SEARCH · Search NASA

Results for “Optimal matching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS2001

High power pumped MID-IR wavelength devices using nonlinear frequency mixing (NFM)

Laser diode pumped mid-IR wavelength sources include at least one high power, near-IR wavelength, injection and/or sources wherein one or both of such sources may be tunable providing a pump wave output beam to a quasi-phase matched (QPM) nonlinear frequency mixing (NFM) device. The NFM device may be a difference frequency mixing (DFM) device or an optical parametric oscillation (OPO) device. Wavelength tuning of at least one of the sources advantageously provides the ability for optimizing pump or injection wavelengths to match the QPM properties of the NFM device enabling a broad range of mid-IR wavelength selectivity. Also, pump powers are gain enhanced by the addition of a rare earth amplifier or oscillator, or a Raman/Brillouin amplifier or oscillator between the high power source and the NFM device. Further, polarization conversion using Raman or Brillouin wavelength shifting is provided to optimize frequency conversion efficiency in the NFM device.

Sanders, Steven↗

DOE OSTI2022

Evaluation of a new DIII-D Doppler backscattering system for higher wavenumber measurement and signal enhancement

The high density fluctuation poloidal wavenumber, k θ (k θ > 8 cm –1 , k θ ρ s > 5, ρs is the ion gyro radius using the ion sound velocity), measurement capability of a new Doppler backscattering (DBS) system at the DIII-D tokamak has been experimentally evaluated. In DBS, wavenumber (k) matching becomes more important at higher wavenumbers, owing to the exponential dependence of the measured signal loss factor on wave vector mismatch. Wave vector matching allows for the Bragg scattering condition to be satisfied, which minimizes the signal loss at higher k’s. In the previous DBS system, without toroidal wave vector matching, the measured DBS signal-to-noise ratio at higher k θ (>8 cm –1 ) is substantially reduced, making it difficult to measure higher k θ turbulence. The new DBS system has been optimized to access higher wavenumber, k θ ≤ 20 cm –1 , density turbulence measurement. The optimization hardware addresses fluctuation wave vector matching using toroidal steering of the launch mirror to produce a backscattered signal with improved intensity. The probe’s sensitivity to high-k density fluctuations has been increased by approximately an order of magnitude compared to the old system that has been in use at DIII-D. Note that typical measurement locations are above or below the tokamak midplane on the low field side with normalized radial ranges of 0.5–1.0. As a result, the new DBS probe system with the toroidal matching of fluctuation wave vectors is thought to be critical to understanding high-k turbulent transport in fusion-relevant research at DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1978

A hybrid technique for wire antennas in a cavity

An evaluation is conducted of two numerical techniques developed by Richmond (1961, 1966) for wire antennas and scattering bodies. It is concluded that a more efficient and accurate scheme can be devised by suitably combining the two techniques. This scheme, which is called the 'hybrid method', is well suited for a wire antenna mounted in a cavity. Reaction matching is employed in the case of the antenna, while point matching is used for the support structure. The described approach makes it possible to consider voltage generators without the use of any equivalent magnetic frill current sources. The number of unknown currents to be determined is essentially optimized by this combination of reaction matching and point matching. The resulting current distribution is a quantized distribution on the support structure and is continuous on the main radiator.

Agrawal, P. K.↗

DOE OSTI2020

Data-driven learning of nonlocal models: from high-fidelity simulations to constitutive laws

We show that machine learning can improve the accuracy of simulations of stress waves in one-dimensional composite materials. We propose a data-driven technique to learn nonlocal constitutive laws for stress wave propagation models. The method is an optimization-based technique in which the nonlocal kernel function is approximated via Bernstein polynomials. The kernel, including both its functional form and parameters, is derived so that when used in a nonlocal solver, it generates solutions that closely match high-fidelity data. The optimal kernel therefore acts as a homogenized nonlocal continuum model that accurately reproduces wave motion in a smaller-scale, more detailed model that can include multiple materials. We apply this technique to wave propagation within a heterogeneous bar with a periodic microstructure. Several one-dimensional numerical tests illustrate the accuracy of our algorithm. The optimal kernel is demonstrated to reproduce high-fidelity data for a composite material in applications that are substantially different from the problems used as training data.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Optimizing structured surfaces for diffractive waveguides

We introduce universal diffractive waveguide designs that can match the performance of conventional dielectric waveguides and achieve various functionalities. Optimized using deep learning, diffractive waveguides can be cascaded to form any desired length and are comprised of transmissive diffractive surfaces that permit the propagation of desired modes with low loss and high mode purity. In addition to guiding the targeted modes through cascaded diffractive units, we also developed various waveguide components and introduced bent diffractive waveguides, rotating the direction of mode propagation, as well as spatial and spectral mode filtering and mode splitting diffractive waveguide designs, and mode-specific polarization control. This framework was experimentally validated in the terahertz spectrum to selectively pass certain spatial modes while rejecting others. Without the need for material dispersion engineering diffractive waveguides can be scaled to operate at different wavelengths, including visible and infrared spectrum, covering potential applications in, e.g., telecommunications, imaging, sensing and spectroscopy.

