Search NASA⌕ Search

SEARCH · Search NASA

Results for “O CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Experimental Investigation of Crossing Shock Wave-Turbulent Boundary Layer-Bleed Interaction

Results of an experimental investigation of a symmetric crossing shock wave/turbulent boundary layer/bleed interaction are presented for a freestream unit Reynolds number of 1.68 x 10(exp 7)/m, a Mach number of 2.81, and deflection angles of 8 degrees. The data obtained in this study are bleed mass flow rate using a trace gas technique, qualitative information in the form of oil flow visualization, flow field Pitot pressures, and static pressure measurements using pressure sensitive paint. The main objective of this test is two-fold. First, this study is conducted to explore boundary layer control through mass flow removal near a large region of separated flow caused by the interaction of a double fin-induced shock wave and an incoming turbulent boundary layer. Also, a comprehensive data set is needed for computational fluid dynamics code validation.

Kim, Hyun↗
NASA NTRS1977

Comparison of computer codes for calculating dynamic loads in wind turbines

Seven computer codes for analyzing performance and loads in large, horizontal-axis wind turbines were used to calculate blade bending moment loads for two operational conditions of the 100 kW Mod-O wind turbine. Results are compared with test data on the basis of cyclic loads, peak loads, and harmonic contents. Four of the seven codes include rotor-tower interaction and three are limited to rotor analysis. With a few exceptions, all calculated loads were within 25% of nominal test data.

Spera, D. A.↗
DOE OSTI2020

H- and Dissociation in Ultra-hot Jupiters: A Retrieval Case Study of WASP-18b

Atmospheres of a number of ultra-hot Jupiters (UHJs) with temperatures ≳2000 K have been observed recently. Many of these planets show largely featureless thermal spectra in the near-infrared observed with the HST WFC3 spectrograph (1.1–1.7 μm) even though this spectral range contains strong H{sub 2}O opacity. Recent works have proposed the possibility of H- opacity masking the H{sub 2}O feature and/or thermal dissociation of H{sub 2}O causing its apparent depletion at the high temperatures of UHJs. In this work, we test these hypotheses using observations of the exoplanet WASP-18b as a case study. We report detailed atmospheric retrievals of the planet using the HyDRA retrieval code, extended to include the effects of H- opacity and thermal dissociation. We report constraints on the H{sub 2}O, CO, and H- abundances as well as the pressure–temperature profile of the dayside atmosphere for retrievals with and without H-/dissociation for each data set. We find that the H{sub 2}O and H- abundances are relatively unconstrained given the featureless WFC3 spectra. We do not conclusively detect H- in the planet, contrary to previous studies that used equilibrium models to infer its presence. The constraint on the CO abundance depends on the combination of WFC3 and Spitzer data, ranging from solar to super-solar CO values. We additionally see signs of a thermal inversion from two of the data sets. Our study demonstrates the potential of atmospheric retrievals of UHJs, including the effects of H- and thermal dissociation of molecules.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1988

Steady and unsteady transonic small disturbance analysis of realistic aircraft configurations

A transonic unsteady aerodynamic and aeroelasticity code CAP-TSD (Computational Aeroelasticity Program-Transonic Small Disturbance) has been developed for application to realistic aircraft configurations. The code uses a time-accurate approximate factorization (AF) algorithm for solution of the unsteady transonic small-disturbance potential equation. The paper gives an overview of the CAP-TSD code development effort and reports on recent algorithm modifications. The algorithm modifications include: an Engquist-Osher (E-O) type-dependent switch to treat regions of supersonic flow, extension of the E-O switch for second-order spatial accuracy, nonisentropic effects to treat strong-shock cases, nonreflecting far field boundary conditions for unsteady applications, and several modifications to accelerate convergence to steady state. The modifications have significantly improved the stability of the AF algorithm and hence the reliability of the CAP-TSD code in general. Calculations are also presented from a flutter analysis of a 45-deg sweptback wing which agree well with experimental data. The paper present descriptions of the CAP-TSD code and algorithm details along with results.

