Search NASA⌕ Search

SEARCH · Search NASA

Results for “Outer approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Effect of stellar encounters on comet cloud formation

We have investigated the effect of stellar encounters on the formation and disruption of the Oort cloud using the classical impulse approximation. We calculate the evolution of a planetesimal disk into a spherical Oort cloud due to the perturbation from passing stars for 10 Gyr. We obtain the empirical fits of the e-folding time for the number of Oort cloud comets using the standard exponential and Kohlrausch formulae as functions of the stellar parameters and the initial semimajor axes of planetesimals. The e-folding time and the evolution timescales of the orbital elements are also analytically derived. In some calculations, the effect of the Galactic tide is additionally considered. We also show the radial variations of the e-folding times to the Oort cloud. From these timescales, we show that if the initial planetesimal disk has the semimajor axes distribution dn/da∝a{sup −2}, which is produced by planetary scattering, the e-folding time for planetesimals in the Oort cloud is ∼10 Gyr at any heliocentric distance r. This uniform e-folding time over the Oort cloud means that the supply of comets from the inner Oort cloud to the outer Oort cloud is sufficiently effective to keep the comet distribution as dn/dr∝r{sup −2}. We also show that the final distribution of the semimajor axes in the Oort cloud is approximately proportional to a{sup −2} for any initial distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser absorption and third-harmonic generation in free-electron nanofilms

The collective collisionless dynamics of the electron gas in free-electron nanofilms irradiated by an obliquely incident p-polarized laser wave are considered in the classical hydrodynamic and jellium-model approximations. The two cases of cold metallic nanofilms and hot free-electron nanofilms laser ionized and laser heated by a pump-laser prepulse are investigated with proper electron statistics. Both linear and nonlinear properties of the plasma resonance excitation in the nanofilms are studied in detail for different film parameters (film thickness, thickness of the diffuse film boundary, outer-ionization degree for hot laser-ionized/heated films, etc.). The significant role of the diffuse film boundaries for both linear absorption of the laser field and third-harmonic generation is demonstrated. For this goal, we do not use the standard dielectric-permittivity approach with boundary conditions between two different media but solve continuously over all space the full set of hydrodynamic and electrodynamic equations in nonrelativistic one-dimensional approximation. It is shown that collisionless edge absorption may be dominant in thin nanofilms, while in cold metal nanofilms it results in the appearance of several linear-absorption resonances below the bulk-plasma resonance frequency. For hot nanofilms, drastic broadening of the linear-plasma-resonance profile is obtained in calculations when the film thickness is reduced. In our model, the third-harmonic generation is determined by the density gradient in the diffuse film edges. Additional resonances in third-harmonic generation as a function of laser frequency are obtained for cold metal nanofilms. They differ from the standard third-order nonlinear resonance, which is located at one third of the plasma resonance frequency. The important role of the outer-ionization degree in forming the third-order nonlinear response of the hot laser-ionized film is also analyzed and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ 3‐D mapping of pore structures and hollow grains of interplanetary dust particles with phase contrast X‐ray nanotomography

Abstract Unlocking the 3‐D structure and properties of intact chondritic porous interplanetary dust particles ( IDP s) in nanoscale detail is challenging, which is also complicated by atmospheric entry heating, but is important for advancing our understanding of the formation and origins of IDP s and planetary bodies as well as dust and ice agglomeration in the outer protoplanetary disk. Here, we show that indigenous pores, pristine grains, and thermal alteration products throughout intact particles can be noninvasively visualized and distinguished morphologically and microstructurally in 3‐D detail down to ~10 nm by exploiting phase contrast X‐ray nanotomography. We have uncovered the surprisingly intricate, submicron, and nanoscale pore structures of a ~10‐μm‐long porous IDP , consisting of two types of voids that are interconnected in 3‐D space. One is morphologically primitive and mostly submicron‐sized intergranular voids that are ubiquitous; the other is morphologically advanced and well‐defined intragranular nanoholes that run through the approximate centers of ~0.3 μm or lower submicron hollow grains. The distinct hollow grains exhibit complex 3‐D morphologies but in 2‐D projections resemble typical organic hollow globules observed by transmission electron microscopy. The particle, with its outer region characterized by rough vesicular structures due to thermal alteration, has turned out to be an inherently fragile and intricately submicron‐ and nanoporous aggregate of the sub‐μm grains or grain clumps that are delicately bound together frequently with little grain‐to‐grain contact in 3‐D space.

