Search NASA⌕ Search

SEARCH · Search NASA

Results for “Noise Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A model for the noise radiated by turbulent boundary layers and its interaction with laminar layers in supersonic flow

Motivated by the noise-boundary layer transition problem in supersonic flow, the interaction between incoming aerodynamic noise and the laminar boundary layer has been studied. The noise field has been modeled as a Mach wave radiation field consisting of discrete waves emanating from coherent turbulent entities moving downstream within the supersonic turbulent boundary layer. The individual disturbances are likened to miniature sonic booms and the laminar boundary layer is strafed by the waves as the sources move downstream. The mean, autocorrelation, and power spectral density of the field are expressed in terms of the wave shapes and their average arrival rates. The emphasis in the interaction analysis is on the behavior of the shocklets in the noise field. The shocklets are shown to be focused by the laminar boundary layer in its outer region. Borrowing wave-propagation terminology, this region is termed the caustic region. Using scaling laws from sonic boom work, focus factors at the caustic are estimated to vary from 2 to 6 for incoming shocklet strengths of 1 to .01 percent of the free stream pressure level.

Schopper, M. R.↗
NASA NTRS2008

Low Frequency Noise Contamination in Fan Model Testing

Aircraft engine noise research and development depends on the ability to study and predict the noise created by each engine component in isolation. The presence of a downstream pylon for a model fan test, however, may result in noise contamination through pylon interactions with the free stream and model exhaust airflows. Additionally, there is the problem of separating the fan and jet noise components generated by the model fan. A methodology was therefore developed to improve the data quality for the 9 15 Low Speed Wind Tunnel (LSWT) at the NASA Glenn Research Center that identifies three noise sources: fan noise, jet noise, and rig noise. The jet noise and rig noise were then measured by mounting a scale model of the 9 15 LSWT model fan installation in a jet rig to simulate everything except the rotating machinery and in duct components of fan noise. The data showed that the spectra measured in the LSWT has a strong rig noise component at frequencies as high as 3 kHz depending on the fan and airflow fan exit velocity. The jet noise was determined to be significantly lower than the rig noise (i.e., noise generated by flow interaction with the downstream support pylon). A mathematical model for the rig noise was then developed using a multi-dimensional least squares fit to the rig noise data. This allows the rig noise to be subtracted or removed, depending on the amplitude of the rig noise relative to the fan noise, at any given frequency, observer angle, or nozzle pressure ratio. The impact of isolating the fan noise with this method on spectra, overall power level (OAPWL), and Effective Perceived Noise Level (EPNL) is studied.

Brown, Clifford A.↗
NASA NTRS1994

A mathematical model for simulating noise suppression of lined ejectors

A mathematical model containing the essential features embodied in the noise suppression of lined ejectors is presented. Although some simplification of the physics is necessary to render the model mathematically tractable, the current model is the most versatile and technologically advanced at the current time. A system of linearized equations and the boundary conditions governing the sound field are derived starting from the equations of fluid dynamics. A nonreflecting boundary condition is developed. In view of the complex nature of the equations, a parametric study requires the use of numerical techniques and modern computers. A finite element algorithm that solves the differential equations coupled with the boundary condition is then introduced. The numerical method results in a matrix equation with several hundred thousand degrees of freedom that is solved efficiently on a supercomputer. The model is validated by comparing results either with exact solutions or with approximate solutions from other works. In each case, excellent correlations are obtained. The usefulness of the model as an optimization tool and the importance of variable impedance liners as a mechanism for achieving broadband suppression within a lined ejector are demonstrated.

Watson, Willie R.↗
NASA NTRS1982

Optical communications research to demonstrate 2.5 bits/detected photon

The transmission of information by optical signals over a space channel with a power efficiency of 2.5 bits/detected photon markedly increases the amount of information that can be transmitted to satellites. An account is given of the research program at the Jet Propulsion Laboratory that is attempting to demonstrate that optical signals can be used to transmit information over a space channel with this power efficiency. It is noted, however, that the ability to attain 2.5 bits/detected photon (or higher) depends heavily on the validity of the mathematical models used in the performance analysis. Therefore, verification of the channel dark current noise models is a crucial first step. Another prerequisite is a high-brightness, single-spatial mode laser emitter. It is believed that single spatial model devices with power outputs of about 1W can be achieved by coherently combining a number of GaAs lasers in what effectively amounts to a phased array.

