Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nozzle Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Parametric investigation of single-expansion-ramp nozzles at Mach numbers from 0.60 to 1.20

An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of varying six nozzle geometric parameters on the internal and aeropropulsive performance characteristics of single-expansion-ramp nozzles. This investigation was conducted at Mach numbers from 0.60 to 1.20, nozzle pressure ratios from 1.5 to 12, and angles of attack of 0 deg +/- 6 deg. Maximum aeropropulsive performance at a particular Mach number was highly dependent on the operating nozzle pressure ratio. For example, as the nozzle upper ramp length or angle increased, some nozzles had higher performance at a Mach number of 0.90 because of the nozzle design pressure was the same as the operating pressure ratio. Thus, selection of the various nozzle geometric parameters should be based on the mission requirements of the aircraft. A combination of large upper ramp and large lower flap boattail angles produced greater nozzle drag coefficients at Mach number greater than 0.80, primarily from shock-induced separation on the lower flap of the nozzle. A static conditions, the convergent nozzle had high and nearly constant values of resultant thrust ratio over the entire range of nozzle pressure ratios tested. However, these nozzles had much lower aeropropulsive performance than the convergent-divergent nozzle at Mach number greater than 0.60.

Capone, Francis J.↗
NASA NTRS1954

Preliminary Investigation of Performance of Variable-throat Extended-plug-type Nozzles over Wide Range of Nozzle Pressure Ratios

As part of an overall program for the experimental investigation of large-scale jet nozzles, a preliminary evaluation of the internal performance characteristics of several variable-throat extended-plug-type nozzles was obtained over a range of nozzle pressure rations from 2 to 15 with nozzle throat variations as great as 2:1. The extended-plug nozzle attained peak thrust coefficients as high as those which have been attained with fixed-geometry convergent-divergent nozzles. The thrust coefficients of the extended-plug nozzles were relatively insensitive to both nozzle pressure ratio and throat area over the range investigated. The lack of sensitivity of thrust coefficient to nozzle pressure ratio and throat area was due primarily to the absence of severe decreases in thrust coefficient, which are normally observed at low nozzle pressure ratios for convergent-divergent nozzles because of overexpansion. For choked flow, the flow coefficients of the extended-plug nozzles varied from 0.95 to 0.997. A ratio of the outer-shell exit area to nozzle throat area was found to be an important variable affecting nozzle performance. Most of the configurations reported herein showed a small decrease in thrust coefficient at low nozzle pressure ratios; however, it is believed that this characteristic can nearly be eliminated by proper nozzle design.

NOZZLES↗
NASA NTRS1994

Two-dimensional converging-diverging rippled nozzles at transonic speeds

An experimental investigation was performed in the Langley 16-Foot Transonic tunnel to determine the effects of external and internal flap rippling on the aerodynamics of a nonaxisymmetric nozzle. Data were obtained at several Mach numbers from static conditions to 1.2 over a range of nozzle pressure ratios. Nozzles with chordal boattail angles of 10, 20, and 30 degrees, with and without surface rippling, were tested. No effect on discharge coefficient due to surface rippling was observed. Internal thrust losses due to surface rippling were measured and attributed to a combination of additional internal skin friction and shock losses. External nozzle drag for the baseline configurations were generally less than that for the rippled configurations at all free-stream Mach numbers tested. The difference between the baseline and rippled nozzle drag levels generally increased with increasing boat tail angle. The thrust-minus-drag level for each rippled nozzle configuration was less than the equivalent baseline configuration for each Mach number at the design nozzle pressure ratio.

Carlson, John R.↗
NASA NTRS1984

Nozzle optimization study for quiet supersonic wind tunnels

In the present study of the effects of operational factors and nozzle design parameters on the size of the quiet test section in several Mach 3.5 wind tunnel nozzles, the test results from a rapid expansion pilot nozzle with boundary layer removal slots upstream of the throat have shown that the low stream noise levels required for transition research are only obtainable with laminar nozzle wall boundary layers. Six different nozzles were evaluated, including a flat wall radial flow nozzle and a novel rod-wall nozzle. Attention is given to rms surface finish effects on quiet test region length.

Beckwith, I. E.↗
NASA NTRS1991

Static thrust-vectoring performance of nonaxisymmetric convergent-divergent nozzles with post-exit yaw vanes

A static (wind-off) test was conducted in the Static Test Facility of the 16-ft transonic tunnel to determine the performance and turning effectiveness of post-exit yaw vanes installed on two-dimensional convergent-divergent nozzles. One nozzle design that was previously tested was used as a baseline, simulating dry power and afterburning power nozzles at both 0 and 20 degree pitch vectoring conditions. Vanes were installed on these four nozzle configurations to study the effects of vane deflection angle, longitudinal and lateral location, size, and camber. All vanes were hinged at the nozzle sidewall exit, and in addition, some were also hinged at the vane quarter chord (double-hinged). The vane concepts tested generally produced yaw thrust vectoring angles much less than the geometric vane angles, for (up to 8 percent) resultant thrust losses. When the nozzles were pitch vectored, yawing effectiveness decreased as the vanes were moved downstream. Thrust penalties and yawing effectiveness both decreased rapidly as the vanes were moved outboard (laterally). Vane length and height changes increased yawing effectiveness and thrust ratio losses, while using vane camber, and double-hinged vanes increased resultant yaw angles by 50 to 100 percent.