Hu, Z. W.↗

A Measure Approximation for Distributionally Robust PDE-Constrained Optimization Problems

In numerous applications, scientists and engineers acquire varied forms of data that partially characterize the inputs to an underlying physical system. This data is then used to inform decisions such as controls and designs. Consequently, it is critical that the resulting control or design is robust to the inherent uncertainties associated with the unknown probabilistic characterization of the model inputs. Here in this work, we consider optimal control and design problems constrained by partial differential equations with uncertain inputs. We do not assume a known probabilistic model for the inputs, but rather we formulate the problem as a distributionally robust optimization problem where the outer minimization problem determines the control or design, while the inner maximization problem determines the worst-case probability measure that matches desired characteristics of the data. We analyze the inner maximization problem in the space of measures and introduce a novel measure approximation technique, based on the approximation of continuous functions, to discretize the unknown probability measure. Finally, we prove consistency of our approximated min-max problem and conclude with numerical results.

54 ENVIRONMENTAL SCIENCES↗

WHICH RADIAL VELOCITY EXOPLANETS HAVE UNDETECTED OUTER COMPANIONS?

The observed radial velocity (RV) eccentricity distribution for extrasolar planets in single-planet systems shows that a significant fraction of planets are eccentric (e > 0.1). However, an RV planet's eccentricity, which comes from the Keplerian fitting, can be biased by low signal-to-noise ratio and poor sampling. Here, we investigate the effects on eccentricity produced by undetected outer companions. We have carried out Monte Carlo simulations of mock RV data to understand this effect and predict its impact on the observed distribution. We first quantify the statistical bias of known RV planets' eccentricities produced by undetected zero-eccentricity wide-separation companions and show that this effect alone cannot explain the observed distribution. We then modify the simulations to consist of two populations, one of zero-eccentricity planets in double-planet systems and the other of single planets drawn from an eccentric distribution. Our simulations show that a good fit to the observed distribution is obtained with 45% zero-eccentricity double planets and 55% single eccentric planets. Assuming that our two simulated populations of planets are a good approximation for the true RV population, matching the observed distribution allows us to determine the probability that a known RV planet's orbital eccentricity has been biased by an undetected wide-separation companion. Averaged over eccentricity we calculate this probability to be {approx}4%, suggesting that a small fraction of systems may have a yet to be discovered outer companion. Our simulations show that moderately eccentric planets, with 0.1 < e < 0.3 and 0.1 < e < 0.2, have a {approx}13% and {approx}19% probability, respectively, of having an undetected outer companion. We encourage both high-contrast direct imaging and RV follow-up surveys of known RV planets with moderate eccentricities to test our predictions and look for previously undetected outer companions.

79 ASTRONOMY AND ASTROPHYSICS↗

KEPLER-18b, c, AND d: A SYSTEM OF THREE PLANETS CONFIRMED BY TRANSIT TIMING VARIATIONS, LIGHT CURVE VALIDATION, WARM-SPITZER PHOTOMETRY, AND RADIAL VELOCITY MEASUREMENTS

We report the detection of three transiting planets around a Sun-like star, which we designate Kepler-18. The transit signals were detected in photometric data from the Kepler satellite, and were confirmed to arise from planets using a combination of large transit-timing variations (TTVs), radial velocity variations, Warm-Spitzer observations, and statistical analysis of false-positive probabilities. The Kepler-18 star has a mass of 0.97 M{sub sun}, a radius of 1.1 R{sub sun}, an effective temperature of 5345 K, and an iron abundance of [Fe/H] = +0.19. The planets have orbital periods of approximately 3.5, 7.6, and 14.9 days. The innermost planet 'b' is a 'super-Earth' with a mass of 6.9 {+-} 3.4 M{sub +}, a radius of 2.00 {+-} 0.10 R{sub +}, and a mean density of 4.9 {+-} 2.4 g cm{sup 3}. The two outer planets 'c' and 'd' are both low-density Neptune-mass planets. Kepler-18c has a mass of 17.3 {+-} 1.9 M{sub +}, a radius of 5.49 {+-} 0.26 R{sub +}, and a mean density of 0.59 {+-} 0.07 g cm{sup 3}, while Kepler-18d has a mass of 16.4 {+-} 1.4 M{sub +}, a radius of 6.98 {+-} 0.33 R{sub +} and a mean density of 0.27 {+-} 0.03 g cm{sup 3}. Kepler-18c and Kepler-18d have orbital periods near a 2:1 mean-motion resonance, leading to large and readily detected TTVs.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTI-SCALE MODELING AND APPROXIMATION ASSISTED OPTIMIZATION OF BARE TUBE HEAT EXCHANGERS

