Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL MODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

eLISA Telescope In-field Pointing and Scattered Light Study

The orbital motion of the three spacecraft that make up the eLISA Observatory constellation causes long-arm line of sight variations of approximately ± one degree over the course of a year. The baseline solution is to package the telescope, the optical bench, and the gravitational reference sensor (GRS) into an optical assembly at each end of the measurement arm, and then to articulate the assembly. An optical phase reference is exchanged between the moving optical benches with a single mode optical fiber (“backlink” fiber). An alternative solution, referred to as in-field pointing, embeds a steering mirror into the optical design, fixing the optical benches and eliminating the backlink fiber, but requiring the additional complication of a two-stage optical design for the telescope. We examine the impact of an in-field pointing design on the scattered light performance.

Livas, J↗

Visualization of localized photon modes of ZnO nanorods by scanning cathodoluminescence

The scanning cathodoluminescence spectra and images of a ZnO nanorod with two mirrors at the end faces are studied at 10 K. Emission peaks of bound excitons and edge luminescence are observed in the ultraviolet spectral region. The spatial distribution pattern of emission intensity corresponding to localized photon modes of the nanorod is recorded at different wavelengths. A new method of visualization of localized optical modes in micro- and nano-sized laser cavities is suggested.

36 MATERIALS SCIENCE↗

Parametric Optomechanical Oscillations in Two-dimensional Slot-type High-Q Photonic Crystal Cavities

We experimentally demonstrate an optomechanical cavity based on an air-slot photonic crystal cavity with optical quality factor Q{sub o} = 4.2 x 10{sup 4} and a small modal volume of 0.05 cubic wavelengths. The optical mode is coupled with the in-plane mechanical modes with frequencies up to hundreds of MHz. The fundamental mechanical mode shows a frequency of 65 MHz and a mechanical quality factor of 376. The optical spring effect, optical damping, and amplification are observed with a large experimental optomechanical coupling rate g{sub om}/2{pi} of 154 GHz/nm, corresponding to a vacuum optomechanical coupling rate g*/2{pi} of 707 kHz. With sub-mW or less input power levels, the cavity exhibits strong parametric oscillations. The phase noise of the photonic crystal optomechanical oscillator is also measured.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strain induced modification in phonon dispersion curves of monolayer boron pnictides

In the frame work of density functional theory, the biaxial strain induced phonon dispersion curves of monolayer boron pnictides (BX, X = N, P, As, and Sb) have been investigated. The electron-ion interactions have been modelled using ultrasoft pseudopotentials while exchange-correlation energies have been approximated by the method of local density approximation in the parameterization of Perdew-Zunger. The longitudinal and transverse acoustic phonon modes of boron pnictide sheets show linear dependency on wave vector k{sup →} while out of plane mode varies as k{sup 2}. The in-plane longitudinal and out of plane transverse optical modes in boron nitride displaying significant dispersion similar to graphene. We have analyzed the biaxial strain dependent behaviour of out of plane acoustic phonon mode which is linked to ripple for four BX sheets using a model equation with shell elasticity theory. The strain induces the hardening of this mode with tendency to become more linear with increase in strain percentage. The strain induced hardening of out of plane acoustic phonon mode indicates the absence of rippling in these compounds. Our band structure calculations for both unstrained and strained 2D h-BX are consistent with previous calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of surface phonon modes in the Raman spectrum of ZnSe nanoparticles on adsorption of 4-mercaptopyridine

By chemically etching a thin film of crystalline ZnSe with acid, we observe a strong Raman enhancement of the surface phonon modes of ZnSe on adsorption of a molecule (4-mercaptopyridine). The surface is composed of oblate hemi-ellipsoids, which has a large surface-to-bulk ratio. The assignment of the observed modes (at 248 and 492 cm{sup −1}) to a fundamental and first overtone of the surface optical mode is consistent with observations from high-resolution electron energy loss spectroscopy as well as calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trapping of a microsphere pendulum resonator in an optical potential

We propose a method to spatially confine or corral the movements of a micropendulum via the optical forces produced by two simultaneously excited optical modes of a photonic molecule comprising two microspherical cavities. We discuss how the cavity-enhanced optical force generated in the photonic molecule can create an optomechanical potential of about 10 eV deep and 30 pm wide, which can be used to trap the pendulum at any given equilibrium position by a simple choice of laser frequencies. This result presents opportunities for very precise all-optical self-alignment of microsystems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Time Constants for Optical Fiber Temperature Sensing using a Thermal Resistance Approach