Foley, Robert J.↗
NASA NTRS1991

Transient, hypervelocity flow in an axisymmetric nozzle

The performance of an axisymmetric nozzle designed to produce uniform parallel flow with a nominal Mach number of 8 is examined. The nozzle employs a flow decoupling approach and is calibrated by measuring Pitot pressures near the exit plane for a number of operating conditions. The detailed starting process of the nozzle is simulated numerically, and a quasi-one-dimensional method is used for investigating the transient wave structure and the nozzle starting time over a number of tunnel operating conditions. An axisymmetric Navier-Stokes code is utilized in order to illustrate the multidimensional and viscous aspects of the starting process. Although the steady performance observed is found adequate, settling times are much longer than predicted by the classical quasi-one-dimensional models.

Jacobs, P. A.↗
NASA NTRS1987

Design of supersonic Coanda jet nozzles

The thrust vectoring of supersonic Coanda jets was improved by designing a nozzle to skew the initial jet velocity profile. A new nozzle design procedure, based on the method of characteristics, was developed to design a nozzle which produces a specified exit velocity profile. The thrust vectoring of a simple convergent nozzle, a convergent-divergent nozzle, and a nozzle which produces a skewed velocity profile matched to the curvature of the Coanda surface were expermentially compared over a range of pressure ratios from 1.5 to 3.5. Elimination of the expansion shocks with the C-D nozzle is shown to greatly improve the thrust vectoring; elimination of turning shocks with the skewed profile nozzle further improves the vectoring.

Bevilaqua, Paul M.↗
NASA NTRS1972

Peak axial-velocity decay with single- and multi-element nozzles

Jet peak-velocity decay data were obtained for a variety of circular and noncircular single-element and multi-element nozzles for application to externally-blown-flap (EBF) STOL aircraft. These data permit a rational approach, in terms of element type and element spacing, to nozzles designed to promote mixing of the jet exhaust with the surrounding air. Rapid mixing and the resulting lower axial jet velocity decreases the noise caused by the interaction of jet impingement on the flap assembly of EBF STOL aircraft. Empirical relationships are presented that permit the prediction of peak axial-velocity decay curves for a wide spectrum of mixer-type nozzles. The data are useful also in the design of ejector-type noise suppressors and for the suppression of VTOL downwash velocities caused by vertically oriented exhaust nozzles.

Vonglahn, U. H.↗
NASA NTRS1972

Peak axial-velocity decay with single- and multi-element nozzles.

Jet peak-velocity decay data were obtained for a variety of circular and noncircular single-element and multi-element nozzles for application to externally-blown-flap STOL aircraft. These data permit a rational approach, in terms of element type and element spacing, to nozzles designed to promote mixing of the jet exhaust with the surrounding air. Rapid mixing and the resulting lower axial jet velocity decreases the noise caused by the interaction of jet impingement on the flap assembly of EBF STOL aircraft. Empirical relationships are presented that permit the prediction of peak axial-velocity decay curves for a wide spectrum of mixer-type nozzles. The data are useful also in the design of ejector-type noise suppressors and for the suppression of VTOL downwash velocities caused by vertically oriented exhaust nozzles.

Von Glahn, U. H.↗
NASA NTRS1986

Computation of nozzle flow fields using the PARC2D Navier-Stokes code

Supersonic nozzles which operate at low Reynolds numbers and have large expansion ratios have very thick boundary layers at their exit. This leads to a very strong viscous/inviscid interaction upon the flow within the nozzle and the traditional nozzle design techniques which correct the inviscid core with a boundary layer displacement do not accurately predict the nozzle exit conditions. A full Navier-Stokes code (PARC2D) was used to compute the nozzle flow field. Grids were generated using the interactive grid generator code TBGG. All computations were made on the NASA MSFC CRAY X-MP computer. Comparison was made between the computations and in-house wall pressure measurements for CO2 flow through a conical nozzle having an area ratio of 40. Satisfactory agreement existed between the computations and measurements for a stagnation pressure of 29.4 psia and stagnation temperature of 1060 R. However, agreement did not exist at a stagnation pressure of 7.4 psia. Several reasons for the lack of agreement are possible. The computational code assumed a constant gas gamma whereas gamma for CO2 varied from 1.22 in the plenum chamber to 1.38 at the nozzle exit. Finally, it is possible that condensation occurred during the expansion at the lower stagnation pressure.

Collins, Frank G.↗
NASA NTRS1987

Aviation fuel property effects on altitude relight

The major objective of this experimental program was to investigate the effects of fuel property variation on altitude relight characteristics. Four fuels with widely varying volatility properties (JP-4, Jet A, a blend of Jet A and 2040 Solvent, and Diesel 2) were tested in a five-swirl-cup-sector combustor at inlet temperatures and flows representative of windmilling conditions of turbofan engines. The effects of fuel physical properties on atomization were eliminated by using four sets of pressure-atomizing nozzles designed to give the same spray Sauter mean diameter (50 + or - 10 micron) for each fuel at the same design fuel flow. A second series of tests was run with a set of air-blast nozzles. With comparable atomization levels, fuel volatility assumes only a secondary role for first-swirl-cup lightoff and complete blowout. Full propagation first-cup blowout were independent of fuel volatility and depended only on the combustor operating conditions.

