-sized spheroids (0.4 to 8.0 mm, mean diameter of 1.2 mm) that are distinctly more resistant than the encompassing mudstone. Dissected spheroids suggest an origin via compaction and incipient lithification of the substrate at the perimeter of syndepositional void space. Concretions are generally patchy in their distribution within clay-‐bearing mudstone, but in places can be the dominant fabric element. Locally dense networks of mineralized fractures occur in regions of low concretion abundance. These consist of short (< 50 cm), curvilinear to planar mineralized voids that occur across a range of orientations from vertical to subhorizontal. Fractures are filled by multi-phase cement consisting of two isopachous, erosionally resistant outer bands, and a central less resistant fill. Physical relationships suggests that original fractures may have formed as both interconnected voids and as discrete cross--cutting features. Co--occurrence of early diagenetic concretions and fracture networks suggests a common origin via gas release within a subaqueous, shallow substrate. We suggest that gas release within weakly cohesive subsurface sediments resulted in substrate dewatering and an increase in the cohesive strength of the substrate. Local differences in substrate strength and rate of gas production would have result in formation of either discrete voids or fracture networks. A second generation of mineralized veins is characterized by a regionally low spatial density, predominantly vertical or horizontal orientations, and a single phase of Ca-‐sulfate mineral fill. These veins cross-cut the early diagenetic elements and intersect a greater thickness of stratigraphy within Yellowknife Bay, suggesting a later-‐diagenetic origin via hydraulic fracturing.

Kah, L. C.↗