SEARCH · Search NASA

Results for “Orbit Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Cryogenic gear technology for an orbital transfer vehicle engine and tester design

Technology available for gears used in advanced Orbital Transfer Vehicle rocket engines and the design of a cryogenic adapted tester used for evaluating advanced gears are presented. The only high-speed, unlubricated gears currently in cryogenic service are used in the RL10 rocket engine turbomachinery. Advanced rocket engine gear systems experience operational load conditions and rotational speed that are beyond current experience levels. The work under this task consisted of a technology assessment and requirements definition followed by design of a self-contained portable cryogenic adapted gear test rig system.

Calandra, M.↗

NASA NTRS1988

Orbital transfer vehicle 3000 LBF thrust chamber assembly hot fire test program

The Aerojet Orbital Transfer Vehicle (OTV) Thrust Chamber Assembly (TCA) concept consists of a hydrogen cooled chamber, and annular injector, and an oxygen cooled centerbody. The hot fire testing of a heat sink version of the chamber with only the throat section using hydrogen cooling is documented. Hydraulic performance of the injector and cooled throat were verified by water flow testing prior to TCA assembly. The cooled throat was proof tested to 3000 psia to verify the integrity of the codeposited EF nickel-cobalt closeout. The first set of hot fire tests were conducted with a heat sink throat to obtain heat flux information. After demonstration of acceptable heat fluxes, the heat sink throat was replaced with the LH2 cooled throat section. Fourteen tests were conducted with a heat sink chamber and throat at chamber pressures of 85 to 359 psia. The injector face was modified at this time to add more face coolant flow. Ten tests were then conducted at chamber pressures of 197 to 620 psia. Actual heat fluxes at the higher chamber pressure range were 23 percent higher than the average of 10 Btu/in 2 predicted.

Schneider, Judy↗

NASA NTRS1988

Superfluid Helium On-Orbit Transfer Flight Experiment - Performance estimates

Several components on the Superfluid Helium On-Orbit Transfer Flight Experiment are analyzed with respect to expected performance. The interaction of the components is then used to calculate an expected transfer efficiency. Steady state conditions are assumed. Transfer efficiencies based on the thermomechanical pump range from 96 to 99 percent plus. Transfer line parasitics lead to lower efficiencies at low flow rates.

Dipirro, M. J.↗

NASA NTRS1992

Analytic orbit plane targeting for orbit transfers about an oblate planet

This paper develops closed-form expressions which accurately model variations in orbital inclination and longitude of the ascending node due to the influence of the J2 oblateness perturbation. These analytic expressions are particularly useful in defining perturbed orbit transfer planes which naturally regress into the target intercept position for Lambert-type transfers and in compensating for differential nodal regression between two orbiting vehicles in rendezvous targeting problems. Results of example problems for each of these scenarios demonstrate that they accurately compensate for these oblateness effects.

Mchenry, R. L.↗

NASA NTRS1984

Space Station based operations and maintenance support to spacecraft, platforms, and orbit transfer vehicle (OTV)

The orbital servicing concepts developed for several existing and planned spacecraft are reviewed to illustrate the evolution and capabilities of Shuttle-based support services, and the potential range of future services are categorized by several criteria including transportation systems requirements, supporting facilities and equipment options, and servicing locations. Implications of Space Station-basing the services are described, along with possible implementing systems. In particular, the technique of 'formation flying' by means of which spacecraft may be physically isolated from each other while maintaining reasonable propellant requirements for maneuvers between them is explored by representative examples. OTV mission support is described as an evolutionary augmentation of the basic Space Station services.

Steincamp, J. W.↗

NASA NTRS1984

Multiple-pass trajectories for an aeroassisted orbital transfer vehicle

This paper investigates the use of multiple-pass trajectories for aeroassisted orbital transfer vehicles (AOTV) as a means of reducing the severe aeroheating environment and the extreme sensitivity to off-nominal trajectory and atmospheric conditions. One-, two-, and three-pass trajectories were calculated for AOTV's with ballistic coefficients ranging from 5 to 150 psf. Compared to the single-pass case, the maximum heat rate was reduced by 30 percent for two passes and 45 percent for three passes, while the maximum acceleration was reduced by 40 percent and 55 percent, respectively. The sensitivity of the trajectories to variations in atmospheric and orbital parameters was not significantly reduced.