Batina, John T.↗
NASA NTRS1989

Aspects of efficient and reliable multibody system simulation

Multibody system equations can be generated in various forms. All of these may be interpreted as results of two basic approaches, the augmentation- and the elimination-method. The former method yields the descriptor form of the system motion, a set of differential-algebraic equations (DAE), and the latter the state space representation, a minimal set of ordinary differential equations (ODE). Both of these methods are surveyed. Particular emphasis is on the discussion of recursive computational schemes, generating the equations of motion with a number of operations, which is proportional to the number N of system bodies (O(N)-formulations). For simulation purposes one would like to create that set of system equations, which can be generated most efficiently and for which the most efficient and reliable solution techniques are available. Numerical solution techniques for ODE have been studied in great detail and they are well-developed. By contrast, DAE have not been investigated for such a long time. In view of new developments in the latter field the generation of all the equations required for an efficient and reliable solution of DAE describing multibody system motion is discussed. These methods, i.e., an O(N)-formulation and new techniques for solving DAE, are implemented in the SIMPACK code. Its capabilities are illustrated by simulation of multibody robot models.

Schwertassek, R.↗
NASA NTRS2005

The Application of FLUKA to Dosimetry and Radiation Therapy

Monte Carlo transport codes like FLUKA are useful for many purposes, and one of those is the simulation of the effects of radiation traversing the human body. In particular, radiation has been used in cancer therapy for a long time, and recently this has been extended to include heavy ion particle beams. The advent of this particular type of therapy has led to the need for increased capabilities in the transport codes used to simulate the detailed nature of the treatment doses to the Y ~ ~ O U S tissues that are encountered. This capability is also of interest to NASA because of the nature of the radiation environment in space.[l] While in space, the crew members bodies are continually being traversed by virtually all forms of radiation. In assessing the risk that this exposure causes, heavy ions are of primary importance. These arise both from the primary external space radiation itself, as well as fragments that result from interactions during the traversal of that radiation through any intervening material including intervening body tissue itself. Thus the capability to characterize the details of the radiation field accurately within a human body subjected to such external 'beams" is of critical importance.

Wilson, Thomas L.↗
DOE OSTI2024

Multicode benchmark on simulated Ti K-edge x-ray absorption spectra of Ti-O compounds

X-ray absorption spectroscopy (XAS) is an element-specific materials characterization technique that is sensitive to structural and electronic properties. First-principles simulated XAS has been widely used as a powerful tool to interpret experimental spectra and draw physical insights. Recently, there has also been growing interest in building computational XAS databases to enable data analytics and machine learning applications. However, there are non-trivial differences among commonly used XAS simulation codes, both in underlying theoretical formalism and in technical implementation. Reliable and reproducible computational XAS databases require systematic benchmark studies. In this work, we benchmarked Ti K-edge XAS simulations of ten representative Ti-O binary compounds, which we refer to as the Ti-O-10 dataset, using three state-of-the-art codes: XSPECTRA, OCEAN and exciting. We systematically studied the convergence behavior with respect to the input parameters and developed a workflow to automate and standardize the calculations to ensure converged spectra. Our benchmark comparison considers a 35 eV spectral range starting from the K-edge onset, representative of widely used near-edge spectra. Quantitative comparison over this range is based on Spearman’s rank correlation score (r sp ). Our results show: (1) the two Bethe-Salpeter equation (BSE) codes (OCEAN and exciting) have excellent agreement with an average $r$ $sp$ of 0.998; (2) good agreement is obtained between the core-hole potential code (XSPECTRA) and BSE codes (OCEAN and exciting) with an average $r$ $sp$ of 0.990, and this smaller $r$ $sp$ reflects the noticeable differences in the main edge spectral shape that can be primarily attributed to the difference in the strength of the screened core-hole potential; (3) simulations from both methods overall reproduce well the main experimental spectral features of rutile and anatase, and the different treatments of the screened core-hole potential have visible impact on pre-edge intensities and the peak ratio of the main edge; (4) there exist moderate differences in the relative edge alignment of the three codes with a standard deviation of about 0.2 eV, which arise from multiple contributions including the frozen core approximation, final state effects, and different approximations used for the self-energy correction. In conclusion, our benchmark study provides important standards for first-principles XAS simulations with broad impact in data-driven XAS analysis.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Destruction of N/2D/ by O2 - A major source of 6300 A dayglow emission

The paper discusses the N(2D) + O2 yields NO + O(1D), for k1 reaction, and examines under different geophysical conditions, the effect of this source of 6300 A surface brightness on the dayglow redline. In calculating the 6300 A volume emission rate, a computer code is used which provides the thermal electron density, photoelectron flux, ion concentrations, electron and ion temperatures and odd nitrogen densities required to evaluate the O(1D) sources and sinks. It is found that under most conditions this source is the dominant mechanism responsible for the production of the 6300 A dayglow above 150 km. The volume emission rate of this source in summer is 2.5 times larger than the sum of all other sources at 180 km, and 1.5 times as large in winter. In addition, when the N(2D) source of O(1D) is taken into account, the rate coefficient for quenching of O(1D) by N2 is estimated to be 4 plus or minus 1 x 10 to the -11th cu cm per sec.