Applied optics↗

DOE OSTI2021

Anisotropic colloidal interactions & assembly in AC electric fields

In this work, we match experimental and simulated configurations of anisotropic epoxy colloidal particles in high frequency AC electric fields by identifying analytical potentials for dipole-field and dipole-dipole interactions. We report an inverse Monte Carlo simulation algorithm to determine optimal fits of analytical potentials by matching simulated and experimental distribution functions for non-uniform liquid, liquid crystal, and crystal microstructures in varying amplitude electric fields. Two potentials that include accurate particle volume and dimensions along with a concentration dependent prefactor quantitatively capture experimental observations. At low concentrations, an effective ellipsoidal point dipole potential works well, whereas a novel stretched point dipole potential is found to be suitable at all concentrations, field amplitudes, and degrees of ordering. The simplicity, accuracy, and adjustability of the stretched point dipole potential suggest it can be applied to model field mediated microstructures and assembly of systematically varying anisotropic particle shapes.

42 ENGINEERING↗

DOE OSTI2022

Growth Optimization and Device Integration of Narrow‐Bandgap Graphene Nanoribbons

Abstract The electronic, optical, and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom‐up fabrication based on molecular precursors. This approach offers a unique platform for all‐carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, the growth, characterization, and device integration of 5‐atom wide armchair GNRs (5‐AGNRs) are studied, which are expected to have an optimal bandgap as active material in switching devices. 5‐AGNRs are obtained via on‐surface synthesis under ultrahigh vacuum conditions from Br‐ and I‐substituted precursors. It is shown that the use of I‐substituted precursors and the optimization of the initial precursor coverage quintupled the average 5‐AGNR length. This significant length increase allowed the integration of 5‐AGNRs into devices and the realization of the first field‐effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. The study highlights that the optimized growth protocols can successfully bridge between the sub‐nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

36 MATERIALS SCIENCE↗

DOE OSTI2023

SCOMAP-XD : atomistic deuterium contrast matching for small-angle neutron scattering in biology

The contrast-variation method in small-angle neutron scattering (SANS) is a uniquely powerful technique for determining the structure of individual components in biomolecular systems containing regions of different neutron scattering length density ρ . By altering the ρ of the target solute and the solvent through judicious incorporation of deuterium, the scattering of desired solute features can be highlighted. Most contrast-variation methods focus on highlighting specific bulk solute elements, but not on how the scattering at specific scattering vectors q , which are associated with specific structural distances, changes with contrast. Indeed, many systems exhibit q -dependent contrast effects. Here, a method is presented for calculating both bulk contrast-match points and q -dependent contrast using 3D models with explicit solute and solvent atoms and SASSENA , an explicit-atom SANS calculator. The method calculates the bulk contrast-match points within 2.4% solvent D 2 O accuracy for test protein–nucleic acid and lipid nanodisc systems. The method incorporates a general model for the incorporation of deuterium at non-exchangeable sites that was derived by performing mass spectrometry on green fluorescent protein. The method also decomposes the scattering profile into its component parts and identifies structural features that change with contrast. The method is readily applicable to a variety of systems, will expand the understanding of q -dependent contrast matching and will aid in the optimization of next-generation neutron scattering experiments.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Results of the first implementation of RF phase signature matching at LANSCE

The LINAC at the Los Alamos Neutron Science Center (LANSCE) has been utilizing the Delta-t method to match the RF cavities to the design acceleration parameters since its commissioning in 1972. The differences in time-of-flight between two subsequent Beam Position and Phase Monitors (BPPMs) are measured with both accelerated and drifting beams, depending on the whether the module is set to on or off. The algorithm optimizes the module amplitude and phase via iterative measurements if the initial phase is in the vicinity of the design value. With an upgrade to a faster readout system, a scan over the whole RF cavity phase range requires relatively less time than the classical optimization procedure. The Phase Scan Signature Matching (PSSM) method provides a time-efficient method that ensures the phase selection lands on the bunching side and empowers future analyses to build module-specific models. The PSSM also utilizes a direct model to determine the correct amplitude to sub-percent level instead of using linearized matrices. Furthermore, lacking a reliable energy measurement method in the LINAC, we measure the beam phases at two downstream locations to increase the precision of energy measurements. In this letter, we also discuss the sensitivities of PSSM, error propagation, and the implementation results for the 2019 and 2020 beam cycles.

