Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical interferometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Spectrally Resolved Synthetic Aperture Imaging Interferometer: Final Report of NASA Innovative Advanced Concepts - Phase 1 Study

The Spectrally Resolved Synthetic-Aperture Imaging Interferometer (SRSAII) is a system proposed to provide high-resolution and high-sensitivity measurements of astronomical objects. SRSAII uses long baseline interferometric methods to achieve the resolution and low-noise, high time-precision detection to achieve the sensitivity. The primary goal of the SRSAII study was to lay out a framework for using new optical physics technologies to directly resolve, both spatially and spectrally, the disk of an exoplanet. In addition to the ambitious goal of directly resolving an exoplanet, the SRSAII team also sought to identify science opportunities achievable with intermediate system configurations which may offer resolution significantly higher than the current state of the art, but insufficient for direct resolution of an exoplanetary disk. An operational SRSAII system can function with essentially arbitrarily large baselines, achieving correspondingly high angular resolution. The primary limitation occurs in the system sensitivity, which became the major technical focus for study. In this report, we compare the predicted performance (sensitivity in SNR (Signal-to-Noise Ratio) along with angular resolution) of three interferometric techniques: direct detection (also known as homodyne interferometry), multi-channel intensity interferometry (using the Hanbury Brown and Twiss effect), and multi-channel heterodyne interferometry (using an optical frequency comb as a local oscillator). Additionally, quantum-assisted interferometry is also explored as a prospective enhancement of established methods. This report presents a survey of the technologies that enable the SRSAII techniques - optical frequency combs, single photon detectors, and photonic integrated circuits. These technologies are the basis of methods critical to SRSAII's success: precision timing, length and frequency metrology, sensitive photodetection, fine-scale wavelength filtering, and dense multi-channel operation. Lastly, we give some notional performance metrics and propose some possible experimental observations.

High Resolultion↗

Optical Diagnostics of Solution Crystal Growth

Non-contact optical techniques such as, optical heterodyne, ellipsometry and interferometry, for real time in-situ monitoring of solution crystal growth are demonstrated. Optical heterodyne technique has the capability of measuring the growth rate as small as 1A/sec. In a typical Michelson interferometer set up, the crystal is illuminated by a Zeeman laser with frequency omega(sub 1) and the reference beam with frequency omega(sub 2). As the crystal grows, the phase of the rf signal changes with respect to the reference beam and this phase change is related to the crystal growth rate. This technique is demonstrated with two examples: (1) by measuring the copper tip expansion/shrinkage rate and (2) by measuring the crystal growth rate of L-Arginine Phosphate (LAP). The first test shows that the expansion/shrinkage rate of copper tip was fast in the beginning, and gets slower as the expansion begins to stabilize with time. In crystal growth, the phase change due the crystal growth is measured using a phase meter and a strip chart recorder. Our experimental results indicate a varied growth rate from 69.4 to 92.6A per sec. The ellipsometer is used to study the crystal growth interface. From these measurements and a theoretical modeling of the interface, the various optical parameters can be deduced. Interferometry can also be used to measure the growth rate and concentration gradient in the vicinity of the crystal.

Kim, Yongkee↗

Optical Distortion Evaluation in Large Area Windows using Interferometry

It is important that imagery seen through large area windows, such as those used on space vehicles, not be substantially distorted. Many approaches are described in the literature for measuring the distortion of an optical window, but most suffer from either poor resolution or processing difficulties. In this paper a new definition of distortion is presented, allowing accurate measurement using an optical interferometer. This new definition is shown to be equivalent to the definitions provided by the military and the standards organizations. In order to determine the advantages and disadvantages of this new approach the distortion of an acrylic window is measured using three different methods; image comparison, Moiré interferometry, and phase-shifting interferometry.

Interferometer↗

Astronomical interferometry on the Moon

Optical interferometric arrays are particularly attractive candidates for a manned lunar base. A permanent lunar can provide support for a variety of astronomical investigations. An optical interferometric array, perhaps of the general form of the VLA but designed for optical instead of radio wavelengths, would lead to a qualitative advance in the understanding of the universe. A wide variety of scientific problems could be addressed by such an instrument. The stellar analogs of the solar cycle, the behavior of sunspots on other stars, the magnetic field configurations of other stars, and the behavior of dynamic plasma phenomena such as flares and winds are examples of star related problems that ultimately would lead to both increased understanding of our Sun and fundamental knowledge of the manner in which stars form and evolve.