Torr, D. G.↗
NASA NTRS1985

A time-dependent theoretical model of the polar wind Preliminary results

The coupled, time-dependent continuity, momentum, and energy equations of a two-ion O(+) and H(+) quasi-neutral plasma were solved in order to extend understanding of polar wind behavior. This numerical code allows studies of the time dependent behavior of polar wind-type flows into and out of the ionosphere. Initial studies indicate that the typical time constants for electron and ion temperature changes are of the order of minutes and tens of minutes, respectively. The response time of the minor high altitude ion O(+) is less than an hour, whereas that of the major ion, H(+), is many hours. The initial test runs also demonstrate the fact that temporary supersonic flows of both O(+) and H(+) are possible, especially in the presence of significant ion heating.

Gombosi, T. I.↗
DOE OSTI2025

The advanced evolution of massive stars

The nuclear rates for reactions involving 12 C and 16 O are key to computing the energy release and nucleosynthesis evolution of massive stars during their advanced burning phases. Ultimately, these burning rates shape the stellar structure and evolution and influence the nature of the compact objects produced at the end of the stellar life. We explore the implications of new nuclear reaction rates from both experimental and theoretical studies for 12 C(α, γ) 16 ​O, 12 C+ 12​ C, 12 C+ 16 ​O, and 16 O+ 16 ​O reactions for massive stars. Our goal is to investigate how the chemical structure and nucleosynthesis evolve from the He-exhaustion stage to the O-burning phase and how these processes influence the ultimate stellar fate. We computed rotating and non-rotating models for stars of different masses at solar metallicity. We used the stellar evolution code GENEC, which includes a large network of nuclear reactions and isotopes involved in advanced phases, as well as updated rates for 12 C(α,γ) 16 O. For the three fusion reactions involving 12 C and 16 O, we considered new rates following a data-driven fusion suppression scenario (hereafter HIN(RES)) and new theoretical rates obtained with time-dependent Hartree-Fock (TDHF) calculations. The updated 12 C(α, γ) 16 ​O rates mainly impact the chemical structure evolution changing the 12 C/ 16 O ratio at He-exhaustion and have little effect on the CO core mass. This variation in the 12 C/ 16 O ratio is in some cases critical for predicting the final fate of the model, which is very sensitive to 12 C abundance, and in particular the 20 M ⊙ remnant may change from a black hole to a neutron star. The He-burning (C-burning) lifetime is also decreased (increased) by about −2% (+15%). The combined new rates for 12 C+ 12 ​C and 16 O+ 16 ​O fusion reactions according to the HIN(RES) model lead to shorter C- and O-burning lifetimes by ≈ − 10%, and −50%, respectively, and shift the ignition conditions to higher temperatures and densities. In contrast, the theoretical TDHF rates primarily affect C-burning, increasing its duration by about 30% and lowering the ignition temperature. These changes modify the chemical structure of the core, the size and duration of C-burning shells, and hence their compactness. They also impact the central and shell nucleosynthesis (by ±1 dex and by factors of ±2–10, respectively), while 12 C+ 16 ​O reaction rates variations remain the least important.

abundances↗
DOE OSTI2022

Assessment of BISON capabilities for component-level prediction of tritium transport in fusion and fission applications

Here we assessed the hydrogen migration and redistribution model implemented in the BISON fuel performance code for component-level tritium transport applications in fusion and fission example scenarios. We developed BISON models of an ITER heat exchanger, light water reactor fuel cladding, and a fluoride salt cooled high temperature reactor heat exchanger. Reasonable agreement between reported values in reference studies and BISON predictions demonstrated the ability of the BISON models to predict tritium transport behavior through steel materials. Next, sensitivity and uncertainty analysis was used to understand key parameter sensitivities within the BISON model for evaluation of tritium migration and redistribution. . The sensitivity analysis showed that the diffusivity activation energy was the most important parameter and that the heat of transport was the least important parameter for tritium migration in steels. Overall, the capabilities of the BISON code for component level modeling of tritium transport are promising.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

TorbeamNN: machine learning-based steering of ECH mirrors on KSTAR

We have developed TorbeamNN: a machine learning surrogate model for the TORBEAM ray tracing code to predict electron cyclotron heating (ECH) and current drive locations in tokamak plasmas. TorbeamNN provides more than a 100 times speed-up compared to the highly optimized and simplified real-time implementation of TORBEAM without any reduction in accuracy compared to the offline, full fidelity TORBEAM code. The model was trained using KSTAR ECH mirror geometries and works for both O-mode and X-mode absorption. The TorbeamNN predictions have been validated both offline and real-time in experiment. TorbeamNN has been utilized to track an ECH absorption vertical position target in dynamic KSTAR plasmas as well as under varying toroidal mirror angles and with a minimal average tracking error of 0.5 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