47 OTHER INSTRUMENTATION↗

NASA NTRS2019

Extreme Case of Spectral Band Difference Correction Between the OSIRIS-REX-NAVCAM2 and DSCOVR-EPIC Imagers

Earth-viewed images acquired during a recent asteroid intercept mission present a unique opportunity for radiometric calibration of visible imagers onboard a space exploration probe. Measurements from the CERES consistent DSCOVR-EPIC imager act as a reference in providing spatially, temporally, and angularly matched radiance values for deriving OSIRIS-REx-NavCam sensor calibration gains. The calibration is accomplished using an optimized all-sky tropical ocean ray-matching technique, which employs complex pixel remapping, navigation correction, and angular geometry consideration. Of critical consideration in this specific inter-calibration event is the extreme difference in spectral response function (SRF) width between the NavCam and EPIC imagers, which could cause a rather large bias. The NASA-LaRC SCIAMACHY based online spectral band adjustment factor (SBAF) calculation tool provides an empirical solution to such potential spectral-difference-induced biases through a high spectral- resolution hyper spectral convolution approach. The adjustments produced from this tool can effectively reduce the calibration gain bias of NavCam2 by nearly 6%, thereby adjusting the NavCam2 sensor to within 3.2% of its prelaunch calibration. These results highlight the capability of the SBAF tool to account for exceptionally disparate SRFs.

Scarino, Benjamin↗

NASA NTRS1976

A heuristic finite-state model of the human driver in a car-following situation

An approach to modeling human driver behavior in single-lane car following which is based on a finite-state decision structure is considered. The specific strategy at each point in the decision tree was obtained from observations of typical driver behavior. The synthesis of the decision logic is based on position and velocity thresholds and four states defined by regions in the phase plane. The performance of the resulting assumed intuitively logical model was compared with actual freeway data. The match of the model to the data was optimized by adapting the model parameters using a modified PARTAN algorithm. The results indicate that the heuristic model behavior matches actual car-following performance better during deceleration and constant velocity phases than during acceleration periods.

Burnham, G. O.↗

NASA NTRS1989

Efficient mapping algorithms for scheduling robot inverse dynamics computation on a multiprocessor system

Two efficient mapping algorithms for scheduling the robot inverse dynamics computation consisting of m computational modules with precedence relationship to be executed on a multiprocessor system consisting of p identical homogeneous processors with processor and communication costs to achieve minimum computation time are presented. An objective function is defined in terms of the sum of the processor finishing time and the interprocessor communication time. The minimax optimization is performed on the objective function to obtain the best mapping. This mapping problem can be formulated as a combination of the graph partitioning and the scheduling problems; both have been known to be NP-complete. Thus, to speed up the searching for a solution, two heuristic algorithms were proposed to obtain fast but suboptimal mapping solutions. The first algorithm utilizes the level and the communication intensity of the task modules to construct an ordered priority list of ready modules and the module assignment is performed by a weighted bipartite matching algorithm. For a near-optimal mapping solution, the problem can be solved by the heuristic algorithm with simulated annealing. These proposed optimization algorithms can solve various large-scale problems within a reasonable time. Computer simulations were performed to evaluate and verify the performance and the validity of the proposed mapping algorithms. Finally, experiments for computing the inverse dynamics of a six-jointed PUMA-like manipulator based on the Newton-Euler dynamic equations were implemented on an NCUBE/ten hypercube computer to verify the proposed mapping algorithms. Computer simulation and experimental results are compared and discussed.

Lee, C. S. G.↗

NASA NTRSDate not supplied

Advancement of the General Aviation Synthesis Program Using Python to Enable Optimization-Based Hybrid-Propulsion Aircraft Design

In support of Electrified Powertrain Flight Demonstrator and Advanced Air Transport Technologies programs at NASA, engineers at NASA Ames and NASA Glenn Research Centers have developed a new tool for coupled engine and airframe optimization and analysis. The new tool combines the engineering-level analysis methods of the FORTRAN General Aviation Synthesis Program (GASP) with the OpenMDAO framework to handle highly coupled problems that legacy tools struggle to optimize. The tool has been verified to match GASP with good agreement on a 737 MAX8 baseline vehicle closure problem, and preliminary efforts have been made to integrate the pyCycle thermodynamic cycle analysis tool for electrified engine optimization in the context of a vehicle optimization problem.