Optical fibers are immune to electromagnetic interference, have no moving parts, no applied voltages, no special environmental conditions, and they are extremely small (100's of microns in diameter). The U.S. Department of Energy is interested in extending this technology to extremely high temperature radiation environments for the purposes of developing in-pile instrumentation for the restart of TREAT (Transient Reactor Test Facility). TREAT is an air-cooled, thermal, heterogeneous test reactor facility that was designed to evaluate reactor fuels and structural materials under conditions that simulate various types of transient overpower and under-cooling conditions that may be postulated to occur in a nuclear reactor. Spatially distributed temperature measurements can be made using an Optical Backscatter Reflectometer (such as, model 4600, manufactured by Luna Innovations, Inc.), coupled to single-mode optical fiber that is placed in an in-pile nuclear reactor testing facility. In-pile temperature sensing for the TREAT reactor will need to have a fast response to temperature changes, since the reactor pulse will be on the order of 100 msec. The sensors must also be robust enough to be installed in the testing facility; this requires the fibers to be in a protective capillary tubing that is made of a tough material, such as stainless steel. The temperature response of the fiber will be delayed by the capillary tubing. This paper discusses the characterization and modeling of the thermal time constants of the sensors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Stable and Unstable Spatial Modes in a Resonator with a Half-Disk Shape

This work was devoted to the study of stable and unstable optical modes in segment shaped resonators. The size of the studied resonators was much larger than the wavelength of the emitted light, that allowed to use the approaches of geometric optics. It was observed, that with an increase in the δ/R deviation parameter (where δ is the deviation from the center of the half-disk) only a small number of stable spatial modes remain. The possibility of the existence of “sealed” (non-radiating modes) and “open” modes (radiating modes) in resonators of this type was also shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bose–Einstein condensation versus Dicke–Hepp–Lieb transition in an optical cavity

We provide an exact solution for the interplay between Bose–Einstein condensation and the Dicke–Hepp–Lieb self-organization transition of an ideal Bose gas trapped inside a single-mode optical cavity and subject to a transverse laser drive. Based on an effective action approach, we determine the full phase diagram at arbitrary temperature, which features a bi-critical point where the transitions cross. We calculate the dynamically generated band structure of the atoms and the associated suppression of the critical temperature for Bose–Einstein condensation in the phase with a spontaneous periodic density modulation. Moreover, we determine the evolution of the polariton spectrum due to the coupling of the cavity photons and the atomic field near the self-organization transition, which is quite different above or below the Bose–Einstein condensation temperature. At low temperatures, the critical value of the Dicke–Hepp–Lieb transition decreases with temperature and thus thermal fluctuations can enhance the tendency to a periodic arrangement of the atoms. -- Highlights: •Atoms inside a driven cavity can undergo two transitions: self-organization and BEC. •The phase diagram has four phases which coexist at a bi-critical point. •Atom–cavity coupling creates a dynamical lattice for the atoms. •Finite temperature can enhance the tendency towards self-organization. •We calculate the detailed spectrum of the polaritonic excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical fibres and fibre tapers with an array of Bragg gratings

The properties of optical fibres with an array of fibre Bragg gratings written directly during the fibre drawing are considered. Such optical fibres offer new possibilities for producing new types of active and passive fibre elements due to the enhanced back-reflected signal of the so-called artificial Rayleigh scattering, and are of interest for modelling physical phenomena associated with the statistics of reflecting centres in optical fibres, such as, e.g., localisation of photons. We studied fibres with an array of Bragg gratings written in photosensitive fibres, ordinary single-mode optical fibre of the SMF-28 type and in fibre with a core doped with erbium ions. To control the spectrum width of the reflected signal, we used chirped phase masks, as well as writing arrays of gratings in tapered optical fibres. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical system and method for gas detection and monitoring

A free-space optical path of an optical interferometer is disposed in an environment of interest. A light beam is guided to the optical interferometer using a single-mode optical fiber. The light beam traverses the interferometer's optical path. The light beam guided to the optical path is combined with the light beam at the end of the optical path to define an output light. A temporal history of the output light is recorded.