Air-to-refrigerant heat exchangers are very common in air-conditioning, heat pump and refrigeration applications. In these heat exchangers, there is a great benefit in terms of size, weight, refrigerant charge and heat transfer coefficient, by moving from conventional channel sizes (~ 9mm) to smaller channel sizes (< 5mm). This work investigates new designs for air-to-refrigerant heat exchangers with tube outer diameter ranging from 0.5 to 2.0mm. The goal of this research is to develop and optimize the design of these heat exchangers and compare their performance with existing state of the art designs. The air-side performance of various tube bundle configurations are analyzed using a Parallel Parameterized CFD (PPCFD) technique. PPCFD allows for fast-parametric CFD analyses of various geometries with topology change. Approximation techniques drastically reduce the number of CFD evaluations required during optimization. Maximum Entropy Design method is used for sampling and Kriging method is used for metamodeling. Metamodels are developed for the air-side heat transfer coefficients and pressure drop as a function of tube-bundle dimensions and air velocity. The metamodels are then integrated with an air-to-refrigerant heat exchanger design code. This integration allows a multi-scale analysis of air-side performance heat exchangers including air-to-refrigerant heat transfer and phase change. Overall optimization is carried out using a multi-objective genetic algorithm. The optimal designs found can exhibit 50 percent size reduction, 75 percent decrease in air side pressure drop and doubled air heat transfer coefficients compared to a high performance compact micro channel heat exchanger with same capacity and flow rates.

CFD↗

Characterizing the seismic response of a molten salt nuclear reactor

Abstract One Generation IV nuclear reactor, which uses a fluoride salt as a coolant, graphite reflector blocks as a moderator, and circulating buoyant TRISO pebbles as fuel is at an advanced stage of development. To characterize the seismic behavior of components of this reactor, validate numerical models for analysis, and develop recommendations for design, a set of earthquake‐simulator experiments on a scaled model of the reactor vessel and its internals was executed on a six‐degree‐of‐freedom earthquake simulator. The model was seismically isolated at its base using two types of spherical sliding bearings. The scaled model involved representations of the prototype reactor vessel, core barrel, reflector blocks, coolant, and spherical fuel pebbles. The material and geometric properties of different test components were selected based on a dynamic similitude scaling analysis and an approximate length scale of 0.4. Four sets of three‐component earthquake motions were used as inputs for testing. Instrumentation on the test specimen recorded the dynamic responses of the outer vessel, core barrel, and reflector‐block assembly, the hydrodynamic responses (sloshing and hydrodynamic pressure) of the liquid coolant, pebble consolidation under earthquake shaking, and the behavior of the isolation systems. This paper describes the design of the experiments and presents key results from the tests. The dynamic responses of the outer vessel, core barrel, and the reflector blocks revealed that the components responded as a unit for the intense shaking used in the experiments. The sloshing response of the fluid in a thin annulus near the perimeter of the vessel was heavily damped. The change in the packing fraction of the pebble bed under repeated, intense 3D earthquake shaking was less than 3%. Seismically isolating the vessel substantially reduced demands on its internal components.