Rehder, J. J.↗

NASA NTRS1980

Analysis of GaAs and Si solar cell arrays for earth orbital and orbit transfer missions

Silicon and gallium arsenide arrays were studied and compared for low earth orbit (LE), geosynchronous orbit (GEO), and LEO to GEO electric propulsion orbit transfer missions. The sensitivities of total cost to parameters such as mission duration, array cost, cover glass thickness, and concentration ratio were determined along with cost tradeoffs between silicon and gallium arsenide arrays for selected mission classes. Results indicate that development of the technology for low cost, light weight concentrators should be increased and that cost reduction efforts for gallium arsenide cells be pursued.

Jeffries, K. D.↗

NASA NTRS1985

Computational chemistry and aeroassisted orbital transfer vehicles

An analysis of the radiative heating phenomena encountered during a typical aeroassisted orbital transfer vehicle (AOTV) trajectory was made to determine the potential impact of computational chemistry on AOTV design technology. Both equilibrium and nonequilibrium radiation mechanisms were considered. This analysis showed that computational chemistry can be used to predict (1) radiative intensity factors and spectroscopic data; (2) the excitation rates of both atoms and molecules; (3) high-temperature reaction rate constants for metathesis and charge exchange reactions; (4) particle ionization and neutralization rates and cross sections; and (5) spectral line widths.

Cooper, D. M.↗

NASA NTRS1989

Optimal orbit transfer suitable for large flexible structures

The problem of continuous low-thrust planar orbit transfer of large flexible structures is formulated as an optimal control problem with terminal state constraints. The dynamics of the spacecraft motion are treated as a point-mass central force field problem; the thrust-acceleration magnitude is treated as an additional state variable; and the rate of change of thrust-acceleration is treated as a control variable. To ensure smooth transfer, essential for flexible structures, an additional quadratic term is appended to the time cost functional. This term penalizes any abrupt change in acceleration. Numerical results are presented for the special case of a planar transfer.

Chatterjee, Alok K.↗

NASA NTRS1994

The 7.5K lbf thrust engine preliminary design for Orbit Transfer Vehicle

This document summarizes the preliminary design of the Aerojet version of the Orbit Transfer Vehicle main engine. The concept of a 7500 lbf thrust LO2/GH2 engine using the dual expander cycle for optimum efficiency is validated through power balance and thermal calculations. The engine is capable of 10:1 throttling from a nominal 2000 psia to a 200 psia chamber pressure. Reservations are detailed on the feasibility of a tank head start, but the design incorporates low speed turbopumps to mitigate the problem. The mechanically separate high speed turbopumps use hydrostatic bearings to meet engine life requirements, and operate at sub-critical speed for better throttling ability. All components were successfully packaged in the restricted envelope set by the clearances for the extendible/retractable nozzle. Gimbal design uses an innovative primary and engine out gimbal system to meet the +/- 20 deg gimbal requirement. The hydrogen regenerator and LOX/GH2 heat exchanger uses the Aerojet platelet structures approach for a highly compact component design. The extendible/retractable nozzle assembly uses an electric motor driven jack-screw design and a one segment carbon-carbon or silicide coated columbium nozzle with an area ratio, when extended, of 1430:1. A reliability analysis and risk assessment concludes the report.

Hayden, Warren R.↗

NASA NTRS2019

Efficient computation of optimal low thrust gravity perturbed orbit transfers

We have developed a new method for solving low-thrust fuel-optimal orbit transfer problems in the vicinity of a large body (planet or asteroid), considering a high-fidelity spherical harmonic gravity model. The algorithm is formulated via the indirect optimization method, leading to a two-point boundary value problem (TPBVP). We make use of a hyperbolic tangent smoothing law for performing continuation on the thrust magnitude to reduce the sharpness of the control switches in early iterations and thus promote convergence. The TPBVP is solved using the method of particular solutions (MPS) shooting method and Picard-Chebyshev numerical integration. Application of Picard-Chebyshev integration affords an avenue for increased efficiency that is not available with step-by-step integrators. We demonstrate that computing the particular solutions with only a low-fidelity force model greatly increases the efficiency of the algorithm while ultimately achieving near machine precision accuracy. A salient feature of the MPS is that it is parallelizable, and thus further speedups are available. It is also shown that, for near Earth orbits and over a small number of en-route revolutions around the Earth, only the zonal perturbation terms are required in the costate equations to obtain a solution that is accurate to machine precision and optimal to engineering precision. The proposed framework can be used for trajectory design around small asteroids and also for orbit debris rendezvous and removal tasks.