Polzin, Kurt A.↗

Adiabatic Tip-Plasmon Focusing for Nano-Raman Spectroscopy

True nanoscale optical spectroscopy requires the efficient delivery of light for a spatially nanoconfined excitation. We utilize adiabatic plasmon focusing to concentrate an optical field into the apex of a scanning probe tip of {approx}10 nm in radius. The conical tips with the ability for two-stage optical mode matching of the surface plasmon polariton (SPP) grating-coupling and the adiabatic propagating SPP conversion into a localized SPP at the tip apex represent a special optical antenna concept for far-field transduction into nanoscale excitation. The resulting high nanofocusing efficiency and the spatial separation of the plasmonic grating coupling element on the tip shaft from the near-field apex probe region allows for true background-free nanospectroscopy. As an application, we demonstrate tip-enhanced Raman spectroscopy (TERS) of surface molecules with enhanced contrast and its extension into the near-IR with 800 nm excitation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiation Losses Due to Tapering of a Double-Core Optical Waveguide

The theoretical model we designed parameterizes the power losses as a function of .the profile shape for a tapered, single mode, optical dielectric coupler. The focus of this project is to produce a working model that determines the power losses experienced by the fibers when light crosses a taper region. This phenomenon can be examined using coupled mode theory. The optical directional coupler consists of a parallel, dual-channel, waveguide with minimal spacing between the channels to permit energy exchange. Thus, power transfer is essentially a function of the taper profile. To find the fields in the fibers, the approach used was that of solving the Helmholtz equation in cylindrical coordinates involving Bessel and modified Bessel functions depending on the location.

Lyons, Donald R.↗

Experimental generation of tripartite polarization entangled states of bright optical beams

The multipartite polarization entangled states of bright optical beams directly associating with the spin states of atomic ensembles are one of the essential resources in the future quantum information networks, which can be conveniently utilized to transfer and convert quantum states across a network composed of many atomic nodes. In this letter, we present the experimental demonstration of tripartite polarization entanglement described by Stokes operators of optical field. The tripartite entangled states of light at the frequency resonant with D1 line of Rubidium atoms are transformed into the continuous variable polarization entanglement among three bright optical beams via an optical beam splitter network. The obtained entanglement is confirmed by the extended criterion for polarization entanglement of multipartite quantized optical modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graded-index whispering gallery mode resonators

Whispering gallery mode optical resonators which have spatially-graded refractive indices. In one implementation, the refractive index spatially increases with a distance from an exterior surface of such a resonator towards an interior of the resonator to produce substantially equal spectral separations for different whispering gallery modes. An optical coupler may be used with such a resonator to provide proper optical coupling.

Savchenkov, Anatoliy↗

Hamiltonian chaos in a coupled BEC-optomechanical-cavity system

We present a theoretical study of a hybrid optomechanical system consisting of a Bose-Einstein condensate (BEC) trapped inside a single-mode optical cavity with a moving end mirror. The intracavity light field has a dual role: it excites a momentum side mode of the condensate, and acts as a nonlinear spring that couples the vibrating mirror to that collective density excitation. We present the dynamics in a regime where the intracavity optical field, the mirror, and the side-mode excitation all display bistable behavior. In this regime we find that the dynamics of the system exhibits Hamiltonian chaos for appropriate initial conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical phonons in PbTe/CdTe multilayer heterostructures

The infrared reflection spectra of PbTe/CdTe multilayer nanostructures grown by molecular-beam epitaxy are measured in the frequency range of 20–5000 cm{sup −1} at room temperature. The thicknesses and high-frequency dielectric constants of the PbTe and CdTe layers and the frequencies of the transverse optical (TO) phonons in these structures are determined from dispersion analysis of the spectra. It is found that the samples under study are characterized by two TO phonon frequencies, equal to 28 and 47 cm{sup −1}. The first frequency is close to that of TO phonons in bulk PbTe, and the second is assigned to the optical mode in structurally distorted interface layers. The Raman-scattering spectra upon excitation with the radiation of an Ar{sup +} laser at 514.5 nm are measured at room and liquid-nitrogen temperatures. The weak line at 106 cm{sup −1} observed in these spectra is attributed to longitudinal optical phonons in the interface layers.

36 MATERIALS SCIENCE↗