Venkataramani, K.↗
NASA NTRS1986

How different a modern SST would be

The characteristics of a proposed SST are described. The proposed aircraft is to have two engines and an arrow-wing design, a passenger capacity of 250, and attain speeds of Mach 2.7. The low fineness ratio, low-aspect ratio wing planform, different engine nacelles location, and improved lift-to-drag ratio of the aircraft contribute to attaining an economical supersonic cruise. The proposed structural design and materials for the aircraft are examined; the material and design are to be applicable to high Mach and high temperature. Changes in the SST propulsion system, the nozzle designs, and landing and takeoff procedures to improve the operation of the aircraft are discussed.

Driver, C.↗
NASA NTRS2001

Internal Flow Simulation of Enhanced Performance Solid Rocket Booster for the Space Transportation System

An enhanced performance solid rocket booster concept for the space shuttle system has been proposed. The concept booster will have strong commonality with the existing, proven, reliable four-segment Space Shuttle Reusable Solid Rocket Motors (RSRM) with individual component design (nozzle, insulator, etc.) optimized for a five-segment configuration. Increased performance is desirable to further enhance safety/reliability and/or increase payload capability. Performance increase will be achieved by adding a fifth propellant segment to the current four-segment booster and opening the throat to accommodate the increased mass flow while maintaining current pressure levels. One development concept under consideration is the static test of a "standard" RSRM with a fifth propellant segment inserted and appropriate minimum motor modifications. Feasibility studies are being conducted to assess the potential for any significant departure in component performance/loading from the well-characterized RSRM. An area of concern is the aft motor (submerged nozzle inlet, aft dome, etc.) where the altered internal flow resulting from the performance enhancing features (25% increase in mass flow rate, higher Mach numbers, modified subsonic nozzle contour) may result in increased component erosion and char. To assess this issue and to define the minimum design changes required to successfully static test a fifth segment RSRM engineering test motor, internal flow studies have been initiated. Internal aero-thermal environments were quantified in terms of conventional convective heating and discrete phase alumina particle impact/concentration and accretion calculations via Computational Fluid Dynamics (CFD) simulation. Two sets of comparative CFD simulations of the RSRM and the five-segment (IBM) concept motor were conducted with CFD commercial code FLUENT. The first simulation involved a two-dimensional axi-symmetric model of the full motor, initial grain RSRM. The second set of analyses included three-dimensional models of the RSRM and FSM aft motors with four-degree vectored nozzles.

Ahmad, Rashid A.↗
NASA NTRS1983

Advanced technology exhaust nozzle development

The requirement for greater tactical aircraft operational capabilities has led to increasing research emphasis on the refinement of engine/airframe integration methods and exhaust nozzle flexibility. A major prospective advancement in the development of these capabilities takes the form of multifunctional exhaust nozzle systems with thrust reversal and thrust vectoring features, whose operation will be shared by both airframe and powerplant control systems. Attention is presently given to the two-dimensional convergent-divergent and single expansion ramp nozzle designs, with emphasis on the variable geometry mechanical systems by which they assume cruising flight, vectoring, and thrust reversal operations. The nozzles have been wind tunnel model-tested for the cases of the F-18 fighter and a supersonic cruise configuration concept.

Dusa, D. J.↗
NASA NTRS1990

Static investigation of a two-dimensional convergent-divergent exhaust nozzle with multiaxis thrust-vectoring capability

An investigation was conducted in the Static Test Facility of the NASA Langley 16-Foot Transonic Tunnel to determine the internal performance of two-dimensional convergent-divergent nozzles designed to have simultaneous pitch and yaw thrust vectoring capability. This concept utilized divergent flap rotation of thrust vectoring in the pitch plane and deflection of flat yaw flaps hinged at the end of the sidewalls for yaw thrust vectoring. The hinge location of the yaw flaps was varied at four positions from the nozzle exit plane to the throat plane. The yaw flaps were designed to contain the flow laterally independent of power setting. In order to eliminate any physical interference between the yaw flap deflected into the exhaust stream and the divergent flaps, the downstream corners of both upper and lower divergent flaps were cut off to allow for up to 30 deg of yaw flap deflection. The impact of varying the nozzle pitch vector angle, throat area, yaw flap hinge location, yaw flap length, and yaw flap deflection angle on nozzle internal performance characteristics, was studied. High-pressure air was used to simulate jet exhaust at nozzle pressure ratios up to 7.0. Static results indicate that configurations with the yaw flap hinge located upstream of the exit plane provide relatively high levels of thrust vectoring efficiency without causing large losses in resultant thrust ratio. Therefore, these configurations represent a viable concept for providing simultaneous pitch and yaw thrust vectoring.

Taylor, John G.↗