ABACUSSUMMIT : a massive set of high-accuracy, high-resolution N -body simulations

We present the public data release of the AbacusSummit cosmological N-body simulation suite, produced with the Abacus N-body code on the Summit supercomputer of the Oak Ridge Leadership Computing Facility. Abacus achieves $\mathcal {O}(10^{-5})$ median fractional force error at superlative speeds, calculating 70M particle updates per second per node at early times, and 45M particle updates per second per node at late times. The simulation suite totals roughly 60 trillion particles, the core of which is a set of 139 simulations with particle mass $2\times 10^{9}\, h^{-1}\, \mathrm{M}_\odot$ in box size $2\, h^{-1}\, \mathrm{Gpc}$. The suite spans 97 cosmological models, including Planck 2018, previous flagship simulation cosmologies, and a linear derivative and cosmic emulator grid. A subsuite of 1883 boxes of size $500\, h^{-1}\, \mathrm{Mpc}$ is available for covariance estimation. AbacusSummit data products span 33 epochs from z = 8 to 0.1 and include light cones, full particle snapshots, halo catalogues, and particle subsets sampled consistently across redshift. AbacusSummit is the largest high-accuracy cosmological N-body data set produced to date.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Braiding for the win: Harnessing braiding statistics in topological states to play quantum games

Nonlocal quantum games provide proof of principle that quantum resources can confer an advantage at certain tasks. They also provide a compelling way to explore the computational utility of phases of matter on quantum hardware. In a recent paper [O. Hart et al., Phys. Rev. Lett. 134, 130602 (2025)], we demonstrated that a toric code resource state conferred advantage at a certain nonlocal game, which remained robust to small deformations of the resource state. In this paper we demonstrate that this robust advantage is a generic property of resource states drawn from topological or fracton ordered phases of quantum matter. To this end, we illustrate how several other states from paradigmatic topological and fracton ordered phases can function as resources for suitably defined nonlocal games, notably the three-dimensional toric-code phase, the X-cube fracton phase, and the double-semion phase. The key in every case is to design a nonlocal game that harnesses the characteristic braiding processes of a quantum phase as a source of contextuality. We unify the strategies that take advantage of mutual statistics by relating the operators to be measured to order and disorder parameters of an underlying generalized symmetry-breaking phase transition. Additionally, by connecting the win probability to twist products, we show that success at the game serves as a many-body entanglement witness. Namely, if the players implement a perfect quantum strategy on large length scales, the quantum state they share cannot be connected to a trivial product state via a constant-depth local unitary circuit. Lastly, we massively generalize the family of games that admit perfect strategies when codewords of homological quantum error-correcting codes are used as resources.

Fractons↗
DOE OSTI2021

PMatch v.1.0

SAND2021-14236 O PMatch is a function matching plugin for Ghidra. PMatch uses hashing and p-code to create function databases and complete function matching on other binary files. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Wright, Christopher↗
NASA NTRS1982

User's manual for Axisymmetric Diffuser Duct (ADD) code. Volume 1: General ADD code description

This User's Manual contains a complete description of the computer codes known as the AXISYMMETRIC DIFFUSER DUCT code or ADD code. It includes a list of references which describe the formulation of the ADD code and comparisons of calculation with experimental flows. The input/output and general use of the code is described in the first volume. The second volume contains a detailed description of the code including the global structure of the code, list of FORTRAN variables, and descriptions of the subroutines. The third volume contains a detailed description of the CODUCT code which generates coordinate systems for arbitrary axisymmetric ducts.

Anderson, O. L.↗
NASA NTRS1982

User's manual for Axisymmetric Diffuser Duct (ADD) code. Volume 3: ADD code coordinate generator

This User's Manual contains a complete description of the computer codes known as the Axisymmetric Diffuser Duct (ADD) code. It includes a list of references which describe the formulation of the ADD code and comparisons of calculation with experimental flows. The input/output and general use of the code is described in the first volume. The second volume contains a detailed description of the code including the global structure of the code, list of FORTRAN variables, and descriptions of the subroutines. The third volume contains a detailed description of the CODUCT code which generates coordinate systems for arbitrary axisymmetric ducts.

Anderson, O. L.↗