Junkins, John L.↗

NASA NTRS1981

Optimal orbital transfers and prime rib curves for mission design

Battin's work on optimal one impulse transfers from circular orbits is extended. Optimal one impulse trajectories from orbits of arbitrary eccentricity through a specified point are determined. This work is then further extended to optimal two impulse transfers between massive planets. Curves derived using this technique are presented showing flyby and rendezvous Delta V requirements for all combinations of launch and arrival true anomalies. Similar curves for times of flight corresponding to the trajectories with minimum total Delta V are derived using Lambert's methods. Possible further extension of these techniques are outlined. The use of these curves for mission design is presented in a companion paper by Hulkower and Ross (1971).

Ross, D. J.↗

NASA NTRS1981

Manned orbit transfer vehicles and their missions

From a study that identified over 100 possible geosynchronous orbit-related applications for manned orbit transfer vehicles (MOTV), a group of 20 are chosen for consideration. These generic missions can be grouped into five categories: (1) inspection service and repair, (2) operation of large systems, (3) debris removal, (4) construction, and (5) unmanned cargo. Among the findings of this study is that space basing permits more efficient use of Space Shuttle flights, since the core propulsion system, crew cabin and general purpose mission hardware need not be launched into space each time. A conservative traffic model shows that $600 million may be saved over five years by space basing, due to the decreased number of Shuttle flights needed to support the space-based MOTV. Crew information, payloads, characteristics of the vehicle, and mission requirements are covered in detail.

Boyland, R. E.↗

NASA NTRS1982

Comment on 'Time-optimal orbit transfer trajectory for solar sail spacecraft'

An analytic proof is presented to show that the orbital transfer times of an earth-to-Mars solar-sail propelled spacecraft trajectory as calculated by Jayaraman (1980) are incorrect. In particular, different boundary conditions are defined, which indicate that a minimization of the Hamiltonian, which Jayaraman used, can yield the wrong stationary solution. Transfer times are calculated using a neighboring extremal algorithm based on numerical differentiation in conjunction with Krogh's variable order, variable step size integrator, resulting in a transfer time of 322 days at 2 mm/sec-sq, with endpoint restraints satisfied to within 1/1 billion. Finally, it is concluded that minimization of flight time is secondary in importance to maximization of delivered payload and minimization of overall mission cost and risk.

Wood, L. J.↗

NASA NTRS1988

Two designs for an orbital transfer vehicle: A comparison of two OTVs

The basic components of the design for the orbital transfer vehicle (OTV) are outlined. The Project Orion and the MOVERS OTV design are compared. The nature of the work and the specifics will be reviewed. The propellant systems are summarized along with the dollar savings. The strengths and weaknesses are highlighted for each OTV.

Source record↗

NASA NTRS1989

Fuel-optimal trajectories of aeroassisted orbital transfer with plane change

The problem of minimization of fuel consumption during the atmospheric portion of an aeroassisted, orbital transfer with plane change is addressed. The complete mission has required three characteristic velocities, a deorbit impulse at high earth orbit (HEO), a boost impulse at the atmospheric exit, and a reorbit impulse at low earth orbit (LEO). A performance index has been formulated as the sum of these three impulses. Application of optimal control principles has led to a nonlinear, two-point, boundary value problem which was solved by using a multiple shooting algorithm. The strategy for the atmospheric portion of the minimum-fuel transfer is to start initially with the maximum positive lift in order to recover from the downward plunge, and then to fly with a gradually decreasing lift such that the vehicle skips out of the atmosphere with a flight path angle near zero degrees.

Naidu, Desineni Subbaramaiah↗

NASA NTRS1989

Fuel-optimal trajectories of aeroassisted orbital transfer with plane change

Naidu, D. S.↗

NASA NTRS1987

Thermodynamic analysis and subscale modeling of space-based orbit transfer vehicle cryogenic propellant resupply

The resupply of the cryogenic propellants is an enabling technology for spacebased orbit transfer vehicles. As part of the NASA Lewis ongoing efforts in microgravity fluid management, thermodynamic analysis and subscale modeling techniques were developed to support an on-orbit test bed for cryogenic fluid management technologies. Analytical results have shown that subscale experimental modeling of liquid resupply can be used to validate analytical models when the appropriate target temperature is selected to relate the model to its prototype system. Further analyses were used to develop a thermodynamic model of the tank chilldown process which is required prior to the no-vent fill operation. These efforts were incorporated into two FORTRAN programs which were used to present preliminary analyticl results.

Defelice, David M.↗