Engineering↗

Structural features of transversal barrier in central channel of nuclear pore complex

The most important entity of the selective behavior of the nuclear pore complex (NPC) is considered to be the matter called 'barrier,' 'meshwork' or 'sieve.' This part of NPC has not been well elucidated by using electron microscopy methods to date. In the present study, we demonstrated the presence of a coherent transversal barrier in the central channel of NPC, using high resolution transmission electron microscopy. It was found that the barrier is located in the middle of the central channel, i.e. at the level where the outer and inner nuclear membranes fuse. The thickness of this layer is evidently different in various NPCs and usually varies between 20 and 30 nm and its diameter is approximately 40 nm. The cytoplasmic and nuclear surfaces of the barrier are roughly parallel and plane. Moreover we suggest that the barrier may not be interrupted by any channel(s), at least not with a diameter above 10 nm. Further various appearances of the central channel with different particles were observed, presumably cargos and karyopherins captured in transit. A different type of central channel barrier with lipid bilayer membrane-like appearance is also discussed. Highlights: Black-Right-Pointing-Pointer The meshwork in the central channel of nuclear pore complex is visualized. Black-Right-Pointing-Pointer This 'barrier' shows different thickness (from 20 nm to 30 nm) in different pores. Black-Right-Pointing-Pointer Cytoplasmic and nuclear surfaces of this barrier are roughly parallel and plane. Black-Right-Pointing-Pointer The barrier is not interrupted by any visible channel(s).

60 APPLIED LIFE SCIENCES↗

Direct stellarator coil optimization for nested magnetic surfaces with precise quasi-symmetry

We present a robust optimization algorithm for the design of electromagnetic coils that generate vacuum magnetic fields with nested flux surfaces and precise quasi-symmetry. The method is based on a bilevel optimization problem, where the outer coil optimization is constrained by a set of inner least squares optimization problems whose solutions describe magnetic surfaces. The outer optimization objective targets coils that generate a field with nested magnetic surfaces and good quasi-symmetry. The inner optimization problems identify magnetic surfaces when they exist, and approximate surfaces in the presence of magnetic islands or chaos. We show that this formulation can be used to heal islands and chaos, thus producing coils that result in magnetic fields with precise quasi-symmetry. We show that the method can be initialized with coils from the traditional two-stage coil design process, as well as coils from a near-axis expansion optimization. We present a numerical example where island chains are healed and quasi-symmetry is optimized up to surfaces with aspect ratio 6. Another numerical example illustrates that the aspect ratio of nested flux surfaces with optimized quasi-symmetry can be decreased from 6 to approximately 4. In conclusion, the last example shows that our approach is robust and a cold-start using coils from a near-axis expansion optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cost estimation inputs for spent nuclear fuel geologic disposal concepts (Revision 1)

A set of 16 geologic disposal concepts is described in sufficient detail for rough-order-of-magnitude repository cost estimates, for disposal of spent nuclear reactor fuel in generic crystalline, argillaceous, and salt host geologic media. The description includes total length, diameter, and volume for all underground shafts, ramps, drifts and large-diameter borings. Basic types of ground support are specified. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel, but concepts are described in terms of modular panels each containing 10,000 MT. Waste packaging is described, and the materials and outer dimensions for disposal overpacks are given. The manner of emplacement is specified, with any additional fixturing, lining, buffer materials, and backfill needed. Thermal limits for waste package emplacement or repository closure are given, as appropriate for enclosed and open emplacement modes, respectively. The 16 disposal concepts are based on disposal concept studies performed for the Used Fuel Disposition R&D program between 2011 and 2014, and the accompanying engineering analyses. Revision 1 results from review and checking of repository spacings, drift length estimates, repository plan area estimates, closure power limits, and estimates of fuel age at closure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cost Estimation Inputs for Spent Nuclear Fuel Geologic Disposal Concepts

A set of 16 geologic disposal concepts is described in sufficient detail for rough-order-of-magnitude repository cost estimates, for disposal of spent nuclear reactor fuel in generic crystalline, argillaceous, and salt host geologic media. The description includes total length, diameter, and volume for all underground shafts, ramps, drifts and large-diameter borings. Basic types of ground support are specified. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel, but concepts are described in terms of modular panels each containing 10,000 MT. Waste packaging is described, and the materials and outer dimensions for disposal overpacks are given. The manner of emplacement is specified, with any additional fixturing, lining, buffer materials, and backfill needed. Thermal limits for waste package emplacement or repository closure are given, as appropriate for enclosed and open emplacement modes, respectively. The 16 disposal concepts are based on disposal concept studies performed for the Used Fuel Disposition R&D program between 2011 and 2014, and the accompanying engineering analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nucleosynthesis of an 11.8 M ⊙ Supernova with 3D Simulation of the Inner Ejecta: Overall Yields and Implications for Short-lived Radionuclides in the Early Solar System