Kenneth R. Lyons↗

DOE OSTI2023

Modeling Wavelength Dependent Mid-infrared (5.5–25 μm) Optical Constants of Silicate Glasses: A Genetic Algorithm Approach

Wavelength-dependent mid-infrared (400–1,800 cm -1 ; 5.56–25 μm) optical constants (real and imaginary indices of refraction; n and k) are determined using reflectance spectra at a spectral sampling of 4 cm -1 for several silicate glasses of varying SiO 2 wt% which include (a) basaltic volcanic glass from Kilauea, Hawaii, (b) synthetic andesite, (c) two synthetic dacites, (d) obsidian volcanic glass from Mount Lassen, California, (e) synthetic rhyodacite, and (f) rhyolitic volcanic glass from Mexico. Because glasses are optically isotropic, no specific orientation was required for spectral measurements, and polished glass samples were measured at random orientations using micro-FTIR spectrometer. Lorentz-Lorenz dispersion theory and Fresnel reflectance model for high symmetry materials were used to model the optical constants by optimizing oscillator parameters in modeled spectra to match laboratory spectra. A genetic algorithm (GA) approach automatically finds the natural oscillators and their parameters for each spectrum, and then uses these parameters in a non-linear least squares optimization routine. The study compared spectral parameters such as Christiansen feature, reststrahlen bands (RBs), and the peaks centered around 860–1,100 (peak 1) and 400–480 cm -1 (peak 2) of n and k to their respective SiO 2 wt% of the glasses. CF, RBs, peak 1 of n and k, and peak 2 of n shift to higher wavenumbers with increased SiO 2 wt%, whereas peak 2 of k shifts to lower wavenumbers with increased SiO 2 wt%. Derived optical constants of these glasses will improve quantitative abundance mapping of volcanic materials on the surfaces of silicate targets in the Solar System.

58 GEOSCIENCES↗

NASA NTRS1984

Structural synthesis: Precursor and catalyst

More than twenty five years have elapsed since it was recognized that a rather general class of structural design optimization tasks could be properly posed as an inequality constrained minimization problem. It is suggested that, independent of primary discipline area, it will be useful to think about: (1) posing design problems in terms of an objective function and inequality constraints; (2) generating design oriented approximate analysis methods (giving special attention to behavior sensitivity analysis); (3) distinguishing between decisions that lead to an analysis model and those that lead to a design model; (4) finding ways to generate a sequence of approximate design optimization problems that capture the essential characteristics of the primary problem, while still having an explicit algebraic form that is matched to one or more of the established optimization algorithms; (5) examining the potential of optimum design sensitivity analysis to facilitate quantitative trade-off studies as well as participation in multilevel design activities. It should be kept in mind that multilevel methods are inherently well suited to a parallel mode of operation in computer terms or to a division of labor between task groups in organizational terms. Based on structural experience with multilevel methods general guidelines are suggested.

Schmit, L. A.↗

NASA NTRS1987

Development of a stereo analysis algorithm for generating topographic maps using interactive techniques of the MPP

A local area matching algorithm was developed on the Massively Parallel Processor (MPP). It is an iterative technique that first matches coarse or low resolution areas and at each iteration performs matches of higher resolution. Results so far show that when good matches are possible in the two images, the MPP algorithm matches corresponding areas as well as a human observer. To aid in developing this algorithm, a control or shell program was developed for the MPP that allows interactive experimentation with various parameters and procedures to be used in the matching process. (This would not be possible without the high speed of the MPP). With the system, optimal techniques can be developed for different types of matching problems.

Strong, James P.↗

DOE OSTI2020

Deterministic incident-wave elevation prediction in intermediate water depth

Potential performance gains from optimal (non-causal) impedance-matching control of wave energy devices in irregular ocean waves are dependent on deterministic wave elevation prediction techniques that work well in practical applications. Although a number of devices are designed for operation in intermediate water depths, little work has been reported on deterministic wave prediction in such depths. Here, we investigated a deterministic wave-prediction technique based on an approximate propagation model that leads to an analytical formulation, which may be convenient to implement in practice. To improve accuracy, an approach to combine predictions based on multiple up-wave measurement points is evaluated. The overall method is tested using experimental time-series measurements recorded in the U.S. Navy MASK basin in Carderock, MD, USA. For comparison, an alternative prediction approach based on Fourier coefficients is also tested with the same data. Comparison of prediction approaches with direct measurements suggest room for improvement. Possible sources of error including tank reflections are estimated, and potential mitigation approaches are discussed.

16 TIDAL AND WAVE POWER↗

DOE OSTI2025

Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation

Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.

Intense electronic excitation↗