Burke, Bernard F.↗

BIOME: An Ecosystem Remote Sensor Based on Imaging Interferometry

Until recent times, optical remote sensing of ecosystem properties from space has been limited to broad band multispectral scanners such as Landsat and AVHRR. While these sensor data can be used to derive important information about ecosystem parameters, they are very limited for measuring key biogeochemical cycling parameters such as the chemical content of plant canopies. Such parameters, for example the lignin and nitrogen contents, are potentially amenable to measurements by very high spectral resolution instruments using a spectroscopic approach. Airborne sensors based on grating imaging spectrometers gave the first promise of such potential but the recent decision not to deploy the space version has left the community without many alternatives. In the past few years, advancements in high performance deep well digital sensor arrays coupled with a patented design for a two-beam interferometer has produced an entirely new design for acquiring imaging spectroscopic data at the signal to noise levels necessary for quantitatively estimating chemical composition (1000:1 at 2 microns). This design has been assembled as a laboratory instrument and the principles demonstrated for acquiring remote scenes. An airborne instrument is in production and spaceborne sensors being proposed. The instrument is extremely promising because of its low cost, lower power requirements, very low weight, simplicity (no moving parts), and high performance. For these reasons, we have called it the first instrument optimized for ecosystem studies as part of a Biological Imaging and Observation Mission to Earth (BIOME).

Peterson, David L.↗

Optical metrology for Starlight Separated Spacecraft Stellar Interferometry Mission

We describe a high-precision inter-spacecraft metrology system designed for NASA 's StarLight mission, a space-based separated-spacecraft stellar interferometer. It consists of dual-target linear metrology, based on a heterodyne interferometer with carrier phase modulation, and angular metrology designed to sense the pointing of the laser beam and provides bearing information. The dual-target operation enables one metrology beam to sense displacement of two targets independently. We present the current design, breadboard implementation of the Metrology Subsystem in a stellar interferometer testbed and the present state of development of flight qualifiable subsystem components.

metrology stellar interferometry formation flying↗

Stellar figure sensor

A compilation of analytical and experimental data is presented concerning the stellar figure sensor. The sensor is an interferometric device which is located in the focal plane of an orbiting large space telescope (LST). The device was designed to perform interferometry on the optical wavefront of a single star after it has propagated through the LST. An analytical model of the device was developed and its accuracy was verified by an operating laboratory breadboard. A series of linear independent control equations were derived which define the operations required for utilizing a focal plane figure sensor in the control loop for the secondary mirror position and for active control of the primary mirror.

Peters, W. N.↗

Stellar interferometer for figure sensing of orbiting astronomical telescopes

An interferometric device designed to be located in the focal plane of a large astronomical telescope is presented. The prime application is for the forthcoming large space telescope. The device is to perform interferometry on the optical wavefront arising from a single star after it has propagated through the telescope. The concept of a focal plane figure sensor has been experimentally verified by fabricating and testing an operating laboratory breadboard figure sensor. A set of linear independent control equations are derived that define the operations for utilizing a focal plane figure sensor in the control loops for the positioning of the secondary mirror and for the active control of the primary mirror optical figure. A number of scientific experiments that could be performed with the interferometer are also briefly discussed.

Peters, W. N.↗

Working Papers: Astronomy and Astrophysics Panel Reports

The papers of the panels appointed by the Astronomy and Astrophysics survey Committee are compiled. These papers were advisory to the survey committee and represent the opinions of the members of each panel in the context of their individual charges. The following subject areas are covered: radio astronomy, infrared astronomy, optical/IR from ground, UV-optical from space, interferometry, high energy from space, particle astrophysics, theory and laboratory astrophysics, solar astronomy, planetary astronomy, computing and data processing, policy opportunities, benefits to the nation from astronomy and astrophysics, status of the profession, and science opportunities.

Bahcall, John N.↗

A plan for the development of lunar astronomy

This is a report synthesizing discussions of the Astronomy/Astrophysics Definition Team at the Lunar Science Strategy Workshop for the Exploration and Development of the moon which was held at the NASA Johnson Space Center during August 15-16, 1989. The long-term goal of lunar based astronomy is envisioned as the development of a diverse facility covering all wavelengths of the electromagnetic spectrum. This facility will build on and eventually replace the Great Observatories. The development of optical and infrared interferometry should be a principal activity, optimized by a lunar site. However, lunar observatories should evolve from simple to complex systems and should not and need not make major demands on the limited amount of manpower envisioned for the first 20 years of the lunar outpost.

Sykes, M. V.↗

An optical study of grain formation: Casting and solidification technology (2-IML-1)

By studying the unidirectional growth of a metal-model material in microgravity, an attempt is made to characterize alloy solidification. Using holograms and supporting temperature measurements obtained during processing in the Fluids Experiment System (FES), the solute and thermal fields associated with the dendrite growth front and extraneous nucleation will be measured and compared to a theoretical (computational) model. Ground based supporting experiments include particle tracking to measure the velocity fields, and optical phase shift techniques (confocal optical signal processing, interferometry, and Schlieren) to study thermal and solutal fields.