Lesh, J. R.↗
NASA NTRS2016

AIRNOISE: A Tool for Preliminary Noise-Abatement Terminal Approach Route Design

Noise from aircraft in the airport vicinity is one of the leading aviation-induced environmental issues. The FAA developed the Integrated Noise Model (INM) and its replacement Aviation Environmental Design Tool (AEDT) software to assess noise impact resulting from all aviation activities. However, a software tool is needed that is simple to use for terminal route modification, quick and reasonably accurate for preliminary noise impact evaluation and flexible to be used for iterative design of optimal noise-abatement terminal routes. In this paper, we extend our previous work on developing a noise-abatement terminal approach route design tool, named AIRNOISE, to satisfy this criterion. First, software efficiency has been significantly increased by over tenfold using the C programming language instead of MATLAB. Moreover, a state-of-the-art high performance GPU-accelerated computing module is implemented that was tested to be hundreds time faster than the C implementation. Secondly, a Graphical User Interface (GUI) was developed allowing users to import current terminal approach routes and modify the routes interactively to design new terminal approach routes. The corresponding noise impacts are then calculated and displayed in the GUI in seconds. Finally, AIRNOISE was applied to Baltimore-Washington International Airport terminal approach route to demonstrate its usage.

aircraft noise↗
NASA NTRS1977

Airframe noise of component interactions on a large transport model

Airframe noise produced by aircraft components and their interactions on a model of a wide body transport was investigated in an open jet anechoic flow facility. The two-meter span model had leading edge and multigapped trailing edge flaps, undercarriage, and associated stowage compartments. Each of these components were extended and retracted so their individual and interactive contributions to the measured airframe noise could be determined. An analysis of variance was performed which revealed a statistical significance of the component interactions. Various airframe noise reduction techniques were tried to reduce airframe noise. The effects of these techniques on the model's lift and drag were also measured.

Shearin, J. G.↗
NASA NTRS1982

Analyzing the Broken Ridge area of the Indian Ocean using magnetic and gravity anomaly maps and geoid undulation and bathymetry data

A higher resolution anomaly map of the Broken Ridge area (2 degree dipole spacing) was produced and reduced to the pole using quiet time data for this area. The map was compared with equally scaled maps of gravity anomaly, geoid undulation, and bathymetry. The ESMAP results were compared with a NASA MAGSAT map derived by averaging data in two-degree bins. A survey simulation was developed to model the accuracy of MAGSAT anomaly maps as a function of satellite altitude, instrument noise level, external noise model, and crustal anomaly field model. A preliminary analysis of the geophysical structure of Broken Ridge is presented and unresolved questions are listed.

Lazarewicz, A. R.↗
NASA NTRS1994

Model ducted propulsor noise characteristics at takeoff conditions

A model Advanced Ducted Propulsor (ADP) was tested in the NASA Lewis Low-Speed Anechoic Wind Tunnel at a simulated takeoff velocity of Mach 0.2. The model was designed and manufactured by Pratt & Whitney. The 16-blade rotor ADP was tested with 22- and 40-vane stators to achieve cut-on and cut-off criterion with respect to propagation of the fundamental rotor-stator interaction tone. Additional test parameters included three inlet lengths, three nozzle sizes, two spinner configurations, and two rotor rub strip configurations. The model was tested over a range of rotor blade setting angles and inlet angles of attack. Acoustic data were taken with a sideline translating microphone probe and with a unique inlet microphone probe that identified inlet rotating acoustic modes. The beneficial acoustic effects of cut-off were clearly demonstrated. A 10-dB fundamental tone reduction was associated with the long inlet and 40-vane stator. The fundamental tone level was essentially unaffected by inlet angle of attack at rotor speeds of above 96% design.