Based on a 3D supernova simulation of an 11.8 M ⊙ progenitor model with an initial solar composition, we study the nucleosynthesis using tracers covering the innermost 0.1 M ⊙ of the ejecta. These ejecta are mostly proton-rich and contribute significant amounts of 45 Sc and 64 Zn. The production of heavier isotopes is sensitive to the electron fraction and hence the neutrino emission from the proto-neutron star. The yields of these isotopes are rather uncertain due to the approximate neutrino transport used in the simulation. In order to obtain the total yields for the whole supernova, we combine the results from the tracers with those for the outer layers from a suitable 1D model. Using the yields of short-lived radionuclides (SLRs), we explore the possibility that an 11.8 M ⊙ supernova might have triggered the formation of the solar system and provided some of the SLRs measured in meteorites. In particular, we discuss two new scenarios that can account for at least the data on 41 Ca, 53 Mn, and 60 Fe without exceeding those on the other SLRs.

Astronomy & Astrophysics↗

Structural and orientation effects on electronic energy transfer between silicon quantum dots with dopants and with silver adsorbates

Starting from the atomic structure of silicon quantum dots (QDs), and utilizing ab initio electronic structure calculations within the Förster resonance energy transfer (FRET) treatment, a model has been developed to characterize electronic excitation energy transfer between QDs. Electronic energy transfer rates, K{sub EET}, between selected identical pairs of crystalline silicon quantum dots systems, either bare, doped with Al or P, or adsorbed with Ag and Ag{sub 3}, have been calculated and analyzed to extend previous work on light absorption by QDs. The effects of their size and relative orientation on energy transfer rates for each system have also been considered. Using time-dependent density functional theory and the hybrid functional HSE06, the FRET treatment was employed to model electronic energy transfer rates within the dipole-dipole interaction approximation. Calculations with adsorbed Ag show that: (a) addition of Ag increases rates up to 100 times, (b) addition of Ag{sub 3} increases rates up to 1000 times, (c) collinear alignment of permanent dipoles increases transfer rates by an order of magnitude compared to parallel orientation, and (d) smaller QD-size increases transfer due to greater electronic orbitals overlap. Calculations with dopants show that: (a) p-type and n-type dopants enhance energy transfer up to two orders of magnitude, (b) surface-doping with P and center-doping with Al show the greatest rates, and (c) K{sub EET} is largest for collinear permanent dipoles when the dopant is on the outer surface and for parallel permanent dipoles when the dopant is inside the QD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of laser spot shapes on polar-direct-drive implosions on the National Ignition Facility

Ongoing polar-direct-drive (PDD) implosions on the National Ignition Facility (NIF) [J. D. Lindl and E. I. Moses, Phys. Plasmas 18, 050901 (2011)] use existing NIF hardware, including indirect-drive phase plates. This limits the performance achievable in these implosions. Spot shapes are identified that significantly improve the uniformity of PDD NIF implosions; outer surface deviation is reduced by a factor of 7 at the end of the laser pulse and hot-spot distortion is reduced by a factor of 2 when the shell has converged by a factor of ∼10. As a result, the neutron yield increases by approximately a factor of 2. This set of laser spot shapes is a combination of circular and elliptical spots, along with elliptical spot shapes modulated by an additional higher-intensity ellipse offset from the center of the beam. This combination is motivated in this paper. It is also found that this improved implosion uniformity is obtained independent of the heat conduction model. This work indicates that significant improvement in performance can be obtained robustly with the proposed spot shapes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ANISOTROPY OF TeV COSMIC RAYS AND OUTER HELIOSPHERIC BOUNDARIES