Mccay, Mary H.↗

Mechanisms of compressive failure in 3D composites

The present study of angle-interlock woven polymer matrix composite behavior under uniaxial monotonic compression notes these materials to be macroscopically ductile, with compressive strains in failure that can exceed 15 percent. Some of the tests conducted on stitched laminates indicated brittle behavior. Woven composite failure mechanisms have been studied by a combination of optical microscopy, moire interferometry, stereoscopy, and digital image comparisons; the critical failure event was in all cases a kink band formation in the primary load-bearing axial rows.

Cox, B. N.↗

Vector formulation for interferogram surface fitting

Interferometry is an optical testing technique that quantifies the optical path difference (OPD) between a reference wave front and a test wave front based on the interference of light. Fringes are formed when the OPD is an integral multiple of the illuminating wavelength. The resultant two-dimensional pattern is called an interferogram. The function of any interferogram analysis program is to extract this OPD and to produce a representation of the test wave front (or surface). This is accomplished through a three-step process of sampling, ordering, and fitting. We develop a generalized linear-algebra vector-notation model of the interferogram sampling and fitting process.

Fischer, David J.↗

Asteroid Spectroscopy: Vesta, the Basaltic Achondrites and Other Differentiated Asteroids

Reflectance spectroscopy, thermal infrared radiometry, optical polarimetry, speckle interferometry, and high-resolution imagery are among the remote sensing techniques applied to Vesta, producing a sophisticated characterization of this object. Reflectance spectroscopy has provided relatively detailed descriptions of the surface mineralogy of Vesta and has provided critical evidence linking Vesta to the basaltic achondrite meteorites.

Gaffey, M. J.↗

Return to the Moon: A New Strategic Evaluation

This paper reviews the value of a new lunar program, initially robotic and eventually manned, in the light of developments since the 1991 Synthesis Group study of the Space Exploration Initiative. The objective is to evaluate a return to the Moon in comparison to proposed Mars programs as a focus for American space exploration with humans in the next century. The Moon is demonstrably accessible, hospitable, useful, and interesting. Lunar programs are inherently faster and less risky from a programmatic viewpoint than comparable Mars programs such as Mars Direct. The dominant reason for a resumption of manned lunar missions, focussed on a single site such as Grimaldi, is to rebuild the infrastructure for missions beyond earth orbit, the last of which was in 1972. A transitional program, corresponding to the 10 Gemini missions that bridged the gap between Mercury and Apollo, was considered absolutely essential by the Synthesis Group. Further justification for a return to the Moon is the demonstrated feasibility of a robotic lunar observatory, concentrating on optical and infrared interferometry. Many unsolved scientific questions about the Moon itself remain, and could be investigated using telerobotic lunar rovers even before the return of humans. Mars is unquestionably more interesting scientifically and far more hospitable for long-term colonization. A new lunar program would be the most effective possible preparation for the human exploration, settlement, and eventually the terraforming of Mars. Lunar and Mars programs are complementary, not competitive. Both can be justified in the most fundamental terms as beginning the dispersal of the human species against uncontrollable natural disasters, cometary or asteroidal impacts in particular, to which mankind is vulnerable while confined to a single planet. Three specific programs are recommended for the 2001-2010 period: Ice Prospectors, to evaluate polar ice or hydrogen deposits; a robotic lunar observatory; and a manned lunar base and observatory.

Lowman, Paul D., Jr.↗

Return to the Moon: A New Strategic Evaluation

This paper reviews the value of a new lunar program, initially robotic and eventually manned, in the light of developments since the 1991 Synthes Group study of the Space Exploration Initiative. The objective is to evaluate a return to the Moon in comparison to proposed Mars programs as a focus for American space exploration with humans in the next century. The Moon is demonstrably accessible, hospitable, useful, and interesting. Lunar programs are inherently faster and less risky from a programmatic viewpoint than comparable Mars programs such as Mars Direct. The dominant reason for a resumption of manned lunar missions, focused on a single site such as Grimaldi, is to rebuild the infrastructure for missions beyond Earth orbit, the last of which was in 1972. A transitional program, corresponding to the 10 Gemini missions that bridged the gap between Mercury and Apollo, was considered absolutely essential by the Synthesis Group. Further justification for a return to the Moon is the demonstrated feasibility of a robotic lunar observatory, concentrating on optical and infrared interferometry. Many unsolved scientific questions about the Moon itself remain, and could be investigated using telerobotic lunar rovers even before the return of humans. Mars is unquestionably more interesting scientifically and far more hospitable for long-term colonization. A new lunar program would be the most effective possible preparation for the human exploration, settlement and eventually the terraforming of Mars. Lunar and Mars programs are complementary, not competitive. Both can be justified in the most fundamental terms as beginning the dispersal of the human species against uncontrollable natural disasters, cometary or asteroidal impacts in particular, to which mankind is vulnerable while confined to a single planet. Three specific programs are recommended for the 2001-2010 period: Ice Prospectors, to evaluate polar ice or hydrogen deposits; a robotic lunar observatory; and a manned lunar base and observatory.

Lowman, Paul D., Jr.↗