TRT-EXPERIMENTAL↗
NASA NTRS1993

Simulated orbiter lift-off acceleration - A stochastic model

A simple procedure for generating synthetic orbiter liftoff acceleration is described. This stochastic method is based on a filtered white noise model which accounts for the nonstationary time evolution of amplitude and frequency content of orbiter lift-off accelerations. The example of Space Transportation System STS-41 Z-acceleration is carefully examined, and the corresponding synthetic orbiter lift-off accelerations model was developed. It is shown that the resulting simulated accelerations preserve significant properties of the original record. Statistically based acceleration response spectra curves for the simulated orbiter lift-off excitations are also evaluated and the results are compared with those for the actual flight data.

Lee-Glauser, Gina↗
NASA NTRS2015

Simple Tool for Aircraft Noise-Reduction Route Design

The design of arrival and departure routes from an airport has to balance the conflicting requirements of fuel efficiency, airport capacity utilization and community emission and noise considerations. The commonly used tools for aircraft noise assessment are the FAA’s Integrated Noise Model (INM) and Aviation Environmental Design Tool (AEDT). These tools are suitable to generate precise noise contours. However, they are harder to use with other tools for route design optimization involving evaluation of a large number of aircraft trajectories. A simplified aircraft noise computation tool, named AIRNOISE, is developed for preliminary aircraft noise-reduction route design in this paper. AIRNOISE computes aircraft noise based on the same SAE-AIR-1845 procedures used by INM and AEDT. AIRNOISE does not consider components related to terrain and atmosphere adjustments. As a result, it is not only computationally efficient but also flexible to use for customized aircraft profiles. The aircraft noise results are compared with the FAA’s AEDT2b and show that the level of accuracy achieved by AIRNOISE can be used to reduce the number of route design options to a small number from a large pool for subsequent accurate analysis by INM.

Li, Jinhua↗
NASA NTRS1975

Analysis and prediction of Doppler noise during solar conjunctions

The results of a study of Doppler data noise during solar conjunctions were presented. During the first half of 1975, a sizeable data base of Doppler data noise (estimates) for the Pioneer 10, Pioneer 11, and Helios 1 solar conjunctions was accumulated. To analyze this data, certain physical assumptions are made, leading to the development of a geometric parameter ("ISI") which correlates strongly with Doppler data noise under varying sun-earth-spacecraft geometries. Doppler noise models are then constructed from this parameter, resulting in the newfound ability to predict Doppler data noise during solar conjunctions, and hence to additionally be in a position to validate Doppler data acquired during solar conjunctions.

Berman, A. L.↗
NASA NTRS1991

Navigation accuracy analysis for the TDRSS Onboard Navigation System (TONS) experiment on EP/EUVE

A navigation accuracy analysis of the TONS (TDRSS Onboard Navigation System) experiment on the Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) is reported. The analysis process includes both sequential estimation covariance analysis and the processing of 'realistic' simulated tracking data. The sensitivity of the navigation accuracy to force modeling and measurement errors is evaluated as a function of the tracking schedule and the process noise model tuning parameters.

Gramling, C. J.↗
NASA NTRSDate not supplied

Comparison of Acoustic Models and Trajectory Generation Methods for an Acoustically-Aware Aircraft

This paper presents a comparison of trajectory generation methodologies using acoustic source noise models of different fidelity for motion planning for an acoustically-aware aircraft subject to constraints on the vehicle dynamic performance, mission, and acoustic footprint of the vehicle at a set of (three-dimensional) observer locations. The performance of a pre-mission Bézier curve-based planner and a (near) real-time stochastic model predictive control planner are compared. Additionally, a comparison is made between the motion planning performance using a lower-fidelity acoustic model based on propeller tip Mach number and omni-directional sound power radiation, and a hemisphere-based higher-fidelity acoustic model. It is demonstrated that the asymmetry in hemisphere-based acoustic model can be exploited for improved flight path planning and trajectory-tracking performance in the presence of acoustic constraints.