Cosmic rays in the energy range from about tens of GeV to several hundreds of TeV are observed on Earth, with an energy-dependent anisotropy of order 0.01%-0.1% and a consistent topology that appears to significantly change at higher energy. The nearest and most recent galactic cosmic-ray sources might stochastically dominate the observation and possibly explain a change in orientation of the anisotropy as a function of energy. However, the diffusion approximation is not able to explain its non-dipolar structure and, in particular, the significant contribution of small angular scale features. Particle propagation within the mean free path in the local interstellar medium might have a major role in determining the properties of galactic cosmic rays, such as their arrival distribution. In particular, scattering on perturbations induced in the local interstellar magnetic field by the heliosphere wake may cause a re-distribution of anisotropic cosmic rays below about 100 TeV toward the direction of the elongated heliotail and of the local interstellar magnetic field in the outer heliosphere. Such scattering processes are considered responsible for the observed TeV cosmic-ray global anisotropy and its fine angular structure.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatially Resolved Proteome Profiling of <200 Cells from Tomato Fruit Pericarp by Integrating Laser-Capture Microdissection with Nanodroplet Sample Preparation

Due to sensitivity limitations, global proteome measurements generally require large amounts of biological starting material, which masks heterogeneity within the samples and differential protein expression among constituent cell types. Methods for spatially-resolved proteomics are being developed to resolve protein expression for distinct single cell types among highly heterogeneous tissues, but have primarily been applied to mammalian systems. Here we evaluate the performance of cell-type-specific proteome analysis of tomato fruit pericarp tissues by a platform integrating laser capture microdissection (LCM) and a recently developed automated sample preparation system (nanoPOTS, Nanodroplet processing in One pot for Trace Samples). Tomato fruits were cryosectioned prior to LCM, and tissues were dissected and captured directly into nanoPOTS chips for processing. Following processing, samples were analyzed by nanoLC-MS/MS. Approximately 1900 unique peptides and 422 proteins were identified on average from ~0.04 mm2 tissues comprising ~ 8-15 parenchyma cells. Spatially-resolved proteome analyses were performed using cells of outer epidermis, collenchyma, and parenchyma. Using =200 cells, a total of 1,870 protein groups were identified and the various tissues were easily resolved. The results provide spatial and tissue-specific insights into key enzymes and pathways involved in carbohydrate transport and source-sink relationships in tomato fruit. Of note, at the time of fruit ripening studied here, we identified differentially abundant proteins throughout the pericarp related to chlorophyll biogenesis, photosynthesis, and especially transport.

Liang, Yiran↗

Transition to turbulence and noise radiation in heated coaxial jet flows

Laminar-turbulent transition and noise radiation of a parametrized set of subsonic coaxial jet flows with a hot primary (core) stream are investigated numerically by Large-Eddy Simulation (LES) and direct noise computation. This study extends our previous research on local linear stability of heated coaxial jet flows by analyzing the nonlinear evolution of initially laminar flows disturbed by a superposition of small-amplitude unstable eigenmodes. First, a baseline configuration is studied to shed light on the flow dynamics of coaxial jet flows. Subsequently, LESs are performed for a range of Mach and Reynolds numbers to systematically analyze the influences of the temperature and the velocity ratios between the primary and the secondary (bypass) stream. The results provide a basis for a detailed analysis of fundamental flow-acoustic phenomena in the considered heated coaxial jet flows. Increasing the primary-jet temperature leads to an increase of fluctuation levels and to an amplification of far-field noise, especially at low frequencies. Strong mixing between the cold bypass stream and the hot primary stream as well as the intermittent character of the flow field at the end of the potential core lead to a pronounced noise radiation at an aft angle of approximately 35{sup ∘}. The velocity ratio strongly affects the shear-layer development and therefore also the noise generation mechanisms. Increasing the secondary-stream velocity amplifies the dominance of outer shear-layer perturbations while the disturbance growth rates in the inner shear layer decrease. Already for r{sub mic} > 40R{sub 1}, where r{sub mic} is the distance from the end of the potential core and R{sub 1} is the core-jet radius, a perfect 1/r{sub mic} decay of the sound pressure amplitudes is observed. The potential-core length increases for higher secondary-stream velocities which leads to a shift of the center of the dominant acoustic radiation in the downstream direction.

42 ENGINEERING↗