Kasey A Ackerman↗
NASA NTRS1997

Frozen-Flux Modelling for Epochs 1915 and 1980

The frozen-flux hypothesis for the Earth's liquid core assumes that convective terms dominate diffusive terms in the induction equation governing the behaviour of the magnetic field at the surface of the core. While highly plausible on the basis of estimates of physical parameters, the hypothesis has been questioned. To study this hypothesis, we improve the method which tests the consistency of magnetic observations with the hypothesis by constructing simple, flux-conserving core-field models fitting the data at pairs of epochs. We introduce a new approach that fixes the patch configurations at each of the two epochs before inversion, so that each configuration is consistent with its respective data set but possesses the same patch topology. We expand upon the inversion algorithm, using quadratic programming to maintain the proper flux sign within patches; the modelling calculations are also extended to include data types that depend non-linearly on the model. Every test of a hypothesis depends on the characterization of the observational uncertainties; we undertake a thorough review of this question. For main-field models, the primary source of uncertainty comes from the crustal field. We base our analysis on statistical models of the crustal magnetization, adjusted to bring it into better conformity with our data set. The noise model permits us to take into account the correlations between the measurements and requires that a different weighting be given to horizontal and vertical components. It also indicates that the observations should be fit more closely than has been the practice heretofore. We apply the revised method to Magsat data from 1980 and survey and observatory data from 1915.5, two data sets believed to be particularly difficult to reconcile with the frozen-flux hypothesis. We compute a pair of simple, flux-conserving models that fit the averaged data from each epoch. We therefore conclude that present knowledge of the geomagnetic fields of 1980 and 1915.5 is consistent with the frozen-flux hypothesis.

OBrien, Michael S.↗
NASA NTRS2005

Ultra Stable Microwave Radiometers for Future Sea Surface Salinity Missions

The NASA Earth Science System Pathfinder (ESSP) mission Aquarius will measure global sea surface salinity with 100-km spatial resolution every 8 days with an average monthly salinity accuracy of 0.2 psu (parts per thousand). This requires an L-band low-noise radiometer with the long-term calibration stability of less than 0.1 K over 8 days. This three-year research program on ultra stable radiometers has addressed the radiometer requirements and configuration necessary to achieve this objective for Aquarius and future ocean salinity missions. The system configuration and component performance have been evaluated with radiometer testbeds at both JPL and GSFC. The research has addressed several areas including component characterization as a function of temperature, a procedure for the measurement and correction for radiometer system non-linearity, noise diode calibration versus temperature, low noise amplifier performance over voltage, and temperature control requirements to achieve the required stability. A breadboard radiometer, utilizing microstrip-based technologies, has been built to demonstrate this long-term stability. This report also presents the results of the radiometer test program, a detailed radiometer noise model, and details of the operational switching sequence optimization that can be used to achieve the low noise and stability requirements. Many of the results of this research have been incorporated into the Aquarius radiometer design and will allow this instrument to achieve its goals.

sea surface salinity↗
NASA NTRS2004

NASA's Quiet Aircraft Technology Project

NASA's Quiet Aircraft Technology Project is developing physics-based understanding, models and concepts to discover and realize technology that will, when implemented, achieve the goals of a reduction of one-half in perceived community noise (relative to 1997) by 2007 and a further one-half in the far term. Noise sources generated by both the engine and the airframe are considered, and the effects of engine/airframe integration are accounted for through the propulsion airframe aeroacoustics element. Assessments of the contribution of individual source noise reductions to the reduction in community noise are developed to guide the work and the development of new tools for evaluation of unconventional aircraft is underway. Life in the real world is taken into account with the development of more accurate airport noise models and flight guidance methodology, and in addition, technology is being developed that will further reduce interior noise at current weight levels or enable the use of lighter-weight structures at current noise levels.

Whitfield, Charlotte E.↗
NASA NTRS1992

Determining the coherence of micropulses

A technique based on analysis of the cross spectra of single-use data from pulsars is described which can be used to measure the coherence properties of, and search for coherent periodicities in, pulsar signals. Several simulated pulsar models are constructed and analyzed to test the technique. From an analysis of 2000 consecutive pulses from PSR 2016 + 28 it is concluded that the micropulse coherence time of 430 MHz is less than the spin period for this object. This could could be consistent with a coherent model if the random phase jitter in such a model is 35 percent or more of the micropulse quasi-periodicity. The subpulse separation of roughly 10 ms is coherent across 4-5 pulse periods and is reasonably consistent with a model of subpulse drift that allows for variation about some mean drift rate. A two-component shot-noise model can reproduce much of the structure seen in the individual pulses as well as the spectra of PSR 2016 + 28.

Strohmayer, T. E.↗